This little tree is a single flat ornament built from six fan-shaped shells stacked in three tiers: three shells at the base, two in the middle, and one at the top. Small diamond-shaped openings form between the shells, so the tree looks lacy without being fragile. A short, solid brown trunk sits under the center of the base, and a chained hanging loop rises from the tip.
The palette is simple and warm: soft cream cotton for the tree and a cinnamon brown for the trunk. It suits a natural, Scandinavian-style tree, gift wrapping, or a garland hook on a mantel. Each ornament uses only a few grams of yarn, so it is a good scrap project.
This pattern is written in US crochet terms. The finished ornament measures about 3.5 in (8.9 cm) wide and 3.75 in (9.5 cm) tall without the loop, or about 5.75 in (14.6 cm) tall including the 2 in (5.1 cm) hanging loop.
Construction is quick. You crochet a small single crochet rectangle for the trunk first. Next, you work the cream tree in rows from the bottom up: a row of chain loops, a row of shells, then fewer loops and shells on each tier. A single round of single crochet outlines the whole tree and forms the hanging loop. Finally, you sew the trunk to the center of the base and block.
Finished Size and Construction
- Finished size: 3.5 in (8.9 cm) wide x 3.75 in (9.5 cm) tall, excluding loop
- Height with loop: about 5.75 in (14.6 cm)
- Skill level: Easy / advanced beginner
- Terminology: US crochet terms
- Yarn weight: Worsted (CYC 4), cotton or cotton blend
- Hook: 4.0 mm (US G-6)
- Number of pieces: 1 ornament, made as 2 parts (tree and trunk) sewn together
- Layout: 3 tiers of shells, 3-2-1, trunk centered under the base
- Trunk size: 1.2 in (3.0 cm) wide x 1.2 in (3.0 cm) tall
- Size before border: about 3.25 in (8.3 cm) wide x 3.6 in (9.1 cm) tall with trunk
- Border depth: 1 round of single crochet, about 1/8 in (0.3 cm)
Materials
Choose a smooth, tightly plied cotton or cotton blend in worsted weight. Cotton shows the shell texture clearly and holds its triangle shape after blocking. Avoid fuzzy or very loose yarns, since the diamond openings between the shells will blur.
- Cream (tree, border, hanging loop): 10 g, about 17 m
- Brown (trunk): 3 g, about 5 m
These quantities assume a yarn of about 85 m per 50 g and include a margin for swatching, the hanging loop, and weaving in ends.
Tools
- 4.0 mm (US G-6) crochet hook
- Tapestry needle
- Scissors
- 1 stitch marker
- Rust-proof pins
- Blocking mat or folded towel
- Spray bottle with clean water
- Ruler or tape measure
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sp – space
- st(s) – stitch(es)
- RS / WS – right side / wrong side
Special stitch – Shell: Work 9 dc into the same chain space. The dc share one base and fan outward, so the shell is narrow at the bottom and wide at the top. The 5th dc is the center dc of the shell.
Gauge and Checkpoints
Gauge: 10 sc and 10 rows = 2 in (5.1 cm) with a 4.0 mm hook. One finished shell measures about 1.1 in (2.8 cm) across the top and 0.6 in (1.5 cm) tall.
The trunk doubles as your gauge swatch. Make it first and measure it before starting the tree. Exact gauge is not critical for an ornament, but it controls the shape: a hook that is too large makes floppy shells and wide holes.
Checkpoints
- Trunk: 1.2 in (3.0 cm) wide x 1.2 in (3.0 cm) tall
- After Row 2: base tier about 3.25 in (8.3 cm) wide and 0.8 in (2.0 cm) tall
- After Row 4: middle tier about 2.2 in (5.6 cm) wide; cream height about 1.6 in (4.1 cm)
- After Row 6: top shell about 1.1 in (2.8 cm) wide; cream height about 2.4 in (6.1 cm)
- After border and blocking: 3.5 in (8.9 cm) x 3.75 in (9.5 cm)
If your pieces are too big, go down to a 3.5 mm (US E-4) hook. If they are too small, go up to a 4.5 mm (US 7) hook. Also check that your shells do not flatten into a straight line. If they do, your dc are too tall, so tighten the yarn-over.

Trunk
With brown, ch 7.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across, turn. (6 sc)
Rows 2–6: Ch 1 (does not count as a st), sc in each st across, turn. (6 sc each row)
Fasten off, leaving a 10 in (25.4 cm) tail for sewing. The trunk should measure 1.2 in (3.0 cm) square.
Tree
The tree is worked flat in rows, from the base up. The turning ch 1 never counts as a stitch.
Row 1 (foundation loops): With cream, ch 17. Sc in 2nd ch from hook, [ch 5, skip next 4 ch, sc in next ch] 3 times, turn. (4 sc and 3 ch-5 sps)
The sc sit in foundation chains 1, 6, 11, and 16, counting from the end where you made the first sc. The center loop spans chains 6 through 11, which is where the trunk will attach.
Row 2 (base tier): Ch 1, sc in first sc, [Shell in next ch-5 sp, sc in next sc] 3 times, turn. (3 shells and 4 sc = 31 sts)
The base tier should measure about 3.25 in (8.3 cm) across. Each shell should fan open evenly with its 9 dc meeting at a single point between two sc.
Row 3 (loops for middle tier): Sl st in first sc and in next 5 dc. This lands you in the center dc of the first shell. Ch 1, sc in same dc, [ch 5, sc in center dc of next shell] 2 times, turn. Leave the rest of the row unworked. (3 sc and 2 ch-5 sps)
Each ch-5 loop now arches from the center of one shell to the center of the next, crossing over the sc between them. The shells you work into these loops will sit right above the gaps of the base tier.
Row 4 (middle tier): Ch 1, sc in first sc, [Shell in next ch-5 sp, sc in next sc] 2 times, turn. (2 shells and 3 sc = 21 sts)
Check that the middle tier is about 2.2 in (5.6 cm) across. You will see a small diamond-shaped opening under each Row 3 loop, between the shells.
Row 5 (loop for top tier): Sl st in first sc and in next 5 dc. Ch 1, sc in same dc, ch 5, sc in center dc of next shell, turn. Leave the rest of the row unworked. (2 sc and 1 ch-5 sp)
Row 6 (top tier): Ch 1, sc in first sc, Shell in ch-5 sp, sc in last sc. (1 shell and 2 sc = 11 sts)
Fasten off and weave in the ends now, before the border, so the outline covers them neatly. The cream tree should measure about 3.25 in (8.3 cm) wide and 2.4 in (6.1 cm) tall.
Border and Hanging Loop
Border gauge: Work one sc into each exposed stitch along the edge and one sc into each foundation chain. Single crochet is short, and there are no increases along the sides, so the border outlines each shell without ruffling. It adds only about 1/8 in (0.3 cm) to each edge.
The tree has three sides: the left slanted edge, the right slanted edge, and the base. In this round, the side counts do not include the corner stitches. The corners are counted separately.
Edge stitches, left side (bottom to top):
– First sc of Row 2
– Dc 1–4 of the left base shell
– First sc of Row 4
– Dc 1–4 of the left middle shell
– First sc of Row 6
– Dc 1–4 of the top shell
That is 15 stitches.
Edge stitches, right side (top to bottom): The right side mirrors the left.
– Dc 6–9 of the top shell
– Last sc of Row 6
– Dc 6–9 of the right middle shell
– Last sc of Row 4
– Dc 6–9 of the right base shell
– Last sc of Row 2
That is also 15 stitches.
With RS facing and the base at the bottom, join cream with a sl st at the bottom-left corner, in the side of the Row 1 sc.
Border round:
- Bottom-left corner: Ch 1, sc in the same place as the join. (1 sc)
- Left side: Sc in each of the 15 left-edge sts listed above. (15 sc)
- Top corner: In the center dc of the top shell, work (sc, ch 24, sc). (2 sc and 1 ch-24 loop)
- Right side: Sc in each of the 15 right-edge sts. (15 sc)
- Bottom-right corner: Sc in the side of the last Row 1 sc. (1 sc)
- Base: Working into the free loops of the foundation chain, sc in each of the 16 ch. (16 sc)
- Join with a sl st to the first sc.
Total: 1 + 15 + 2 + 15 + 1 + 16 = 50 sc, plus the ch-24 hanging loop.
Why the math works: Each slanted side has 3 tiers x (1 sc + 4 dc) = 15 edge stitches, so 15 sc on each side keeps the shells flat and the tree symmetrical. The base has 16 foundation chains, so 16 sc keep it the same width as Row 1. The ch-24 loop folds into 12 chains per side. At about 6 ch per inch, that gives a 2 in (5.1 cm) loop.
Fasten off and weave in the end.
Attaching the Trunk
Count the 16 base sc from left to right. The trunk goes under sc 6 through 11, leaving 5 sc free on each side (5 + 6 + 5 = 16).
Hold the trunk’s last row against the back of the base, so the trunk top tucks just behind the border. Using the brown tail, whipstitch each of the 6 trunk sts to one of the 6 center base sc, one stitch to one stitch. Keep the stitches snug but not tight, so the base stays straight. Weave the tail into the trunk.
Final Blocking
- Lightly spray the ornament with water until it is damp, not dripping.
- Lay it RS up on a blocking mat or folded towel.
- Pin the top center and the two bottom corners of the cream base to form a symmetrical triangle 3.5 in (8.9 cm) wide.
- Gently open each shell with your fingertips so the 9 dc fan out evenly.
- If needed, shape each diamond opening between the shells with a pin.
- Pin the trunk square, checking it is centered under the middle base shell.
- Straighten the hanging loop so it rises straight up from the tip.
- Measure: 3.5 in (8.9 cm) wide x 3.75 in (9.5 cm) tall without the loop.
- Let the ornament dry completely, then remove the pins.
Final Quality-Control Checklist
- The tree has 6 shells: 3 on the base, 2 in the middle, and 1 on top.
- Each shell has 9 dc that fan open from a single point.
- Middle and top shells sit centered over the gaps below them.
- Diamond openings are even and similar in size.
- The border has 15 sc on each slanted side and 16 sc along the base.
- The trunk is centered, with 5 base sc visible on each side.
- The hanging loop is about 2 in (5.1 cm) tall and sits at the exact top center.
- The ornament measures 3.5 in (8.9 cm) x 3.75 in (9.5 cm) without the loop.
- All ends are woven in and hidden on the WS.
Troubleshooting
Shells curl or cup. Your dc may be tight compared with the ch-5 loops. Loosen the dc slightly, or work the ch-5 loops a little more firmly.
Shells look flat and wide instead of fan-shaped. The ch-5 loops are too loose. Tighten the chain tension or use ch 4 for the loops.
Middle shells sit off-center. You likely miscounted the sl sts in Row 3 or Row 5. You should land in the 5th dc, which is the center of the shell.
Base edge looks wavy. Check that you worked exactly one sc in each of the 16 foundation chains, and not into the ch-5 spaces.
Tree leans to one side. Compare the left and right border counts. Both slanted sides need exactly 15 sc.
Trunk pulls the base inward. Your whipstitches are too tight. Redo them with gentler tension.
Hanging loop twists. Block the loop with a pin at the top and let it dry straight.
Care
Hand wash in cool water with mild soap, press out the water in a towel, and dry flat, reshaping the shells as it dries. Store it flat or hanging, where it won’t get crushed.

Final Notes
The measurement chain is short and easy to follow. A trunk 1.2 in (3.0 cm) square confirms your gauge. The base tier of 3 shells reaches 3.25 in (8.3 cm), the middle tier 2.2 in (5.6 cm), and the top shell 1.1 in (2.8 cm). One border round of 50 sc adds about 1/8 in (0.3 cm) per edge. That brings the ornament to 3.5 in (8.9 cm) x 3.75 in (9.5 cm), with a 2 in (5.1 cm) loop on top. Once your first tree matches these numbers, make a few more for gifts or your own tree.
Happy crocheting!