Violet Blossom Letter C Keychain Crochet Pattern

This little keychain is a capital letter “C” made of rich violet bobbles, outlined in cream and decorated with three tiny peach flowers. It works well as a bag charm, a monogram gift or a quick stash-buster. It hangs from a gold split ring, so it can be clipped onto a tote, backpack or key set.

The palette is soft but clear: deep purple for the textured letter, cream for the rope-like outline, peach and pale yellow for the flowers, and sage green for the leaves. The bobbles give it a squishy, sculpted look, and the flowers add a cottage-garden feel.

The pattern uses US crochet terms. The finished charm measures about 4 in (10.2 cm) tall and 3.5 in (8.9 cm) wide, not counting the hardware.

Construction overview: You work the letter flat as one curved band in four long rows. Every row adds stitches, so the band bends into a C by itself. Bobbles are made on the wrong-side rows so they pop out on the right side. Two cream border rounds go around the whole shape. Then you make the flowers and leaves separately, sew them on and add the key ring.

Finished Size and Construction

  • Finished size: 4 in (10.2 cm) tall x 3.5 in (8.9 cm) wide
  • Skill level: Advanced beginner / easy intermediate
  • Terminology: US crochet terms
  • Yarn weight: DK (#3) cotton or cotton blend
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 1 letter body, plus 3 flowers and 5 leaves sewn on as decoration
  • Layout: Single piece, no joining
  • Band width (purple only): 1 in (2.5 cm)
  • Size before border: 3.5 in (8.9 cm) tall x 3 in (7.6 cm) wide
  • Border depth: 0.25 in (0.6 cm) on every edge
  • Band width with border: 1.5 in (3.8 cm)

Materials

Smooth DK cotton is best here. It makes crisp bobbles, holds its shape on a keychain and doesn’t pill much. A mercerized cotton gives a slight sheen like the sample. Acrylic DK also works, but the bobbles will be softer and a little less defined.

Yarn (DK cotton, about 2.2 m per gram):

  • Violet purple (main color, MC): 8 g / 18 m
  • Cream (border, CC1): 3 g / 7 m
  • Peach (petals, CC2): 2 g / 5 m
  • Pale yellow (flower centers, CC3): 1 g / 2 m
  • Sage green (leaves, CC4): 1 g / 2 m

These quantities include a margin of about 20% for your gauge swatch, yarn tails and any frogging.

Tools and hardware:

  • 3.5 mm (E-4) crochet hook
  • Tapestry needle
  • 2 stitch markers
  • Scissors
  • Rustproof pins and a small blocking surface
  • 1 gold split key ring, 1 in (2.5 cm) across
  • 1 gold jump ring, about 0.25 in (0.6 cm)
  • 1 short gold chain, 3 links long (about 0.5 in / 1.3 cm)
  • Flat-nose pliers

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • yo – yarn over
  • st(s) – stitch(es)
  • RS / WS – right side / wrong side
  • rev sc – reverse single crochet (crab stitch): work sc from left to right (right-handers), inserting the hook into the next stitch to the right
  • [ ] – repeat the instructions in brackets as many times as stated

Special stitch – Bobble (5-dc bobble): [Yo, insert hook in the stitch, yo and pull up a loop, yo and pull through 2 loops] 5 times, all in the same stitch (6 loops on hook). Yo and pull through all 6 loops. A bobble counts as 1 stitch. You always work bobbles on WS rows, so they bulge toward the RS.

Gauge and Checkpoints

Gauge: 10 sc and 12 sc rows = 2 in (5.1 cm) in DK cotton with a 3.5 mm hook. That works out to 5 sc and 6 rows per 1 in (2.5 cm).

Because this is a single piece, the letter body is your real test. Make it first and check the measurements below before you start the border.

Checkpoints:

  • After Row 1: the strip is 3.6 in (9.1 cm) long (18 sc at 5 sc per inch).
  • After Row 2: the strip is about 0.5 in (1.3 cm) wide and is starting to curve.
  • After Row 4: the outer edge is 8 in (20.3 cm) long (40 sts), the band is 1 in (2.5 cm) wide, and the shape fits in a 3.5 in x 3 in (8.9 cm x 7.6 cm) rectangle.
  • After the border: 4 in x 3.5 in (10.2 cm x 8.9 cm).

Too big? Go down to a 3.25 mm (D-3) hook, or check whether your bobbles are loose and tall. Too small? Go up to a 3.75 mm (F-5) hook. If the C opens too much or curls too tightly, see Troubleshooting. Don’t add or remove stitches, because the curve depends on the counts.

Handmade crochet patches with layered purple and coral flowers on cream canvas bag with gold chain detail.

Letter Body

With MC, ch 19.

Row 1 (RS): Sc in the 2nd ch from hook and in each ch across. Turn. (18 sc)

This row becomes the inner edge of the C. Put a marker on the RS.

Row 2 (WS, bobble row): Ch 1 (does not count as a st here or in later rows). Sc in the first st, [bobble in next st, 2 sc in next st, sc in next st] 5 times, bobble in next st, 2 sc in last st. Turn. (24 sts: 6 bobbles + 18 sc)

Check: you worked into 1 + 15 + 2 = 18 sts and made 1 + 20 + 3 = 24 sts. Push each bobble toward the RS with your finger.

Row 3 (RS, increase row): Ch 1, [sc in next 2 sts, 2 sc in next st] 8 times. Turn. (32 sc)

Work the sc into the top of each bobble just as you would any other stitch. Check: 24 sts worked into, 8 increases, total 32.

Row 4 (WS, outer bobble row): Ch 1, sc in the first st, 2 sc in next st, bobble in next st, sc in next st, [bobble in next st, 2 sc in next st, bobble in next st, sc in next st] 7 times. (40 sts: 15 bobbles + 25 sc)

Check: you worked into 4 + 28 = 32 sts and made 5 + 35 = 40 sts. That’s 8 increases. Fasten off MC and weave in the tails on the WS.

This row forms the outer edge of the C. The bobbles here are spaced closer together than in Row 2, which gives the dense outer bobble line you see in the finished piece.

Why it curves: The inner edge has 18 sts (3.6 in / 9.1 cm) and the outer edge has 40 sts (8 in / 20.3 cm). That’s a difference of 4.4 in (11.2 cm) across a band 1 in (2.5 cm) wide. A difference that size bends the strip through roughly 250 degrees, which is the open C shape. Lay the piece RS up and gently ease it into a C before you start the border.

Flowers (make 3)

Center: With CC3, make a magic ring. Ch 1, work 5 sc in the ring. Pull the ring closed and sl st to the first sc. Fasten off. (5 sc)

Petals: With RS facing, join CC2 with a sl st in any sc. [(Sc, hdc, dc, hdc, sc) all in the next st] 5 times. Sl st to the first sc and fasten off, leaving a 10 in (25.4 cm) tail for sewing. (5 petals, 25 sts)

Each flower is about 1 in (2.5 cm) across. Pull the yellow center tight so only a small yellow dot shows.

Leaves (make 5)

With CC4, ch 6.

Leaf: Sl st in the 2nd ch from hook, sc in next ch, hdc in next ch, sc in next ch, sl st in last ch. Ch 1 for the tip. Working along the other side of the foundation chain: sl st in the first ch, sc in next ch, hdc in next ch, sc in next ch, sl st in last ch. Fasten off, leaving an 8 in (20.3 cm) tail. (10 sts + tip ch)

Each leaf is about 0.75 in (1.9 cm) long and comes to a point at both ends.

Border

Border gauge: The border uses the same 5 sc per 1 in (2.5 cm). Two rounds add 0.25 in (0.6 cm) to every edge. That makes the 3.5 in x 3 in (8.9 cm x 7.6 cm) body into a 4 in x 3.5 in (10.2 cm x 8.9 cm) charm.

The C has four “sides”:

  • Outer edge: the top of Row 4
  • End: the row ends of one tip
  • Inner edge: the underside of the foundation chain
  • Other end: the row ends of the second tip

Each side’s count below includes its own 3-sc corner groups, so no corner stitch is counted twice.

Round 1 (RS): With RS facing, join CC1 with a standing sc in the first st of Row 4. Work 2 more sc in that same st to finish the first corner.

  • Outer edge: Sc in each of the next 38 sts, then 3 sc in the last st. (44 sc: 3 + 38 + 3)
  • End: Work down the row ends: 2 sc in the end of Row 4, 1 sc in the end of Row 3, 2 sc in the end of Row 2, 1 sc in the end of Row 1. (6 sc)
  • Inner edge: Working in the underside of the foundation chain, 3 sc in the first ch, sc in each of the next 16 ch, 3 sc in the last ch. (22 sc: 3 + 16 + 3)
  • Other end: Work up the row ends: 1 sc in Row 1, 2 sc in Row 2, 1 sc in Row 3, 2 sc in Row 4. (6 sc)
  • Sl st to the first sc.

Round 1 total: 78 sc (44 + 6 + 22 + 6)

Round 2 (RS): Ch 1. Do not turn. Rev sc in each st around. Sl st to the first rev sc and fasten off. (78 rev sc)

This makes the twisted, rope-like cream edge.

Why the math works:

  • Outer edge: It has 40 stitches over 8 in (20.3 cm), which already matches gauge. So 1 sc per stitch, plus 2 extra in each corner group, lies flat.
  • Inner edge: It has 18 chains over 3.6 in (9.1 cm), so 1 sc per chain matches gauge. The corner groups round off the tips.
  • Ends: Each end is 1 in (2.5 cm) of row ends. The bobble rows are about twice as tall as the sc rows, which is why they get 2 sc each. That gives 6 sc per end. Combined with the corner groups, this lets the tips curve softly without ruffling.
  • Round 2: Rev sc goes 1-for-1 into Round 1, so it adds depth but no extra length.

Assembly

  1. Placement: Lay the bordered C RS up. Imagine a clock face over the letter and pin the flowers:
  2. Flower 1 at about 11 o’clock, near the top of the curve
  3. Flower 2 at about 9 o’clock, on the outer left edge
  4. Flower 3 at about 7 o’clock, near the bottom

Each flower should overlap the cream border by about 0.125 in (0.3 cm).
2. Leaves: Tuck the leaves partly under the petals:
– Flower 1: two leaves, one to the right and one lower left
– Flower 2: one leaf below
– Flower 3: one leaf to the left and one lower right
3. Sewing: Using the tails, sew each flower down with small stitches through the center ring and the base of each petal. Leave the petal tips free. Sew each leaf down along its center line. Hide all tails on the WS.
4. Hardware: With pliers, open the jump ring and thread it through both border rounds at about 12 o’clock, just to the right of Flower 1. Add the 3-link chain and close the ring. Attach the split ring to the top link of the chain. The total hanging length is about 2 in (5.1 cm).

Final Blocking

  1. Wet-block the letter body before you attach the hardware if you can. If not, keep the metal parts dry.
  2. Mist the piece lightly with water. Don’t soak cotton bobbles, or they may flatten.
  3. Pin the C on a blocking surface to 4 in (10.2 cm) tall and 3.5 in (8.9 cm) wide. Keep the band an even 1.5 in (3.8 cm) wide all around.
  4. Pin the cream edge every 0.5 in (1.3 cm) and keep the two tips level with each other.
  5. Pinch each bobble from the RS to round it out again.
  6. Don’t pin through the flowers. Fluff the petals by hand.
  7. Leave it to dry completely, which takes 6 to 12 hours.

Final Quality-Control Checklist

  • [ ] Row stitch counts: 18 / 24 / 32 / 40
  • [ ] 21 bobbles in total (6 inner, 15 outer), all on the RS
  • [ ] Round 1 has 78 sc: 44 / 6 / 22 / 6
  • [ ] Round 2 has 78 rev sc and forms an even rope edge
  • [ ] Finished size is 4 in x 3.5 in (10.2 cm x 8.9 cm)
  • [ ] Three flowers at 11, 9 and 7 o’clock, with five leaves placed
  • [ ] Jump ring fully closed with no gap for the chain to slip through
  • [ ] All tails woven in and hidden on the WS

Troubleshooting

  • Bobbles show on the wrong side: You made them on a RS row. Bobbles belong only on Rows 2 and 4, with the WS facing you.
  • The C is too open, like a shallow arc: Your outer rows are too loose. Tighten your tension on Rows 3 and 4, or go down half a hook size for those rows.
  • The C curls into a full ring: Your foundation chain is too tight. Chain with a hook one size larger, then switch back.
  • Border ruffles at the tips: Work 1 sc in each bobble row end instead of 2. Then you’ll have 4 sc per end and 74 sts in Round 1.
  • Border cups or pulls inward: Add 1 extra sc on the outer edge near the middle and check that your rev sc isn’t tight.
  • Flower petals curl forward: Steam them lightly and press flat with your fingers.
  • Gaps between rev sc: Insert your hook under both loops and keep a relaxed tension.

Care

Hand wash in cool water with mild soap, press out the water in a towel and dry flat. Take off the metal key ring first so it doesn’t tarnish or snag the yarn.

Beige tote bag with purple crocheted 'C' charm decorated with pink flowers and green leaves, displayed on wooden garden fence.

Final Notes

The whole charm comes from one measurement chain:

  1. Gauge: 5 sc = 1 in (2.5 cm).
  2. Inner edge: 18 sc, or 3.6 in (9.1 cm).
  3. Outer edge: 40 sts, or 8 in (20.3 cm). The difference bends the 1 in (2.5 cm) band into a C measuring 3.5 in x 3 in (8.9 cm x 7.6 cm).
  4. Border: two rounds of 78 sts add 0.25 in (0.6 cm) on every side, for 4 in x 3.5 in (10.2 cm x 8.9 cm).

Check each step, and your C will match the sample. For other letters, use the same bobble rows and border logic, but rework the counts for that letter’s shape.

Happy crocheting!

Leave a Comment