This little gingerbread man looks like a cookie fresh from the tray. He has a round head, short chubby arms, an open lattice tummy and sturdy legs. Cream shells on his hands and feet look like piped icing, and a cranberry bow sits at his neck.
The colors are classic holiday: caramel brown for the cookie, cream for the icing, and deep red for the bow. The lattice keeps him light enough to hang on a thin branch.
The pattern uses US crochet terms. The finished ornament is about 5.5 in (14.0 cm) wide and 5.75 in (14.6 cm) tall, not counting the hanging loop.
Construction is simple. You make the head in the round, then work the body in rows downward from the head’s lower edge. The arms come from foundation chains, the torso is mesh, and the legs are short solid rows. One brown edging round neatens the outline. Then you add cream scallops, a hanging loop and a tied bow.
Finished Size and Construction
- Finished size: 5.5 in (14.0 cm) wide × 5.75 in (14.6 cm) tall
- Hanging loop: about 1.5 in (3.8 cm) tall
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: Sport (#2), cotton or cotton blend
- Hook: 3.25 mm (US D-3)
- Number of pieces: 1 ornament body plus 1 small bow
- Layout: single standalone figure
- Size before edging: 4.5 in (11.4 cm) wide × 5 in (12.7 cm) tall
- Edging depth: brown round 0.25 in (0.6 cm); cream scallops add 0.25 in (0.6 cm) at the hands and feet
Materials
Use a smooth, mercerized sport-weight cotton. It shows the lattice clearly and blocks flat. Avoid fuzzy yarns, because they fill in the diamond openings.
- Brown (caramel): 12 g, about 37 m
- Cream: 3 g, about 9 m
- Red (cranberry): 3 g, about 9 m
These quantities include a margin for a gauge swatch and weaving in ends.
Tools:
– 3.25 mm (US D-3) hook
– Tapestry needle
– 4 stitch markers
– Scissors
– Pins and a blocking mat
– Spray bottle
– Ruler or tape measure
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- st(s) – stitch(es)
- sp – space
- RS / WS – right side / wrong side
Special stitch – Icing shell: 3 hdc worked into the same stitch.
Gauge and Checkpoints
Gauge: 23 dc and 12 rows = 4 in (10.2 cm) in dc rows.
The ornament is small, so make the head first and use it as your test. Measure at each checkpoint:
- After head Rnd 1: 0.75 in (1.9 cm) across
- After head Rnd 2: 1.25 in (3.2 cm) across
- After head Rnd 3: 1.75 in (4.4 cm) across
- After body Row 3: 4.5 in (11.4 cm) from hand to hand; 2.75 in (7.0 cm) from the top of the head
- After Row 7: hips about 3.75 in (9.5 cm) wide; total height 4.25 in (10.8 cm)
- After Row 9: total height 5 in (12.7 cm)
Too big? Go down to a 2.75 mm (US C-2) hook. Too small? Go up to a 3.5 mm (US E-4) hook. Stitch counts never change, so only the hook changes the size.

Head
Use brown.
Rnd 1: Make a magic ring. Ch 3 (counts as dc), then work 11 dc in the ring. Pull the ring closed and sl st to the top of ch-3. (12 dc)
Rnd 2: Ch 3 (counts as dc). Dc in the same st, then 2 dc in each st around. Sl st to the top of ch-3. (24 dc)
Rnd 3: Ch 1. Sc in next st, 2 sc in next st; repeat from * around. Sl st to the first sc. (36 sc)
Fasten off and weave in the center tail.
Lay the head flat with the join at the top. Count the 10 sts centered at the bottom and mark the first and last of them. These 10 sts become the neck. The other 26 sts stay free for the edging.
Body
Use brown. You work the body in rows, starting from the head.
Row 1 (RS): Make a slip knot on the hook and ch 8 (left arm chain). Holding the head above the chain, dc in each of the 10 marked neck sts. Then ch 10 (right arm chain). Turn. (10 dc + 18 ch)
Row 2: Dc in the 4th ch from the hook. The 3 skipped ch count as a dc. Dc in the next 6 ch (8 sts for the arm). Dc in each of the 10 neck dc. Then dc in each of the 8 ch of the starting chain. Turn. (26 dc: 8 + 10 + 8)
Row 3 (eyelet row):
– First arm: Ch 3 (counts as dc), dc in next st, ch 1, sk 1, dc in next 2, ch 1, sk 1, dc in next 2. (8 sts)
– Torso: Dc in next 10. (18 sts)
– Second arm: Dc in next 2, ch 1, sk 1, dc in next 2, ch 1, sk 1, dc in next 2. The last dc goes into the top of the turning ch. (26 sts)
Turn. (26 sts: 22 dc + 4 ch-1 sps)
This gives each arm two eyelets.
Row 4 (lattice begins): Sl st in each of the first 8 sts, counting ch-1 sps as sts. Ch 1, then sc in the next st (the first torso st). Ch 4, sk 2, sc in next st; repeat from * 2 more times. The sc stitches land on torso sts 1, 4, 7 and 10. Leave the last 8 arm sts unworked. Turn. (4 sc, 3 ch-4 loops)
Row 5 (growth row): Ch 1, sc in the first sc, ch 4. Sc in the next loop, ch 4; repeat from * 2 more times. Sc in the last sc. Turn. (5 sc, 4 loops)
Row 6 (growth row): Ch 1, sc in the first sc, ch 4. Sc in the next loop, ch 4; repeat from * 3 more times. Sc in the last sc. Turn. (6 sc, 5 loops)
Each sc sits in the middle of a loop from the row below, so you get the diamond lattice. The extra edge loop on Rows 5 and 6 makes the torso flare toward the hips.
Row 7 (conversion row, hips): Ch 3 (counts as dc in the first sc). Work 3 dc in the next loop. Dc in the next sc, 3 dc in the next loop; repeat from * 3 more times. Dc in the last sc. Turn.
(21 dc = 6 worked 1-per-sc + 15 added into the 5 loops)
Checkpoint: The hips measure about 3.75 in (9.5 cm) wide, and the total height is 4.25 in (10.8 cm).
First leg:
Row 8: Ch 3 (counts as dc), dc in the next 8 sts. Leave the rest unworked. Turn. (9 dc)
Row 9: Ch 3, dc in the next 8 sts. (9 dc) Fasten off.
Second leg:
Row 8: Count from the end of Row 7, where the first leg sits. Skip the next 3 sts (the crotch). Join brown with a sl st in the 13th st. Ch 3, dc in the next 8 sts (sts 13–21). Turn. (9 dc)
Row 9: Ch 3, dc in the next 8 sts. (9 dc) Fasten off.
Leg check: 9 + 3 skipped + 9 = 21, which matches Row 7.
Checkpoint: The total height is 5 in (12.7 cm) and the width across the hands is 4.5 in (11.4 cm).
Edging and Icing Trim
Edging gauge: about 6 sc per 1 in (2.5 cm) along a straight edge. The edging adds 0.25 in (0.6 cm) on every side.
Brown Edging Round
Join brown with a sl st in the first free head st next to one shoulder. Ch 1, then sc around the whole figure using these counts:
| Section | Stitches | Running total |
|---|---|---|
| Head (1 sc in each free sc) | 26 | 26 |
| Arm top (1 sc per arm st along the foundation chain) | 8 | 34 |
| Arm end (2 sc in corner + 3 sc across the 2 row ends + 2 sc in corner) | 7 | 41 |
| Underarm (1 sc in each Row 3 st; on the side with Row 4’s sl sts, work into those sl sts) | 8 | 49 |
| Torso side (2 sc per mesh row end for Rows 4–6, 2 sc across Row 7’s end) | 8 | 57 |
| Outer leg (2 sc per row end) | 4 | 61 |
| Foot bottom (2 sc in first st, sc in next 7, 2 sc in last st) | 11 | 72 |
| Inner leg | 4 | 76 |
| Crotch (1 sc in each skipped Row 7 st) | 3 | 79 |
| Second leg (inner 4, foot 11, outer 4) | 19 | 98 |
| Torso side | 8 | 106 |
| Underarm | 8 | 114 |
| Arm end | 7 | 121 |
| Arm top | 8 | 129 |
Sl st to the first sc. (129 sc) Fasten off.
Mark the 7 sc at each arm end and the 11 sc at each foot bottom.
Why the math works: Every edge gets either one sc per stitch or two sc per row end, which matches the dc and mesh row heights. The only extra stitches are the corner increases: two on each foot, and the doubled corner sc on each arm end. These turn the corners without cupping, and they are already counted in the 7 and 11 above, so nothing is added twice.
Cream Icing Shells
Each hand (over the 7 arm-end sc): Join cream with a sl st in the first marked sc. Work an icing shell in the next sc, sl st in the next sc; repeat from * 2 more times. (3 shells, 7 sts used) Fasten off.
Each foot (over the 11 foot sc): Join cream with a sl st in the first marked sc. Work an icing shell in the next sc, sl st in the next sc; repeat from * 4 more times. (5 shells, 11 sts used) Fasten off.
Each section has an odd count (2n + 1), so it starts and ends with a sl st and holds exactly n shells: 3 per hand and 5 per foot.
Hanging Loop
Join brown with a sl st in the 13th head edging sc, at the top center. Ch 20, then sl st in the same st. Sl st in each of the 20 ch around the loop, then sl st in the base. Fasten off. The loop stands about 1.5 in (3.8 cm) tall.
Red Bow
With red, ch 46. Sl st in the 2nd ch from the hook and in each ch across. (45 sl st) This makes a cord about 6.5 in (16.5 cm) long.
Tie it in a bow with two loops and two tails, about 1.5 in (3.8 cm) wide. Trim the tails to 0.5 in (1.3 cm) and knot the ends. Sew the bow over the neck so it covers the Row 1 join.
Final Blocking
- Weave in all ends along the brown edging. Keep them out of the lattice openings.
- Mist the ornament until it is damp but not dripping.
- Lay it face up on the blocking mat.
- Pin the head into a circle 2 in (5.1 cm) across, including the edging.
- Pin the hands so the figure is 5.5 in (14.0 cm) wide.
- Pin the feet so the figure is 5.75 in (14.6 cm) tall.
- Open each lattice diamond with a pin so the loops sit evenly.
- Shape each cream shell into a rounded bump with your fingertip.
- Let it dry completely, then unpin.
- Fluff the bow loops last.
Final Quality-Control Checklist
- The head is flat, round and 2 in (5.1 cm) across.
- Each arm has two clear eyelets.
- The torso has 3 rows of diamond mesh that widen toward the hips.
- Row 7 counts 21 dc, and each leg counts 9 dc.
- The edging is 129 sc with no puckers at the corners.
- There are 3 cream shells per hand and 5 per foot.
- The bow is centered and covers the neck join.
- The hanging loop is centered so the ornament hangs straight.
- The final size is 5.5 in × 5.75 in (14.0 cm × 14.6 cm).
Troubleshooting
The head cups. Your Rnd 2 tension is too tight. Re-work it with a looser yo, or go up half a hook size for the head only.
The head ruffles. You probably made extra increases in Rnd 3. Recount to 36.
The arms curl upward. Underarm stitches pulled tight in the edging. Work them a little looser and block flat.
The lattice collapses. The ch-4 loops are too tight. Make the chains a little longer, or use ch 5 and block firmly.
The legs are uneven. Check that you skipped exactly 3 sts at the crotch, so each leg starts with 9.
The cream shells look flat. Use a slightly larger hook for the trim, or work 4 hdc per shell.
The ornament hangs crooked. Move the loop to the true top-center stitch.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and dry flat, reshaping the lattice. Store flat so the shells and bow keep their shape.

Final Notes
The size checks build on each other:
- The head measures 1.75 in (4.4 cm) after Rnd 3.
- Row 3 sets the 4.5 in (11.4 cm) span from hand to hand.
- Rows 4–7 bring the hips to 3.75 in (9.5 cm) and the height to 4.25 in (10.8 cm).
- The legs finish the body at 5 in (12.7 cm) tall.
- The 129-stitch edging and cream icing bring the finished size to 5.5 in (14.0 cm) wide by 5.75 in (14.6 cm) tall.
If each checkpoint matches, the next one will too. Make a batch for the tree, tie one onto a gift, or hang one in a window.
Happy crocheting!