Seafoam Arches Hanging Toilet Paper Holder Crochet Pattern

The Seafoam Arches holder is a slim wall organizer that stores three spare rolls in a column. Each basket is deep teal, with staggered open arches that read like fish scales and a cream rim with a rolled, corded edge. A solid teal back panel tapers to a tab at the top, which wraps a wooden ring, and to a point at the bottom, which carries a cream tassel.

The look is coastal and a little boho. Teal and cream suit white tile, marble or warm beige walls, and the open arches let you see at a glance when you’re running low.

This pattern uses US crochet terms. Hanging, the finished holder measures about 20.25 in (51.4 cm) from the top fold to the bottom point, plus a 4 in (10.2 cm) tassel. Each basket is about 6 in (15.2 cm) long, 4 in (10.2 cm) deep and 4 in (10.2 cm) tall.

The construction is simple. Work three oval baskets in joined rounds, starting from the base. Work the panel flat in rows, from the bottom point up to the tab. Then add a border round to the panel, sew the baskets on, fold the tab over the ring and attach the tassel.

Finished Size and Construction

  • Finished size (hanging): 5.1 in x 20.25 in (13.0 cm x 51.4 cm), plus the tassel
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton or cotton blend
  • Hooks: 5.0 mm (H-8) for all pieces; 4.5 mm (US 7) for the panel border
  • Number of pieces: 5 (3 baskets, 1 panel, 1 tassel), plus a wooden ring
  • Layout: 1 column x 3 baskets, stacked vertically
  • Piece size: each basket base is 6 in x 4 in (15.2 cm x 10.2 cm); each basket wall is 4 in (10.2 cm) tall
  • Panel size before border: 4.6 in x 21.25 in (11.7 cm x 54.0 cm)
  • Border depth: 0.25 in (0.6 cm)

Materials

Cotton is the best choice here. It holds the arch shapes, stays firm when loaded with rolls and copes with bathroom humidity. Choose a smooth, tightly plied yarn so the arches look crisp.

  • Teal: 160 g, about 255 m
  • Cream: 30 g, about 48 m (rims and tassel)

These quantities include a margin of about 15%.

Tools:
– 5.0 mm (H-8) and 4.5 mm (US 7) hooks
– 1 wooden ring, 2 in (5.1 cm) across
– 6 stitch markers
– Tapestry needle
– Scissors
– A piece of card 4.5 in (11.4 cm) tall, for the tassel

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • sc2tog – single crochet 2 together
  • inc – 2 sc in the same stitch
  • BLO – back loop only
  • rev sc – reverse single crochet (crab stitch): working from left to right, insert the hook into the next stitch to the right, pull up a loop, yarn over and draw through both loops
  • sp – space

Covered arch (special stitch): work 7 sc into a ch-7 space so the chain is completely hidden. This makes a thick, rounded arch with an open window under it.

Gauge and Checkpoints

Gauge: 14 sc and 16 rows = 4 in (10.2 cm) with the 5.0 mm hook.

Make one basket before you start the others. It shows you whether your gauge works in rounds, which is how most of this project is made.

Checkpoints:
– Base after Rnd 4: about 4 in x 2 in (10.2 cm x 5.1 cm)
– Base after Rnd 8: 6 in x 4 in (15.2 cm x 10.2 cm)
– Wall after Rnd 11: 0.75 in (1.9 cm) tall
– Wall after Rnd 13: 1.6 in (4.1 cm)
– Wall after Rnd 15: 2.45 in (6.2 cm)
– Wall after Rnd 17: 3.25 in (8.3 cm)
– Finished basket wall: 4 in (10.2 cm)
– Panel width after Row 8: 4.6 in (11.7 cm)
– Panel length after Row 68: 17 in (43.2 cm)

Too big? Go down one hook size. Too small? Go up one hook size. Each basket should hold a standard roll about 4.25 in (10.8 cm) across, so a base that’s too small matters more than one that’s slightly big.

Teal crocheted bag with cream-trimmed openwork lace detail and wooden handles against a neutral background.

Basket (make 3)

Use teal and the 5.0 mm hook. Join every round with a sl st to the first sc. Each round starts with ch 1, which does not count as a stitch.

Oval Base

Foundation: Ch 9.

Rnd 1: Sc in 2nd ch from hook, sc in next 6 ch, 3 sc in last ch. Working along the opposite side of the chain, sc in next 6 ch, 2 sc in last ch (the same ch as the first sc). Join. (18 sc)

Each end now has 3 stitches and each straight side has 6. From here on, the straight sides stay at 6 stitches and each end gains 3 stitches per round.

Rnd 2: Inc in first st, sc in next 6, inc in each of next 3, sc in next 6, inc in each of last 2. Join. (24 sc)

Rnds 3–8: In each round, k is the round number minus 2, so k = 1 in Rnd 3 and k = 6 in Rnd 8.
[Sc in next k sts, inc] once, sc in next 6, [sc in next k sts, inc] 3 times, sc in next 6, [sc in next k sts, inc] 2 times. Join.

  • Rnd 3: (30 sc)
  • Rnd 4: (36 sc)
  • Rnd 5: (42 sc)
  • Rnd 6: (48 sc)
  • Rnd 7: (54 sc)
  • Rnd 8: (60 sc)

Check that the base measures 6 in x 4 in (15.2 cm x 10.2 cm).

Wall

Rnd 9: Sc in BLO of each st around. Join. (60 sc) This round turns the base edge upward.

Place a marker in st 34 and another in st 49. The 16 stitches from 34 to 49 are centered on one straight side, and they will become the back of the basket that is sewn to the panel.

Rnds 10–11: Sc in each st around. Join. (60 sc)

Rnd 12 (arch round): Sc in first st, [ch 7, sk 3 sts, sc in next st] 14 times, ch 7, sk 3 sts, join to first sc. (15 ch-7 sps) This round uses all 60 stitches: 15 arches x 4 stitches.

Rnd 13 (cover round): Sl st into first ch-7 sp, ch 1, 7 sc in each ch-7 sp around. Join. (15 covered arches = 105 sc)

Rnd 14 (staggered arch round): Sl st in next 3 sc, so you are at the 4th sc of the first arch. Ch 1, sc in same st, [ch 7, sc in 4th sc of next arch] 14 times, ch 7, join to first sc. (15 ch-7 sps)

Each new chain now sits between two arches of the round below. This offset gives the fish-scale look.

Rnd 15: Repeat Rnd 13. (105 sc)

Rnd 16: Repeat Rnd 14. (15 ch-7 sps)

Rnd 17 (conversion round): Sl st into first ch-7 sp, ch 1, 4 sc in each ch-7 sp around. Join. (15 sps x 4 sc = 60 sc) The chains pull nearly straight, leaving a row of small half-open windows and a level edge.

Rnd 18: Sc in each st around. On the final yarn over of the join, change to cream. (60 sc)

Cream Rim

Rnd 19: With cream, ch 1, sc in each st around. Join. (60 sc)

Rnd 20: Ch 1, rev sc in each st around. Join. (60 rev sc) Fasten off and weave in the ends.

The basket wall should measure 4 in (10.2 cm) tall.

Back Panel (make 1)

Use teal and the 5.0 mm hook. Ch 1 at the start of each row; it does not count as a stitch. Turn at the end of every row.

Foundation: Ch 3.

Row 1: Sc in 2nd ch from hook and in next ch. (2 sc)

Rows 2–8 (bottom taper): Inc in first st, sc in each st to last st, inc in last st. Each row has 2 more stitches than the row before.

  • Row 2: (4 sc)
  • Row 3: (6)
  • Row 4: (8)
  • Row 5: (10)
  • Row 6: (12)
  • Row 7: (14)
  • Row 8: (16)

The bottom point is now 2 in (5.1 cm) tall and the panel is 4.6 in (11.7 cm) wide.

Rows 9–68 (straight section): Sc in each st across. (16 sc) These 60 rows measure 15 in (38.1 cm).

Rows 69–73 (top taper): Sc2tog, sc in each st to last 2 sts, sc2tog.

  • Row 69: (14 sc)
  • Row 70: (12)
  • Row 71: (10)
  • Row 72: (8)
  • Row 73: (6)

Rows 74–85 (tab): Sc in each st across. (6 sc) The tab is 1.7 in (4.3 cm) wide and 3 in (7.6 cm) long. Do not fasten off.

The panel is now 85 rows, or 21.25 in (54.0 cm) long.

Make All Pieces

  • 3 baskets: teal Rnds 1–18, cream Rnds 19–20
  • 1 back panel: teal throughout, with a teal border
  • 1 tassel: cream

Tassel: Wrap cream 20 times around the 4.5 in (11.4 cm) card. Slide a 9 in (22.9 cm) strand under the wraps at the top and tie it tightly. Cut the loops at the bottom. Wrap another strand around the tassel 0.4 in (1.0 cm) below the top and tie it off. Trim the ends to 4 in (10.2 cm).

Layout (top to bottom):

      [ ring ]
      [ tab  ]
  [ Basket 1 ]   rows 49–64
  [ Basket 2 ]   rows 30–45
  [ Basket 3 ]   rows 11–26
      [point ]
      [tassel]

Border

Work the border before you attach anything to the panel. Change to the 4.5 mm hook and continue with the teal still attached at the end of Row 85.

Border gauge: 16 sc = 4 in (10.2 cm) with the 4.5 mm hook.

Rnd 1: Ch 1, then work around the panel as follows:

  • Top edge (Row 85): 3 sc in first st, sc in next 4, 3 sc in last st. (10 sc)
  • Left side: 1 sc in each row end, from Row 84 down to Row 2. (83 sc)
  • Bottom edge: working into the foundation ch, 3 sc in each of the 2 sts. (6 sc)
  • Right side: 1 sc in each row end, from Row 2 up to Row 84. (83 sc)

Join. (182 sc) Fasten off.

The 3-sc groups belong to the top and bottom counts, so the side counts do not include any corner stitches.

Why the math works: The panel has 4 rows per inch but only 3.5 stitches per inch. Working 1 sc per row end puts 4 sc on every inch of side edge. With the 5.0 mm hook that would ruffle. With the 4.5 mm hook the border stitches measure 4 per inch, so they match the row-end spacing exactly and the edge stays flat.

With the border, the panel measures 5.1 in x 21.75 in (13.0 cm x 55.2 cm).

Joining

Use a long teal tail and the tapestry needle. Whipstitch each basket to the panel with matching stitch counts:

  1. Find the back stitches. On a basket, the 16 back stitches of Rnd 9 are already marked (sts 34–49). Count straight up the wall and mark the 16 Rnd 18 stitches directly above them.
  2. Position the bottom basket. Line up the marked Rnd 9 stitches with the 16 stitches of panel Row 11. Whipstitch them one to one, 16 to 16.
  3. Sew the top of the wall. Line up the marked Rnd 18 stitches with panel Row 26 and whipstitch them one to one, 16 to 16. Rnd 18 sits 16 rows above Rnd 9 on the panel, which matches the 4 in (10.2 cm) wall height to 16 panel rows.
  4. Tack the sides. Tack the two side edges of the back wall to the panel’s border, about every 0.5 in (1.3 cm).
  5. Repeat for the other baskets. Sew the middle basket to Rows 30 and 45, and the top basket to Rows 49 and 64.

Tension: Pull each stitch snug but not tight. The seam should lie as flat as the fabric around it. If it puckers, the basket will tilt forward under the weight of a roll.

Size checkpoint: The bottom basket starts 2.75 in (7.0 cm) above the bottom point. There is a 0.75 in (1.9 cm) gap between baskets and 1 in (2.5 cm) of straight panel above the top basket.

Finishing:
1. Fold the tab over the wooden ring so that 1.5 in (3.8 cm) of it sits behind the panel, and whipstitch it down.
2. Tie the tassel to the bottom point using its top strand.

Final Blocking

  1. Lightly mist the panel and pin it flat to a mat at 5.1 in x 21.75 in (13.0 cm x 55.2 cm). Keep the tab unpinned if you have already sewn it.
  2. Stuff each basket with a toilet roll or a folded towel so the walls hold a round shape.
  3. Use your fingers to open each arch evenly and straighten the cream rims.
  4. Let everything dry completely, then remove the pins.
  5. Steam the tassel lightly and comb the strands straight.

Final Quality-Control Checklist

  • [ ] Each base measures 6 in x 4 in (15.2 cm x 10.2 cm), with 60 sc in Rnd 8.
  • [ ] Each basket wall is 4 in (10.2 cm) tall, with 15 arches per layer.
  • [ ] The arch layers are staggered, not stacked directly on top of each other.
  • [ ] The cream rim is even, with 60 rev sc.
  • [ ] The panel border has 182 sc and both side edges are flat.
  • [ ] The baskets are sewn 16 to 16 at both the base and the rim.
  • [ ] The tab is secure around the ring.
  • [ ] The hanging length is 20.25 in (51.4 cm).

Troubleshooting

  • Base curls up: Your tension is too tight. Go up a hook size or relax your grip on the yarn.
  • Base ruffles: Your increases may be stacking too sharply at the ends. Check that the round counts are 30, 36, 42, 48, 54 and 60.
  • Arches sag: Make sure you work all 7 sc in each ch-7 space so the chain is fully covered.
  • Arches don’t stagger: In Rnds 14 and 16, anchor each chain in the 4th sc of an arch, not in the gap between arches.
  • Panel side edges wave: Rework the border with the 4.5 mm hook.
  • Basket tilts forward: Re-tack the sides of the back wall and check the rim seam.

Care

Hand wash in cool water with mild soap, press out the water in a towel, and dry flat with the baskets stuffed to hold their shape. Do not tumble dry.

Teal crochet toilet paper holder displaying three white rolls with cream trim on a neutral bathroom wall.

Final Notes

The measurement chain works like this:

  • Gauge of 14 sc = 4 in (10.2 cm) gives a 60-stitch base of 6 in x 4 in (15.2 cm x 10.2 cm).
  • Twelve wall rounds build a 4 in (10.2 cm) basket wall.
  • Sixteen panel stitches give a 4.6 in (11.7 cm) panel, and its 85 rows give 21.25 in (54.0 cm).
  • A 182-stitch border brings the panel to 5.1 in x 21.75 in (13.0 cm x 55.2 cm).
  • Folding the tab leaves a hanging length of 20.25 in (51.4 cm).

If you check each link in that chain as you go, the baskets will fit the panel exactly.

Happy crocheting!

Leave a Comment