This hanging organizer holds three spare toilet rolls in a column of round baskets. Each basket has a cream base and band, a lacy turquoise fan section, and a rolled cream rim. Two cream straps run up the sides and meet in a triangle that hangs from a peg or hook.
The colors are cream and turquoise, so it suits a beachy or Scandinavian bathroom. Cotton yarn and firm single crochet keep the baskets sturdy enough to hold their shape when loaded.
This pattern uses US crochet terms. Each basket measures 5.75 in (14.6 cm) across and 3.25 in (8.3 cm) tall. Hung up, the whole holder is about 22.25 in (56.5 cm) from the top of the triangle to the bottom of the lowest basket.
Construction is simple. You crochet a flat base, then work the wall straight up from it in joined rounds. You make three baskets and two straps, sew the straps to the sides of the baskets, and join the strap tips together.
Finished Size and Construction
- Basket size: 5.75 in (14.6 cm) diameter x 3.25 in (8.3 cm) tall
- Overall hanging length: about 22.25 in (56.5 cm)
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: Worsted (#4), 100% cotton
- Hook: 4.0 mm (G/6)
- Number of pieces: 5 (3 baskets, 2 straps)
- Layout: 3 baskets stacked vertically, with a 2.75 in (7.0 cm) gap between baskets
- Base size: 5.75 in (14.6 cm) diameter, 72 stitches
- Basket height before rim: 2.6 in (6.6 cm)
- Rim depth: 0.65 in (1.7 cm), 3 rounds
- Strap size: 23 in (58.4 cm) long x 0.6 in (1.5 cm) wide
Materials
Use a smooth worsted-weight 100% cotton. Cotton holds its shape, doesn’t stretch much under weight, and shows the fan spokes clearly. Avoid acrylic: the baskets will sag.
- Color A, cream: 230 g / 355 m (about 388 yd)
- Color B, turquoise: 80 g / 123 m (about 135 yd)
Quantities assume about 1.54 m per gram, which is typical for worsted cotton. They include a margin of roughly 15% for swatching and weaving in ends.
Tools:
– 4.0 mm (G/6) crochet hook
– Tapestry needle
– 8 stitch markers
– Measuring tape
– Scissors
– A can or jar about 5.75 in (14.6 cm) across, for blocking
– Wall peg or hook
Abbreviations (US Terms)
- ch – chain
- sc – single crochet
- dc – double crochet
- sl st – slip stitch
- inc – 2 sc in the same stitch
- BLO – back loop only
- fsc – foundation single crochet
- rev sc – reverse single crochet (crab stitch)
- st(s) – stitch(es)
- rep – repeat
- sk – skip
Special stitches
Fan: 7 dc worked into one stitch.
Reverse sc: Work from left to right (right to left if you’re left-handed). Insert the hook into the next stitch to the right, yarn over, and pull up a loop. Yarn over and pull through both loops. This makes the rolled, cord-like rim.
Gauge and Checkpoints
Gauge: 16 sc and 17 rounds = 4 in (10.2 cm) in sc. That works out to 4 sts per inch.
Before making all five pieces, make one complete basket first. It is your real gauge test.
Checkpoints:
– After Round 4 (24 sts), the base measures 1.9 in (4.8 cm) across.
– After Round 8 (48 sts), it measures 3.8 in (9.7 cm).
– After Round 12 (72 sts), it measures 5.75 in (14.6 cm). The circumference is 18 in (45.7 cm).
– After Round 16, the wall stands 1 in (2.5 cm) tall.
– After Round 19, the wall stands 2.6 in (6.6 cm) tall.
– After Round 22, the finished basket is 3.25 in (8.3 cm) tall.
If your base is too big, go down 0.5 mm in hook size. If it is too small, go up 0.5 mm. Don’t add or remove rounds. The 72-stitch count must stay the same, because the fan repeat depends on it.
If your base ruffles, your tension is too loose for the increases. If it cups, your tension is too tight. Change hook size before going on.

Basket (Make 3)
All rounds are joined with a sl st to the first sc. Ch 1 at the start of a round does not count as a stitch.
Base (Color A)
Round 1: Make a magic ring. Ch 1, 6 sc in the ring, join. (6 sts)
Round 2: Ch 1, inc in each st around, join. (12 sts)
Round 3: Ch 1, sc 1, inc; rep from * 6 times, join. (18 sts)
Round 4: Ch 1, sc 1, inc, sc 2, inc; rep from * 4 more times, sc 1, join. (24 sts)
Round 5: Ch 1, sc 3, inc; rep from * 6 times, join. (30 sts)
Round 6: Ch 1, sc 2, inc, sc 4, inc; rep from * 4 more times, sc 2, join. (36 sts)
Round 7: Ch 1, sc 5, inc; rep from * 6 times, join. (42 sts)
Round 8: Ch 1, sc 3, inc, sc 6, inc; rep from * 4 more times, sc 3, join. (48 sts)
Round 9: Ch 1, sc 7, inc; rep from * 6 times, join. (54 sts)
Round 10: Ch 1, sc 4, inc, sc 8, inc; rep from * 4 more times, sc 4, join. (60 sts)
Round 11: Ch 1, sc 9, inc; rep from * 6 times, join. (66 sts)
Round 12: Ch 1, sc 5, inc, sc 10, inc; rep from * 4 more times, sc 5, join. (72 sts)
Moving the increases on every other round keeps the circle round instead of hexagonal. Check the base against the 5.75 in (14.6 cm) checkpoint.
Wall, Lower Band (Color A)
Round 13: Ch 1, sc in BLO of each st around, join. (72 sts)
The unused front loops form a neat ridge where the base turns up into the wall.
Rounds 14–16: Ch 1, sc in each st around, join. (72 sts in each round)
Fasten off Color A.
Fan Section (Color B)
Round 17: Join Color B in any st. Ch 1, sc in the same st, sk 2 sts, fan in next st, sk 2 sts, sc in next st; rep from * 10 more times. Then sk 2 sts, fan in next st, sk 2 sts, and join to the first sc. (12 fans + 12 sc = 96 sts)
Each 6-st repeat uses 1 sc, 2 skipped sts, 1 fan st, and 2 skipped sts, so 72 ÷ 6 = 12 fans exactly.
Round 18 (offset fans): Sl st in the next 4 dc to reach the center dc of the first fan. Ch 1, sc in the same st, fan in the next sc, sc in the center dc of the next fan; rep from * 10 more times. Then fan in the last sc and join to the first sc. (12 fans + 12 sc = 96 sts)
The new fans sit above the sc points of Round 17. That offset creates the overlapping-scallop look.
Round 19 (arches): Sl st in the next 4 dc to reach the center dc of the first fan. Ch 1, sc in the same st, ch 5, sc in the center dc of the next fan; rep from * 10 more times. Then ch 5 and join to the first sc. (12 sc + 12 ch-5 arches)
Fasten off Color B. The wall now measures 2.6 in (6.6 cm).
Rim (Color A)
The rim rounds are written out under Border below, because they set the basket’s final circumference. Work them now on each basket, then come back here.
Straps (Make 2)
With Color A:
Row 1: Fsc 92. (92 sts)
Row 2: Ch 1, turn, sc in each st across. (92 sts)
Row 3: Ch 1, turn, sl st loosely in each st across. (92 sts)
Fasten off and leave a long tail. At 4 sts per inch, 92 sts = 23 in (58.4 cm). The strap is 0.6 in (1.5 cm) wide.
The fsc foundation stretches the same way as the sc rows. A plain foundation chain would pull the strap shorter.
Make All Pieces
- Color A: 3 bases, 3 lower bands, 3 rims, and 2 straps
- Color B: 3 fan sections (Rounds 17–19 of each basket)
Layout (front view):
/\ <- strap tips joined (1 in / 2.5 cm overlap)
/ \ <- free strap legs, 6.75 in (17.1 cm) each
|[ BASKET 3 ]| <- strap sts 49–61
| | <- gap, strap sts 38–48
|[ BASKET 2 ]| <- strap sts 25–37
| | <- gap, strap sts 14–24
|[ BASKET 1 ]| <- strap sts 1–13
Joining
Method: Whipstitch the straps to the outside of the basket walls with Color A. Sew only through the solid cream areas: Rounds 13–16 and Rounds 20–22. Don’t sew into the lace, which would stretch.
Placing the straps: On each basket, count the 72 rim sts with the join seam as st 1. Mark st 19 and st 55. They are exactly 36 sts apart, which puts them directly opposite each other. The seam ends up at the back, centered between the straps.
Stitch-to-stitch logic: Each basket is 3.25 in (8.3 cm) tall, which equals 13 strap stitches. Each gap is 2.75 in (7.0 cm), which equals 11 strap stitches.
- Strap sts 1–13: Basket 1 (bottom)
- Sts 14–24: gap
- Sts 25–37: Basket 2
- Sts 38–48: gap
- Sts 49–61: Basket 3 (top)
- Sts 62–92: leg, 31 sts = 7.75 in (19.7 cm)
Check: 13 + 11 + 13 + 11 + 13 = 61, and 92 − 61 = 31.
Line up strap st 1 with the bottom edge of the basket at the marker. Sew from the base ridge to the top of Round 16, then from Round 20 to the rim. Repeat on the other side, then on the other two baskets.
Joining the tips: Overlap the last 4 sts (sts 89–92) of the two straps. That overlap is 1 in (2.5 cm). Sew through both layers around all four sides. Each free leg is now 27 sts, or 6.75 in (17.1 cm).
Tension: Make whipstitches snug but not tight. If they are too tight, the wall will dimple under the strap.
Size checkpoint: Lay the holder flat. From the bottom of Basket 1 to the top of Basket 3 should measure 15.25 in (38.7 cm). The total length to the top of the triangle should be about 22.25 in (56.5 cm).
Border
The border is the rim of each basket. Its gauge is the same as the body: 4 sc per inch.
Round 20 (conversion round, Color A): Join Color A in any sc. Ch 1, sc in each sc, and work 5 sc in each ch-5 arch. Join.
Count: (12 sc worked 1-per-existing-stitch) + (60 sc added, 5 per arch) = 72 sts.
Round 21: Ch 1, sc in each st around, join. (72 sts)
Round 22: Ch 1, rev sc in each st around, join. (72 sts) Fasten off.
Counts per quarter: Each quarter of the rim, between strap markers and the front and back centers, has 18 sts. 18 x 4 = 72.
Why the math works: The rim has the same 72 stitches as the base, so the circumference stays 18 in (45.7 cm) from bottom to top. That keeps the wall straight instead of flared or pulled in.
The 12 arches turn back into 72 stitches because each arch covers one 6-st repeat (1 sc + 5 ch). Working 5 sc per arch restores exactly 6 sts per repeat. The rim adds 0.65 in (1.7 cm), which brings the basket from 2.6 in (6.6 cm) to 3.25 in (8.3 cm).
Final Blocking
- Weave in all ends before blocking. Hide the turquoise tails inside the cream bands.
- Lightly spray each basket with water until damp, not soaked.
- Slide each basket over a can or jar about 5.75 in (14.6 cm) across.
- Push the base ridge flat against the can’s bottom. Pull the fans gently upward so the spokes line up.
- Shape the rev sc rim into an even roll with your fingers.
- Pin the straps flat and straight on a towel.
- Let everything dry completely, about 12–24 hours.
- If you blocked before joining, measure again and then sew the pieces together.
Final Quality-Control Checklist
- Each base measures 5.75 in (14.6 cm) and lies flat.
- Every basket has 72 sts in Rounds 12–16 and 20–22.
- Each fan round has 12 fans, and the fans are offset between Rounds 17 and 18.
- Each basket is 3.25 in (8.3 cm) tall.
- Each strap has 92 sts and measures 23 in (58.4 cm).
- The straps sit directly opposite each other at sts 19 and 55.
- The gaps between baskets are 2.75 in (7.0 cm), and the baskets hang level.
- The tips overlap by 1 in (2.5 cm) and are sewn through all layers.
- All ends are woven in and none show from the front.
Troubleshooting
Base cups upward: Your tension is too tight. Go up a hook size, or make your increases looser.
Base ruffles: Your tension is too loose. Go down a hook size.
Fans don’t fit evenly: Your Round 16 count is off. Recount to 72 sts before Round 17.
Wall flares out at the fans: Tighten your dc a little, or crochet Round 19’s ch-5 arches more firmly.
Baskets tilt: The straps aren’t exactly opposite each other. Count again from the seam and re-sew.
Holder hangs too long: Your strap gauge is loose. Remake the straps on a smaller hook so 92 sts = 23 in (58.4 cm).
Rim twists: Work rev sc slowly, and don’t skip any stitches. Recount to 72.
Care
Hand wash in cool water with mild soap, press out the water, and reshape over a can to dry. Don’t tumble dry, because cotton can shrink and the baskets may lose their shape.

Final Notes
The whole design depends on one number: 72 stitches at 4 sts per inch. That gives a base of 5.75 in (14.6 cm). A wall of 72 stitches keeps the circumference at 18 in (45.7 cm). Twelve 6-st repeats give 12 fans, and the rim converts back to 72. Each basket finishes at 3.25 in (8.3 cm) tall.
Straps of 92 sts at the same gauge measure 23 in (58.4 cm). That covers three baskets, two 2.75 in (7.0 cm) gaps, and two hanging legs. Check gauge on your first basket and every other measurement will follow.
Happy crocheting!