The Lavender Frost Tree is a small, lacy Christmas ornament made from soft lavender fan shells and crisp cream chain arches. The tiers stack into a classic stepped tree shape, a cream outline frames the whole piece, and a solid little lavender trunk finishes the bottom.
The colors keep it soft and wintry: lavender for the fans and trunk, cream for the arches, border and hanging loop. Cotton yarn gives clear stitch definition, so every fan and arch shows up well against tree lights.
This pattern uses US crochet terms. The finished ornament is 4.75 in (12.1 cm) wide and 5 in (12.7 cm) tall, not counting the hanging loop, which adds about 1.25 in (3.2 cm).
The tree is worked top-down in rows, always with the right side facing, switching color on every row. Lavender rows add the fans. Cream rows add the arches that hold the next tier. After the body is done, one cream border round outlines it and makes the loop, and then the trunk is worked off the bottom border.
Finished Size and Construction
- Finished size: 4.75 in (12.1 cm) wide × 5 in (12.7 cm) tall, plus a 1.25 in (3.2 cm) loop
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: DK (light worsted, #3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 1 (single ornament)
- Layout: 4 stacked fan tiers (1, 2, 3 and 4 fans), with a trunk at the bottom center
- Piece size before border: 4.5 in (11.4 cm) wide × 4 in (10.2 cm) tall
- Border depth: about 0.125 in (0.3 cm) on each edge
- Trunk: 1 in (2.5 cm) wide × 0.75 in (1.9 cm) long
Materials
Yarn: Use a smooth DK-weight cotton or cotton blend, about 50 g / 120 m per ball. Mercerized cotton gives the sharpest fans. Acrylic also works, but it stretches more, so expect to block a little harder.
- Color A – Lavender (fans and trunk): 6 g, about 15 m
- Color B – Cream (arches, border, loop): 5 g, about 12 m
These amounts include a margin for joining tails and one gauge swatch.
Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– Scissors
– Stitch marker
– Blocking mat and rust-proof pins
– Spray bottle with water
– Ruler or tape measure
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- st(s) – stitch(es)
- sp – space
- MR – magic ring
- RS – right side
Special stitch: Fan – Work 7 dc into the same space.
Ch-5 arch – A chain of 5 that skips over stitches and is anchored by an sc at each end.
Color changes: Each row is worked with the RS facing. Fasten off at the end of each row and join the next color at the starting edge. Crochet over the tails for the first few stitches so you have fewer ends to weave in later.
Gauge and Checkpoints
Gauge is not critical for an ornament, but it does control the final size and how well the tiers sit.
Gauge: One Fan made into a magic ring (Row 1) measures about 1.125 in (2.9 cm) wide and 0.6 in (1.5 cm) tall. For the trunk, 5 sc measure 1 in (2.5 cm) wide and 5 sc rows measure 0.75 in (1.9 cm) tall.
Test first: Work Rows 1–2 and measure before you go on.
Checkpoints (unblocked, measured flat):
– After Row 2: 1.125 in (2.9 cm) wide, 1 in (2.5 cm) tall
– After Row 4: 2.25 in (5.7 cm) wide, 2 in (5.1 cm) tall
– After Row 6: 3.375 in (8.6 cm) wide, 3 in (7.6 cm) tall
– After Row 8: 4.5 in (11.4 cm) wide, 4 in (10.2 cm) tall
Too big? Go down to a 3.25 mm (D-3) hook, or chain more snugly on the arches.
Too small? Go up to a 3.75 mm (F-5) hook.
Arches that come out too tight will cup the tier. Arches that come out too loose will make it sag. Aim for chains about as wide as your sc.

Pattern: Tree Body
Every lavender row with n fans has 7n dc plus (n + 1) sc (Row 1 has no sc). Every cream row worked under n fans has (n + 2) sc and (n + 1) ch-5 arches. Each new lavender row places one Fan in every arch, so each tier gains one fan.
Row 1 – Tier 1 Fan (Lavender)
With A, make a MR. Ch 3 (counts as dc), 6 dc in ring. Pull the ring tight. Fasten off. (7 dc – 1 Fan)
The ring is the top point of the tree, and the Fan opens downward.
Row 2 – Tier 1 Arches (Cream)
With RS facing, join B with an sc in the top of the beginning ch-3. Ch 5, skip 2 dc, sc in the 4th (center) dc. Ch 5, skip 2 dc, sc in the last dc. Fasten off. (3 sc, 2 ch-5 arches)
The first and last sc are the corner sc of this tier. The middle sc is the center sc.
Row 3 – Tier 2 Fans (Lavender)
Join A with an sc in the first sc. [Fan in next ch-5 arch, sc in next sc] 2 times. Fasten off. (14 dc + 3 sc = 17 sts – 2 Fans)
Row 4 – Tier 2 Arches (Cream)
Join B with an sc in the first dc of Fan 1 (the outer dc, skipping the lavender edge sc). Ch 5, sc in the center (4th) dc of Fan 1. Ch 5, sc in the center dc of Fan 2. Ch 5, sc in the last dc of Fan 2 (skip the final lavender sc). Fasten off. (4 sc, 3 ch-5 arches)
Skipping the lavender edge sc is what makes the tiers step outward. The new corner sc sits at the lower outer tip of the outer fan.
Row 5 – Tier 3 Fans (Lavender)
Join A with an sc in the first sc. [Fan in next ch-5 arch, sc in next sc] 3 times. Fasten off. (21 dc + 4 sc = 25 sts – 3 Fans)
Row 6 – Tier 3 Arches (Cream)
Join B with an sc in the first dc of Fan 1. Ch 5, [sc in center dc of next Fan, ch 5] 3 times, sc in the last dc of Fan 3. Fasten off. (5 sc, 4 ch-5 arches)
Row 7 – Tier 4 Fans (Lavender)
Join A with an sc in the first sc. [Fan in next ch-5 arch, sc in next sc] 4 times. Fasten off. (28 dc + 5 sc = 33 sts – 4 Fans)
Row 8 – Tier 4 Arches (Cream)
Join B with an sc in the first dc of Fan 1. Ch 5, [sc in center dc of next Fan, ch 5] 4 times, sc in the last dc of Fan 4. Fasten off. (6 sc, 5 ch-5 arches = 31 sts)
The 6 sc in Row 8 are 2 corner sc plus 4 center sc. Check the size: 4.5 in (11.4 cm) wide × 4 in (10.2 cm) tall.
Weave in all body ends now, before the border. Hide each tail inside the stitches of its own color.
Border
The border is one round of cream sc around the outside edge only. The arches from Rows 2, 4 and 6 stay open on the inside of the tree. The border also makes the hanging loop.
Border gauge: About 6 sc per 1 in (2.5 cm) along the edge. The scalloped bottom edge is longer than its straight-line width, so working 29 sc across it doesn’t widen the piece.
Border Round (Cream)
With RS facing, join B with an sc over the top of the magic ring, at the top point. Hanging loop: ch 20, sl st in the same sc.
Side 1 (down the stepped edge):
– Tiers 1–3: work 3 sc evenly along the outer dc post of the end Fan, then 1 sc in that tier’s corner sc. Do this 3 times. (12 sc)
– Tier 4: work 3 sc evenly along the outer dc post, then 3 sc in the Row 8 corner sc. (6 sc)
– Side 1 total: 18 sc, including the 3-sc corner group
Bottom edge (Row 8):
– [5 sc in next ch-5 arch, sc in next center sc] 4 times, 5 sc in the last arch. (25 + 4 = 29 sc)
Side 2 (up the stepped edge):
– 3 sc in the Row 8 corner sc, then 3 sc along the outer dc post of Tier 4. (6 sc)
– Tiers 3–1: 1 sc in the tier’s corner sc, then 3 sc evenly along the outer dc post. Do this 3 times. (12 sc)
– Side 2 total: 18 sc, including the 3-sc corner group
Sl st to the first sc. Fasten off.
Round total: 1 top sc + 18 + 29 + 18 = 66 sc, plus the ch-20 loop.
Why the Math Works
- 5 sc per ch-5 arch is one sc per chain, so the arches neither ruffle nor pull in.
- 3 sc per slanted dc post covers the long, angled side of each fan. Two would gap, and four would ripple.
- 3 sc in each bottom corner turns the sharp corner without cupping. These corner sc are counted inside each side’s 18, not added again.
- Both sides are mirror images (18 sc each), so the tree hangs straight.
The border adds about 0.125 in (0.3 cm) on each edge. That brings the body to 4.75 in (12.1 cm) wide and 4.25 in (10.8 cm) tall.
Trunk
Find the middle arch of Row 8 (arch 3 of 5). Its 5 border sc are the 13th to 17th of the 29 bottom-edge sc.
Row 1: With RS facing, join A with a sl st in the first of those 5 border sc. Ch 1, sc in the same st and in the next 4 sts. (5 sc)
Rows 2–5: Ch 1, turn, sc in each sc across. (5 sc)
Fasten off. The trunk measures 1 in (2.5 cm) wide × 0.75 in (1.9 cm) long, which makes the tree 5 in (12.7 cm) tall overall.
Final Blocking
- Weave in all remaining ends, including the trunk tails.
- Pin the tree flat, RS up, on the blocking mat.
- Pin the top point and the bottom center of the trunk so the tree measures 5 in (12.7 cm) tall.
- Pin the two bottom corners 4.75 in (12.1 cm) apart, making sure they’re level.
- Pin each tier’s corner sc so the sides form straight, matching diagonals.
- Open each inside arch gently with a pin so the windows are even.
- Pin the loop straight up, about 1.25 in (3.2 cm) long.
- Mist the tree until it’s damp, then let it dry completely, about 6 hours.
- For a crisper ornament, use a light spray starch before drying.
Final Quality-Control Checklist
- [ ] Fan counts by tier: 1, 2, 3, 4
- [ ] Each Fan has exactly 7 dc
- [ ] Row 8 has 6 sc and 5 ch-5 arches
- [ ] Border has 66 sc: 1 + 18 + 29 + 18
- [ ] Both sides have the same step shape
- [ ] Trunk is 5 sc wide and centered under arch 3
- [ ] Width 4.75 in (12.1 cm), height 5 in (12.7 cm)
- [ ] Loop is firmly attached at the top point
- [ ] All ends are hidden in the matching color
Troubleshooting
Tiers don’t step outward: You probably worked the cream corner sc into the lavender edge sc. Anchor it in the outer dc of the end Fan instead.
Fans cup or curl: The arches are too tight. Chain more loosely, or go up half a hook size for the cream rows only.
Inside windows look baggy: The chains are too loose. Go down half a hook size for the cream rows.
Bottom edge ruffles: Check that you have exactly 5 sc per arch and not 6.
Trunk is off-center: Count the bottom-edge sc again. The trunk starts at sc 13 of 29.
Tree hangs crooked: The sides have unequal counts. Each side needs 18 sc. Re-pin and block again.
Magic ring loosens: Before weaving in the tail, run it back through the ring once and pull it tight.
Care
Hand wash in cool water, press out the water in a towel, and dry flat with the tree pinned to shape. Store it flat or hang it by the loop, away from direct sunlight so the lavender doesn’t fade.

Final Notes
The measurement chain is simple. One Fan is 1.125 in (2.9 cm) wide, and each tier adds one Fan and about 1 in (2.5 cm) of height. That gives a 4.5 in × 4 in (11.4 cm × 10.2 cm) body after Row 8. The 66-sc border adds 0.125 in (0.3 cm) on each edge, for 4.75 in × 4.25 in (12.1 cm × 10.8 cm). The 0.75 in (1.9 cm) trunk brings the height to 5 in (12.7 cm). If your Row 2 checkpoint matches, the rest will follow. Make one in lavender, then try other color pairs for a whole set of tree ornaments.
Happy crocheting!