This hanging holder stacks three octagonal baskets on two sturdy straps. Each basket holds one standard roll. The whole piece hangs from a single wooden ring, which keeps spare rolls off the floor and within reach.
The look comes from the walls. Every basket has eight square lace panels, and each panel shows an 8-petal flower inside a solid frame. Raised seam ridges outline every panel, and a rolled crab-stitch rim finishes the top edge. The whole piece uses one deep teal yarn, so the texture carries the design.
The pattern uses US crochet terms. The finished holder is about 26 in (66.0 cm) long from the top of the ring to the bottom of the lowest basket. Each basket measures 7.25 in (18.4 cm) across flat sides and 3.75 in (9.5 cm) tall.
The construction is modular. First you make 24 flower squares, 3 octagon bases, and 2 straps. Then you join 8 squares into a ring for each basket, close the bottom with a base, add the rim, and sew the baskets onto the straps.
Finished Size and Construction
- Finished length: about 26 in (66.0 cm), including the ring
- Basket: 7.25 in (18.4 cm) across flat sides, 7.75 in (19.7 cm) across corners, 3.75 in (9.5 cm) tall
- Skill level: Intermediate
- Terminology: US
- Yarn weight: worsted (#4) cotton or cotton blend
- Hook: 4.0 mm (G-6)
- Number of pieces: 24 squares, 3 bases, 2 straps (29 pieces)
- Layout: 3 baskets stacked vertically, each with 8 squares around 1 octagon base
- Piece size: square 3 in (7.6 cm); base side 3 in (7.6 cm); strap 26 in × 0.8 in (66.0 cm × 2.0 cm)
- Basket height before border: 3.25 in (8.3 cm)
- Border depth: 0.5 in (1.3 cm)
Materials
Use a firm worsted cotton. It holds the octagon shape well and resists stretching under the weight of the rolls. Soft acrylic will work, but the walls will be floppier.
- Deep Teal: 250 g, about 425 m (465 yd)
The quantity includes a margin of about 20% for gauge swatches and differences in tension.
Tools:
– 4.0 mm (G-6) crochet hook
– Wooden ring, 2.75 in (7.0 cm) diameter
– Tapestry needle
– Stitch markers
– Rust-proof pins and a blocking mat
– Spray bottle
– Scissors
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- sp: space
- st(s): stitch(es)
- rep: repeat
- RS / WS: right side / wrong side
- rev sc: reverse single crochet (crab stitch)
Special stitches:
– 3-dc cluster (cl): [Yarn over, insert hook in the stitch, pull up a loop, yarn over, pull through 2 loops] 3 times in the same stitch. Yarn over and pull through all 4 loops.
– Beginning cluster: Ch 2, then work a 2-dc cluster (the same method, repeated twice) in the same stitch.
– Rev sc: Working left to right, insert the hook in the next stitch to the right, pull up a loop, yarn over, and pull through both loops.
Gauge and Checkpoints
- Sc gauge: 18 sts and 20 rows = 4 in (10.2 cm)
- Hdc gauge: 18 sts and 14 rounds = 4 in (10.2 cm)
Make one complete square before you make the rest, then block it and measure it.
Square checkpoints:
– After Round 2: about 2 in (5.1 cm) across
– After Round 3: about 2.5 in (6.4 cm) square
– After Round 4: 3 in (7.6 cm) square
Base checkpoints:
– After Round 6: 3.5 in (8.9 cm) across flat sides
– After Round 12: 6.75 in (17.1 cm)
– After Round 13: 7.25 in (18.4 cm)
The square and the base must both end with sides of 3 in (7.6 cm) so that they match.
- If your square is larger than 3 in (7.6 cm), go down 0.5 mm in hook size.
- If your square is smaller, go up 0.5 mm.
Check the base as well. If it cups, your hdc is too short, so loosen up or go up 0.5 mm for the base only. If it ruffles, tighten up or go down 0.5 mm.

Flower Square (make 24)
Round 1: Make a magic ring, ch 1, and work 8 sc in the ring. Join with a sl st to the first sc. (8 sc)
Round 2: Work a beginning cluster in the same st, ch 3. Work a 3-dc cl in the next st, ch 3; rep from * 6 more times. Join to the top of the beginning cluster. (8 clusters, 8 ch-3 sps)*
These clusters form the 8 flower petals.
Round 3:
1. Sl st into the first ch-3 sp. Ch 1, sc in the same sp, ch 2.
2. Work (3 dc, ch 2, 3 dc) in the next sp for the corner, then ch 2.
3. *Sc in the next sp, ch 2, work (3 dc, ch 2, 3 dc) in the next sp, ch 2; rep from * 2 more times.
4. Join to the first sc.
(24 dc, 4 sc, 4 corner ch-2 sps, 8 side ch-2 sps)
The side ch-2 spaces create the lacy openings around the flower.
Round 4:
1. Ch 1, sc in the same sc.
2. *Work 2 sc in the next ch-2 sp, sc in the next 3 dc, (sc, ch 2, sc) in the corner sp, sc in the next 3 dc, 2 sc in the next ch-2 sp, sc in the next sc; rep from * 3 more times.
3. On the last repeat, leave out the final sc. Join to the first sc.
(52 sc and 4 corner ch-2 sps)
Each side has 13 sc, counted from one corner sc to the next and including both corner sc: 1 + 3 + 2 + 1 + 2 + 3 + 1 = 13. The ch-2 corner spaces are not stitches.
Fasten off, leaving a 6 in (15.2 cm) tail, and weave it in. Block each square to 3 in (7.6 cm).
Octagon Base (make 3)
Work in joined rounds with the RS facing. The ch 2 at the start of each hdc round does not count as a stitch.
Round 1: Make a magic ring, ch 2, and work 8 hdc in the ring. Join. (8 hdc)
Round 2: Ch 2, work 2 hdc in each st. Join. (16 hdc)
Rounds 3–12: Ch 2. *Hdc in the next (R − 2) sts, then 2 hdc in the next st; rep from * 7 more times. Join. Here “R” is the current round number.
The round totals are:
| Round | Total sts |
|---|---|
| 3 | 24 |
| 4 | 32 |
| 5 | 40 |
| 6 | 48 |
| 7 | 56 |
| 8 | 64 |
| 9 | 72 |
| 10 | 80 |
| 11 | 88 |
| 12 | 96 |
Each round has 8 more stitches than the round before, one increase on each of the 8 sides. Keep the increases stacked, because they form the octagon corners. Move a marker up at each corner if it helps.
Round 13: Ch 1. Sc in the next 11 sts, 2 sc in the next st; rep from * 7 more times. Join. (104 sc, 13 per side)*
Fasten off and weave in the ends. Each side should measure 3 in (7.6 cm) and should have 13 sts, matching one square.
Strap (make 2)
Foundation: Ch 118.
Row 1: Sc in the 2nd ch from the hook and in each ch across. (117 sc)
Rows 2–4: Ch 1, turn, sc in each st across. (117 sc)
Fasten off. The strap should measure 26 in × 0.8 in (66.0 cm × 2.0 cm).
Make All Pieces
- Flower squares: 24 (8 per basket)
- Octagon bases: 3
- Straps: 2
Layout, viewed from the front:
( RING )
/ \
strap A strap B
| [Basket 1: S1-S8 + Base] |
| gap 1.75 in (4.4 cm) |
| [Basket 2: S1-S8 + Base] |
| gap 1.75 in (4.4 cm) |
| [Basket 3: S1-S8 + Base] |
One basket, panel order around the wall:
S1 | S2 | S3 | S4 | S5 | S6 | S7 | S8 | (back to S1)
^ strap A at seam S8/S1 strap B at seam S4/S5 ^
Joining
Panels into a ring. Hold S1 and S2 with their WS together. Working through both layers, work:
– 1 sc in the corner ch-2 sp
– 1 sc in each of the next 13 sts
– 1 sc in the next corner ch-2 sp
That makes 15 sc per seam. The ridge sits on the outside and frames each panel. Join S2 to S3 the same way, and continue until S8 is joined back to S1. A basket has 8 seams in total.
Base into the ring. Place the base inside the panel ring with the WS together and the base RS facing up into the basket. Line up each base side with the bottom edge of one panel. Working from the outside through both layers:
1. Sc in each of the 13 panel sts together with the 13 base sts on that side.
2. At each vertical seam, work 1 sc into the bottom end of the seam ridge only. The base’s corner increase sits directly behind it.
That makes 8 × (13 + 1) = 112 sc. Join and fasten off.
Tension: Keep the joins at the same tension as the squares. If a seam puckers, use a hook 0.5 mm larger for the joins only.
Checkpoint: The basket should measure 7.25 in (18.4 cm) across flat sides and 3.25 in (8.3 cm) tall before the border.
Straps and ring. Do these steps after the border and blocking.
1. Mark seam S8/S1 and seam S4/S5 on each basket.
2. Lay the straps flat. Measuring up from the bottom end of each strap, pin the baskets at these positions:
– Basket 3: 0–3.75 in (0–9.5 cm)
– Basket 2: 5.5–9.25 in (14.0–23.5 cm)
– Basket 1: 11–14.75 in (27.9–37.5 cm)
3. Sew each strap along both long edges over its seam ridge, through the base edge and the rim.
4. Wrap the top 2 in (5.1 cm) of each strap around the ring and sew it down securely.
Border
Border gauge: 18 sc = 4 in (10.2 cm). The rim is 3 rounds deep, about 0.5 in (1.3 cm).
Join the yarn at the top of any seam with the RS facing.
Round 1: Ch 1. Sc in each of the 13 top sts of the next panel, then 1 sc into the top end of the next seam ridge; rep from * 7 more times. Join. (112 sc: 14 per side × 8 sides)*
Round 2: Ch 1, sc in each st. Join. (112 sc)
Round 3: Ch 1, rev sc in each st. Join. (112 rev sc)
Fasten off and weave in the ends.
Why the math works: Each side starts from one panel’s own 13 sts. The single extra stitch at each seam is counted once, and the corner sc are not added again. Every round stays at 112 sts, which is 14 per side, so the walls rise straight with no flaring. The rim is 24 in (61.0 cm) around, and 112 sts over that length gives about 4.7 sts per inch. That is slightly tighter than gauge, which keeps the rim firm.
Final Blocking
- Mist each basket until it is damp but not soaked.
- Set each basket over a box or container that is about 7.25 in (18.4 cm) across.
- Pinch the 8 seam ridges straight and line the corners up vertically.
- Press the base flat against the bottom of the form.
- Lay the straps flat, mist them, and smooth them to 26 in (66.0 cm).
- Let everything dry completely before you attach the straps.
Final Quality-Control Checklist
- [ ] Every square has 13 sc per side and measures 3 in (7.6 cm)
- [ ] Every base has 104 sts and 8 sharp corners
- [ ] Every basket has 8 seams of 15 sc each
- [ ] The base join and every rim round each have 112 sts
- [ ] The baskets measure 7.25 in (18.4 cm) across and 3.75 in (9.5 cm) tall
- [ ] The gaps between baskets are 1.75 in (4.4 cm)
- [ ] The straps line up with the same seams on all three baskets
- [ ] The ring hangs level and is sewn securely
- [ ] All ends are woven in
Troubleshooting
- The base cups: Your hdc is too tight. Go up 0.5 mm for the base only.
- The base ruffles: Your hdc is too loose. Go down 0.5 mm.
- The base and walls don’t line up: Recount Round 13 and the square’s Round 4. Both must have 13 per side.
- The rim flares: Check that Round 1 has exactly 112 sts.
- The holder hangs crooked: Re-measure the basket positions on both straps.
- The walls slump: Re-block over a firm form, or use a firmer cotton.
Care
Hand wash in cool water and reshape the baskets while damp. Lay everything flat to dry.

Final Notes
Everything depends on one chain of measurements. The 3 in (7.6 cm) square has 13 sc per side. The 13-round base also ends with 13 sts on each side. Joining 8 squares around one base gives a basket 7.25 in (18.4 cm) across, and the 112-stitch rim brings each basket to 3.75 in (9.5 cm) tall. Three baskets spaced 1.75 in (4.4 cm) apart on two 26 in (66.0 cm) straps give a holder about 26 in (66.0 cm) long, ring included. If you check each stage before moving on, the rest of the pieces will fit together.
Happy crocheting!