This hanging holder stacks three round baskets on a pair of cream straps. It holds three standard rolls and hangs from a single wall peg or hook. Each basket has a solid cream base, a cream band at the bottom of the wall, an airy lavender mesh in the middle, and a thick cream rim at the top.
The front and back of each basket have a cream fan appliqué, and two cream V-lines run from the rim down to the fan. The colors are soft and calm, so the holder suits a cottage-style or modern bathroom.
This pattern uses US crochet terms. Each basket measures 6 in (15.2 cm) across and 3.5 in (8.9 cm) tall. The assembled holder measures about 6 in (15.2 cm) wide and 21.5 in (54.6 cm) from the bottom of the lowest basket to the hanging peak.
For each basket, you crochet the base and wall in one piece, working in the round from the center out and then straight up. Next you add the rim, sew on two fans, and work the V-lines on the surface. Finally, you sew two straps up the sides and join their ends at the top.
Finished Size and Construction
- Finished size: 6 in (15.2 cm) wide × 21.5 in (54.6 cm) tall
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: Medium / worsted (#4), cotton or cotton blend
- Hook: 5.0 mm (H-8)
- Number of pieces: 11 (3 baskets, 6 fans, 2 straps)
- Layout: 3 baskets stacked vertically, with a 1.5 in (3.8 cm) gap between tiers
- Piece size: each basket is 6 in (15.2 cm) across × 3.5 in (8.9 cm) tall
- Size before border: the wall is 2.75 in (7.0 cm) tall before the rim
- Border depth: the rim adds 0.75 in (1.9 cm)
Materials
Use a smooth, firm cotton yarn. Cotton keeps the baskets upright and holds up well to bathroom humidity. Avoid fuzzy acrylic, because it blurs the mesh.
- Cream (Color A): 150 g / about 285 m
- Lavender (Color B): 50 g / about 95 m
All quantities include a margin of about 15%.
Tools:
– 5.0 mm (H-8) crochet hook
– Tapestry needle
– 4 locking stitch markers
– Rust-proof pins
– Measuring tape
– Scissors
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- inc – 2 sc in the same stitch
- BLO – back loop only
- rev sc – reverse single crochet (crab stitch)
- sp – space
- st(s) – stitch(es)
- MR – magic ring
Special stitch – V-stitch (V-st): (dc, ch 1, dc) in the same stitch or space.
Gauge and Checkpoints
Gauge: 14 sc and 15 rounds = 4 in (10.2 cm). In V-st mesh, 4 rounds = 2 in (5.1 cm).
Make one complete basket before you start the other two, and check these measurements:
- After Rnd 6, the base measures 3.25 in (8.3 cm) across.
- After Rnd 11, the base measures 6 in (15.2 cm) across.
- After Rnd 14, the cream wall band is 0.75 in (1.9 cm) tall.
- After Rnd 18, the wall is 2.75 in (7.0 cm) tall.
- After Rnd 21, the wall is 3.5 in (8.9 cm) tall.
If your basket is too big, go down to a 4.5 mm hook. If it is too small, go up to a 5.5 mm hook. A standard roll is about 4.5 in (11.4 cm) wide, so the basket must be at least 5.5 in (14.0 cm) across.

Basket (make 3)
Base
Use Color A. Work in continuous rounds without joining, and move a marker to the first stitch of each round.
Rnd 1: 6 sc in MR. (6)
Rnd 2: Inc in each st around. (12)
Rnd 3: Sc 1, inc; repeat 6 times. (18)
Rnd 4: Sc 2, inc; repeat 6 times. (24)
Rnd 5: Sc 3, inc; repeat 6 times. (30)
Rnd 6: Sc 4, inc; repeat 6 times. (36)
Checkpoint: the base measures 3.25 in (8.3 cm) across.
Rnd 7: Sc 5, inc; repeat 6 times. (42)
Rnd 8: Sc 6, inc; repeat 6 times. (48)
Rnd 9: Sc 7, inc; repeat 6 times. (54)
Rnd 10: Sc 8, inc; repeat 6 times. (60)
Rnd 11: Sc 9, inc; repeat 6 times. (66)
Checkpoint: the base lies flat and measures 6 in (15.2 cm) across.
Wall – Cream Band
Rnd 12: Sc in BLO of each st around. (66) This creates a crisp fold line, and the wall starts to turn upward.
Rnds 13–14: Sc in each st around. (66) At the end of Rnd 14, sl st to the next st and fasten off Color A.
Using the round-start marker, put a locking marker in st 1 and another in st 34. These are the strap positions. Each half of the wall has 33 sts between them.
Checkpoint: the cream band is 0.75 in (1.9 cm) tall.
Wall – Lavender Mesh
Rnd 15: Join Color B in st 1. Ch 4 (counts as dc + ch 1), then dc in the same st (first V-st). Skip 2 sts, V-st in next st; repeat 20 more times. Skip the last 2 sts and join with a sl st to the 3rd ch of the beginning ch-4. (22 V-sts)
This round places V-st 1 on st 1 and V-st 12 on st 34, so the mesh lines up with the strap markers. Count check: 22 V-sts × 3 sts each = 66.
Rnds 16–18: Sl st into the first ch-1 sp. Ch 4 (counts as dc + ch 1) and dc in the same sp. V-st in each ch-1 sp around, then join. (22 V-sts) At the end of Rnd 18, fasten off Color B.
Checkpoint: the wall is 2.75 in (7.0 cm) tall.
Work the rim (see Border) before you add the fans and V-lines.
Fan Appliqué (make 6)
Use Color A. Work in rows.
Row 1: MR, ch 3 (counts as dc), 6 dc in ring. Pull the ring closed but keep the piece a half circle. Do not join. (7 dc)
Row 2: Ch 4 (counts as dc + ch 1) and turn. Dc in next dc. Ch 1, dc in next dc; repeat 4 more times, working the last dc in the top of the turning ch. (7 dc, 6 ch-1 sps)
Row 3: Ch 1 and turn. Sc in first dc. 5 dc in next ch-1 sp, sc in next dc; repeat 6 times. (6 shells, 7 sc)
Row 4 (straight edge): Ch 1 and rotate. Work 7 sc evenly along the straight edge (row ends and ring). (7)
Fasten off and leave a 12 in (30.5 cm) tail.
Checkpoint: the fan is 3 in (7.6 cm) wide × 1.5 in (3.8 cm) tall.
Strap (make 2)
Use Color A.
Row 1: Ch 78. Sc in 2nd ch from hook and in each ch across. (77)
Rows 2–4: Ch 1, turn, sc in each st across. (77)
Fasten off and leave a 24 in (61.0 cm) tail.
Checkpoint: the strap is 22 in (55.9 cm) long × 1 in (2.5 cm) wide.
Make All Pieces
- Color A: 3 bases with cream bands, 3 rims, 6 fans, 2 straps, and 6 pairs of V-lines
- Color B: 3 mesh sections (Rnds 15–18)
Layout (front view, top to bottom):
/\ <- strap ends joined (peak)
/ \ <- free strap, 31 sts each side
| [ Basket 3 ] | <- strap sts 35-46
| | <- gap, strap sts 30-34
| [ Basket 2 ] | <- strap sts 18-29
| | <- gap, strap sts 13-17
| [ Basket 1 ] | <- strap sts 1-12
Strap stitches are counted from the foundation-chain end.
Joining
Order of work: Finish the rim on all three baskets (Border, Rnds 19–21), then sew on the fans and work the V-lines, then attach the straps.
Method: Whipstitch with Color A and a tapestry needle. Sew through both long edges of the strap so it lies flat against the wall.
Stitch-to-stitch logic: A strap is 3.5 sts per inch, and the wall is 3.5 in (8.9 cm) tall, so each basket takes 12 strap sts:
- 3 strap sts along the cream band (1 per round, Rnds 12–14)
- 6 strap sts along the mesh (Rnds 15–18, alternating 1 and 2 sts per round)
- 3 strap sts along the rim (1 per round, Rnds 19–21)
Steps:
1. Lay strap sts 1–12 over the st 1 marker of Basket 1. The foundation-chain end of the strap should be even with the base fold (Rnd 12). Sew it in place.
2. Sew the second strap over the st 34 marker in the same way.
3. Leave strap sts 13–17 free (1.5 in / 3.8 cm). Sew sts 18–29 to Basket 2, lining up both markers.
4. Leave sts 30–34 free. Sew sts 35–46 to Basket 3.
5. Lay the two free ends (31 sts each, about 8.75 in / 22.2 cm) flat, and whipstitch the short ends together to form the peak.
Tension: Sew snugly, but don’t let the stitching gather the strap. If the strap puckers, the baskets will tilt forward.
Checkpoint: the holder hangs straight and measures 21.5 in (54.6 cm) from the bottom fold to the peak.
Border (Rim, Make 3)
Border gauge: 3 sc rounds = 0.75 in (1.9 cm). Work the rim on each basket directly after Rnd 18.
Rnd 19 (conversion): Join Color A in the ch-1 sp of V-st 1, ch 1. 2 sc in the ch-1 sp, 1 sc in the gap before the next V-st; repeat around. Join to the first sc. Count: 44 sc in the spaces (2 per V-st) + 22 sc in the gaps (1 per gap) = 66. (66)
Rnd 20: Ch 1, sc in each st around, join. (66)
Rnd 21: Ch 1, rev sc in each st around, join. (66) Fasten off.
Counts per side: Sts 1–33 make up the front half and sts 34–66 make up the back half, 33 sts each. Each half sits above 11 V-sts (11 × 3 = 33). Every round of the rim matches the 66-st base, so the walls stay straight instead of flaring or pulling in.
Fans: Pin a fan to the front of the basket with its straight edge on top of Rnd 14. Center it on the gap between V-st 6 and V-st 7, which is midway between the strap markers. Whipstitch around the outer edge and the straight edge. Repeat on the back, centered between V-st 17 and V-st 18.
V-lines: Hold Color A behind the work. Starting at the top of Rnd 21 above V-st 4, work a surface sl st chain diagonally down through the rim and the mesh to the center top of the fan. Then work diagonally back up to the rim above V-st 9. Each arm drops 1.25 in (3.2 cm). Repeat on the back, using V-st 15 and V-st 20.
Final Blocking
- Weave in all ends, running them through matching colors.
- Spray each basket with water until it is damp but not dripping.
- Put a toilet paper roll inside each basket, or a jar 6 in (15.2 cm) across, to shape the wall.
- Pin the fans and V-lines flat, and pat the rim into an even roll.
- Pin the straps flat on a towel, checking that each one is 1 in (2.5 cm) wide.
- Let everything dry completely, about 24 hours.
- Hang the holder and check that the baskets are level.
Final Quality-Control Checklist
- Each base has 66 sts and measures 6 in (15.2 cm) across.
- Each mesh section has 22 V-sts in every round.
- Each rim has 66 sts and is 0.75 in (1.9 cm) deep.
- The fans are centered between the strap markers.
- The V-lines are symmetrical and meet at the top of each fan.
- Both straps are 77 sts and 22 in (55.9 cm) long.
- The gaps between tiers are equal, 1.5 in (3.8 cm) each.
- The peak seam is flat and secure.
Troubleshooting
- The base cups. Your tension is too tight. Go up one hook size for Rnds 1–11.
- The base ruffles. Your tension is too loose. Go down one hook size.
- The wall flares outward. Check that every rim round has exactly 66 sts.
- The mesh leans or spirals. Make sure you join every round and start each round in the first ch-1 sp.
- The fan curls. Steam-block it before sewing, and don’t pull the MR too tight.
- The baskets tilt. Re-sew the straps without gathering. The 12 strap sts must cover the full 3.5 in (8.9 cm) of wall.
- The roll won’t fit. Your basket is under 5.5 in (14.0 cm) across, so remake it with a larger hook.
Care
Hand wash in cool water with mild soap, reshape, and dry flat with a roll inside each basket. Do not tumble dry.

Final Notes
The measurements build on each other in this order:
- The 66-st base measures 6 in (15.2 cm) across.
- The cream band and mesh bring the wall to 2.75 in (7.0 cm).
- The rim adds 0.75 in (1.9 cm), so each basket is 3.5 in (8.9 cm) tall.
- The 77-st straps are 22 in (55.9 cm) long. Each one holds three 12-st basket sections and two 5-st gaps of 1.5 in (3.8 cm), leaving 31 sts on each side for the peak.
- The finished holder measures 6 in (15.2 cm) wide × 21.5 in (54.6 cm) tall.
If each basket checkpoint is right, the assembled holder will be right too.
Happy crocheting!