Blue Lattice Doves Strip Curtain Crochet Pattern

This curtain is a set of four slim strips of deep blue filet mesh. Each strip carries seven lacy cream doves, all flying to the right. Light comes through the open squares, and the doves stand out clearly against the blue grid. Each strip ends in a row of three scalloped fans with chain loops that slide straight onto a curtain rod.

The style is classic filet lace made with a modern, chunky cotton. Two colors keep it calm: deep denim blue for the mesh and cream for the doves. All instructions use US crochet terms.

Each finished strip measures 6.5 in (16.5 cm) wide and 36.75 in (93.3 cm) long, from the bottom edge to the tops of the fans. The hanging loops add about 1.75 in (4.4 cm). Four strips give 26 in (66.0 cm) of crochet width, plus whatever gaps you leave between them on the rod.

Here is how it’s built. You work each strip as a 6-square mesh rectangle, 35 rows long, which makes seven blocks of 5 rows each. You crochet each dove separately as one piece: body first, then a wing and a tail worked off its edge. Sew one dove onto each block, then finish each strip with a single crochet border and the fan header.

Finished Size and Construction

  • Finished strip size: 6.5 × 36.75 in (16.5 × 93.3 cm), plus 1.75 in (4.4 cm) hanging loops
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hooks: 5.0 mm (H-8) for the strips, 4.0 mm (G-6) for the doves
  • Number of pieces: 32 (4 mesh strips and 28 dove appliqués)
  • Layout: 4 separate strips, each 1 block wide × 7 blocks tall
  • Piece size: each block is 6 × 5 in (15.2 × 12.7 cm); each dove is 4.5 × 3.75 in (11.4 × 9.5 cm)
  • Strip size before border: 6 × 35 in (15.2 × 88.9 cm)
  • Border depth: 0.25 in (0.6 cm) on the sides and bottom; 1.5 in (3.8 cm) at the top, made up of the border round plus the 1.25 in (3.2 cm) fan header

Materials

Use a smooth worsted-weight cotton, or a cotton blend, of about 190 m per 100 g. Cotton holds the square mesh crisply and blocks well. Avoid fuzzy yarns, because they blur the lace.

  • Denim blue: 150 g (285 m) for the strips, borders, headers and dove eyes
  • Cream: 120 g (228 m) for 28 doves and for sewing them on

These quantities include a margin of about 20%.

Tools:
– 5.0 mm (H-8) and 4.0 mm (G-6) crochet hooks
– Tapestry needle
– Stitch markers
– Blocking mats, rust-proof pins and a spray bottle
– Tape measure and scissors
– Curtain rod up to 1 in (2.5 cm) in diameter

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • sk – skip
  • st(s) – stitch(es)
  • sp(s) – space(s)
  • tch – turning chain
  • RS / WS – right side / wrong side

Special stitches:
– Mesh square: a tr, ch 3, followed by the next tr. One square measures 1 × 1 in (2.5 × 2.5 cm).
– Fan: 7 tr worked into the same stitch.
– Picot: ch 3, then sl st into the sc just made.

Gauge and Checkpoints

Strip gauge (5.0 mm hook): 4 mesh squares = 4 in (10.2 cm) wide, and 4 mesh rows = 4 in (10.2 cm) tall.

Border gauge: 4 sc = 1 in (2.5 cm).

Test one piece first. Work Rows 1–5 of the strip and make one dove, then measure both.

Checkpoints:
1. After Row 5, the strip measures 6 × 5 in (15.2 × 12.7 cm).
2. After Rnd 1 of the dove body, the body measures 2.75 in (7.0 cm) long.
3. The finished dove measures 4.5 × 3.75 in (11.4 × 9.5 cm).
4. After Row 35, the strip measures 6 × 35 in (15.2 × 88.9 cm).
5. After Border Rnd 1, the strip measures 6.5 × 35.5 in (16.5 × 90.2 cm).
6. After the header, the strip measures 6.5 × 36.75 in (16.5 × 93.3 cm).

If your test piece is too big, go down half a hook size. If it’s too small, go up half a hook size.

If the width is right but the rows are too short, pull up your first loop slightly taller on each tr. Don’t change the stitch counts. A dove more than 0.25 in (0.6 cm) off size won’t sit centered in its block, so adjust the 4.0 mm hook the same way.

Cream-colored crocheted dove with lace-patterned wings and dark eye on a blue mesh crochet background.

Part 1: Mesh Strip (make 4)

Use the 5.0 mm hook and denim blue.

Ch 31.

Row 1 (RS): Tr in the 11th ch from hook. The 10 skipped ch count as the first tr, a ch-3 space and 3 skipped base ch. Ch 3, sk 3 ch, tr in next ch; repeat from * 4 more times. Turn. (7 tr, 6 ch-3 sps = 6 squares)

Row 2: Ch 7 (counts as tr and ch 3). Sk the first tr and ch-3 sp, then tr in the next tr. Ch 3, tr in next tr; repeat from * 3 more times. Ch 3, then tr in the 7th ch of the skipped ch-10. Turn. (7 tr, 6 ch-3 sps)

Rows 3–35: Repeat Row 2, but work the last tr of each row into the 4th ch of the turning ch-7. (7 tr, 6 ch-3 sps in every row)

Place a stitch marker at the side edge after Rows 5, 10, 15, 20, 25 and 30. These mark the 7 blocks of 5 rows each. Don’t fasten off. Keep the loop on a marker for the border.

Checkpoint: 6 × 35 in (15.2 × 88.9 cm).

Part 2: Dove Appliqué (make 28)

Use the 4.0 mm hook and cream.

Body

Ch 12.

Rnd 1: Sc in the 2nd ch from hook, then sc in the next 2 ch. Hdc in the next 4 ch, dc in the next 3 ch, and 6 dc in the last ch (this is the head end). Rotate the piece to work along the opposite side of the chain. Dc in the next 3 ch, hdc in the next 4 ch, sc in the next 2 ch, and 2 sc in the last ch. Join with a sl st to the first sc. (27 sts)

Rnd 2: Ch 1. Work 2 sc in the first st, sc in the next 9 sts, 2 sc in each of the next 6 sts, sc in the next 9 sts, 2 sc in the next st, and sc in the last st. Join. (35 sc)

Fasten off, leaving a 16 in (40.6 cm) tail for sewing. For reference:
– sts 3–11 are the top edge
– sts 12–23 are the head
– sts 24–32 are the underside
– sts 33–35 and sts 1–2 are the tail end

Beak

With RS facing, join cream with a sl st in st 17. Ch 3, sl st in the 2nd ch from hook, sc in the next ch, then sl st in st 17. Fasten off. (1 pointed beak)

Wing

Row 1 (RS): Join cream in st 4. Ch 1, sc in the same st, then sc in the next 6 sts. Turn. (7 sc)

Row 2: Ch 3 (counts as dc) and work 1 dc in the same st. Work 2 dc in each of the next 5 sts, then dc in the last st. Turn. (13 dc)

Row 3: Ch 1, sc in the first dc. Ch 5, sk 2 dc, sc in next dc; repeat from * 3 more times. Turn. (5 sc, 4 ch-5 loops)

Row 4: Ch 1, sc in the first sc. 7 dc in the next ch-5 loop, sc in the next sc; repeat from * 3 more times. Turn. (28 dc, 5 sc)

Row 5: Ch 1, sc in the first sc. Then work the following sequence 4 times, once for each feather:
– ch 3, sk 1 dc, sc in the next dc
– ch 3, sk 1 dc, (sc, ch 5, sc) in the next dc
– ch 3, sk 1 dc, sc in the next dc
– ch 3, sk 1 dc, sc in the next sc

Fasten off. (21 sc, 16 ch-3 sps, 4 ch-5 feather tips)

Tail

Row 1 (RS): Join cream in st 33. Ch 1, then sc in sts 33, 34, 35, 1 and 2. Turn. (5 sc)

Row 2: Ch 3 (counts as dc) and work 1 dc in the same st. Work 2 dc in each of the next 4 sts. Turn. (10 dc)

Row 3: Ch 5 (counts as tr and ch 1), tr in the next dc. Ch 1, tr in next dc; repeat from * 7 more times. Turn. (10 tr, 9 ch-1 sps)

Row 4: Ch 1, sc in the first tr. Ch 3, sc in next tr; repeat from * 8 more times, working the last sc in the 4th ch of the turning ch. (10 sc, 9 ch-3 loops)

Fasten off.

Eye

With blue, work one French knot (wrapped twice) 0.5 in (1.3 cm) behind the beak, centered in the head.

Weave in all ends except the long body tail. Pin the dove to 4.5 × 3.75 in (11.4 × 9.5 cm). Angle the wing up and back, fan the tail down and back, and open every feather tip and tail loop. Spray, then let it dry.

Make All Pieces

Piece Color Quantity
Mesh strip Denim blue 4
Dove appliqué Cream 28 (7 per strip)
Eye (French knot) Denim blue 28

Layout (seen from the front, RS facing, strips hung left to right):

 Strip A   Strip B   Strip C   Strip D
 [fans ]   [fans ]   [fans ]   [fans ]
 Dove 7    Dove 7    Dove 7    Dove 7
 Dove 6    Dove 6    Dove 6    Dove 6
 Dove 5    Dove 5    Dove 5    Dove 5
 Dove 4    Dove 4    Dove 4    Dove 4
 Dove 3    Dove 3    Dove 3    Dove 3
 Dove 2    Dove 2    Dove 2    Dove 2
 Dove 1    Dove 1    Dove 1    Dove 1

Dove 1 sits on Rows 1–5, Dove 2 on Rows 6–10, and so on up to Dove 7 on Rows 31–35. Every dove faces right.

Joining: Appliqué the Doves

The strips are never joined to each other. The joining step is sewing each dove onto its block.

Placement: Lay the strip RS up. Center each dove inside its 6 × 5 in (15.2 × 12.7 cm) block, about 0.75 in (1.9 cm) in from each side edge, with the head toward the right edge. Pin the body in place.

How to sew it on: Thread the long body tail and whipstitch around the body only.
– On every 2nd sc of body Rnd 2, catch the nearest tr post or ch-3 bar underneath.
– Where the body crosses an open square, just pass the needle behind it. Don’t pull it closed.
– Tack each of the 4 wing feather tips to one mesh bar, using a single stitch through the ch-5 loop.
– Tack tail loops 1, 5 and 9 the same way.

Tension: Each stitch should just hold the dove flat. If the squares underneath pinch or tilt, take the stitches out and sew more loosely.

Size checkpoint: After all 7 doves are sewn on, the strip should still measure 6 × 35 in (15.2 × 88.9 cm). If it’s shorter, your stitches are too tight.

Border

Use the 5.0 mm hook and denim blue. Border gauge is 4 sc = 1 in (2.5 cm).

Rnd 1: Put the live loop back on the hook. You are at the top corner where Row 35 ended. Ch 1 and don’t turn. Work around the strip as follows:
– Work (sc, ch 2, sc) in the corner tr.
– Down the side, work 4 sc in each of the 35 row ends.
– At the bottom corner, work (sc, ch 2, sc) at the base of the corner tr.
– Across the bottom, work 1 sc at the base of each of the 5 inner tr and 3 sc in each of the 6 ch-3 sps.
– At the next corner, work (sc, ch 2, sc).
– Up the other side, work 4 sc in each of the 35 row ends.
– At the top corner, work (sc, ch 2, sc).
– Across the top, work 1 sc in each of the 5 inner tr and 3 sc in each of the 6 ch-3 sps.
– Sl st to the first sc and fasten off.

Counts per side (each corner’s two sc belong to the two sides that meet there):
– Top: 1 + 5 + 18 + 1 = 25 sc
– Bottom: 25 sc
– Each long side: 1 + 140 + 1 = 142 sc
– Total: 334 sc and 4 ch-2 corner sps

Row 2 (header fans): With RS facing, join blue in the right-hand corner sc of the top edge (the first of the 25 top sc). Ch 1 and sc in the same st. Sk 3 sts, 7 tr in the next st (fan), sk 3 sts, sc in the next st; repeat from * 2 more times. The sc land on sts 1, 9, 17 and 25, and the fans on sts 5, 13 and 21. Ch 1 and turn. (3 fans, 4 sc = 25 sts)

Row 3 (hanging loops and picots):
1. Sl st in the first sc, ch 14, and sl st in the same sc. This makes the first hanging loop.
2. Repeat the following 3 times, once over each fan:
– Sc in each of the next 3 tr.
– Sc in the next tr and work a picot.
– Sc in each of the next 3 tr.
– Sl st in the next sc, ch 14, and sl st in the same sc.

Fasten off. (21 sc, 3 picots, 4 hanging loops)

Why the math works:
– Sides: 35 rows of 1 in each × 4 sc per row = 140 sc, which is exactly 35 in (88.9 cm) at border gauge. The sides lie flat without ruffling or pulling in.
– Top and bottom: 6 squares of 4 sts each = 24, plus 1 for the far edge = 25. The header repeat is 8 sts, and 1 + (3 × 8) = 25, so the three fans sit exactly centered.
– Hanging loops: Ch 14 at 4 ch per inch gives a 3.5 in (8.9 cm) loop, which wraps a rod up to 1 in (2.5 cm) thick.

Final Blocking

  1. Soak the strip in cool water for 10 minutes. Press the water out in a towel; don’t wring it.
  2. Pin it RS up to 6.5 × 36.75 in (16.5 × 93.3 cm).
  3. Pin the side edges straight every 2 in (5.1 cm).
  4. Push a pin into the corners of each block so the squares sit square.
  5. Pin each fan into a smooth scallop and open the picots.
  6. Open each dove’s wing tips and tail loops with pins.
  7. Let it dry completely, at least 24 hours.
  8. Hang it on the rod for 24 hours, then re-measure. A slight drop is normal with cotton.

Final Quality-Control Checklist

  • Every mesh row has 7 tr and 6 ch-3 spaces.
  • The strip measures 6 × 35 in (15.2 × 88.9 cm) before the border.
  • There are 7 doves per strip, all facing right and centered in their blocks.
  • Each dove has 4 wing feathers and 9 tail loops.
  • Every eye and beak is secure.
  • Border Rnd 1 has 25 / 142 / 25 / 142 sc.
  • There are 3 fans and 4 hanging loops per strip.
  • All 4 strips match in length to within 0.5 in (1.3 cm).
  • All ends are woven in.

Troubleshooting

The squares are wider than they are tall. Your tr are short. Lift the first loop higher, or go up half a hook size.

The strip leans to one side. You skipped or doubled a tr at the end of a row. Count to 7 tr every row.

The wing curls. Check that Row 4 has exactly 7 dc in each loop, then re-block it damp.

The sides of the border ripple. Your rows are shorter than 1 in (2.5 cm). Recheck the strip gauge before working the border.

Doves pucker the mesh. Unpick the stitches and resew them with looser whipstitches.

The loops are too tight on the rod. Add 2 ch per loop for each extra 0.25 in (0.6 cm) of rod diameter.

Care

Hand wash the curtain in cool water with a mild soap. Lay it flat to dry and reshape it while damp. Don’t tumble dry it or hang it while wet.

Blue-grey crocheted lace curtain with cream bird motifs frames a bedroom window, styled with white hydrangeas and a blue pillow.

Final Notes

The whole curtain builds on one measurement chain. One mesh square is 1 in (2.5 cm). Six squares across and five rows tall make a 6 × 5 in (15.2 × 12.7 cm) block for each dove. Seven blocks give 6 × 35 in (15.2 × 88.9 cm). The border brings each strip to 6.5 × 35.5 in (16.5 × 90.2 cm), and the fan header finishes it at 6.5 × 36.75 in (16.5 × 93.3 cm). Check each stage as you go, and the four strips will hang evenly at your window.

Happy crocheting!

Leave a Comment