Sage Sprig Letter L Keychain Crochet Pattern

The Sage Sprig Letter L Keychain is a small, textured initial charm. Stacked V-shaped leaf stitches run up the stem and turn sideways along the foot, so the letter looks like a sprig of herbs bent into an L. A cream rope-edge border frames the shape, and three tiny cream flowers with sunny yellow centers sit on top.

The palette is soft and natural: sage green for the body and leaves, cream for the border and petals, and a dot of golden yellow for each flower center. Gold hardware warms everything up, so it looks great clipped to a canvas tote, backpack, or set of keys.

This pattern uses US crochet terms. The finished keychain is 3.8 in (9.7 cm) wide and 4.0 in (10.2 cm) tall, not counting hardware or the leaves that stick out past the edge.

The letter is crocheted as one piece. You work the stem from the bottom up in rows, pick up stitches along the lower side edge, and work the foot outward to the right. A two-round border goes around everything, and then you sew on the flowers and leaves and add the keyring.

Finished Size and Construction

  • Finished size: 3.8 in (9.7 cm) wide x 4.0 in (10.2 cm) tall
  • Skill level: Advanced beginner / intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK (weight 3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 1 letter body, plus 3 flowers and 5 leaves as appliqués
  • Layout: Single L shape (stem plus foot)
  • Stem: 7 sts wide x 16 rows = 1.4 in (3.6 cm) x 3.2 in (8.1 cm)
  • Foot: 7 sts tall x 8 rows, extending 1.6 in (4.1 cm) from the stem
  • Size before border: 3.0 in (7.6 cm) wide x 3.2 in (8.1 cm) tall
  • Border depth: 0.4 in (1.0 cm) on every side

Materials

Choose a smooth, mercerized or combed DK cotton. Cotton shows off the leaf texture clearly, keeps its shape on a keychain, and stands up to handling. Avoid fuzzy or very stretchy yarns, because they blur the V’s.

  • Color A, sage green: 8 g / about 20 m (body and leaves)
  • Color B, cream: 5 g / about 12 m (border and petals)
  • Color C, golden yellow: 1 g / about 3 m (flower centers)

These quantities include a safety margin of about 20 percent.

Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– 1 in (2.5 cm) gold split keyring with a short chain (3–4 links)
– 8 mm gold jump ring
– 2 pairs of flat-nose pliers
– Scissors
– Stitch markers
– Pins and a foam blocking mat

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together
  • FPdc – front post double crochet
  • rev sc – reverse single crochet (crab stitch)
  • RS / WS – right side / wrong side
  • st(s) – stitch(es)

Special stitch: Leaf (LF). This is worked over 2 sts. Find the matching pair of sts 2 rows below, directly under your next 2 sts. Hold those 2 posts together as one. FPdc around both posts together, then skip the st behind it. Work a second FPdc around the same 2 posts, then skip the st behind it. The 2 new stitches come out of one base and spread into a V that opens in the direction you are working. Each Leaf replaces 2 sts, so your stitch count stays the same.

Gauge and Checkpoints

Gauge: 5 sts and 5 rows = 1 in (2.5 cm) in the leaf pattern, which means 10 sts x 10 rows = 2 in (5.1 cm).

The rows and stitches are the same size, which matters later because the border puts 1 sc in every row end.

Use the stem as your gauge test:

  • After stem Row 1: the width is 1.4 in (3.6 cm).
  • After stem Row 7: the piece is a 1.4 in (3.6 cm) square. This square becomes the corner block.
  • After stem Row 16: the stem is 3.2 in (8.1 cm) tall.
  • After foot Row 8: the full width is 3.0 in (7.6 cm).
  • After the border: the piece is 3.8 in (9.7 cm) x 4.0 in (10.2 cm).

If your piece is more than 0.1 in (0.3 cm) too big at any checkpoint, go down to a 3.25 mm hook. If it’s too small, go up to a 3.75 mm hook. If only the height is off, adjust how tightly you work the FPdc: tighten up if rows run tall, and draw the loops up a little higher if rows run short.

Close-up of crocheted white daisy charm with yellow center and green leaves attached to gold chain.

Stem

Use Color A. Turning ch 1 does not count as a stitch.

Foundation: Ch 8.

Row 1 (RS): Sc in 2nd ch from hook and in each ch across, turn. (7 sts)

Row 2 (WS): Ch 1, sc in each st across, turn. (7 sts)

Row 3 (RS, leaf row): Ch 1, sc in first st. Work LF around the posts of sts 2–3 of Row 1. Sc in next st. Work LF around the posts of sts 5–6 of Row 1. Sc in last st, turn. (7 sts: 3 sc + 2 LF)

Row 4 (WS): Ch 1, sc in each st across, including the top of each FPdc, turn. (7 sts)

Row 5 (RS, leaf row): Ch 1, sc in first st. Work LF around the 2 FPdc of the first Leaf in Row 3, held together. Sc in next st. Work LF around the 2 FPdc of the second Leaf in Row 3, held together. Sc in last st, turn. (7 sts)

Rows 6–16: Repeat Rows 4–5 five more times, then work Row 4 once more. Odd rows are leaf rows and even rows are plain sc. Do not fasten off; leave the loop on a stitch marker. (7 sts each row)

You now have 7 Leaves stacked in each of 2 columns (Rows 3, 5, 7, 9, 11, 13, and 15). They form two braided columns, with plain sc between them and at each edge.

Checkpoint: 1.4 in (3.6 cm) x 3.2 in (8.1 cm).

Foot

Fasten off Color A from the stem, leaving a 4 in (10.2 cm) tail.

Hold the stem with the RS facing you and Row 1 at the bottom. The foot is worked from the right-hand edge of Rows 1–7.

Row 1 (RS, pick-up): Join Color A at the end of stem Row 7 on the right edge. Ch 1, then work 1 sc into each row end down to Row 1, turn. (7 sts)

Row 2 (WS): Ch 1, sc in each st across, turn. (7 sts)

Row 3 (RS, leaf row): Ch 1, sc in first st. Work LF around sts 2–3 of foot Row 1. Sc in next st. Work LF around sts 5–6 of foot Row 1. Sc in last st, turn. (7 sts)

Row 4 (WS): Ch 1, sc in each st across, turn. (7 sts)

Rows 5–8: Repeat Rows 3–4, working each LF around the previous Leaf, twice. Fasten off. (7 sts each row)

The foot Leaves open toward the right, so the chevrons turn the corner just like a sprig.

Checkpoint: The foot extends 1.6 in (4.1 cm) from the stem, for a total width of 3.0 in (7.6 cm). The foot’s 7 sts should match the 7 stem rows it sits on, at 1.4 in (3.6 cm) tall. Weave in the green tails on the WS.

Border

Border gauge: Use the same 3.5 mm hook. Work 1 sc in every stitch and 1 sc in every row end. Each round adds about 0.2 in (0.5 cm).

Why the math works: The leaf pattern has 5 sts and 5 rows per inch, so 1 sc per row end matches 1 sc per stitch exactly. The edges stay flat without ruffling or cupping. The ch-2 corners give the 5 outer points room to turn, and the sc2tog at the inner corner takes up the extra fullness.

Rnd 1 (RS): Join Color B in the first foundation loop at the bottom left of the stem. Work each side in order:

  • Bottom edge: 1 sc in each of the 7 foundation loops, then 1 sc in each of the 8 foot row ends. (15 sc) Ch 2 for the corner.
  • Foot end: 1 sc in each of the 7 sts of foot Row 8. (7 sc) Ch 2.
  • Inner edge: 1 sc in each of the foot row ends for Rows 8 through 2 (7 sc). Sc2tog across the foot Row 1 row end and the stem Row 8 row end (1 st). Then 1 sc in each stem row end for Rows 9–16 (8 sc). (16 sts) Ch 2.
  • Stem top: 1 sc in each of the 7 sts of Row 16. (7 sc) Ch 2.
  • Left side: 1 sc in each stem row end for Rows 16 down to 1. (16 sc) Ch 2.
  • Join with a sl st to the first sc.

Total: 15 + 7 + 16 + 7 + 16 = 61 sts, plus 5 ch-2 corner spaces.

Rnd 2 (rope edge): Ch 1. Working left to right (right to left if you are left-handed), work rev sc in each sc and 3 rev sc in each ch-2 space. Skip the sc2tog at the inner corner so the inside angle stays crisp. Join with a sl st and fasten off.

Count per side:
– Bottom: 15
– Foot end: 7
– Inner edge: 15 (16 minus the skipped sc2tog)
– Stem top: 7
– Left side: 16
– Corners: 5 x 3 = 15

Total: 75 rev sc.

Checkpoint: 3.8 in (9.7 cm) x 4.0 in (10.2 cm).

Flowers (make 3)

Center: With Color C, make a magic ring. Ch 1, then work 5 sc in the ring. Pull the ring closed and join with a sl st to the first sc. Fasten off. (5 sts)

Petals: Join Color B in any sc. In each sc around, work (ch 2, 2 dc, ch 2, sl st), for a total of 5 petals. Fasten off, leaving a 6 in (15.2 cm) tail for sewing. Each flower measures about 0.8 in (2.0 cm) across.

Leaves (make 5)

With Color A, ch 6.

Side 1: Starting in the 2nd ch from the hook, work sl st, sc, hdc, sc, sl st. (5 sts)

Tip: Ch 1, then rotate the piece to work along the opposite side of the foundation chain.

Side 2: Work sl st, sc, hdc, sc, sl st. (5 sts)

Join with a sl st to the first sl st. Fasten off, leaving a 6 in (15.2 cm) tail. Each leaf is about 0.9 in (2.3 cm) long.

Assembly

Pin the appliqués in place before you sew anything.

  1. Flower 1: Place it on the upper left of the stem, overlapping the border at about stem Row 13. Tuck 2 leaves underneath so they point out past the left edge.
  2. Flower 2: Center it in the inner corner, covering the sc2tog. Put 1 leaf under its right side, pointing along the top of the foot.
  3. Flower 3: Place it at the bottom-right tip of the foot. Tuck 2 leaves under it, pointing right and down past the border.

Sew each leaf down along its center line, then stitch each flower through its center and between the petals. Keep all stitches on the WS of the letter, and weave in the ends.

Open the jump ring with two pliers by twisting it sideways, never by pulling it apart. Thread it through both loops of the 4th rev sc of the stem top (the center stitch of the 7). Hook on the keyring chain, then close the jump ring fully.

Final Blocking

  1. Before you add the keyring, lightly mist the piece with water.
  2. Lay it RS up on the blocking mat.
  3. Pin the outer corners so the piece measures 3.8 in (9.7 cm) wide x 4.0 in (10.2 cm) tall.
  4. Pin the inner corner so the inside angle is square.
  5. Push the Leaf columns straight with your fingertip.
  6. Leave it to dry completely, then lift the petals gently with a fingertip.

Avoid steam: it flattens the leaf texture.

Final Quality-Control Checklist

  • Stem is 7 sts wide with 7 Leaves in each column.
  • Foot has 3 Leaves per column, and they open to the right.
  • Rnd 1 has 61 sts and 5 ch-2 corners.
  • Rnd 2 has 75 rev sc.
  • Size is 3.8 in (9.7 cm) x 4.0 in (10.2 cm).
  • Inner corner is square and doesn’t pucker.
  • Flowers and leaves are firmly sewn, with no loose petals.
  • Jump ring is fully closed and anchored in the stem top’s center stitch.
  • All ends are woven in on the WS.

Troubleshooting

Leaves look like straight lines, not V’s. Make sure both FPdc go around the same pair of posts. Working them around separate posts makes parallel ribs instead.

The stem curls. Your FPdc are too tight. Draw up the yarn-over loops to the height of the sc row.

The foot edge waves. You picked up more than 7 sts. Work exactly 1 sc per row end.

Border ruffles. Go down a hook size for the border only, or check that you haven’t added extra stitches at the row ends.

Inner corner bulges. Don’t skip the sc2tog in Rnd 1, and skip it in Rnd 2.

Rev sc looks messy. Keep the loops relaxed and insert the hook from front to back each time.

Care

Hand wash in cool water with mild soap, press the water out in a towel, and lay flat to dry. Take off the keyring first so the metal doesn’t tarnish or snag the yarn.

Cream canvas tote bag with L-shaped crochet charm of white daisies and green leaves, hanging from weathered wooden fence in garden.

Final Notes

Here’s how the measurements build. The 7-st stem at 5 sts per inch is 1.4 in (3.6 cm) wide, and its 16 rows are 3.2 in (8.1 cm) tall. The 8-row foot adds 1.6 in (4.1 cm), so the piece before the border is 3.0 in (7.6 cm) wide. Two border rounds add 0.4 in (1.0 cm) on each side, which brings the finished keychain to 3.8 in (9.7 cm) x 4.0 in (10.2 cm). Check each stage as you go and the final piece will land on size.

Happy crocheting!

Leave a Comment