Starlit Doorway Star Curtain Crochet Pattern

The Starlit Doorway curtain is a light, airy door or window curtain made from rows of lacy five-point stars. Each star has an open center ring, five three-stitch spokes, and a chain-lace frame. Its edge is shaped so that every point ends in a small picot. Short chain diamonds link the stars into long hanging strands.

The sample alternates cobalt blue and cream strands: four blue and three cream, hung blue-cream-blue-cream across a wooden rod. The look is crisp and graphic, and the curtain stays bright and see-through, so light still comes through the doorway.

This pattern uses US crochet terms. The finished curtain is 33.5 in (85.1 cm) wide when hung and each strand drops 71.5 in (181.6 cm) from the top fold of its hanging loop. Every star measures 3.5 in (8.9 cm) across from point to point.

Construction is modular. You make 105 separate stars in four rounds, then join them into seven strands with crocheted chain-diamond links. Each strand gets a top tab with a hanging loop and a small diamond drop at the bottom. The strands are not joined to each other, so the curtain parts easily when you walk through.

Finished Size and Construction

  • Finished size: 33.5 in (85.1 cm) wide x 71.5 in (181.6 cm) drop
  • Skill level: Easy-Intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK (light worsted, #3) mercerized cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 105 stars, joined into 7 strands of 15 stars
  • Layout: 7 strands, spaced 5 in (12.7 cm) apart center to center
  • Piece size: 3.5 in (8.9 cm) point to point; 2.5 in (6.4 cm) from top picot to bottom valley
  • Size before border: each linked star section is 65.5 in (166.4 cm) long
  • Border depth: top tab 4 in (10.2 cm), bottom drop 2 in (5.1 cm)

Materials

Choose a smooth, tightly plied mercerized cotton. It shows the lace clearly, holds the star points crisp after blocking, and doesn’t stretch much as it hangs. Avoid fuzzy or very stretchy yarns: a long strand will grow under its own weight.

  • Color A, cobalt blue: 250 g, approx. 550 m (601 yd), for 60 stars and 4 strands of links
  • Color B, cream: 200 g, approx. 440 m (481 yd), for 45 stars and 3 strands of links

These amounts assume a cotton of about 110 m (120 yd) per 50 g. Each star uses about 3 g. Each finished strand, including links, tab, and drop, uses about 54 g. The quantities above include a margin of roughly 15-25% for gauge differences and swatching.

Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– Scissors
– Stitch marker
– Blocking mat and rustproof pins
– Spray bottle
– Ruler or tape measure
– Curtain rod, up to 1.25 in (3.2 cm) in diameter

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • dtr – double treble crochet (yarn over 3 times, insert hook, pull up a loop, [yarn over, pull through 2 loops] 4 times)
  • sp(s) – space(s)
  • rep – repeat

Special stitch – ch-4 picot: Ch 4, sl st in the first ch of those 4. This makes the small loop at each star tip.

Gauge and Checkpoints

Chain gauge: 5 ch = 1 in (2.5 cm), so 10 ch = 2 in (5.1 cm). Chain length matters most here because the links, the tabs, and the shape of the star frame are all made of chains.

Make one star first and check it at each stage:

  • After Round 1: the ring is about 1.25 in (3.2 cm) across.
  • After Round 2: the spoke circle is about 2 in (5.1 cm) across.
  • After Round 3: the chain frame is about 3 in (7.6 cm) across.
  • After Round 4, blocked: 3.5 in (8.9 cm) point to point, and 2.5 in (6.4 cm) from top picot to bottom valley.

If your star is too big, go down 0.5 mm in hook size, or chain more firmly. If it’s too small, go up 0.5 mm. A star that is 1/4 in (0.6 cm) too wide is only a small problem, but over 15 stars a 1/8 in (0.3 cm) error in the picot-to-valley height already adds 1.9 in (4.8 cm) to each strand.

Blue macramé ornament with intricate six-pointed geometric pattern and twisted cord detail against white.

Star Motif (Make 105)

The star is worked in joined rounds with the right side facing throughout. Don’t turn.

Ring: Ch 10, sl st in first ch to form a ring.

Round 1: Ch 1, 15 sc in ring, sl st in first sc to join. (15 sc)

Round 2 (spokes): Ch 3 (counts as dc), dc in next 2 sc, ch 3, dc in next 3 sc, ch 3; rep from * 3 more times, sl st in top of beginning ch-3 to join. (15 dc in 5 groups of 3; 5 ch-3 sps)*

Each 3-dc group becomes the spoke that points into one star point. Each ch-3 sp sits under a valley.

Round 3 (chain frame): Sl st in next 2 dc, sl st in next ch-3 sp. Ch 1, sc in same ch-3 sp (first valley sc). Ch 7, sc in middle dc of next 3-dc group (tip sc), ch 7, sc in next ch-3 sp (valley sc); rep from * 4 more times, but on the last rep skip the final valley sc and sl st in the first sc to join. (10 sc: 5 tip sc and 5 valley sc; 10 ch-7 sps)*

Check the count: every rep has 1 tip sc and 1 valley sc. The fifth valley sc is the one you made at the start, so the total is 5 + 5 = 10 sc.

Round 4 (shaped edge): Ch 1, sc in same sc as join (valley sc made).
In next ch-7 sp work (sc, hdc, dc, ch 1, tr) for the rising edge.
In next tip sc work (dtr, ch-4 picot, dtr) for the point.
In next ch-7 sp work (tr, ch 1, dc, hdc, sc) for the falling edge.
*
Sc in next valley sc. Rep from * 3 more times, then rep from * to ** once more. Sl st in first sc to join. Fasten off, leaving a 6 in (15.2 cm) tail.

Round 4 count: each point has 4 stitches on the rising edge, 2 dtr at the tip, 4 stitches on the falling edge, and 1 valley sc, so 4 + 2 + 4 + 1 = 11 stitches. Five points make 55 stitches, 10 ch-1 sps, and 5 picots.

The stitch heights step up from sc to dtr toward each tip, then back down to sc, which is what pulls the round frame into a sharp star. The ch-1 sps keep the edge lacy and open.

Weave in the ends. Don’t block yet; blocking happens on the whole strand.

Make All Pieces

  • Color A (blue): 60 stars (4 strands x 15)
  • Color B (cream): 45 stars (3 strands x 15)
  • Total: 105 stars

Each strand uses stars of one color only, and its links, tab, and drop are made in the same color.

Layout grid (columns are strands, left to right; rows are stars, top to bottom):

Strand:   1  2  3  4  5  6  7
Tab:      A  B  A  B  A  B  A
Star 1:   A  B  A  B  A  B  A
Star 2:   A  B  A  B  A  B  A
  ...     (repeat the same color for each strand)
Star 15:  A  B  A  B  A  B  A
Drop:     A  B  A  B  A  B  A

Joining (Diamond Links)

Before joining, decide on the orientation of each star. Pick any point as the top point. The bottom valley is the valley sc directly opposite it, with two points on either side.

Each link connects the bottom valley sc of the upper star to the top-point picot of the lower star. It has a 2-ch upper stem, a diamond made of two 8-ch sides, and a 2-ch lower stem.

Link (make 14 per strand, 98 total):

  1. With the right side facing, join yarn with a sl st in the bottom valley sc of Star 1.
  2. Ch 2 (upper stem), ch 8 (first diamond side), ch 2 (lower stem).
  3. Sl st in the ch-4 picot at the top point of Star 2.
  4. Sl st in each of the 2 lower-stem ch, working back up.
  5. Ch 8 (second diamond side).
  6. Sl st in each of the 2 upper-stem ch.
  7. Sl st in the same valley sc of Star 1. Fasten off and weave in.

Link count: 20 ch in total (2 + 8 + 2 + 8), and the two 8-ch sides make a 16-ch diamond. Each end attaches to exactly one stitch: one valley sc above and one picot below. No stitches are added to the stars themselves, so their 55-stitch count stays the same.

Rep the link between Star 2 and Star 3, and so on, until all 15 stars in the strand are joined by 14 links.

Tension: Chain at your gauge tension, 5 ch per inch. Chains that are too loose make droopy, uneven links. Chains that are too tight pucker the star tips. Keep the sl sts back along the stems snug so the stems look like neat doubled bars.

Size checkpoint: Once 3 stars are joined with 2 links, hang the piece and measure from the top picot of Star 1 to the bottom valley of Star 3. It should be 2.5 + 2 + 2.5 + 2 + 2.5 = 11.5 in (29.2 cm), which means each link measures 2 in (5.1 cm).

A full strand of 15 stars and 14 links measures 15 x 2.5 in + 14 x 2 in = 65.5 in (166.4 cm).

Border (Top Tabs and Bottom Drops)

A strand curtain has no wraparound border on purpose: a border would tie the strands together and stop them parting. Instead, the “border” is the finishing at each end of the strand. It uses the same chain gauge and the same 16-ch diamond as the links.

Border gauge: 5 ch = 1 in (2.5 cm).

Top tab (make 1 per strand, 7 total):

  1. Join yarn with a sl st in the top-point picot of Star 1.
  2. Ch 2 (stem A), ch 8 (first diamond side), ch 2 (stem B), ch 24 (hanging loop).
  3. Sl st in the 25th ch from hook, which is the top ch of stem B, to close the loop.
  4. Sl st in the next ch (lower ch of stem B).
  5. Ch 8 (second diamond side).
  6. Sl st in each of the 2 ch of stem A.
  7. Sl st in the picot. Fasten off and weave in.

Top tab count: 44 ch (2 + 8 + 2 + 24 + 8). The tab measures 4 in (10.2 cm) from the picot to the fold of the loop when hung.

Bottom drop (make 1 per strand, 7 total):

  1. Join yarn with a sl st in the bottom valley sc of Star 15.
  2. Ch 2 (stem), ch 16.
  3. Sl st in the 17th ch from hook (lower stem ch) to close a 16-ch ring.
  4. Sl st in the next stem ch, then sl st in the valley sc. Fasten off.

Bottom drop count: 18 ch (2 + 16). It hangs 2 in (5.1 cm) below the valley.

Why the math works: Every diamond in the strand is a 16-ch perimeter, whether it is two 8-ch sides or one 16-ch ring, so all the diamonds hang at the same size. The 24-ch loop is 4.8 in (12.2 cm) around, which fits over a rod up to 1.25 in (3.2 cm) thick with room to slide. Strand drop = 4 in tab + 65.5 in stars and links + 2 in drop = 71.5 in (181.6 cm).

Final Blocking

  1. Wet each strand fully in cool water and gently squeeze out the water. Don’t wring it.
  2. Roll the strand in a towel to remove extra moisture.
  3. Lay it flat on blocking mats in a straight line.
  4. Pin each star: pin the 5 picots out to 3.5 in (8.9 cm) point to point, and pin the center ring open.
  5. Pull each link straight so the diamond opens. Check 2 in (5.1 cm) from valley to picot.
  6. Measure the full strand, 71.5 in (181.6 cm), and adjust the pins if needed.
  7. Spray the stars lightly to set the points, then let them dry completely before unpinning.

Final Quality-Control Checklist

  • All 105 stars have 55 stitches, 10 ch-1 sps, and 5 picots in Round 4.
  • Every star measures 3.5 in (8.9 cm) point to point.
  • Each strand has 15 stars, 14 links, 1 top tab, and 1 bottom drop.
  • Every link attaches valley sc to picot, with the stars pointing up.
  • Colors run A-B-A-B-A-B-A from left to right.
  • All strands measure 71.5 in (181.6 cm) within 1/2 in (1.3 cm) of each other.
  • All ends are woven in securely, especially at the joins.

Troubleshooting

Star points are rounded, not sharp: Check that the dtr stitches are worked into the tip sc and not into the ch-7 sps. Then block with firmer pins at the picots.

Star cups or ruffles: Your ch-7 sps are too long or too loose. Chain more firmly or try ch 6.

Links are different lengths: Count the chains again. It should be exactly 2 + 8 + 2 on the way down and 8 on the way back up.

A star hangs sideways: The link went into the wrong valley. Remove it and attach it to the valley directly opposite the top point.

Strands grow after hanging: This is normal with cotton. Reblock the strands, or remove one star and link (4.5 in, 11.4 cm) from the strand.

Care

Hand wash in cool water with mild detergent and lay flat to dry, then reblock if needed. Don’t tumble dry, because the long chains can tangle.

Navy blue and cream crocheted star strands with diamond shapes hanging in a sunny window overlooking a green garden.

Final Notes

The measurement chain is simple: 5 ch = 1 in (2.5 cm) gives a 3.5 in (8.9 cm) star that measures 2.5 in (6.4 cm) from picot to valley. Fifteen of these stars with fourteen 2 in (5.1 cm) links make 65.5 in (166.4 cm). Adding the 4 in (10.2 cm) tab and the 2 in (5.1 cm) drop gives a 71.5 in (181.6 cm) strand. Seven strands spaced 5 in (12.7 cm) apart give a 33.5 in (85.1 cm) curtain. To change the length, add or remove one star and link at a time: each pair adds or removes 4.5 in (11.4 cm).

Happy crocheting!

Leave a Comment