Vineyard Grape Bag Holder Crochet Pattern

This plastic bag holder hangs neatly on a door knob or hook and keeps grocery bags out of sight. Its body is an open diamond lattice, and every diamond holds a small raised bunch of popcorn-stitch grapes. A solid collar at the top lets you stuff bags in. A drawstring at the bottom lets you pull them out one at a time.

The sample is worked in a deep berry cotton that looks like ripe wine grapes. A soft yellow version works just as well for a sunny kitchen. The style is part vintage pantry and part modern macramé.

The pattern uses US crochet terms. The finished holder measures 12.3 in (31.2 cm) tall and 6 in (15.2 cm) wide laid flat across the body, before the bottom is cinched.

The holder is one seamless tube worked from the bottom up in continuous spirals: a solid bottom band with drawstring eyelets, an increase round, a 25-round lattice body, a decrease round and a solid top band. You then sew on a strap and thread a drawstring through the eyelets.

Finished Size and Construction

  • Finished size: 12.3 in (31.2 cm) tall × 6 in (15.2 cm) wide flat at the body
  • Skill level: Intermediate
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.5 mm (US 7)
  • Number of pieces: 1 body tube, plus 1 strap, 1 drawstring and 2 tiny balls
  • Layout: Single tube, worked bottom to top
  • Band width: 5 in (12.7 cm) flat, 40 stitches around
  • Body width: 6 in (15.2 cm) flat, 48 units around
  • Size before top band: 10.5 in (26.7 cm) tall
  • Top band (border) depth: 1.8 in (4.6 cm)

Materials

Use a smooth, firm worsted-weight cotton or cotton blend. Cotton holds the popcorns crisply and won’t stretch out under a full load of bags. Avoid fuzzy or very soft acrylics, because they blur the lattice lines.

  • Berry (main color): 140 g / 250 m
  • Optional colorway: Sunny Yellow, 140 g / 250 m (if you’re making the yellow version instead)

Quantities include a margin of about 15 percent for swatching and the strap.

Tools:
– 4.5 mm (US 7) crochet hook
– 1 locking stitch marker
– Tapestry needle
– Scissors
– Measuring tape
– Rust-proof pins and a rolled towel for blocking

Abbreviations (US Terms)

  • ch – chain
  • sc – single crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together
  • sk – skip
  • sl st – slip stitch
  • st(s) – stitch(es)
  • rnd(s) – round(s)
  • pc – popcorn (see below)
  • unit – one stitch or one chain in a round

Popcorn (pc): Work 4 dc in the same unit. Remove the hook from the loop. Insert the hook from front to back into the top of the first dc, pick up the dropped loop and pull it through. A pc counts as 1 unit. Worked from the right side, it pops toward you like a grape.

“Ch X, sk X”: Chain the given number and skip the same number of units below. Every ch counts as 1 unit.

Gauge and Checkpoints

  • Solid sc: 16 sc and 18 rnds = 4 in (10.2 cm)
  • Lattice pattern: 8 units = 2 in (5.1 cm) wide, and one 8-rnd repeat = 3 in (7.6 cm) tall

Treat the bottom band as your test piece. After Rnd 5, lay it flat. It should measure 5 in (12.7 cm) across.

Checkpoints:
– After Rnd 6: bottom band 1.3 in (3.3 cm) tall
– After Rnd 14: total height 4.3 in (10.9 cm), body 6 in (15.2 cm) flat
– After Rnd 31: total height 10.5 in (26.7 cm)
– After Rnd 39: total height 12.3 in (31.2 cm)

If the piece is too big, go down 0.5 mm in hook size. If it’s too small, go up 0.5 mm. If only the lattice is off, change the hook for Rnds 7–31 alone.

Detailed close-up of deep magenta crochet stitches with textured yarn knots arranged in a lattice pattern.

Bottom Band

Work in continuous spirals and don’t join rounds. Place the marker in the first stitch of each round and move it up as you go.

Foundation: Ch 40. Sl st into the first ch to form a ring, taking care not to twist it.

Rnd 1: Ch 1 (does not count), sc in each ch around. (40 sc)

Rnd 2 (eyelets): Sc in next 3 sts, ch 1, sk 1; repeat from * 9 more times. (30 sc + 10 ch-1 = 40 units, 10 eyelets)

Rnd 3: Sc in each sc and in each ch around. (40 sc)

Rnds 4–5: Sc in each st around. (40 sc)

Rnd 6 (increase): Sc in next 4 sts, 2 sc in next st; repeat from * 7 more times. (40 + 8 = 48 sc)

The band should now be 1.3 in (3.3 cm) tall.

Lattice Body

Each round has 48 units, which is 6 repeats of 8 units. Sc and pc are worked into the unit directly below, whether that is a stitch or a chain. Each chain skips one unit below.

The sc columns shift one unit per round to form crossing diagonal lines. The popcorns stack 1, then 2, then 3 inside every diamond, so each bunch points down.

Rnd 7 (P1): Ch 2, sk 2, sc in next, ch 3, sk 3, sc in next, ch 1, sk 1; repeat from * 5 more times. (12 sc, 36 ch = 48 units)

Rnd 8 (P2): Pc in next, ch 2, sk 2, sc in next, ch 1, sk 1, sc in next, ch 2, sk 2; repeat from * 5 more times. (12 sc, 6 pc, 30 ch = 48 units)

Rnd 9 (P3): Ch 1, sk 1, pc in next, ch 2, sk 2, sc in next, ch 2, sk 2, pc in next; repeat from * 5 more times. (6 sc, 12 pc, 30 ch = 48 units)

Rnd 10 (P4): Pc in next, ch 1, sk 1, pc in next, sc in next, ch 1, sk 1, sc in next, pc in next, ch 1, sk 1; repeat from * 5 more times. (12 sc, 18 pc, 18 ch = 48 units)

This completes the first tier of grape bunches.

Rnd 11 (P5): Repeat Rnd 7. (12 sc, 36 ch = 48 units)

Rnd 12 (P6): Ch 1, sk 1, sc in next, ch 2, sk 2, pc in next, ch 2, sk 2, sc in next; repeat from * 5 more times. (12 sc, 6 pc, 30 ch = 48 units)

Rnd 13 (P7): Sc in next, ch 2, sk 2, pc in next, ch 1, sk 1, pc in next, ch 2, sk 2; repeat from * 5 more times. (6 sc, 12 pc, 30 ch = 48 units)

Rnd 14 (P8): Ch 1, sk 1, sc in next, pc in next, ch 1, sk 1, pc in next, ch 1, sk 1, pc in next, sc in next; repeat from * 5 more times. (12 sc, 18 pc, 18 ch = 48 units)

This completes the second tier, set halfway between the first tier’s bunches.

Rnds 15–30: Repeat Rnds 7–14 twice more. That gives 3 full repeats, 6 tiers and 36 grape bunches in total.

Rnd 31: Repeat Rnd 7 once more. This closes the top row of diamonds. (12 sc, 36 ch = 48 units)

The work should now measure 10.5 in (26.7 cm) tall. Each repeat uses 72 popcorns (6 bunches × 2 tiers × 6 popcorns), so the body holds 216 popcorns in total.

Top Band (Border)

Border gauge: 16 sc = 4 in (10.2 cm). The 40 stitches give a 10 in (25.4 cm) circumference, or 5 in (12.7 cm) flat.

Rnd 32 (decrease): Work into every unit, stitch or chain. Sc in next 4 units, sc2tog over next 2 units; repeat from * 7 more times. That is 40 stitches worked from 48 units, using 8 sc2tog. When laid flat, each side has 20 stitches.

Rnds 33–39: Sc in each st around. (40 sc, 20 per flat side)

After Rnd 39, sl st in the next st to smooth the step, then fasten off. Weave in all ends.

Why the math works: Each sc2tog uses 2 units and makes 1 stitch, so 48 − 8 = 40. The top band then matches the bottom band’s 40 stitches, so both ends are 5 in (12.7 cm) flat while the body stays wider at 6 in (15.2 cm). The 8 rounds at 18 rnds = 4 in add 1.8 in (4.6 cm), which brings the total to 10.5 + 1.8 = 12.3 in (31.2 cm).

Strap

Row 1: Ch 46, sc in 2nd ch from hook and in each ch across. (45 sc)

Row 2: Ch 1, turn, sc in each st across. (45 sc)

Fasten off and leave a long tail. The strap measures 11.25 in (28.6 cm) long and 0.5 in (1.3 cm) wide.

Sew one end 0.75 in (1.9 cm) down inside the top band, centered over st 1 of Rnd 39. Sew the other end the same way over st 21, which is directly opposite because 40 ÷ 2 = 20 stitches apart. The free loop is 9.75 in (24.8 cm) long.

Drawstring and Ball Tips

Cord: Ch 80, then sl st in the back bump of each ch back to the start. (79 sl sts) The cord measures about 17 in (43.2 cm).

Balls (make 2): Make a magic ring and work 6 sc into it. Rnd 2: sc in each st around (6 sc). Fasten off, stuff the ball with the yarn tails, and cinch it closed. Each ball is 0.5 in (1.3 cm) across.

Sew one ball to each end of the cord. Weave the cord in and out through the 10 eyelets of Rnd 2 so that both ends come out of the same gap. Pull it in to make a 1.5 in (3.8 cm) opening and tie a bow.

Final Blocking

  1. Wet the holder in cool water and gently squeeze out the excess.
  2. Roll it in a towel and press to remove more water.
  3. Slide a rolled towel inside the tube, shaped wider through the body.
  4. Ease the diagonal lines straight and push each popcorn outward with a fingertip.
  5. Pin the top band so it is 5 in (12.7 cm) flat and the body 6 in (15.2 cm) flat.
  6. Let it dry completely, then thread the drawstring.

Final Quality-Control Checklist

  • [ ] Both bands have 40 stitches and measure 5 in (12.7 cm) flat
  • [ ] Every lattice round has 48 units
  • [ ] Each diamond holds a 3-2-1 bunch pointing down
  • [ ] The diagonal lines run unbroken from bottom to top
  • [ ] There are 36 complete grape bunches
  • [ ] The strap ends are sewn exactly opposite each other
  • [ ] The drawstring passes through all 10 eyelets
  • [ ] The total height is 12.3 in (31.2 cm)

Troubleshooting

Popcorns sink to the back: You are working from the wrong side. Keep the outside of the tube facing you.

Lines zigzag or break: A unit was missed. Count 8 units per repeat and recount at the marker.

Lattice looks too loose: Tighten your chains, or go down 0.5 mm in hook size for the body only.

Top band ruffles: The decrease round was skipped or uneven. Rework Rnd 32 with exactly 8 sc2tog.

Bags fall out: Pull the drawstring tighter so the opening is no more than 1.5 in (3.8 cm).

Care

Hand wash in cool water and lay flat to dry, reshaping over a rolled towel. Cotton can be machine washed on gentle in a mesh bag.

Two crocheted plant hangers in burgundy and yellow with diamond patterns hang from brass hooks on a cream wall.

Final Notes

The measurement chain is simple: 40 band stitches give 5 in (12.7 cm) flat, 48 lattice units give 6 in (15.2 cm), and 40 stitches again bring the top back to 5 in (12.7 cm). By height, that is 1.3 in (3.3 cm) for the bottom band, 9.2 in (23.4 cm) for the body and 1.8 in (4.6 cm) for the top band, which adds up to 12.3 in (31.2 cm). Check your gauge early and count your units every round, and the grapes will line up.

Happy crocheting!

Leave a Comment