Petal Window Mandala Ornament Crochet Pattern

The Petal Window Mandala Ornament is a small, lacy round decoration made in one single piece. Eight open chain-loop petals form a flower inside a solid ring of double crochet, so light shows through every petal. There’s a sturdy hanging loop at the top, and a short chain-cord tassel with a wrapped neck hangs from the bottom.

The sample is made in a soft coral pink cotton. The design also looks lovely in cream, lilac and sage green, so a few colors together make a gentle, vintage-style set for the tree. Each ornament is still one piece on its own.

This pattern uses US crochet terms. The finished disc is 3.75 in (9.5 cm) across. With the hanging loop and tassel, the ornament is about 7 in (17.8 cm) tall.

The build is simple. You start with a center ring of single crochet, then add a round of long chain petals and a round that gathers the petal tips. A double crochet ring and a single crochet edge finish the disc. You add the hanging loop and tassel last, then wrap the tassel neck with a separate strand.

Finished Size and Construction

  • Finished disc size: 3.75 in (9.5 cm) across
  • Total height: about 7 in (17.8 cm), including loop and tassel
  • Skill level: Easy to intermediate
  • Terminology: US crochet terms
  • Yarn weight: Sport weight (#2) cotton
  • Hook: 2.75 mm (US C-2)
  • Number of pieces: 1
  • Layout: One round motif, with petals pointing up and down, the loop at the top and the tassel at the bottom
  • Piece size before the outer ring (border): 3 in (7.6 cm) after Round 3
  • Border depth (Rounds 4–5): 0.375 in (1.0 cm) on each side

Materials

Choose a smooth mercerized or combed cotton in sport weight. Cotton keeps the open petal shapes crisp after blocking and doesn’t fuzz on the tree. Avoid splitty or very soft acrylic, because the long chain loops will stretch out of shape.

  • Main color (sample: coral pink): 10 g, about 30 m per ornament
  • Optional extra colorways: cream, lilac or sage green, 10 g / 30 m each, one color per ornament

These amounts include a margin of about 20 percent. They also cover the 24 in (61.0 cm) strand used to wrap the tassel neck.

Tools:

  • 2.75 mm (US C-2) crochet hook
  • Tapestry needle
  • Scissors
  • Stitch marker
  • Blocking mat or folded towel, and rustproof pins
  • Spray bottle with water
  • Ruler or tape measure
  • Optional: fabric stiffener

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sp – space
  • st(s) – stitch(es)
  • rep – repeat

Standing sc: Start with a slipknot on your hook. Insert the hook into the stitch or space, yarn over and pull up a loop, then yarn over and pull through both loops. This joins new yarn without a starting chain.

Picot end: Chain the stated number, then sl st into the 4th ch from the hook. This makes the small loop at the end of each tassel cord.

Gauge and Checkpoints

Gauge: 13 sc = 2 in (5.1 cm) and 7 ch = 1 in (2.5 cm), using a 2.75 mm hook. Gauge matters more here than in most ornaments. The petals are measured in chains, and the outer ring has to fit around them.

Make one test ornament through Round 3 and measure it. Use these checkpoints, measured flat without stretching:

  • After Round 1: 0.75 in (1.9 cm) across
  • After Round 2: 2.75 in (7.0 cm) from one petal tip to the opposite tip
  • After Round 3: 3 in (7.6 cm) across
  • After Round 4: 3.5 in (8.9 cm) across
  • After Round 5: 3.75 in (9.5 cm) across

If the piece is more than 0.25 in (0.6 cm) too big at any checkpoint, change to a 2.5 mm hook. If it’s more than 0.25 in (0.6 cm) too small, change to a 3 mm hook. If the earlier rounds are on target and only Round 4 ruffles or cups, read the Troubleshooting section before changing hooks.

Detailed salmon-pink crocheted lace with linked circular geometric motifs displayed on wood.

Pattern

Round 1: Center Ring

Ch 8, then sl st to the first ch to form a ring.

Ch 1 and work 16 sc into the ring. Sl st to the first sc. (16 sc)

The ring should close neatly around a small open center and measure 0.75 in (1.9 cm) across its outside edge.

Round 2: Chain Petals

This round makes the eight open teardrop petals. Each petal is a long chain loop that starts and ends in the same stitch.

Ch 1. (Sc, ch 14, sc) in the next sc, then sc in the next sc. Rep from * to * 7 more times. Sl st to the first sc. (16 sc worked 1 per existing st + 8 extra sc = 24 sc, plus 8 ch-14 loops)

Lay the piece flat and gently open each loop into a petal shape. Each petal should be about 1 in (2.5 cm) long from the ring to its tip. Fasten off and weave in the tail.

Round 3: Gathering the Petal Tips

This round links the petal tips with short chain bridges. The tip of a petal is the space between the 7th and 8th chains of its ch-14 loop.

Join yarn with a standing sc into the tip of any petal, then work 2 more sc into the same tip. Ch 5. Work 3 sc into the tip of the next petal, ch 5. Rep from * to * 6 more times. Sl st to the first sc. (24 sc and 8 ch-5 sps)

Each group of 3 sc pinches its petal into a point, and the ch-5 bridges sit between the petals. Insert the hook through the same side of every loop so the petals don’t twist. The piece should now be 3 in (7.6 cm) across.

Border: Outer Ring

The outer ring is the border of this single motif. It turns the eight petal groups into one smooth, solid circle. It has no corners or sides, so it’s counted in 8 equal segments, one per petal.

Border gauge: The stitches of Round 5 sit along a circle about 3.5 in (8.9 cm) across, measured through the middle of the edge round. That circle is about 11 in (27.9 cm) around. At 6.5 sc per inch, 72 sc measure 11.1 in (28.2 cm), so the edge matches the circle and lies flat.

Round 4: Double Crochet Ring

Ch 3 (counts as the first dc). Dc in the next 2 sc, then 6 dc in the next ch-5 sp. Dc in each of the next 3 sc, then 6 dc in the next ch-5 sp. Rep from * to * 6 more times. Sl st to the top of the beginning ch-3. (24 dc worked 1 per existing sc + 48 dc in the ch-5 sps = 72 dc)

Each segment has 9 dc: 3 above the petal tip and 6 in the bridge. The 6 dc in each space fan outward and form the short upright posts between the petals. The piece should now be 3.5 in (8.9 cm) across.

Round 5: Single Crochet Edge

Ch 1, then sc in each dc around. Sl st to the first sc. (72 sc worked 1 per existing st + 0 extra = 72 sc)

Each of the 8 segments still has 9 sc. Number the stitches for placement, starting with sc 1 as the first stitch of the round:

  • Top: sc 2 is the middle stitch above the first petal and becomes the top of the ornament.
  • Bottom: sc 38 (2 + 36) is the middle stitch above the opposite petal and becomes the bottom.

Why the math works: The center ring has 16 sts, which gives 8 petals with one plain sc between each pair. Each petal tip gets 3 sc and each bridge gets 6 dc, so every segment has exactly 9 sts. Eight segments of 9 sts make 72 sts in both Round 4 and Round 5. Since 72 is even, the top and bottom stitches are exactly 36 sts apart, on two opposite petals.

Hanging Loop

Don’t fasten off. Sl st in the next sc so you’re in sc 2.

Ch 20, then sl st into sc 2 again to form the loop. Work 26 sc into the ch-20 loop, covering the chains completely. Sl st into sc 2 once more. Fasten off, leaving a 6 in (15.2 cm) tail, and weave it in through the back of the loop base.

The covered loop stands about 1.25 in (3.2 cm) above the disc.

Tassel

Hold the ornament with the loop at the top and find sc 37, 38 and 39 at the bottom center. Join yarn with a sl st in sc 37.

Strand: Ch 18 and sl st in the 4th ch from the hook (picot end made). Sl st in each of the next 14 ch back toward the disc, then sl st in the same base sc.

Work the strands as follows:

  • 2 strands in sc 37
  • Sl st in sc 38, then 3 strands in sc 38
  • Sl st in sc 39, then 2 strands in sc 39

(7 strands total) Fasten off and weave in the end.

Each strand is a firm slip-stitch cord about 2 in (5.1 cm) long with a small loop at the end.

Wrapped Neck

Cut a 24 in (61.0 cm) strand of the same color. Gather all 7 strands together and measure 0.25 in (0.6 cm) down from the edge of the disc.

Lay one end of the strand along the tassel, pointing up. Wrap the long end tightly around the tassel and over that end 8 times, working downward so each wrap sits neatly beside the last. The band should be about 0.25 in (0.6 cm) tall.

Thread the remaining end onto a tapestry needle and pass it under all the wraps, bringing it out at the bottom of the band. Trim it so it hides among the tassel strands. Pull the upward end gently to tighten, then trim it flush with the top of the band.

Final Blocking

  1. Weave in any remaining tails before blocking.
  2. Draw a 3.75 in (9.5 cm) circle on paper and cover it with clear plastic, or mark the circle on your mat.
  3. Spray the ornament until it’s evenly damp but not dripping.
  4. Lay it face up on the guide. Pin the edge at sc 2, at sc 38 and at the two side points between them. Then add pins in between until the circle is even.
  5. Shape each petal into a smooth teardrop with your fingers. If a petal tip drifts away from the outer ring, pin it in place.
  6. Pin the hanging loop straight up.
  7. Straighten each tassel strand and pin the picot ends so they hang evenly.
  8. Let the piece dry completely, usually 6 to 8 hours.
  9. Remove the pins and measure again. The disc should be 3.75 in (9.5 cm) across.

For a crisper finish, lightly spray the dry ornament with fabric stiffener, then pin it again until dry.

Final Quality-Control Checklist

  • The center ring has 16 sc and a small, round opening.
  • All 8 petals are there and are the same size.
  • Every petal tip is pinched by 3 sc.
  • Round 4 has 72 dc, with 9 in each segment.
  • Round 5 has 72 sc and lies flat.
  • The disc is 3.75 in (9.5 cm) across.
  • The hanging loop is centered over a petal, and the tassel hangs directly below the opposite petal.
  • The tassel has 7 strands, each about 2 in (5.1 cm) long with a picot end.
  • The wrapped band is snug, even and about 0.25 in (0.6 cm) tall.
  • All tails are hidden and trimmed.

Troubleshooting

Petals twist or flip over. Make sure the chain isn’t twisted before you close each loop. In Round 3, work into the same side of each loop.

The outer ring ruffles. Your dc are shorter than gauge. Work Round 4 with a hook 0.25 mm larger, and check that no space has extra dc.

The outer ring cups inward. Your ch-5 bridges are too tight. Work the chains more loosely, or use a 3 mm hook for the Round 3 chains only.

Petals look floppy inside the ring. Make the ch-14 loops firmer as you work Round 2, and block with stiffener.

Tassel strands curl. Tight slip stitches make the cords spiral. Loosen your slip stitches, then steam or wet block the strands straight.

The hanging loop is off-center. Count again from sc 1. The loop belongs in sc 2, and the center of the tassel belongs in sc 38.

Ornaments in a set don’t match. Use the same hook and brand for every color, and check each one at the Round 3 checkpoint.

Care

Hand wash in cool water with mild soap, press out the water in a towel, then reshape and dry flat. Store flat in tissue paper so the petals and tassel stay neat.

Three crocheted snowflake ornaments in cream, purple, and green hang from evergreen garland with pinecones and warm golden lights.

Final Notes

The whole ornament follows one simple measurement chain. The 16 sc of the center ring give 8 petals, which bring the piece to 2.75 in (7.0 cm) from tip to tip. Round 3 gathers it at 3 in (7.6 cm). Round 4 builds the 72-stitch ring at 3.5 in (8.9 cm), and Round 5 finishes the disc at 3.75 in (9.5 cm). The 1.25 in (3.2 cm) loop and 2 in (5.1 cm) tassel bring the total height to about 7 in (17.8 cm).

Check your gauge on the first ornament and the rest of the set will match. Happy crocheting!

Leave a Comment