The Tulip Tier holder is a three-basket hanging organizer that holds three standard rolls of toilet paper. Each basket has a solid cream base, a row of coral tulips with sage-green leaves, an airy mesh band and a scalloped fan rim. Two cream straps run up the sides and meet in a simple triangle that hangs from a wall peg or hook.
The colors are cream, coral and sage green. Together they give the holder a soft cottage-garden look that suits a bright bathroom. The pattern uses US crochet terms throughout.
Each basket measures about 5.75 in (14.6 cm) across and 3.75 in (9.5 cm) tall at the scallop peaks. The assembled holder hangs about 19 in (48.3 cm) from the lowest base to the top of the strap triangle.
You make eight pieces: three bases, three walls and two straps. Each wall is worked in the round from a foundation single crochet edge, then joined to its base with a single crochet seam and finished with a crab-stitch rim. The straps are sewn to the outside of each basket last.
Finished Size and Construction
- Basket size: 5.75 in (14.6 cm) diameter × 3.75 in (9.5 cm) tall at the peaks, 3 in (7.6 cm) tall at the valleys
- Hanging height: about 19 in (48.3 cm)
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Medium #4 (worsted) cotton
- Hook: 5.0 mm (H-8)
- Number of pieces: 8 (3 bases, 3 walls, 2 straps)
- Layout: 3 baskets stacked vertically with 2.5 in (6.4 cm) gaps between them
- Base size: 5.75 in (14.6 cm), which is 72 stitches around
- Wall height before the rim: 3.5 in (8.9 cm) at the peaks
- Rim depth: 0.25 in (0.6 cm)
Materials
Use a smooth, firm worsted-weight cotton or cotton blend. Cotton holds the basket shape well and takes the steam in a bathroom without stretching out.
- Color A, Cream: 250 g / 390 m
- Color B, Coral: 30 g / 47 m
- Color C, Sage Green: 40 g / 62 m
The quantities include a margin of about 15% for swatching and joining.
Tools:
– 5.0 mm (H-8) crochet hook
– Tapestry needle
– 8 locking stitch markers
– Rust-proof pins
– Blocking mat
– Spray bottle
– Measuring tape
– Scissors
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- fsc: foundation single crochet
- BLO: back loop only
- rev sc: reverse single crochet (crab stitch)
- sk: skip
- sp: space
- st(s): stitch(es)
Bobble (Tulip): Yarn over, insert the hook in the stitch, pull up a loop, yarn over and pull through 2 loops. Repeat 4 more times in the same stitch (6 loops on the hook). Yarn over and pull through all 6 loops. A bobble counts as 1 stitch.
Fan: Work (dc, ch 1) 4 times and then 1 dc, all in the same stitch. A fan has 5 dc and 4 ch-1 spaces.
Gauge and Checkpoints
Gauge: 16 sc and 18 rounds = 4 in (10.2 cm), worked firmly.
Test one base first, because it is your gauge swatch. Check these measurements as you go:
- After base Round 4 (24 sts): about 2 in (5.1 cm) across
- After base Round 8 (48 sts): about 3.75 in (9.5 cm) across
- After base Round 12 (72 sts): 5.75 in (14.6 cm) across
If the base is too big, go down 0.5 mm in hook size. If it is too small, go up 0.5 mm. Don’t add or remove rounds, because the wall depends on the base having exactly 72 stitches.
Wall checkpoints:
- The fsc ring lies flat at 18 in (45.7 cm) around, or 9 in (22.9 cm) wide when folded flat.
- About 1.1 in (2.8 cm) tall after Round 5
- About 1.75 in (4.4 cm) tall after Round 7
- About 2.5 in (6.4 cm) tall after Round 9

Base (Make 3)
Use Color A. The base is worked in a continuous spiral, so mark the first stitch of each round.
- Rnd 1: 6 sc in a magic ring. (6)
- Rnd 2: 2 sc in each st. (12)
- Rnd 3: (sc in next st, 2 sc in next st) 6 times. (18)
- Rnd 4: (sc in next 2 sts, 2 sc in next st) 6 times. (24)
- Rnd 5: (sc in next 3 sts, 2 sc in next st) 6 times. (30)
- Rnd 6: (sc in next 4 sts, 2 sc in next st) 6 times. (36)
- Rnd 7: (sc in next 5 sts, 2 sc in next st) 6 times. (42)
- Rnd 8: (sc in next 6 sts, 2 sc in next st) 6 times. (48)
- Rnd 9: (sc in next 7 sts, 2 sc in next st) 6 times. (54)
- Rnd 10: (sc in next 8 sts, 2 sc in next st) 6 times. (60)
- Rnd 11: (sc in next 9 sts, 2 sc in next st) 6 times. (66)
- Rnd 12: (sc in next 10 sts, 2 sc in next st) 6 times. (72)
- Rnd 13 (ridge round): sc in BLO of each st, then sl st to the first st to join. (72 sts: 72 worked one per stitch + 0 added)
This BLO round turns the edge up slightly and makes the raised ridge. Fasten off, leaving a 6 in (15.2 cm) tail.
Wall (Make 3)
Each round has 8 repeats of 9 stitches (72). Each repeat holds one tulip. Join every round with a sl st, ch 1 and start in the same stitch, so the repeats stay stacked.
Rnd 1 (A): Fsc 72 and join into a ring without twisting it. (72)
Rnds 2–4 (A): ch 1, sc in each st, join. (72)
Change to C at the end of Round 4.
Rnd 5 (C): ch 1, sc in each st, join. (72)
Rnd 6 (C, leaves): ch 1, sc in next 2 sts, hdc in next st, dc in next st, sc in next st (the stem), dc in next st, hdc in next st, sc in next 2 sts. Repeat from * 7 more times, then join. (72 sts: 8 repeats × 9)
The two dc in each repeat stand up as leaves on either side of the green stem stitch. Fasten off C.
Rnd 7 (A and B, tulips): Join A. ch 1, sc in next 4 sts with A, change to B and work a Bobble in the next st (directly above the stem), change to A, sc in next 4 sts. Repeat from * 7 more times, then join. (72 sts: 64 sc + 8 bobbles)
Carry the unused color loosely inside the wall. Push each bobble to the outside.
Rnd 8 (A, mesh): ch 4 (counts as dc + ch 1), sk next st, dc in next st, ch 1. Repeat from * around, ending with sk last st, and join to the 3rd ch of the starting ch-4. (72 sts: 36 dc + 36 ch-1 sps)
A dc falls directly above each tulip.
Rnd 9 (A): ch 1, sc in each dc and in each ch-1 sp, then join. (72 sts: 36 sc in dc + 36 sc in sps)
Rnd 10 (A, fans): ch 1, sc in next st, sk 3 sts, Fan in next st, sk 3 sts, sc in next st. Repeat from * 7 more times, then join. (8 fans: 56 sts + 32 ch-1 sps)
Each fan sits right above a tulip. Each valley has 2 sc, which fall above the gap between two tulips.
Rnd 11 (A, scallop): ch 1, sc in sc, sc in 1st dc of fan, hdc in ch-1 sp, hdc in 2nd dc, dc in ch-1 sp, (dc, ch 2, dc) in 3rd dc, dc in ch-1 sp, hdc in 4th dc, hdc in ch-1 sp, sc in 5th dc, sc in sc. Repeat from * 7 more times, then join. (96 sts + 8 ch-2 peaks, or 12 sts + 1 peak per repeat)
The graded stitch heights make the wavy scalloped shape.
Coral dots: With B and a tapestry needle, make one small straight stitch over the Round 8 ch-1 space centered between each pair of tulips. That makes 8 dots per wall.
Make All Pieces
- Color A only: 3 bases and 2 straps (see below)
- Colors A, B and C: 3 walls
Strap (Make 2, Color A):
- Row 1: Fsc 82. This is 20.5 in (52.1 cm).
- Rows 2–3: ch 1, turn, sc in each st. (82)
- Edging: Work sl st evenly around the whole strip for a firm, rope-like edge.
The strap ends up about 0.75 in (1.9 cm) wide.
Layout (top to bottom):
/\ strap triangle, 6 in (15.2 cm) arms
/ \
| [ 1 ] | top basket, 3 in (7.6 cm) at valleys
| | gap 2.5 in (6.4 cm)
| [ 2 ] | middle basket
| | gap 2.5 in (6.4 cm)
| [ 3 ] | bottom basket
Joining
Base to wall: Place a wall on a base with the wrong sides together, so the fsc edge sits on the Round 13 ridge. With A, work 1 sc through both layers in each stitch: one wall stitch to one base stitch. (72)
Keep the tension even. A tight seam cups the base inward, and a loose seam flares the wall. Check that the joined basket still measures 5.75 in (14.6 cm) across, then fasten off.
Straps to baskets: On each basket, place markers at two opposite valleys: the gap before repeat 1 and the gap before repeat 5. These are exactly 36 stitches apart.
- Pin the end of a strap level with the base seam of the bottom basket, centered on a marker.
- Run the strap straight up, 3 in (7.6 cm) along the wall, to the valley rim.
- Leave a 2.5 in (6.4 cm) gap, then pin the strap to the middle basket the same way. Repeat for the top basket.
- Whipstitch both long edges of the strap to the wall exterior.
This uses 14 in (35.6 cm) of each strap, leaving a 6.5 in (16.5 cm) arm above the top basket. Overlap the two arms by 0.5 in (1.3 cm) and stitch them together firmly. Each finished arm is 6 in (15.2 cm), and the triangle stands about 5.25 in (13.3 cm) tall.
Border
Rim gauge: 4 rev sc = 1 in (2.5 cm) along the rim.
Work this rim on each wall after joining it to its base.
Rnd 12 (A, crab-stitch rim): Join A at any valley. ch 1, work rev sc in each st and 3 rev sc in each ch-2 peak, then join. (120 sts)
Count per repeat: 12 sts from Round 11 + 3 at the peak = 15. Then 15 × 8 repeats = 120.
Why the math works: Round 11 has 96 sts (8 × 12), plus 3 extra stitches at each of the 8 peaks (24), which gives 120. The peak needs the extra stitches to wrap around the point without pulling it flat, while the straight sides take exactly 1 rev sc per stitch so they don’t ruffle. The rim adds 0.25 in (0.6 cm). That brings the wall to 3.75 in (9.5 cm) at the peaks and 3 in (7.6 cm) at the valleys.
Final Blocking
- Weave in all ends inside the walls and along the bases.
- Lightly spray each basket until it is damp.
- Stuff each basket with a toilet roll wrapped in a towel, so the wall dries upright.
- Pin out each scallop peak so the 8 points match.
- Flatten the bases with your palm. Check that each is 5.75 in (14.6 cm) across.
- Lay the straps flat and pin the triangle arms straight at 6 in (15.2 cm).
- Let everything dry completely before hanging.
Final Quality-Control Checklist
- Each base has 72 sts and measures 5.75 in (14.6 cm).
- Each wall has 8 tulips, each sitting above a green stem.
- Every fan is centered above its tulip.
- There are 8 coral dots, one between each pair of tulips.
- Each rim has 120 rev sc and 8 even peaks.
- The straps are fixed at opposite valleys, 36 sts apart.
- Both gaps between baskets measure 2.5 in (6.4 cm).
- The holder hangs straight and doesn’t twist.
Troubleshooting
- The base cups or ruffles: Check the stitch count. A cupped base is usually too tight, so go up a hook size. A ruffled base usually means you made too many increases.
- The fans drift away from the tulips: You likely missed a stitch in Round 8 or 9. Count to 72 before starting the fans.
- The bobbles sink inward: Push them out and pull the carried yarn a little tighter.
- The scallops lie flat: Tighten the dc in Round 11. You can also block with more pins at the peaks.
- The baskets tilt: Re-pin the straps so both sit exactly at the opposite markers.
- The gaps differ in height: Measure both gaps again from rim valley to base seam.
Care
Hand wash in cool water with mild soap, press out the water in a towel and dry flat. Reshape the scallops while the holder is still damp.

Final Notes
The measurement chain runs like this:
- 16 sc = 4 in (10.2 cm) gives a 72-stitch base of 5.75 in (14.6 cm).
- The 72-stitch wall joins to that base stitch for stitch.
- Eight 9-stitch repeats line up tulips, fans and scallops.
- A 120-stitch rim finishes each basket at 3.75 in (9.5 cm).
- Two 20.5 in (52.1 cm) straps stack the three baskets into a 19 in (48.3 cm) hanger.
Check each link in that chain and the holder will come together cleanly.
Happy crocheting!