This little tree is made from stacked double crochet shells. Three fans sit on the bottom tier, two in the middle and one at the top. Small diamond-shaped gaps open up where the tiers meet, so the ornament looks light and lacy on a branch.
The tree is soft powder blue and the trunk is a short block of warm brown single crochet. The pale blue gives it a frosty, Scandinavian feel, and the brown keeps it looking like a tree. Any light color works for the tree, including white, sage or silver-grey.
All terms are US crochet terms. The finished ornament is 4.25 in (10.8 cm) wide and 4.1 in (10.4 cm) tall, not counting the hanging loop. The loop adds about 1.5 in (3.8 cm), for a total hanging height of about 5.6 in (14.2 cm).
You make it in one piece, from the bottom up. First you work the trunk in rows. Then you change to blue and make a row of chain loops, and each tier of shells is worked on the tier below it. A short edging row tidies the scalloped sides and makes the hanging loop at the top point.
Finished Size and Construction
- Finished size: 4.25 in (10.8 cm) wide x 4.1 in (10.4 cm) tall, plus a 1.5 in (3.8 cm) loop
- Skill level: Easy (advanced beginner)
- Terminology: US crochet terms
- Yarn weight: DK (light, #3), cotton or cotton blend
- Hook: 3.5 mm (US E-4)
- Number of pieces: 1 (a single ornament, worked in one piece)
- Layout: 3-2-1 shell triangle on a single crochet trunk
- Trunk size: 1.4 in (3.6 cm) wide x 1.1 in (2.8 cm) tall
- Size before border: 4.0 in (10.2 cm) wide x 4.0 in (10.2 cm) tall
- Border depth: about 1/8 in (0.3 cm) on each slanted side and at the peak
Materials
Yarn advice: A smooth mercerized or combed DK cotton gives you crisp shells and a firm trunk. Fuzzy or very soft acrylic still works, but the gaps between the tiers will be less clear. Choose a matte or slightly shiny yarn that doesn’t split much. The shells are worked into chain spaces, and split plies are easy to catch there.
- Light blue (tree, edging, loop): 5 g / 12 m
- Brown (trunk): 2 g / 5 m
These amounts include a margin for your gauge check, weaving in ends and one frogged attempt. The ornament itself uses less.
Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– Scissors
– Stitch marker (optional)
– Ruler or tape measure
– Pins, a blocking mat or folded towel, and a spray bottle
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sk – skip
- st(s) – stitch(es)
- sp – space
- [ ] – repeat the instructions in brackets the number of times stated
Special stitch – Shell: Work 9 dc into the stated chain space. Inside each shell, number the dc from 1 to 9 in the order you made them. The center dc is dc 5.
Gauge and Checkpoints
Gauge: 20 sc and 22 rows = 4 in (10.2 cm) in brown single crochet worked in rows.
Your trunk works as the gauge test. Make it first and measure it before you join the blue:
- Checkpoint 1 – Trunk: 1.4 in (3.6 cm) wide x 1.1 in (2.8 cm) tall.
- Checkpoint 2 – After Row 2 (bottom tier): 4.0 in (10.2 cm) across the three shells. Total height including the trunk is 2.1 in (5.3 cm).
- Checkpoint 3 – After Row 4 (middle tier): 2.7 in (6.9 cm) across the two shells. Total height is 3.0 in (7.6 cm).
- Checkpoint 4 – After Row 6 (top shell): 1.4 in (3.6 cm) across the top shell. Total height is 4.0 in (10.2 cm).
If your trunk is too big (more than 1.5 in / 3.8 cm wide), go down to a 3.25 mm (D-3) hook. If it is too small (under 1.3 in / 3.3 cm wide), go up to a 3.75 mm (F-5) hook. Use the same hook for the blue so the trunk and tree stay in proportion.

Pattern
Trunk (Brown)
With brown, ch 8.
Row 1: Sc in 2nd ch from hook and in each ch across. (7 sc)
Rows 2–6: Ch 1 (doesn’t count as a st), turn, sc in each st across. (7 sc)
At the end of Row 6, fasten off brown. Check Checkpoint 1: 1.4 in (3.6 cm) x 1.1 in (2.8 cm).
Tree (Light Blue)
Turn the trunk so you are ready to work across Row 6. With blue, join with a sl st in the first st.
Row 1 (foundation loops): Ch 1 (doesn’t count as a st), sc in same st as join (st 1), [ch 4, sk 1 st, sc in next st] 3 times. Your sc are now in sts 1, 3, 5 and 7. (4 sc, 3 ch-4 sps)
The three ch-4 loops arch upward over the trunk. Each one holds one shell of the bottom tier.
Row 2 (bottom tier, 3 shells): Ch 1, turn, sc in first sc, [9 dc in next ch-4 sp, sc in next sc] 3 times. (27 dc + 4 sc = 31 sts, 3 shells)
As you work, each shell fans upward into a half-circle. The outer shells lean slightly outward past the trunk, which gives the tree its wide base. Check Checkpoint 2.
Row 3 (bridge chains): Turn. Loosely sl st in the first 5 sts (the sc and dc 1–4 of the first shell). Ch 1 (doesn’t count as a st), sc in the center dc (dc 5) of the same shell, ch 5, sc in the center dc of the next shell, ch 5, sc in the center dc of the last shell. Leave dc 6–9 of the last shell unworked. (3 sc, 2 ch-5 sps)
Each ch-5 sits across the dip where two shells meet. When you work the next tier into it, the dip stays open as a diamond-shaped gap.
Row 4 (middle tier, 2 shells): Ch 1, turn, sc in first sc, [9 dc in next ch-5 sp, sc in next sc] 2 times. (18 dc + 3 sc = 21 sts, 2 shells)
Check Checkpoint 3.
Row 5 (bridge chain): Turn. Loosely sl st in the first 5 sts (the sc and dc 1–4 of the first shell). Ch 1, sc in the center dc of the same shell, ch 5, sc in the center dc of the next shell. Leave dc 6–9 of that shell unworked. (2 sc, 1 ch-5 sp)
Row 6 (top shell): Ch 1, turn, sc in first sc, 9 dc in ch-5 sp, sc in last sc. (9 dc + 2 sc = 11 sts, 1 shell)
Fasten off and check Checkpoint 4: 4.0 in (10.2 cm) wide at the bottom tier and 4.0 in (10.2 cm) tall overall.
Border (Edging and Hanging Loop)
Border gauge: One sc for each dc of the exposed half-shells. Each sc sits right on top of its dc and adds about 1/8 in (0.3 cm) along each slanted edge and at the peak.
How the edge is built: Each side of the triangle shows three half-shells: the outer half of a bottom-tier shell, a middle-tier shell and the top shell. Each half-shell has exactly 4 dc (dc 1–4 or dc 6–9). The center dc already holds the bridge sc of the row above it. On the side where you slipped stitches in Rows 3 and 5, work each sc through the sl st and the dc top together. The count is still 4.
With the right side facing, hold the tree upside down if that’s easier for you. With blue, join with a sl st in the sc at the end of Row 2 on the slipped side (bottom corner).
Side A (up the slanted edge):
– Sc in each of dc 1–4 of the bottom-tier shell. (4 sc)
– Sl st in the end sc of Row 4. (1 sl st)
– Sc in each of dc 1–4 of the middle-tier shell. (4 sc)
– Sl st in the end sc of Row 6. (1 sl st)
– Sc in each of dc 1–4 of the top shell. (4 sc)
Side A total: 1 join sl st + 12 sc + 2 sl st = 15 sts.
Peak and hanging loop: In the center dc (dc 5) of the top shell, work (sc, ch 20, sc). (2 sc + ch-20 loop)
Side B (down the slanted edge):
– Sc in each of dc 6–9 of the top shell. (4 sc)
– Sl st in the other end sc of Row 6. (1 sl st)
– Sc in each of dc 6–9 of the middle-tier shell. (4 sc)
– Sl st in the other end sc of Row 4. (1 sl st)
– Sc in each of dc 6–9 of the bottom-tier shell. (4 sc)
– Sl st in the end sc of Row 2. (1 sl st)
Side B total: 12 sc + 3 sl st = 15 sts.
Border total: 15 + 2 + 15 = 32 sts, plus the ch-20 loop.
Why the math works: Each half-shell has 4 dc, and you work exactly one sc per dc, so the scallop curve keeps its shape without cupping or rippling. Both sides cross 3 half-shells (3 x 4 = 12 sc), so the two sides match. The sl sts in the valleys add almost no height, so the notches between tiers stay sharp. The center dc of each lower shell is already covered by a bridge sc, so you never work into it twice. At this gauge, a ch-20 is about 3.2 in (8.1 cm) long. Folded in half, it gives the 1.5 in (3.8 cm) loop.
Fasten off and leave a 6 in (15.2 cm) tail for weaving in.
Final Blocking
- Weave in all ends. Run the blue tails along the backs of the shells and the brown tail up the side of the trunk. Leave tails about 1/4 in (0.6 cm) long for now.
- Lightly spray the ornament with water until it is damp but not dripping.
- Lay it on a blocking mat or folded towel, right side up.
- Pin the trunk into a neat rectangle: 1.4 in (3.6 cm) wide x 1.1 in (2.8 cm) tall.
- Spread the bottom tier to 4.25 in (10.8 cm) wide. Put one pin in each outer bottom corner.
- Pin the peak so the total height (not counting the loop) is 4.1 in (10.4 cm).
- With a blunt needle or your fingertip, open each diamond-shaped gap and round each shell into an even half-circle.
- Lay the hanging loop flat and straight above the peak.
- Leave it to dry completely, usually 4–6 hours. Then unpin and trim the tails close.
For a crisper ornament, spray it with a light fabric stiffener or a sugar-water solution before it dries.
Final Quality-Control Checklist
- Trunk has 7 sc across and 6 rows, with straight sides.
- Row 1 has 4 sc and 3 ch-4 loops.
- Bottom tier has 3 shells of 9 dc each (31 sts).
- Middle tier has 2 shells of 9 dc each (21 sts).
- Top tier has 1 shell of 9 dc (11 sts).
- Diamond-shaped gaps show clearly where the tiers meet.
- Border has 15 sts on each side plus 2 sc at the peak (32 sts).
- Hanging loop is centered over the top shell.
- Finished size is 4.25 in (10.8 cm) x 4.1 in (10.4 cm).
- All ends are woven in and invisible from the front.
Troubleshooting
Shells ruffle or cup: Your dc are too loose for the chain space. Go down a hook size, or make the dc a little shorter.
The tree leans to one side: You may have missed a sc between shells. Count each row: 31, 21, then 11 sts.
Gaps between tiers are closed: The ch-5 bridges were too tight. Chain loosely, or make the chains with a hook one size up and switch back for the shells.
Trunk is wider than the bottom loops: The ch-4 loops are too tight. Work them loosely so they arch up instead of pulling in the trunk edge.
Slip-stitch side looks thicker: That’s normal. Work the border sc firmly on that side and block both sides to the same width.
Hanging loop twists: Before blocking, untwist it so the front of the chain faces forward, then pin it flat.
Care
Hand wash in cool water with mild soap, press out the water in a towel and lay flat to dry. If you used stiffener, reshape and re-stiffen after washing.

Final Notes
Everything comes back to one measurement chain. The trunk is 1.4 in (3.6 cm) wide and 1.1 in (2.8 cm) tall. The bottom tier spreads to 4.0 in (10.2 cm). The middle tier brings the total height to 3.0 in (7.6 cm), and the top shell brings it to 4.0 in (10.2 cm). The edging takes it to 4.25 in (10.8 cm) x 4.1 in (10.4 cm), with a 1.5 in (3.8 cm) loop on top. If your trunk matches Checkpoint 1, the rest will follow.
Make one in blue for a frosty look, then try white, cream or soft green for a mixed set on your tree.
Happy crocheting!