This lacy bag holder turns a pile of plastic grocery bags into something nice to look at. Columns of fan shells climb a slim tube, separated by narrow V-stitch spines. The fans stay open enough to show the bags inside but are close enough to hold them. You push bags in at the top and pull them out through a gathered drawstring at the bottom.
The sample is in bright royal blue cotton, and a soft peach version is shown as an alternate colorway. Any smooth, solid color works, because the fans and spines are easiest to see without variegation. The look is cottage-kitchen pretty but practical enough to use every day.
The pattern uses US crochet terms. The finished holder is about 6.9 in (17.5 cm) wide when flattened and 14.75 in (37.5 cm) long, plus a hanging loop about 5 in (12.7 cm) tall, for an overall hanging length of about 19.75 in (50.2 cm).
You work the holder bottom-up in joined rounds, all in one piece. A chain ring and one single crochet round form the base. Three growing fan rounds shape the taper. A simple two-round repeat builds the body. A solid band and a strap finish the top. Last, you thread a chain cord through the base and tie it in a bow.
Finished Size and Construction
- Finished size (flat): 6.9 in (17.5 cm) wide × 14.75 in (37.5 cm) long, plus a 5 in (12.7 cm) loop
- Circumference at top band: 13.7 in (34.8 cm)
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: Worsted / medium (#4) cotton
- Hook: 4.5 mm (US 7)
- Number of pieces: 1 body (with the strap worked on), plus 1 drawstring cord
- Layout: Seamless tube worked in joined rounds, 6 fan repeats around
- Repeat size: One fan repeat is 2.25 in (5.7 cm) wide and 1.5 in (3.8 cm) tall
- Size before top band: 13 in (33.0 cm) long after Round 19
- Top band depth: 1.25 in (3.2 cm), 5 rounds of single crochet
Materials
Yarn: Use a smooth, mercerized or combed worsted-weight cotton. Cotton holds the fan shapes well, doesn’t stretch much under the weight of the bags, and washes well. Avoid fuzzy or very soft acrylics, because they blur the lace and sag over time.
- Royal blue (main color): 120 g / 200 m (219 yd)
- Alternate colorway, soft peach: the same amount, 120 g / 200 m (219 yd), if you are making a second holder
These amounts include a margin of about 15% for your gauge swatch, the drawstring, and small differences in tension.
Tools:
– 4.5 mm (US 7) crochet hook
– Locking stitch marker
– Tapestry needle
– Scissors
– Measuring tape
– Rust-proof pins and a blocking surface
– Spray bottle with water
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sk – skip
- sp – space
- st(s) – stitch(es)
- rep – repeat
- RS – right side
Special stitches:
– V-st (V-stitch): (dc, ch 1, dc) in the same stitch or space.
– Starting V-st: ch 4 (counts as dc + ch 1), dc in the same stitch or space.
– Fan: the stated number of dc all worked into a single sc.
Gauge and Checkpoints
Single crochet gauge: 14 sc and 16 rounds = 4 in (10.2 cm).
Lace gauge: One repeat (V-st plus a 9-dc fan) is 2.25 in (5.7 cm) wide across the top of the fan. One pair of Rounds 8–9 is 1.5 in (3.8 cm) tall.
Test one piece first: Use Rounds 1–7 as your gauge swatch. They make a small cup, and if the gauge is right you just keep going.
Checkpoints:
– After Round 1: the ring measures 6.9 in (17.5 cm) around, or 3.4 in (8.6 cm) flat.
– After Round 7: the piece is 4 in (10.2 cm) tall and measures 13.5 in (34.3 cm) around the fan tops.
– After Round 19: the piece is 13 in (33.0 cm) tall.
– After Round 25: the piece is 14.75 in (37.5 cm) tall and measures 13.7 in (34.8 cm) around the band.
If your piece is too big: go down to a 4 mm (US G-6) hook.
If your piece is too small: go up to a 5 mm (US H-8) hook.
Being 0.25 in (0.6 cm) off around the circumference is fine. If you are off by more than 1 in (2.5 cm), change hooks before you continue.

Base
Ch 24, then sl st to the first ch to form a ring, taking care not to twist the chain.
Round 1 (RS): Ch 1, sc in each ch around, then sl st to the first sc to join. (24 sc)
Place a marker in the joining stitch and move it up each round.
Round 2 (V-st and sc round): Make a starting V-st in the same st. Ch 2, sk 1 st, sc in the next st, ch 2, sk 1 st. V-st in the next st, ch 2, sk 1 st, sc in the next st, ch 2, sk 1 st. Rep from * 4 more times. Join with a sl st to the 3rd ch of the starting ch-4.
(6 V-sts, 6 sc, 12 ch-2 sps)*
Each repeat uses exactly 4 stitches of Round 1, and 6 × 4 = 24. Later, the drawstring runs through the 12 ch-2 spaces of this round.
Tapered Fan Rounds
Round 3 (first fan round): Sl st into the first V-st ch-1 sp and make a starting V-st there. Sk the ch-2 sp, work 5 dc in the next sc, and sk the next ch-2 sp. V-st in the next V-st sp, sk the ch-2 sp, 5 dc in the next sc, sk the ch-2 sp. Rep from * 4 more times, then join.
(6 V-sts, 6 fans of 5 dc; 42 dc total)*
Round 4 (V-st and sc round): Sl st into the V-st sp and make a starting V-st there. Ch 2, sc in the 3rd (center) dc of the fan, ch 2. V-st in the next V-st sp, ch 2, sc in the center dc of the fan, ch 2. Rep from * around, then join.
(6 V-sts, 6 sc, 12 ch-2 sps)*
Round 5: Sl st into the V-st sp and make a starting V-st there. Work 7 dc in the next sc. V-st in the next V-st sp, 7 dc in the next sc. Rep from * around, then join.
(6 V-sts, 6 fans of 7 dc; 54 dc total)*
Round 6: Sl st into the V-st sp and make a starting V-st there. Ch 3, sc in the 4th (center) dc of the fan, ch 3. V-st in the next V-st sp, ch 3, sc in the center dc of the fan, ch 3. Rep from * around, then join.
(6 V-sts, 6 sc, 12 ch-3 sps)*
Round 7: Sl st into the V-st sp and make a starting V-st there. Work 9 dc in the next sc. V-st in the next V-st sp, 9 dc in the next sc. Rep from * around, then join.
(6 V-sts, 6 fans of 9 dc; 66 dc total)*
The fans grow from 5 to 7 to 9 dc, which gives the bottom its rounded taper. Checkpoint: the piece is 4 in (10.2 cm) tall and 13.5 in (34.3 cm) around.
Body
Round 8: Sl st into the V-st sp and make a starting V-st there. Ch 3, sc in the 5th (center) dc of the fan, ch 3. V-st in the next V-st sp, ch 3, sc in the 5th dc of the fan, ch 3. Rep from * around, then join.
(6 V-sts, 6 sc, 12 ch-3 sps)*
Round 9: Work as for Round 7.
(6 V-sts, 6 fans of 9 dc; 66 dc total)
Rounds 10–19: Rep Rounds 8–9 five more times. Round 19 is a fan round.
You now have 9 fan rounds in total (Rounds 3, 5, 7, 9, 11, 13, 15, 17, and 19). The V-sts stack directly on top of each other to form the vertical spines. Each fan starts from a single sc, which leaves an open gap on each side of its base.
Checkpoint: the piece is 13 in (33.0 cm) tall. Each pair of rounds adds 1.5 in (3.8 cm): 4 in + (6 × 1.5 in) = 13 in.
Round 20 (final V-st and sc round): Work as for Round 8.
(6 V-sts, 6 sc, 12 ch-3 sps)
This round adds about 0.5 in (1.3 cm), for a total of 13.5 in (34.3 cm).
Top Band (Border)
Band gauge: 14 sc = 4 in (10.2 cm); 4 rounds = 1 in (2.5 cm).
Round 21 (conversion round): Ch 1. For each of the 6 repeats, work:
– 1 sc in each of the 2 dc of the V-st
– 1 sc in the V-st ch-1 sp
– 2 sc in the ch-3 sp
– 1 sc in the sc
– 2 sc in the next ch-3 sp
Join with a sl st to the first sc.
Stitch count: 18 sc worked one into each existing stitch (2 dc + 1 sc per repeat) + 30 sc added in the spaces (1 + 2 + 2 per repeat) = 48 sc. That is 8 sc per repeat.
Rounds 22–25: Ch 1, sc in each st around, then join. (48 sc)
Per-side count: The band is a seamless tube, so it has no corner stitches. When you flatten it, you get 24 sc on the front and 24 sc on the back, and 24 + 24 = 48.
Why the math works: At 14 sc per 4 in, 48 sc measure 13.7 in (34.8 cm) around. The six fan tops measure 13.5 in (34.3 cm). The band is only a little larger, so it sits flush without ruffling or pulling in. Five rounds give a band 1.25 in (3.2 cm) deep. Checkpoint: the body is 14.75 in (37.5 cm) long. Do not fasten off.
Hanging Strap
Lay the tube flat so the round joins run along one side edge. Then find the 5 center stitches on the back.
Row 1: Sl st along Round 25 to the first of the 5 center back stitches. Ch 1, sc in the same st and in the next 4 sts, then turn. (5 sc)
Rows 2–40: Ch 1, sc in each st across, then turn. (5 sc)
The strap is 1.4 in (3.6 cm) wide and 10 in (25.4 cm) long. Fasten off and leave a 12 in (30.5 cm) tail.
Fold the strap in half toward the inside of the bag. Sew Row 40 to the inside of the band directly behind Row 1, covering Rounds 23–25. This makes a doubled loop about 5 in (12.7 cm) tall. Sew through both layers twice for strength, then weave in the ends.
Drawstring Cord
Ch 100. Starting in the 2nd ch from the hook, sl st in the back bump of each ch across. The cord measures about 24 in (61.0 cm).
Starting at the center front, weave the cord in and out through the 12 ch-2 spaces of Round 2. Because there is an even number of spaces, both ends come out on the same side. Pull the base closed to an opening about 1.5 in (3.8 cm) wide, and tie the cord in a bow.
Tie an overhand knot 0.75 in (1.9 cm) from each cord end, then trim and weave in the tails. Each knot makes a neat little bobble.
Final Blocking
- Weave in all ends, but do not trim them yet.
- Untie the bow and loosen the drawstring.
- Stuff the tube with a rolled towel to a circumference of 13.5 in (34.3 cm).
- Spray it until it is evenly damp.
- Use your fingers to open each fan into a smooth arc and to straighten the V-st spines.
- Shape the band into a straight, even ring.
- Let it dry completely, then trim the tails and retie the bow.
Final Quality-Control Checklist
- Round 1 has 24 sc, and Round 21 has 48 sc.
- All 6 spines run straight from the base to the band.
- Every fan round has its full dc count (5, 7, or 9 dc per fan).
- The body is 14.75 in (37.5 cm) long, and the flat width at the band is 6.9 in (17.5 cm).
- The strap is sewn securely through both layers.
- The drawstring passes through all 12 ch-2 spaces.
Troubleshooting
- The spines lean in a spiral: you are not working into the V-st sp each round. Always sl st into the ch-1 sp before you make the starting V-st.
- The fans cup or ruffle: your dc tension is tight. Use a relaxed dc or go up half a hook size.
- The band ruffles: in Round 21, work 2 sc into each ch-3 sp instead of 3.
- The band pulls in: your tension is tight. Loosen up, or use a 5 mm (US H-8) hook for the band only.
- Bags slip out of the bottom: pull the drawstring tighter, to about 1 in (2.5 cm).
- The strap stretches: add a second row of sewing, or work the strap with a hook one size smaller.
Care
Hand wash or machine wash on a cool gentle cycle in a mesh bag. Lay flat to dry, reshaping the fans while the holder is damp.

Final Notes
Here is the measurement chain from start to finish:
- The 24-sc ring measures 6.9 in (17.5 cm) around.
- The tapered fans bring the piece to 4 in (10.2 cm) tall and 13.5 in (34.3 cm) around.
- Six pairs of body rounds bring it to 13 in (33.0 cm).
- The final V-st and sc round brings it to 13.5 in (34.3 cm).
- The 48-sc band finishes the body at 14.75 in (37.5 cm) long and 13.7 in (34.8 cm) around.
- The 5 in (12.7 cm) loop gives a total hanging length of 19.75 in (50.2 cm).
If you check your size at each step, the holder will hang straight and hold a generous stack of bags.
Happy crocheting!