This hanging holder stores three rolls of toilet paper in a slim column of open honeycomb baskets. Each basket has a solid round base, an airy hexagon-mesh wall and a thick rolled rim. Two edged straps carry all three baskets up to a single wooden ring.
The sample is made in one soft butter-yellow cotton. A pale color makes the honeycomb holes stand out against white rolls and a light wall, but any solid color works. Cotton is the right fiber here because it holds the basket shape and stands up to bathroom humidity.
The pattern uses US crochet terms throughout. The finished holder measures about 6.25 in (15.9 cm) wide and 22.5 in (57.2 cm) long from the bottom of the ring to the base of the lowest basket. Each basket is 5.75 in (14.6 cm) across and 4.25 in (10.8 cm) tall.
Construction is simple. You crochet three identical baskets in joined rounds, from the center of the base up to the rim. Then you make two flat straps in short rows, with a single round of edging around each one. Sew the straps to the baskets, work the rims, and fold the strap tops over the ring.
Finished Size and Construction
- Finished size: 6.25 in (15.9 cm) wide x 22.5 in (57.2 cm) long, plus a 3 in (7.6 cm) ring
- Skill level: Easy–Intermediate
- Terminology: US
- Yarn weight: Bulky (#5) cotton
- Hook: 6 mm (US J-10)
- Number of pieces: 3 baskets, 2 straps, 1 wooden ring
- Layout: 1 column of 3 baskets, with straps on the left and right sides
- Piece size: each basket is 5.75 in (14.6 cm) across x 4.25 in (10.8 cm) tall; each strap is 1.25 in (3.2 cm) x 24 in (61.0 cm)
- Size before border: basket wall through Rnd 17 is 54 sts and 18 in (45.7 cm) around
- Border depth: 3 rim rounds, about 1 in (2.5 cm)
Materials
Yarn: Use a smooth bulky cotton or cotton-blend yarn of about 110 m per 100 g. Avoid fuzzy or very stretchy yarns, because they blur the hexagons and let the baskets sag.
- Butter yellow: 300 g (330 m) in total. Each basket takes about 65 g (72 m), each strap about 25 g (28 m), and sewing takes about 5 g (6 m).
Tools:
– 6 mm (US J-10) crochet hook
– One 3 in (7.6 cm) smooth wooden ring
– Tapestry needle
– 4 locking stitch markers
– Measuring tape
– Rust-proof pins and a blocking mat
– One standard roll of toilet paper, used for fitting
The quantities above include a margin of roughly 15% for gauge differences and a test swatch.
Abbreviations (US Terms)
- ch: chain
- sc: single crochet
- sl st: slip stitch
- st(s): stitch(es)
- sp: space
- BLO: back loop only
- rev sc: reverse single crochet (crab stitch)
- Rnd: round
Special stitch: Knot. Work (sc, ch 2, sc) all in the stitch or space indicated. Each knot makes one short horizontal bar of the honeycomb. Its ch-2 space becomes the top or bottom of a hexagon.
Gauge and Checkpoints
Gauge: 12 sc and 13 rnds = 4 in (10.2 cm) in single crochet. In honeycomb mesh, 4 mesh rounds = 2 in (5.1 cm) tall.
Test one piece first. Make one complete basket before starting the others, and check these measurements as you go:
- After Rnd 4 (24 sts): the base should be about 2.5 in (6.4 cm) across.
- After Rnd 9 (54 sts): the base should be about 5.5 in (14.0 cm) across, lying flat.
- After Rnd 16: the wall should be about 3.1 in (7.9 cm) tall, and the circumference about 18 in (45.7 cm).
- After Rnd 20: the basket should be 4.25 in (10.8 cm) tall and 5.75 in (14.6 cm) across the outside.
If the basket is too big: go down to a 5.5 mm hook.
If the basket is too small: go up to a 6.5 mm hook.
If the base ruffles or cups: the base gauge is off. Fix the hook size first. Do not change the increases, because the 54-stitch count must stay fixed for the mesh repeat.
A standard roll of about 4.5 in (11.4 cm) across should drop in easily, with about 0.6 in (1.5 cm) of ease all around.

Basket (Make 3)
Base
The base is worked in joined rounds. Join each round with a sl st to the first sc, then ch 1. The ch 1 does not count as a stitch.
Rnd 1: Make a magic ring, ch 1, work 6 sc in the ring, join. (6 sts)
Rnd 2: 2 sc in each st around. (12 sts)
Rnd 3: Sc in next st, 2 sc in next st 6 times. (18 sts)
Rnd 4: Sc in next st, 2 sc in next st, sc in next 2 sts, 2 sc in next st 5 times, sc in next st. (24 sts)
Rnd 5: Sc in next 3 sts, 2 sc in next st 6 times. (30 sts)
Rnd 6: Sc in next 2 sts, 2 sc in next st, sc in next 4 sts, 2 sc in next st 5 times, sc in next 2 sts. (36 sts)
Rnd 7: Sc in next 5 sts, 2 sc in next st 6 times. (42 sts)
Rnd 8: Sc in next 3 sts, 2 sc in next st, sc in next 6 sts, 2 sc in next st 5 times, sc in next 3 sts. (48 sts)
Rnd 9: Sc in next 7 sts, 2 sc in next st 6 times. (54 sts)
The staggered increases keep the base a round circle rather than a hexagon. The base should now be 5.5 in (14.0 cm) across.
Bottom Band
Rnd 10: Sc in BLO of each st around. (54 sts) The unused front loops form a neat ridge on the outside, and the work starts to turn upward.
Rnd 11: Sc in each st around. (54 sts)
These two solid rounds form the bottom band. Later, the straps are sewn to this band.
Honeycomb Wall
Rnd 12 (first mesh round): Ch 1, knot in next st, ch 3, skip next 2 sts 18 times. Join with a sl st to the first sc. (18 knots, 18 ch-3 sps)
Rnd 13: Sl st into the next ch-3 sp. Ch 1, knot in the same sp, ch 3, knot in next ch-3 sp, ch 3 17 times. Join to the first sc. (18 knots, 18 ch-3 sps)
Rnds 14–16: Repeat Rnd 13. (18 knots, 18 ch-3 sps in each round)
Each round places its knots above the ch-3 spaces of the round below, and its ch-3 spaces above the knots below. This offset is what closes each opening into a six-sided cell. Pull every knot snug so the bars stay short and crisp.
Checkpoint: the mesh band should be 2.5 in (6.4 cm) tall, with no flare and no pull-in.
Closing Round
Rnd 17 (conversion round): Sl st into the first ch-2 sp. Ch 1, sc in the ch-2 sp of the knot, 2 sc in the next ch-3 sp 18 times. Join.
That makes 18 sts (one per knot) + 36 sts (two per ch-3 sp) = 54 sts.
This round brings the wall back to exactly the base count, so the rim sits straight above the base. Fasten off and weave in the ends. Leave the rim rounds (Rnds 18–20) for the Border section, which you will work after joining.
Basket total so far: Rnds 1–17, with 54 sts at the top edge.
Strap (Make 2)
Row 1: Ch 3. Sc in the 2nd ch from the hook and in the next ch. Turn. (2 sts)
Rows 2–76: Ch 1, sc in each st across, turn. (2 sts)
Checkpoint: after 38 rows, the strap should be 11.75 in (29.8 cm) long. After 76 rows, it should be about 23.4 in (59.4 cm).
Edging round: Do not turn. Ch 1, then work one sc in the side of each row down the long side (76 sts). Work 3 sc in each of the 2 foundation sts (6 sts). Work one sc in the side of each row up the other long side (76 sts). Finish with 3 sc in each of the 2 sts of Row 76 (6 sts). Join.
The edging round totals 76 + 6 + 76 + 6 = 164 sts.
Working 3 sc into every end stitch rounds off the strap ends. The edging adds one stitch height to each end, bringing the strap to 24 in (61.0 cm) long and 1.25 in (3.2 cm) wide. Fasten off, leaving a 30 in (76.2 cm) tail for sewing.
Make All Pieces
Here are the quantities, all in butter yellow:
- Baskets: 3, worked through Rnd 17
- Straps: 2, edged
- Wooden ring: 1
Layout grid (view from the front; S = strap, B = basket):
[ RING ]
/ \
S S
S [ B3 ] S top basket
S S 1.5 in gap
S [ B2 ] S middle basket
S S 1.5 in gap
S [ B1 ] S bottom basket
Joining
Method: Whipstitch with the strap tail through the strap edging and the basket’s solid rounds.
- Flatten each basket so that Rnd 17 has two halves of 27 sts each. Mark stitch 1 and stitch 28 of Rnd 17, and mark the same two positions on Rnd 11. These marks are the two strap lines, exactly opposite each other.
- Lay both straps flat. Measure from the bottom end of each strap and place a pin at 4.25 in (10.8 cm), 5.75 in (14.6 cm), 10 in (25.4 cm), 11.5 in (29.2 cm) and 15.75 in (40.0 cm). These pins mark the basket zones and the 1.5 in (3.8 cm) gaps.
- Bottom basket: Center a strap over each strap line. Line the strap’s bottom end up with the base edge, and work 6 whipstitches through the strap and Rnds 10–11. Move up to Rnd 17 (just below the 4.25 in pin) and work 6 whipstitches through the strap and that round. Each strap stitch meets one basket stitch, so 2 strap edging sts sit across 2 basket sts per row of whipstitching.
- Middle basket: Repeat step 3 between the 5.75 in and 10 in pins.
- Top basket: Repeat step 3 between the 11.5 in and 15.75 in pins.
Tension: Pull each whipstitch just firm enough to close the gap. If you pull harder, the strap puckers and the basket wall dents inward. Leave the mesh between Rnd 11 and Rnd 17 free; the strap only needs to be anchored at the solid bands.
Checkpoint: from the bottom of the lowest basket to the top of the top basket’s Rnd 17 should be about 15 in (38.1 cm). The full 15.75 in (40.0 cm) is reached once the rims are added.
Border: Basket Rim
The rim is worked after joining, so that it rolls over the strap and locks it in place.
Border gauge: 12 sc = 4 in (10.2 cm). That gives 54 sts = 18 in (45.7 cm) around, matching both the base and Rnd 17.
On each basket, join yarn with a sl st in stitch 1 of Rnd 17, just inside the strap. Work all rim stitches into the basket stitches only, keeping the strap on the outside.
Rnd 18: Ch 1, sc in each st around, join. (54 sts: 27 on each side between the straps)
Rnd 19: Ch 1, sc in each st around, join. (54 sts: 27 on each side)
Rnd 20: Ch 1, rev sc in each st around, join. (54 sts: 27 on each side) Fasten off.
Use a yarn tail to make 4 tacking stitches through each strap and Rnd 20, wrapping the yarn around twice so that it forms a small knob where the strap crosses the rim.
Why the math works: the base ends at 54 sts, and every wall round uses 3 sts per honeycomb repeat (18 x 3 = 54). Rnd 17 also returns exactly 54 sts. The rim therefore needs no increases or decreases, and the two 27-stitch halves place the straps exactly opposite each other.
The rim adds about 1 in (2.5 cm) of height, bringing each basket to 4.25 in (10.8 cm).
Ring: Above the top basket there is 8.25 in (21.0 cm) of free strap. Pass the end of each strap through the ring from front to back, and fold back 1.5 in (3.8 cm). Whipstitch the end flat across all 164-st-edging layers, about 6 stitches. This leaves 6.75 in (17.1 cm) of strap between the top basket and the ring, with the two straps angling in to meet at the ring.
Final Blocking
- Dampen the holder thoroughly with cool water, then press out the water in a towel. Do not wring it.
- Stand a roll of toilet paper wrapped in plastic inside each basket to support the walls.
- Lay the holder flat on its back on the blocking mat.
- Pin the straps straight and parallel up to the ring, keeping the 1.5 in (3.8 cm) gaps between baskets.
- Gently open each hexagon with your fingertips so the cells are even all the way around.
- Shape each rim into a smooth roll.
- Let it dry completely, 24–48 hours, then remove the pins and forms.
Final Quality-Control Checklist
- Each base is flat and 5.5 in (14.0 cm) across.
- Every wall round has 18 knots and 18 ch-3 spaces.
- Rnds 9, 17, 18, 19 and 20 each have exactly 54 sts.
- Each strap’s edging has 164 sts, and each strap is 24 in (61.0 cm) long.
- The straps are exactly opposite each other on every basket (27 sts apart).
- The gaps between baskets are 1.5 in (3.8 cm).
- The holder hangs straight, with no twist in either strap.
- All ends are woven in at least 2 in (5.1 cm) through solid stitches.
Troubleshooting
- The base cups: it is too tight. Go up a hook size, or check that you made all 6 increases in every round.
- The base ruffles: it is too loose, or has extra increases. Recount against the stitch counts.
- The wall flares outward: the ch-3 spaces are too long. Keep the chains firm, or go to ch 2 if your chains run large.
- The holes look like diamonds, not hexagons: pull each knot snug so its ch-2 forms a flat bar.
- Rnd 17 isn’t 54 sts: you skipped a knot. Make sure every ch-3 space gets 2 sc.
- The holder tilts: one strap is sewn higher than the other. Re-measure the pins from each strap’s bottom end.
- The rolls fit tightly: your gauge is short. Remake with a larger hook rather than adding stitches.
Care
Hand wash in cool water with mild soap, press the water out in a towel, and dry flat with the baskets reshaped. Remove the wooden ring before washing if possible.

Final Notes
The measurement chain is straightforward. A gauge of 12 sc per 4 in (10.2 cm) gives a 54-stitch base 5.5 in (14.0 cm) across. Those 54 sts make 18 honeycomb repeats of 3 sts each, and Rnd 17 returns to exactly 54 sts. A 54-st rim brings each basket to 4.25 in (10.8 cm) tall and 5.75 in (14.6 cm) across.
Two 24 in (61.0 cm) straps carry three baskets with 1.5 in (3.8 cm) gaps, for a 15.75 in (40.0 cm) stack. Adding 6.75 in (17.1 cm) of strap up to the ring gives a finished length of 22.5 in (57.2 cm). Check each stage, and the whole holder will hang straight and hold its rolls neatly.
Happy crocheting!