The Frosted Bloom Teardrop is a lacy Christmas ornament with a six-petal flower at its center. A circle of single crochet frames the flower, and two rings of open bars follow the teardrop outline. A small chain loop at the point lets it hang straight from a branch.
The sample is worked in one color, a soft cream cotton. On a tree, a single neutral shade looks like frost or old lace and works with red, gold, or natural decorations. Cotton also holds its shape well after blocking, which keeps the point crisp.
This pattern uses US crochet terms. The finished ornament measures 5.5 in (14.0 cm) wide × 6.25 in (15.9 cm) tall, not counting the hanging loop, which adds about 0.75 in (1.9 cm).
Construction is simple and all in rounds. You work the flower center and petals first, then add a chain-arch frame and a single crochet circle. Next comes one shaping round that makes the teardrop: open bars across the bottom and a fan of tall stitches at the top. A single crochet outline, an outer ring of bars, and a final edge with the hanging loop finish the piece. You never turn your work; the right side faces you throughout.
Finished Size and Construction
- Finished size: 5.5 in (14.0 cm) wide × 6.25 in (15.9 cm) tall, plus a 0.75 in (1.9 cm) loop
- Skill level: Intermediate (tall stitches and chain-loop petals)
- Terminology: US
- Yarn weight: DK / light worsted (#3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 1 (single ornament, no joining)
- Layout: One teardrop worked in rounds from the center
- Circle size (Round 4): 3 in (7.6 cm) across
- Size before border (after Round 6): 4.25 in (10.8 cm) wide × 5 in (12.7 cm) tall
- Border depth (Rounds 7–8): 5/8 in (1.6 cm) on every side
Materials
Choose a smooth, mercerized or combed cotton in DK weight. Cotton gives clear stitch definition and blocks to a firm, flat shape. Acrylic will work, but it won’t hold the point as sharply unless you stiffen it.
- Cream (one color only): 20 g, about 46 m (50 yd)
Tools:
- 3.5 mm (E-4) crochet hook
- Tapestry needle
- Scissors
- 2 locking stitch markers
- Rust-proof pins and a blocking mat or foam board
- Spray bottle with water
- Optional: fabric stiffener or starch spray
The yarn amount includes a margin of about 25% for your gauge test and for weaving in ends.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet (yo twice)
- dtr – double treble: yo 3 times, insert hook, pull up a loop, (yo, draw through 2 loops) 4 times
- trtr – triple treble: yo 4 times, insert hook, pull up a loop, (yo, draw through 2 loops) 5 times
- st(s) – stitch(es)
- sp(s) – space(s)
- sk – skip
- rep – repeat
Special stitch – Petal: Ch 13, sl st in the same sc to form a narrow loop. Work into each chain of the loop (not around it): sc in the 1st ch, hdc in the next ch, dc in the next 2 ch, hdc in the next ch, sc in the next ch; (sc, ch 2, sc) in the 7th ch (petal tip); sc in the next ch, hdc in the next ch, dc in the next 2 ch, hdc in the next ch, sc in the last ch; sl st in the same base sc. Each Petal has 14 stitches plus a ch-2 tip. The two halves of the loop press together, which makes the center line down each petal.
Bar Unit (used in Rounds 5 and 7): Dc in next st, ch 1, sk next st, dc in next st, ch 1. (Covers 3 sts.)
Gauge and Checkpoints
Gauge: 20 sc = 4 in (10.2 cm) with a 3.5 mm hook.
This ornament is small, so it makes a good gauge test by itself. Work Rounds 1–4 first and measure before you continue. Every later measurement depends on this circle.
Checkpoints (measured flat, before blocking):
- After Round 2: flower about 2.5 in (6.4 cm) across, tip to tip
- After Round 4: circle 3 in (7.6 cm) across
- After Round 6: 4.25 in (10.8 cm) wide × 5 in (12.7 cm) tall
- After Round 8: 5.5 in (14.0 cm) wide × 6.25 in (15.9 cm) tall
A difference of up to 1/8 in (0.3 cm) is fine. If your Round 4 circle is larger than 3.25 in (8.3 cm), go down to a 3.25 mm hook. If it is smaller than 2.75 in (7.0 cm), go up to a 3.75 mm hook. Keep the stitch counts the same and let the hook size change the measurements.

Pattern
Round 1 – Center Ring
Ch 6, sl st in the first ch to form a ring.
Ch 1, work 12 sc into the ring. Sl st in the first sc to join. (12 sc)
The ring leaves an open center hole about 3/8 in (1.0 cm) across. Don’t pull it closed.
Round 2 – Petals
Make a Petal in the current sc, sl st in the next sc, sl st in the following sc; rep from * 5 more times. The final sl st lands in the first sc of the round and works as the join. (6 Petals, each 14 sts + ch-2 tip)
Each Petal uses 2 sc of Round 1: one as its base and one as the gap before the next Petal. 6 × 2 = 12, so the round comes out even.
Fasten off. Lay the flower flat and nudge the petals so they are evenly spaced. Each petal should be about 1 in (2.5 cm) long.
Round 3 – Chain-Arch Frame
Choose one petal as the top of the ornament. Join yarn in its ch-2 tip.
Ch 1, sc in the same ch-2 tip, ch 7. Sc in the ch-2 tip of the next Petal, ch 7; rep from * 4 more times. Sl st in the first sc to join. (6 sc + 6 ch-7 sps = 48 sts counting chains)
The arches should curve slightly between the petals without pulling the tips inward.
Round 4 – Circle
Ch 1, sc in the first sc, 7 sc in the next ch-7 sp. Sc in the next sc, 7 sc in the next ch-7 sp; rep from * 4 more times. Sl st in the first sc to join. (48 sc)
This is a conversion round: 6 sc worked one per existing sc + 42 sc worked into the arches (6 × 7) = 48 sc.
Place a marker in the first sc. This is st 1, centered above the top petal. Number the rest of the stitches in the direction you worked, so st 25 sits above the bottom petal tip. Fasten off.
Checkpoint: circle 3 in (7.6 cm) across.
Round 5 – Teardrop Shaping
This round puts open bars around the bottom and a fan of tall stitches at the top, centered on st 1.
Join yarn in st 6. Ch 3 (counts as first dc), ch 1, sk st 7, dc in st 8, ch 1. Work 12 more Bar Units over sts 9–44, but leave off the final ch 1 of the last unit. That makes 13 Bar Units in total over sts 6–44.
Fan: hdc in st 45, dc in st 46, tr in st 47, dtr in st 48, (trtr, ch 3, trtr) in st 1, dtr in st 2, tr in st 3, dc in st 4, hdc in st 5. Sl st in the top of the beginning ch-3 to join.
Count: 26 dc + 25 ch-1 sps in the bars; 10 fan sts + 1 ch-3 point sp.
The bars cover 39 sts (sts 6–44), which is exactly 13 units of 3. The fan covers the other 9 sts (45–48 and 1–5), and 39 + 9 = 48. The skipped stitch of the 7th unit is st 25, so the 13th ch-1 sp sits at the bottom center.
Round 6 – Teardrop Outline
Ch 1, sc in the same st as the join. Sc in the next ch-1 sp, sc in the next dc; rep from * across the bars, working 2 sc in the 13th (bottom-center) ch-1 sp. This gives 26 sc in the dc + 25 sc in the sps + 1 extra = 52 sc.
Fan, side one: sc in the hdc, sc in the dc, 2 sc in the tr, 2 sc in the dtr, 2 sc in the trtr. (8 sc)
Point: (2 sc, ch 2, 2 sc) in the ch-3 sp. (4 sc + ch-2 sp)
Fan, side two: 2 sc in the trtr, 2 sc in the dtr, 2 sc in the tr, sc in the dc, sc in the hdc. (8 sc)
Sl st in the first sc to join. (72 sc + ch-2 point sp)
This round is the base for the border: 52 + 8 + 4 + 8 = 72. Each half, from the point to the bottom center, has 36 sc (2 point sc + 8 fan sc + 26 bottom sc). Fasten off.
Checkpoint: 4.25 in (10.8 cm) wide × 5 in (12.7 cm) tall.
Border
The border is Rounds 7 and 8. It adds 5/8 in (1.6 cm) on every side. Border gauge: each Bar Unit covers 3 sc of Round 6, which is about 0.6 in (1.5 cm) along the edge.
Round 7 – Outer Bars
Join yarn in the ch-2 point sp of Round 6. Ch 6 (counts as dc + ch 3), dc in the same sp, ch 1. This makes the point.
Work 24 Bar Units around all 72 sc of Round 6. The last unit ends with ch 1. Sl st in the 3rd ch of the beginning ch-6 to join.
Counts per side (point to bottom center):
- Side one: 25 dc (1 point dc + 24 dc from 12 units) and 24 ch-1 sps
- Bottom center: 1 ch-1 sp (the final ch 1 of unit 12)
- Side two: 25 dc (24 dc from 12 units + the beginning ch-6 dc) and 24 ch-1 sps
- Point: 1 ch-3 sp
Total: 50 dc, 49 ch-1 sps, 1 ch-3 sp.
Why the math works: 72 sc ÷ 3 = 24 units, with no partial unit left over, and each half (36 sc) takes exactly 12 units. The unit is dc–skip–dc, so it reads the same from either end and both sides of the teardrop match. Working 2 dc over every 3 sc, with chains between, lets the band widen just enough to lie flat around the curve.
Round 8 – Edge and Hanging Loop
Sl st into the ch-3 point sp. Ch 1, sc in the sp, ch 10, sc in the same sp (hanging loop made).
Sc in each dc and in each ch-1 sp around. Sl st in the first sc to join.
Counts per side:
- Side one: 25 sc in dc + 24 sc in sps = 49 sc
- Bottom center: 1 sc
- Side two: 25 sc in dc + 24 sc in sps = 49 sc
- Point: 2 sc + ch-10 loop
Total: 49 + 1 + 49 + 2 = 101 sc, plus the loop.
This round works 1 sc into each stitch and space (50 + 49 = 99) plus 2 sc in the point, so every part of Round 7 is covered once. Fasten off and weave in all ends along the back of the sc rounds.
Checkpoint: 5.5 in (14.0 cm) wide × 6.25 in (15.9 cm) tall, with a loop about 0.75 in (1.9 cm) tall.
Final Blocking
- Weave in all ends securely before blocking.
- Spray the ornament until it is evenly damp but not dripping. You can also soak it in cool water and roll it in a towel.
- Lay it right side up on the blocking mat.
- Pin the point first, then the bottom center, 6.25 in (15.9 cm) apart.
- Pin the widest point on each side, 5.5 in (14.0 cm) apart and about 2.25 in (5.7 cm) up from the bottom edge.
- Add pins every 1/2 in (1.3 cm) along the edge. Ease the sides into straight lines that taper evenly to the point.
- Open each ch-1 bar space evenly, and spread the petals so the center hole is round.
- For a stiffer ornament, spray lightly with fabric stiffener now.
- Let it dry completely, for at least 12 hours, before unpinning.
Final Quality-Control Checklist
- Center hole is open, about 3/8 in (1.0 cm) across
- Six petals, each 14 sts with a ch-2 tip and a clear center line
- Round 4 has 48 sc, and the circle measures 3 in (7.6 cm)
- Round 5 has 26 bar dc, 25 ch-1 sps, and a 10-stitch fan
- Round 6 has 72 sc, 36 in each half
- Round 7 has 50 dc and 49 ch-1 sps, and both sides match
- Round 8 has 101 sc and a secure loop
- Final size is 5.5 in (14.0 cm) × 6.25 in (15.9 cm)
- The ornament hangs straight from its loop without twisting
Troubleshooting
Petals twist or curl. Work the Petal stitches into the chains, not around the loop, and keep your chains a little loose.
Arches pull the petals inward. Your chains are too tight. Rework Round 3 with slightly looser ch-7 arches, or go up a hook size for that round only.
The point is rounded, not sharp. Check that you worked (trtr, ch 3, trtr) in st 1 and (2 sc, ch 2, 2 sc) in Round 6. Pin the point firmly when blocking.
Bars cup or bow upward. Your dc may be tighter than your sc. Work the dc slightly looser, and pin the bars open during blocking.
The outer edge ripples. Work Round 8 with a hook one size smaller (3.25 mm). Keep the same stitch count.
Sides don’t match. Recount Round 6: each half must have 36 sc. Extra or missing stitches there will make the border lopsided.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and dry flat, re-pinning the point if needed. If you stiffened the ornament, apply stiffener again after washing.

Final Notes
The measurement chain is short and easy to check. The flower is about 2.5 in (6.4 cm), and the Round 4 circle is 3 in (7.6 cm). After Round 6, the shaped teardrop measures 4.25 in (10.8 cm) × 5 in (12.7 cm). The 5/8 in (1.6 cm) border brings it to 5.5 in (14.0 cm) × 6.25 in (15.9 cm). Measure the circle before you start shaping. If it’s the right size, the rest will follow.
Make one in cream for a frosty look, or use the same pattern in red or gold cotton for a bolder ornament.
Happy crocheting!