This cord keeper is a long filet-mesh wall panel that holds charging cables neatly on a hook or peg rail. The cream body has an open grid with three fan motifs down the center, and the top flares into two angled wings. A sage green corded border frames the whole outline.
A raised cream dove sits at the top center, with a small gold beak and spread wings. Below it are two green holly leaves and three round red berries. A green strap with four loose bands runs down the middle, and each band holds one coiled cable.
The pattern uses US terms. The finished panel is 6.5 in (16.5 cm) wide across the body and 9.5 in (24.1 cm) across the wings. It is 14 in (35.6 cm) tall at the center and 15.5 in (39.4 cm) at the wing tips, not counting the loop.
You crochet the panel in one piece from the bottom up. Increases round off the bottom and flare the top into wings, and each wing tip is finished separately. Then you add a three-round border and sew on the strap, bands, dove, holly and loop.
Finished Size and Construction
- Finished size: 6.5 in (16.5 cm) body, 9.5 in (24.1 cm) wingspan, 14 in (35.6 cm) center height, 15.5 in (39.4 cm) at wing tips
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Sport (#2) cotton
- Hook: 3.0 mm
- Number of pieces: 1 main panel worked as a single piece, plus a sewn-on strap, 4 bands, a hanging loop and appliqués
- Layout: single vertical panel with the strap centered lengthwise
- Size before border: 5.5 in (14.0 cm) body, 8.5 in (21.6 cm) wings, 13 in (33.0 cm) center height, 14.5 in (36.8 cm) at wing tips
- Border depth: 0.5 in (1.3 cm)
Materials
Use smooth mercerized sport-weight cotton, about 155 m per 50 g. It gives crisp mesh and holds its shape when cables go in and out.
- Cream (A): 40 g, about 124 m
- Sage green (B): 30 g, about 93 m
- Red (C): 5 g, about 16 m
- Gold (D): about 1 m
- Black embroidery floss: about 0.5 m
These quantities include a margin of about 15 percent.
Tools: 3.0 mm hook, tapestry needle, pins, yarn scraps for stuffing, blocking mat, spray bottle, tape measure.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- dtr – double treble (yo 3 times)
- sc2tog – single crochet 2 together
- rev sc – reverse single crochet (crab stitch)
- sp – space
- st(s) – stitch(es)
Mesh: dc, ch 2, dc. Each mesh is 3 sts, and neighboring meshes share a dc. A row of n meshes has 3n + 1 sts.
Row start: ch 5 (counts as dc and ch 2), dc in the next dc.
Beg inc (adds 1 mesh): ch 7, dc in the first dc. The ch-7 loop forms the bottom, outer side and top of the new mesh.
End inc (adds 1 mesh): ch 2, dtr in the base of the last dc.
Fan (over 3 meshes): ch 1, skip the next ch-2 sp and dc, 6 dc in the next ch-2 sp, ch 1, skip the next dc and ch-2 sp, dc in the next dc. That is 9 sts, the same as 3 meshes.
Picot: ch 3, sl st in the 3rd ch from hook.
Gauge and Checkpoints
- Mesh: 8 meshes and 8 rows = 4 in (10.2 cm)
- Sc: 24 sc and 24 rows = 4 in (10.2 cm)
Before starting the panel, make and block a test swatch: ch 29 and work 8 rows of 8 meshes. If it measures over 4 in (10.2 cm), go down a hook size. If it’s smaller, go up a size.
Checkpoints:
– Row 4: 5.5 in (14.0 cm) wide, 2 in (5.1 cm) tall
– Row 22: 11 in (27.9 cm) tall
– Row 26: 8.5 in (21.6 cm) wide, 13 in (33.0 cm) tall
– Row 29: 14.5 in (36.8 cm) at the wing tips
If you’re more than 0.25 in (0.6 cm) off at any checkpoint, change hooks. Row height drifts the most, so pull each dc up to its full height.

Main Panel
With A.
Rounded Bottom
Foundation: Ch 20.
Row 1: Dc in the 8th ch from hook, *ch 2, skip 2 ch, dc in next ch; repeat from * 3 more times. Turn. (5 meshes, 16 sts)
Row 2: Beg inc, *ch 2, dc in next dc; repeat from * across, end inc. Turn. (7 meshes, 22 sts)
Row 3: Repeat Row 2. (9 meshes, 28 sts)
Row 4: Repeat Row 2. (11 meshes, 34 sts)
Straight Body
Row 5: Row start, *ch 2, dc in next dc; repeat from * across. Turn. (11 meshes, 34 sts)
Rows 6–7: Repeat Row 5.
Row 8 (fan row): Row start, work 3 more meshes, work a fan, work 4 meshes. Turn. (34 sts: 4 meshes, fan, 4 meshes)
Row 9 (restore row): Row start, work 3 more meshes, ch 2, dc in the 2nd dc of the fan, ch 2, dc in the 5th dc of the fan, ch 2, dc in the next dc, work 4 meshes. Turn. (11 meshes, 34 sts)
The fan’s 6 dc fill positions 3–8 of its 9 sts. That puts the 2nd and 5th dc exactly where mesh dc would be, so the grid lines up again.
Rows 10–13: Repeat Row 5.
Rows 14–15: Repeat Rows 8–9.
Rows 16–19: Repeat Row 5.
Rows 20–21: Repeat Rows 8–9.
Row 22: Repeat Row 5.
The fans now sit 3 in (7.6 cm) apart.
Wing Flare
Row 23: Repeat Row 2. (13 meshes, 40 sts)
Row 24: Repeat Row 2. (15 meshes, 46 sts)
Row 25: Repeat Row 2. (17 meshes, 52 sts)
Row 26: Repeat Row 5. (17 meshes, 52 sts)
First Wing
Row 27: Row start, work 5 more meshes. Turn. (6 meshes, 19 sts)
Row 28: Sl st in the next 2 ch and the next dc, row start, work 4 more meshes. Turn. (5 meshes, 16 sts)
Row 29: Row start, work 2 more meshes. Fasten off. (3 meshes, 10 sts)
Second Wing
Join A in the last st of Row 26 at the other outer edge and repeat Rows 27–29. Check: 6 + 5 + 6 = 17. The 5 center meshes stay unworked, and each wing tip rises 1.5 in (3.8 cm) above the center top edge.
Strap, Bands and Appliqués
Strap (B): Ch 7. Row 1: Sc in the 2nd ch from hook and across. (6 sc) Rows 2–60: Ch 1, turn, sc across. (6 sc) It measures 1 in (2.5 cm) × 10 in (25.4 cm).
Bands (B, make 4): Work like the strap for 36 rows, 1 in (2.5 cm) × 6 in (15.2 cm). Sew the short ends together to make a ring. Flattened, it’s 3 in (7.6 cm) wide.
Dove body (A): Ch 9. Rnd 1: Sc in the 2nd ch from hook and the next 6 ch, 3 sc in the last ch. Working along the other side of the chain, sc in the next 6 ch, 2 sc in the first ch. Join. (18 sc) Rnd 2: Ch 1, 2 sc in the first st, sc in the next 6, 2 sc in each of the next 3, sc in the next 6, 2 sc in each of the last 2. Join. (24 sc) This makes a 2 in (5.1 cm) × 1 in (2.5 cm) oval. For the tail, work (ch 4, sl st) 3 times at one end.
Dove head (A): Magic ring, 6 sc. Rnd 2: 2 sc in each st. (12 sc, 0.75 in or 1.9 cm across)
Dove wings (A, make 2): Ch 7. Row 1: Sc in the 2nd ch from hook and across. (6 sc) Row 2: Ch 1, turn, 2 sc in the first st, sc in the next 5. (7 sc) Row 3: Ch 1, turn, sc in the next 6, 2 sc in the last st. (8 sc) Row 4: Ch 1, turn, sl st in the first st, *(hdc, dc, hdc) in the next st, sl st in the next st; repeat from * 2 more times, sl st in the last st. (3 feathers, 1.5 in or 3.8 cm wide)
Beak (D): Ch 3, sl st in the 2nd ch from hook, sc in the last ch.
Holly leaves (B, make 2): Ch 9. Working along one side: sl st in the 2nd ch from hook, sc, hdc, picot, dc in the next 2 ch, picot, hdc, sc, (sc, ch 2, sc) in the last ch. Working along the other side: sc, hdc, picot, dc in the next 2 ch, picot, hdc, sc, sl st. (1.5 in or 3.8 cm long)
Berries (C, make 3): Magic ring, 6 sc. Rnd 2: 2 sc in each st. (12 sc) Rnd 3: Sc2tog 6 times. (6 sc) Stuff and close. (0.5 in or 1.3 cm)
Hanging loop (B): Ch 43. Sc in the 2nd ch from hook and across. (42 sc, 7 in or 17.8 cm)
Border
Use B. Border gauge is 6 sc per inch, which matches the mesh. Each mesh gets 3 sc (2 in the ch-2 sp, 1 in the dc). Each straight row end is 0.5 in (1.3 cm) tall and gets 3 sc. Each stepped row end gets 4 sc to cover its longer diagonal.
Round 1: Join at the bottom right corner and sc around:
- Bottom (5 meshes): 15
- Each lower curve (Row 1 end 3, Rows 2–4 ends 4 each): 15 × 2 = 30
- Each straight side (Rows 5–22, 18 × 3): 54 × 2 = 108
- Each flare (Rows 23–25 ends 4 each, Row 26 end 3): 15 × 2 = 30
- Each outer wing edge (Rows 27–29 ends): 9 × 2 = 18
- Each wing top (9 sc, plus 2 extra for 3 sc in the outer corner): 11 × 2 = 22
- Each inner wing slope (Row 28 unworked 6, Row 29 end 3, Row 28 end 3, Row 27 unworked 3, Row 27 end 3): 18 × 2 = 36
- Center top (5 meshes): 15
Join. (274 sc)
Round 2: Ch 1, sc in each st around. Work 3 sc in the center st of each wing tip (+2 each). Sc2tog at each of the 2 valleys where a wing meets the center top (−1 each). Join. (274 + 4 − 2 = 276 sc)
Round 3: Ch 1, rev sc in each st. Join and fasten off. (276 sts)
Why it works: 3 sc per 0.5 in (1.3 cm) matches the mesh’s 6 sts per inch, so the edges lie flat. The extra corner stitches let the wing tips turn, and the sc2tog keeps the valleys from bunching. Three rounds at 6 rounds per inch add exactly 0.5 in (1.3 cm) on every edge.
Final Blocking
- Soak the panel, strap and bands in cool water, then roll them in a towel to press out the water.
- Pin the panel to 6.5 in (16.5 cm) across the body, 9.5 in (24.1 cm) across the wings and 14 in (35.6 cm) tall at the center.
- Pin along each side row to keep the grid square, and open each fan into a half-circle.
- Pin the wing tips into points and the strap to 10 in (25.4 cm). Let everything dry completely.
- Slide the bands onto the strap. Center them 1.5 in (3.8 cm), 4 in (10.2 cm), 6.5 in (16.5 cm) and 9 in (22.9 cm) from the strap’s top end, and tack each one at the center back only.
- Sew the strap down the center of the panel along both long edges, starting 1.5 in (3.8 cm) below the center top. Don’t sew through the bands.
- Sew the dove body to the top center, then add the head at the upper right, the beak and a black French knot eye. Sew the wings angled upward.
- Sew the leaves in a V over the top of the strap and the berries where the leaves meet.
- Sew both ends of the loop to the back of the center top so it stands 3 in (7.6 cm) above the edge.
Final Quality-Control Checklist
- Body is 6.5 in (16.5 cm) and wings are 9.5 in (24.1 cm)
- Height is 14 in (35.6 cm) at the center and 15.5 in (39.4 cm) at the tips
- The fans line up vertically
- The border has 276 sts and lies flat
- The strap is straight and the bands take cables easily
- The appliqués are sewn down on every edge
Troubleshooting
- Mesh skews: Work each dc into a dc, never into a space.
- Grid shifts after a fan: Check that the fan is 9 sts and that the restore row goes into the 2nd and 5th dc.
- Border ruffles: Recount each section or use a smaller hook.
- Border cups: Make sure every stepped row end got 4 sc.
- Bands too tight: Add 6 rows to each band, which adds 1 in (2.5 cm).
- Panel hangs crooked: Re-center the loop ends behind the dove.
Care
Remove the cables, hand wash in cool water, then reshape and dry flat.

Final Notes
The measurements build on each other. A gauge of 2 meshes per inch gives a 5.5 in (14.0 cm) body and 8.5 in (21.6 cm) wings. With 29 rows, the panel reaches 14.5 in (36.8 cm) at the wing tips. The 0.5 in (1.3 cm) border then brings it to 6.5 in (16.5 cm) by 9.5 in (24.1 cm) and 15.5 in (39.4 cm) tall. Check each stage before moving on, and everything will fit where it should.
Happy crocheting!