These lace curtain panels are worked in warm mustard gold with cream accents. Each panel has four stacked monogram medallions. Each medallion is a cream disc with a raised gold letter C, framed by a ridged gold ring, with gold S-scrolls and cream flowers set on an open mesh around it.
The look is vintage Irish-lace style, but it’s built from plain stitches. A gold ladder border runs down both long sides, four corded hanging loops sit along the top, and a cream picot scallop edge finishes the bottom.
This pattern uses US crochet terms. Each finished panel measures 17 in x 53 in (43.2 cm x 134.6 cm) across the lace body. The scallops add 2 in (5.1 cm) and the loops add 3 in (7.6 cm), so the total hanging length is 58 in (147.3 cm). The pattern makes two identical panels that hang separately.
Construction overview: for each panel, crochet four square motifs from the center out. Block them, sew on the appliqués (a C, flowers and scrolls), and join the motifs into a vertical column. Then work a five-round ladder border, add the hanging loops along the top edge and the scallops along the bottom edge.
Finished Size and Construction
- Finished panel size: 17 in x 53 in (43.2 cm x 134.6 cm), plus 2 in (5.1 cm) of scallops and 3 in (7.6 cm) of loops
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4) mercerized cotton
- Hook: 4.5 mm (US 7)
- Number of pieces: 2 separate panels; each panel is 4 square motifs plus appliqués
- Layout per panel: 1 motif wide x 4 motifs tall
- Motif size: 12 in (30.5 cm) square, 41 sts per side
- Size before border: 12 in x 48 in (30.5 cm x 121.9 cm)
- Border depth: 2.5 in (6.4 cm) per side
Materials
Use a smooth, mercerized worsted cotton. It gives crisp stitch definition, holds the raised C and scrolls well, and doesn’t stretch out of shape when hung. Don’t use acrylic, because it softens the lace and the panels will sag.
- Mustard gold: 700 g, about 1,190 m
- Cream: 150 g, about 255 m
- 4.5 mm (US 7) crochet hook
- Tapestry needle
- Stitch markers
- Rust-proof pins and a blocking surface at least 20 in x 60 in (50.8 cm x 152.4 cm)
- Measuring tape
These quantities are for both panels and include a margin of about 10%.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- BLO – back loop only
- sk – skip
- sp(s) – space(s)
- st(s) – stitch(es)
- RS / WS – right side / wrong side
Picot: ch 3, sl st in 3rd ch from hook.
Stitch counting rule: a chain worked over a skipped stitch counts as one stitch per chain. A motif’s “41 sts per side” includes both corner stitches on that side.
Gauge and Checkpoints
Make one complete motif first, including Round 13. Block it before you make the rest.
- After Round 3 (cream disc): 3.5 in (8.9 cm) across
- After Round 7: 6.5 in (16.5 cm) square
- After Round 11: 10.75 in (27.3 cm) square
- After Round 12: 11.75 in (29.8 cm) square
- After Round 13, blocked: 12 in (30.5 cm) square, 41 sts per side
This works out to about 3.4 sts per inch (2.5 cm) along the edge. If the blocked motif is bigger than 12.25 in (31.1 cm), go down 0.5 mm in hook size. If it’s smaller than 11.75 in (29.8 cm), go up 0.5 mm. All eight motifs need to match, so check each one against the first.

Square Motif (make 8 total, 4 per panel)
Round 1 (cream): Ch 4 and sl st to form a ring. Ch 3 (counts as dc), then work 15 dc in the ring. Sl st to the top of the ch-3. (16 dc)
Round 2: Ch 3, dc in the same st, then work 2 dc in each st around. Join. (32 dc)
Round 3: Ch 3, 2 dc in next st, dc in next st, 2 dc in next st 15 times. Join. (48 dc) Fasten off the cream.
Round 4 (gold): Join gold in any st. Ch 1, sc in each st around. Join. (48 sc)
Round 5: Ch 1, sc in BLO of each st around. Join. (48 sc) The unused front loops make the raised gold ring around the disc.
Round 6: Ch 5 (counts as dc + ch 2), sk 2, dc in next st, ch 2, sk 2 15 times. Join to the 3rd ch of the ch-5. (16 dc, 16 ch-2 sps)
Round 7 (squaring): Sl st into the first ch-2 sp. Ch 4 (counts as tr), then work (tr, ch 3, 2 tr) in the same sp. 3 dc in next sp, 3 hdc in next sp, 3 dc in next sp, (2 tr, ch 3, 2 tr) in next sp 3 times, ending the last repeat at **. Join. (52 sts: 13 per side between the corner ch-3 sps)
Round 8: Sl st in next tr and into the corner sp. Ch 3, then work (dc, ch 3, 2 dc) in the same sp. Dc in each of next 13 sts, (2 dc, ch 3, 2 dc) in corner sp 3 times, dc in each of next 13 sts. Join. (68 sts: 17 per side)
Round 9 (mesh): Sl st in next dc and into the corner sp. Ch 6 (counts as dc + ch 3), then dc in the same sp. Ch 2, sk 2, (dc in next st, ch 2, sk 2) 5 times, (dc, ch 3, dc) in corner sp 3 times. Ch 2, sk 2, (dc in next st, ch 2, sk 2) 5 times. Join. (76 sts: 19 per side, with 6 ch-2 sps per side)
Round 10: Sl st into the corner sp. Ch 6, then dc in the same sp. Ch 2, (dc in next dc, ch 2) 7 times, (dc, ch 3, dc) in corner sp 3 times. Ch 2, (dc in next dc, ch 2) 7 times. Join. (100 sts: 25 per side, with 8 ch-2 sps per side)
Round 11: Work the same as Round 10, but repeat (dc in next dc, ch 2) 9 times per side. (124 sts: 31 per side, with 10 ch-2 sps per side)
Round 12 (solid): Sl st into the corner sp. Ch 3, then work (2 dc, ch 2, 3 dc) in the same sp. Work dc in each dc and 2 dc in each ch-2 sp along the side, then (3 dc, ch 2, 3 dc) in each corner sp. Join. Each side has 31 sts worked one per existing stitch, plus 6 corner dc, for 37 per side. (148 sts, plus 4 ch-2 sps)
Round 13 (trim): Ch 1. Sc in each dc, and work 3 sc in each corner ch-2 sp. The middle sc of each group is the corner st. Join and fasten off. Each side has 37 sts worked one per existing stitch, plus 4 corner-group sc, for 41 sts per side including both corners. (160 sc)
Appliqués
Monogram C (gold, make 8): Ch 12. Sc in 2nd ch from hook and in each ch across. (11 sc) Ch 1 and turn. Work 2 hdc in each st across. (22 hdc) The piece will curl into a C. For the edging, ch 1 and turn. Sc in each hdc (22), then 2 sc down the row ends, 11 sc along the foundation chain and 2 sc up the other row ends. Sl st to the first sc. (37 sc) The finished C is 2.75 in (7.0 cm) tall.
Large flower (cream, make 8): Make a magic ring. Ch 1 and work 10 sc in the ring, then join. (10 sc) Ch 3, sk 1, sl st in next st 5 times. (5 loops) In each loop, work (sc, hdc, 3 dc, hdc, sc). Join. (5 petals, 35 sts) The flower is 2.25 in (5.7 cm) across.
Small flower (cream, make 16): Make a magic ring. Ch 3, 2 dc in ring, ch 3, sl st in ring 5 times. Pull the ring closed. (5 petals) The flower is 1.5 in (3.8 cm) across.
Scroll (gold, make 16): Ch 41. Hdc in 3rd ch from hook and in each ch across. (39 hdc) The strip is 10.5 in (26.7 cm) long.
Placement: Use matching yarn to sew each piece on through its back loops.
- Sew the C over the cream disc with its opening facing right.
- Center one large flower on the mesh directly above the ring.
- Sew one small flower on each side of the ring.
- Shape two scrolls into mirrored S-curves, one on each side of the ring, each about 7 in (17.8 cm) tall. Coil the outer ends into tight spirals near the corners.
Make All Pieces
These totals are for both panels:
- Cream: 8 motif centers (Rounds 1–3), 8 large flowers, 16 small flowers, 2 scallop edges
- Gold: 8 motifs (Rounds 4–13), 8 Cs, 16 scrolls, 2 borders, 8 hanging loops
Layout for each panel, from top to bottom:
[ Motif 1 ]
[ Motif 2 ]
[ Motif 3 ]
[ Motif 4 ]
Before joining, check that every C on a panel faces the same way.
Joining
Use a gold slip stitch seam. Hold two motifs WS together with the bottom edge of the upper motif against the top edge of the lower motif. Working through the outer loops of both layers, sl st from corner st to corner st. That’s 41 sts matched one-to-one, including both corners. Don’t add any stitches at the ends of the seam.
Each panel has 3 seams. Keep the tension loose and even, and stretch the seam slightly every 10 sts. If the seam is tight, the column will pucker. If that happens, go up 0.5 mm in hook size for the seams only.
Checkpoint: the joined column measures 12 in x 48 in (30.5 cm x 121.9 cm). Each long side has 4 x 41 = 164 sts, and each short side has 41 sts. The outer corner sts count toward both their long side and their short side.
Border
Border gauge: the border keeps the motif rate of about 3.4 sts per inch (2.5 cm), so 166 sts span 48.5 in (123.2 cm). Use gold throughout.
Rnd 1: Join at any outer corner. Ch 1, then sc in each st around, working 3 sc in each of the 4 outer corner sts. Join. Each long side has 164 + 2 = 166 sts, and each short side has 41 + 2 = 43 sts, both counts including the corners. (414 sc)
Rnd 2 (ladder): Sl st to a corner st. Ch 7 (counts as tr + ch 3) and tr in the same st. Then work as follows:
- Long sides: (ch 2, sk 2, tr in next st) 55 times, ending on the corner st, then (ch 3, tr) in that same corner st.
- Short sides: repeat the same pattern 14 times.
Join. The tr posts lie sideways and become the ladder rungs. Each long side has 166 sts and 55 ch-2 sps, and each short side has 43 sts. (418 sts, plus 4 ch-3 corners)
Rnd 3 (rail): Ch 1. Sc in each tr, 2 sc in each ch-2 sp and 5 sc in each corner ch-3 sp. The middle sc of each 5-sc group is the corner st. Long sides have 166 + 6 = 172 sts and short sides have 43 + 6 = 49 sts. (438 sc)
Rnd 4 (ladder): Work the same as Rnd 2, with 57 repeats along each long side and 16 along each short side. (442 sts, plus 4 ch-3 corners)
Rnd 5 (rail): Work the same as Rnd 3, but use 3 sc in each corner sp. Long sides have 176 sts and short sides have 53 sts. (454 sc) Fasten off.
Why the math works: each ladder round needs (3 x repeats) + 1 sts per side: 166 = 3 x 55 + 1, 43 = 3 x 14 + 1, 172 = 3 x 57 + 1 and 49 = 3 x 16 + 1. Rnd 3 uses 5-sc corners to make 172 and 49 fit that formula. Rnd 5 uses 3-sc corners because no ladder round follows it.
Hanging loops (gold, top short side, 53 sts): With RS facing, join in the corner st. Ch 1, then sc in the first 2 sts. In the next st, work sc, then ch 24 and sl st in that same sc. Work 30 sc into the ch-24 loop. Sc in the next 15 sts. Repeat from * 3 more times, but on the last repeat replace “sc in next 15 sts” with “sc in last 2 sts”. Fasten off. This puts loops on sts 3, 19, 35 and 51, so the end loops are the same distance from each corner. Each loop hangs 3 in (7.6 cm).
Scallops (cream, bottom short side, 53 sts):
- Row 1: Join in the corner st. Ch 1, sc in the same st, ch 5, sk 3, sc in next st 13 times. (13 loops; 1 + 4 x 13 = 53)
- Row 2: Ch 1 and turn. Sc in the first sc, 9 dc in next loop, sc in next loop 6 times, 9 dc in the last loop, sc in the last sc. (7 fans)
- Row 3: Ch 1 and turn. Sc in the first sc. For each fan: sc in the first dc, then (picot, sc in next 2 dc) 4 times, then sl st in the sc between fans. Fasten off.
The scallops are 2 in (5.1 cm) deep.
Final Blocking
- Weave in all ends before blocking.
- Soak each panel in cool water for 15 minutes.
- Press the water out in a towel. Don’t wring.
- Pin the body out to 17 in x 53 in (43.2 cm x 134.6 cm), with the long edges straight.
- Pin each ladder rung straight across.
- Pin each scallop to 2 in (5.1 cm) deep and open each picot.
- Pin each loop into a teardrop 3 in (7.6 cm) long.
- Lift the raised C, the scrolls and the flowers with your fingertips so they stand up from the mesh.
- Leave the panel to dry flat completely before you unpin it.
Final Quality-Control Checklist
- Every motif is 12 in (30.5 cm) square, with 41 sts per side.
- All Cs face right.
- Each seam matches 41 sts, from corner to corner.
- Border Rnd 1 has 166 sts on each long side and 43 on each short side.
- The ladder rungs are evenly spaced and the ends line up at the corners.
- The panel is 17 in x 53 in (43.2 cm x 134.6 cm).
- There are 7 scallops and 4 loops per panel.
- Both panels match within 0.5 in (1.3 cm).
Troubleshooting
- Motif cups: your Round 12 corners are too tight, so loosen the corner groups.
- Motif ruffles: your mesh chains are too loose, so tighten each ch-2.
- Ladder repeats don’t land on the corner: recount Rnd 1 or Rnd 3. Long sides must have 166 or 172 sts.
- C uncurls: sew it down at five points before you sew the outline.
- Panel leans: re-block it and pin to a squared line.
- Loops stretch: sc more firmly over the loop chain.
Care
Hand wash in cool water with mild soap, then dry flat and re-pin if needed. Don’t tumble dry, and keep the panels out of strong direct sun for long periods to protect the gold.

Final Notes
The measurement chain:
- Each motif is 12 in (30.5 cm) with 41 sts per side.
- Four motifs make a 12 in x 48 in (30.5 cm x 121.9 cm) column with 164 sts per long side.
- Border Rnd 1 brings each long side to 166 sts.
- The 2.5 in (6.4 cm) border gives a 17 in x 53 in (43.2 cm x 134.6 cm) panel.
- The scallops and loops bring the total hanging length to 58 in (147.3 cm).
Check every stage before you move on, and the two panels will hang evenly side by side.
Happy crocheting!