Monstera Cascade Leaf Strand Curtain Crochet Pattern

This curtain is made of hanging strands of heart-shaped monstera leaves. Each leaf has three pairs of curved lobes with open slits between them and a pointed tip. A cream chain runs down the middle of each leaf and branches into the lobes, which makes the leaves look like they have real veins.

The palette uses three colors. The leaf bodies are dark forest green, one round of lime green outlines every lobe, and cream yarn forms the veins, the cord, and the hanging loops. Light shows through the slits and through the gaps between strands, so the curtain looks airy and botanical when it hangs.

The pattern uses US crochet terms. The finished curtain has 10 strands of 14 leaves each. With loops hung at 5 in (12.7 cm) centers, it is about 49.5 in (125.7 cm) wide and 78.8 in (200.2 cm) long.

Construction is simple. First you make each leaf flat in one piece by working lobes off both sides of a foundation chain. Next you edge the leaf in lime. Finally you join the leaves into strands with one continuous cream cord that also adds the midrib and veins.

Finished Size and Construction

  • Finished size: 49.5 in (125.7 cm) wide x 78.8 in (200.2 cm) long
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: DK / light (#3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 140 leaves plus 10 cream strand cords
  • Layout: 10 strands across x 14 leaves down
  • Leaf size (blocked): 4.5 in (11.4 cm) wide x 4 in (10.2 cm) tall
  • Leaf size before border: 4 in (10.2 cm) wide x 3.6 in (9.1 cm) tall
  • Border depth: 1 round of sc, about 0.2 in (0.5 cm)

Materials

Choose a smooth mercerized DK cotton or cotton blend. It gives crisp lobe points and sharp slits, and it holds its shape when hung. The quantities below assume about 115 m per 50 g.

  • Color A, dark forest green (leaf bodies): 300 g / 690 m
  • Color B, lime green (border): 250 g / 575 m
  • Color C, cream (cords, midribs, veins, loops): 150 g / 345 m

These quantities include a safety margin of about 20 percent.

Tools: 3.5 mm (E-4) hook, tapestry needle, scissors, rust-proof pins, a blocking mat, a spray bottle, a tape measure, and a curtain rod at least 50 in (127 cm) long and no more than 1 in (2.5 cm) thick.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • tr – treble crochet
  • st(s) – stitch(es)
  • sp – space

Special stitch – surface sl st: Hold the yarn behind the work. Insert the hook from the front through the fabric, pull up a loop, and draw it through the loop on your hook. This makes a raised chain line on top of the leaf.

Gauge and Checkpoints

Gauge: 20 sc and 22 rows = 4 in (10.2 cm). Chains: 5 ch = 1 in (2.5 cm).

Make one complete leaf and border it before you start the rest. Check it at each stage:

  1. Foundation chain: the 15 working chains measure 3 in (7.6 cm).
  2. Lobe L: measures 2.4 in (6.1 cm) from base to point.
  3. Leaf body: about 4 in (10.2 cm) wide x 3.6 in (9.1 cm) tall with lobes relaxed.
  4. After border and blocking: 4.5 in (11.4 cm) x 4 in (10.2 cm).

If your leaf comes out more than 0.25 in (0.6 cm) too big, go down 0.5 mm in hook size. If it is too small, go up 0.5 mm. Watch your chain tension in particular, because tight chains pucker the midrib and pull the lobes inward.

Crocheted leaf ornament with lime and dark green yarn leaves arranged symmetrically on a cream cord against a soft background.

Leaf Body (Make 140)

Use Color A. You will work up one side of the foundation chain, around the top, back down the other side, and finish with the tip. Each lobe is made by chaining out and working back toward the midrib. Because each lobe is separate, the slits form on their own.

Ch 16. The chain closest to the slip knot is the stem end (top), and the 1st ch from the hook is the tip end (bottom).

Side 1 (tip to stem):
1. Sl st in 2nd ch from hook and in next 2 ch. (3 sl st)
2. Lobe S: Ch 8, sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch, 2 dc in next ch, dc in next ch, hdc in next ch. (8 sts)
3. Sl st in next 4 foundation ch.
4. Lobe M: Ch 11, sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch, 2 dc in next ch, dc in next 2 ch, 2 dc in next ch, dc in next ch, hdc in next ch. (12 sts)
5. Sl st in next 4 foundation ch.
6. Lobe L: Ch 13, sc in 2nd ch from hook, hdc in next ch, dc in next 2 ch, 2 dc in next ch, dc in next 2 ch, 2 dc in next ch, dc in next 2 ch, hdc in next ch, sc in next ch. (14 sts)
7. Sl st in last 4 foundation ch. (15 foundation ch used: 3 + 4 + 4 + 4)

Top notch: Ch 1.

Side 2 (stem to tip): Rotate the work and use the free loops on the other side of the foundation.
1. Sl st in next 4 loops, then work Lobe L.
2. Sl st in next 4 loops, then work Lobe M.
3. Sl st in next 4 loops, then work Lobe S.
4. Sl st in next 3 loops.

Tip: In the skipped 1st ch at the tip end, work (hdc, 2 dc, tr, ch 2, tr, 2 dc, hdc). Join with a sl st in the first sl st of Side 1 and fasten off.

Body count: 30 sl st, 68 lobe sts (2 x [8 + 12 + 14]), 8 tip sts, 1 tip ch-2 sp, and 1 top ch.

Lobe L sits 4 ch below the stem, so it angles up past the notch. That is what gives the leaf its heart shape.

Work the lime border (see Border below) on each leaf as soon as you finish its body. Do this before assembling the strands.

Make All Pieces

  • Color A: 140 leaf bodies
  • Color B: 140 borders, one per leaf
  • Color C: 10 strand cords (see Joining)

Layout (S = strand, L = leaf, o = hanging loop):

       S1 S2 S3 S4 S5 S6 S7 S8 S9 S10
loop   o  o  o  o  o  o  o  o  o  o
1      L  L  L  L  L  L  L  L  L  L
2      L  L  L  L  L  L  L  L  L  L
3      L  L  L  L  L  L  L  L  L  L
4      L  L  L  L  L  L  L  L  L  L
5      L  L  L  L  L  L  L  L  L  L
6      L  L  L  L  L  L  L  L  L  L
7      L  L  L  L  L  L  L  L  L  L
8      L  L  L  L  L  L  L  L  L  L
9      L  L  L  L  L  L  L  L  L  L
10     L  L  L  L  L  L  L  L  L  L
11     L  L  L  L  L  L  L  L  L  L
12     L  L  L  L  L  L  L  L  L  L
13     L  L  L  L  L  L  L  L  L  L
14     L  L  L  L  L  L  L  L  L  L

That makes 10 strands x 14 leaves = 140 leaves.

Joining: Strand Assembly

Use Color C. One continuous cord makes the hanging loop, the connecting chains, the V lines, the midribs, and the veins. Lay out 14 bordered leaves in a column, right side up and stem up.

Hanging loop: Ch 20 and sl st in the first ch to form a ring. The loop hangs about 2 in (5.1 cm) long.

For each leaf (repeat 14 times):
1. Connector: Ch 4. The last ch is the junction point, J.
2. V lines: Ch 11. Sl st in the center sc of the point on the left Lobe L. Sl st in each of the 11 ch back to J. Repeat for the right Lobe L.
3. Stem: Ch 4, then sl st in the top-notch ch-1 of the leaf.
4. Midrib and veins: Surface sl st down the center of the midrib, 1 per foundation ch:
– 4 surface sl st to reach Lobe L level. On each side, ch 5, sl st through the lobe where the chain lands, then sl st back in each of the 5 ch.
– 4 surface sl st to reach Lobe M level. Make the veins the same way with ch 4.
– 4 surface sl st to reach Lobe S level. Make the veins with ch 3.
– 3 surface sl st to the end of the foundation.
– 2 surface sl st down the center of the tip, then sl st in the lime ch-2 tip sp.

Per leaf, that is 17 surface sl st and 1 sl st.

After Leaf 14, ch 6 for a 1.2 in (3.0 cm) tail and fasten off.

Stitch-to-stitch logic: All attachment points are fixed stitches: the notch ch-1, the lime ch-2 tip sp, and the center sc of each Lobe L point. That keeps every leaf straight on the cord.

Tension: Work the chains at gauge. The V lines should lie flat without pulling the lobes inward. If they pull, change from 11 ch to 12 ch. If they sag, use 10.

Size checkpoint: On a strand, each leaf from notch to tip point measures 3.8 in (9.7 cm), and each gap of ch 4 + ch 4 is 1.6 in (4.1 cm). After 3 leaves, measure from the top of the loop to the tip of Leaf 3. It should be 2 + (3 x 1.6) + (3 x 3.8) = 18.2 in (46.2 cm). The full strand is 2 + (14 x 1.6) + (14 x 3.8) + 1.2 = 78.8 in (200.2 cm).

Border (Lime Edging Round)

Border gauge: 5 sc = 1 in (2.5 cm). Work this round on each leaf before strand assembly.

Join Color B with a sl st in the top-notch ch-1. That sl st counts as the 1 top sl st.

Side 2 (stem to tip):
– Sl st in each of 4 sl sts.
– Lobe L: Sc in each st or free loop up one edge, 3 sc in the point, then sc in each st or loop down the other edge: 12 + 3 + 14 = 29 sc.
– Sl st in each of 4 sl sts.
– Lobe M: 10 + 3 + 12 = 25 sc.
– Sl st in each of 4 sl sts.
– Lobe S: 7 + 3 + 8 = 18 sc.
– Sl st in each of 3 sl sts.

Tip: Sc in each of the next 4 sts, (sc, ch 2, sc) in the ch-2 sp, then sc in each of the next 4 sts. (10 sc)

Side 1 (tip to stem): Work it as a mirror of Side 2: 3 sl st, Lobe S (18 sc), 4 sl st, Lobe M (25 sc), 4 sl st, Lobe L (29 sc), 4 sl st. Join with a sl st in the first sl st and fasten off.

Counts per side: 72 sc + 15 sl st. Each lobe count already includes its 3 point sc.

Round total: 72 + 72 + 10 = 154 sc, plus 15 + 15 + 1 = 31 sl st, plus 1 ch-2 sp.

Why the math works: Each lobe is a single row, so one sc per stitch or free loop matches its edge length exactly, with no ruffling or cupping. Three sc at each point turn the 180-degree corner. Sl sts in the slits add no height, so the slits stay narrow and dark. Lobe L’s longer outer edge is 14 sc = 2.8 in (7.1 cm), which matches the lobe at gauge.

Final Blocking

  1. Soak a few bordered leaves in cool water, then roll them in a towel to press out the water.
  2. Pin each leaf to 4.5 in (11.4 cm) x 4 in (10.2 cm). Put the midrib straight down the center.
  3. Angle each Lobe L about 30 degrees above horizontal. Fan Lobes M and S evenly below it, leaving open slits.
  4. Pin every lobe point and the tip point. Let the leaves dry completely.
  5. After assembly, hang the strands and mist them lightly. Gently straighten the cords and leave them to dry while hanging.

Final Quality-Control Checklist

  • Each leaf measures 4.5 in x 4 in (11.4 cm x 10.2 cm).
  • Each border has 154 sc and 31 sl st.
  • The lobes are mirrored, with 3 per side plus the tip.
  • The midrib runs straight, with 3 vein pairs per leaf.
  • The V lines are even and flat.
  • There are 14 leaves per strand and each strand is 78.8 in (200.2 cm).
  • All 10 loops are the same size.
  • All ends are woven in.

Troubleshooting

  • Lobes curl: Your dc tension is too tight. Steam-block, or rework the lobe with a looser dc.
  • Midrib puckers: Your foundation chain is too tight. Chain with a hook 0.5 mm larger.
  • Leaf twists on the cord: The surface sl st drifted off center. Pull it out and rework it down the foundation line.
  • Strands differ in length: The connector chains don’t match. Count 4 + 4 ch at every gap and remeasure at Leaf 3.
  • Border ruffles: You added extra sc. Recount against 29, 25, and 18 sc per lobe.

Care

Hand wash in cool water with mild soap, then lay flat or hang to dry. Avoid wringing, because it can tangle the strands.

Cream crocheted curtains frame glass doors in a bright, plant-filled living room with neutral furniture and warm natural light.

Final Notes

The measurements build on each other. Each step depends on the one before it:

  • 5 sts per inch at gauge
  • a 3 in (7.6 cm) foundation
  • a 4 in x 3.6 in (10.2 cm x 9.1 cm) leaf body
  • a 154-sc border
  • a 4.5 in x 4 in (11.4 cm x 10.2 cm) blocked leaf
  • 1.6 in (4.1 cm) gaps between leaves
  • 78.8 in (200.2 cm) strands
  • 10 strands at 5 in (12.7 cm) centers, for a 49.5 in (125.7 cm) curtain

Check your first leaf carefully, and the rest will follow. Happy crocheting!

Leave a Comment