This little bell has the crisp blue-and-white look of Delft pottery. A cream lattice of fan-shaped shells forms the body. A solid blue dome sits on top, a firm blue hem with flared tips runs along the bottom, and a small round clapper hangs from the center.
The colors are cobalt blue and cream, and the style is classic and slightly vintage. It looks good on a tree, tied to a gift, or hung in a window, where light shows through the open diamonds. All instructions use US crochet terms.
The finished bell measures about 4.25 in (10.8 cm) wide at the hem tips and 3.25 in (8.3 cm) tall from crown to hem. With the hanging loop and clapper, the full ornament is about 5.75 in (14.6 cm) tall.
You start the cream body at the top with a short single crochet row, then work downward in shell rows and net rows that widen by one shell each tier. A tall-stitch row straightens the bottom edge. The blue crown goes into the other side of the starting chain, then come the blue hem, the clapper, and the hanging loop.
Finished Size and Construction
- Finished size: 4.25 in (10.8 cm) wide at hem tips × 3.25 in (8.3 cm) tall (bell only); 5.75 in (14.6 cm) tall with loop and clapper
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: Fine (#2, sport) mercerized cotton
- Hook: 2.5 mm
- Number of pieces: 1 bell with the crown and loop worked on, plus 1 small clapper sewn on
- Layout: Single ornament; no assembly grid
- Piece size before border: 3.75 in (9.5 cm) wide at the bottom × 3 in (7.6 cm) tall (crown + cream body)
- Border depth: 0.25 in (0.6 cm), blue hem along the bottom edge only
Materials
Yarn: Use a smooth mercerized cotton in fine (#2, sport) weight. Mercerized cotton shows the shells clearly and holds its shape after blocking. Avoid fuzzy or very soft acrylics, because they blur the diamond holes.
- Color A, cream: 6 g, about 25 m
- Color B, cobalt blue: 5 g, about 20 m
These amounts include a margin of about 30% for your gauge swatch and for weaving in ends. One standard ball of each color is enough for many bells.
Tools:
– 2.5 mm crochet hook
– Tapestry needle
– Scissors
– Stitch marker
– Blocking mat and rust-proof pins
– Spray bottle with water
– Ruler or tape measure
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- tr – treble crochet
- sc2tog – single crochet 2 together
- sp – space
- st(s) – stitch(es)
- RS / WS – right side / wrong side
Special stitches:
– Shell: 5 dc in the same st or sp. The center dc is the 3rd dc of the shell.
– V-st: (dc, ch 2, dc) in the same st.
– Edge V: ch 5 (counts as dc + ch 2), dc in the same st.
Gauge and Checkpoints
Gauge: 28 sc and 30 rows = 4 in (10.2 cm) in sc with Color B.
The bell is small, so making one bell is the best swatch. Use these checkpoints as you go, measuring flat without stretching:
- After Row 1: 13 sc = about 1.9 in (4.8 cm) wide.
- After Row 2: about 2.1 in (5.3 cm) wide.
- After Row 4: about 2.9 in (7.4 cm) wide.
- After Row 6: about 3.75 in (9.5 cm) wide.
- After the crown and body: about 3 in (7.6 cm) tall.
- After the hem: about 4.25 in (10.8 cm) tip to tip.
If your bell is more than 0.25 in (0.6 cm) too wide at Row 6, go down to a 2.25 mm hook. If it is more than 0.25 in (0.6 cm) too narrow, go up to a 2.75 mm hook. The crown should feel firm and should not let light through. If you can see gaps in it, use a smaller hook for the blue sections only.

Cream Body
Use Color A. The body is worked top-down in rows. Shell rows are WS rows and net rows are RS rows.
Foundation: Ch 14.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across. Turn. (13 sc)
Row 2 (WS, shell row): Ch 1, sc in first sc, skip 2 sc, shell in next sc, skip 2 sc, sc in next sc; repeat from * once more. Turn. (2 shells, 3 sc = 13 sts)*
Row 3 (RS, net row): Work an edge V in the first sc. Ch 2, sc in the center dc of the next shell, ch 2, V-st in the next sc; repeat from * once more. Turn. (3 V-sts, 2 sc)*
The ch-2 spaces on either side of each sc become the diamond holes.
Row 4 (WS, shell row): Ch 1, sc in the first dc. Shell in the ch-2 sp of the first V-st. Skip the ch-2 sp, sc in the next sc, skip the ch-2 sp, shell in the ch-2 sp of the next V-st; repeat from * once more. Sc in the 3rd ch of the edge-V turning chain. Turn. (3 shells, 4 sc = 19 sts)*
Row 5 (RS, net row): Work an edge V in the first sc. Ch 2, sc in the center dc of the next shell, ch 2, V-st in the next sc; repeat from * 2 more times. Turn. (4 V-sts, 3 sc)*
Row 6 (WS, shell row): Ch 1, sc in the first dc. Shell in the ch-2 sp of the first V-st. Skip the ch-2 sp, sc in the next sc, skip the ch-2 sp, shell in the ch-2 sp of the next V-st; repeat from * 2 more times. Sc in the 3rd ch of the turning chain. Turn. (4 shells, 5 sc = 25 sts)*
How the body widens: Each net row places one more V-st than the shell row below it had shells. That is why each shell row grows by exactly 6 sts: 13, then 19, then 25.
Row 7 (RS, leveling row): Ch 4 (counts as tr). Ch 2, sc in the center dc of the next shell, ch 2, tr in the next sc; repeat from * 3 more times. Fasten off Color A. (5 tr, 4 sc, 8 ch-2 sps)*
The tall tr stitches fill the dips between the shells and make the bottom edge straight.
Checkpoint: The cream body should measure about 3.75 in (9.5 cm) wide at the bottom and 2.25 in (5.7 cm) tall.
Blue Crown
Use Color B. With the RS facing, turn the body upside down so the free loops of the foundation chain are along the top.
Crown Row 1: Join Color B in the first free loop. Ch 1, sc in the same loop and in each free loop across. Turn. (13 sc)
Crown Row 2: Ch 1, sc in each sc across. Turn. (13 sc)
Crown Row 3: Ch 1, sc2tog, sc in the next 9 sts, sc2tog. Turn. (11 sc)
Crown Row 4: Ch 1, sc2tog, sc in the next 7 sts, sc2tog. Turn. (9 sc)
Crown Row 5: Ch 1, sc2tog, sc in the next 5 sts, sc2tog. Fasten off. (7 sc)
The decreases at both ends round the shoulders into a dome. The crown is about 0.75 in (1.9 cm) tall.
Hanging Loop
Join Color B in the 4th (center) sc of Crown Row 5. Ch 1, sc in the same st; this sc makes the small knob.
Ch 24, then sl st in the same center st to form the loop. Work 32 sc over the ch-24 loop, packing them tightly so the chain is fully covered. Sl st in the first sc of the knob and fasten off.
The finished loop stands about 1.5 in (3.8 cm) tall.
Blue Hem Border
Border gauge: The hem uses the same sc gauge as the crown, 28 sc = 4 in (10.2 cm), worked firmly. It is 2 rows deep, about 0.25 in (0.6 cm).
The border runs along the bottom edge only. The sides of the bell stay cream.
Hem Row 1 (WS): With the WS facing, join Color B in the top of the turning chain of Row 7. Ch 1. Sc in each tr and each sc, and work 2 sc in each ch-2 sp. Turn.
- Count check: 5 tr + 4 sc + (8 ch-2 sps × 2 sc) = 5 + 4 + 16 = 25 sc.
Hem Row 2 (RS, flare row): Ch 1, 3 sc in the first sc, sc in the next 23 sc, 3 sc in the last sc. Do not fasten off yet.
- Count check: 23 middle sc + 3 + 3 = 29 sc.
Why the math works: Row 7 has 25 working points. Two sc in each ch-2 sp keeps the stitch spacing equal to the solid tr-and-sc spacing, so the 25 sc lie flat at about 3.75 in (9.5 cm).
In Row 2, the 3-sc groups add 2 sts at each end, for 4 extra sts in total. The middle 23 sts stay one-to-one, so the hem stays straight while the tips flare out about 0.25 in (0.6 cm) on each side. That brings the width to 4.25 in (10.8 cm).
Edge finish: After the last 3-sc group, sl st into the side of Hem Row 1 so the corner tip stays sharp. Fasten off.
Clapper and Stem
Use Color B.
Round 1: Make a magic ring, ch 1, work 6 sc in the ring. Pull the ring closed and sl st to the first sc. (6 sc)
Round 2: Ch 1, 2 sc in each sc around. Sl st to the first sc. (12 sc)
Fasten off, leaving an 8 in (20.3 cm) tail. The clapper is about 0.75 in (1.9 cm) across.
Stem: Find the 15th (center) sc of Hem Row 2 and mark it. Join Color B there and ch 3. Sl st into any edge sc of the clapper, then fasten off.
Use the clapper’s long tail to tack the stem at both ends so the clapper hangs straight. With the stem, the clapper hangs about 1 in (2.5 cm) below the hem.
Weave in all ends inside stitches of the same color.
Final Blocking
- Spray the bell until it is evenly damp but not dripping.
- Lay it RS up on the blocking mat.
- Pin the hem straight, at 4.25 in (10.8 cm) from tip to tip.
- Pin the crown top so the bell is 3.25 in (8.3 cm) tall from crown to hem.
- Open each diamond hole with a pin or your fingertip, and pin the outer shells so the sides curve evenly.
- Pin the clapper round and lay the loop flat.
- Let it dry completely, which takes about 4 hours, before unpinning.
- For a stiffer ornament, brush on a light fabric stiffener, re-pin, and let it dry again.
Final Quality-Control Checklist
- Shell tiers count 2, 3, and 4 from top to bottom.
- Every shell has 5 dc, and every diamond hole is open.
- The crown has 13, 13, 11, 9, and 7 sc rows and feels solid.
- Hem Row 1 has 25 sc and Hem Row 2 has 29 sc.
- Both flare tips are the same size.
- The clapper is centered on the 15th sc of the hem.
- The loop is fully covered with sc.
- The bell measures 4.25 in (10.8 cm) wide and 3.25 in (8.3 cm) tall.
- All ends are woven in and none show.
Troubleshooting
- The bell curls or cups: Your shells are too tight. Go up 0.25 mm for the cream rows only.
- The sides look wavy: Check that each shell row starts and ends with sc, not a shell.
- The hem ruffles: Use 2 sc per ch-2 sp, not 3, and recount to 25.
- The hem pulls in: Your sc are too tight. Loosen your tension or go up a hook size for the blue rows.
- The crown is lopsided: Check that you made both sc2tog decreases in every decrease row.
- The clapper twists: Tack both ends of the stem with the yarn tail.
- The diamond holes look closed up: Re-block with damp pins pushed into each hole.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and dry flat with the bell pinned to shape. Store the ornament flat in tissue so the loop and flared tips keep their shape.

Final Notes
The measurements build on each other. Row 1 is 13 sc, about 1.9 in (4.8 cm) wide. The shell rows grow to 13, 19, and 25 sts, so the body is 3.75 in (9.5 cm) wide and 2.25 in (5.7 cm) tall. The crown adds 0.75 in (1.9 cm), so the bell is 3 in (7.6 cm) tall before the hem.
The 25-to-29 sc hem adds 0.25 in (0.6 cm), bringing the bell to 3.25 in (8.3 cm) tall and 4.25 in (10.8 cm) wide. With the loop and clapper, the ornament is 5.75 in (14.6 cm) tall. If you check each stage as you go, every bell in your set will match.
Happy crocheting!