Berry Patch Strawberry Bag Holder Crochet Pattern

Berry Patch is a strawberry-shaped bag holder that hangs on a hook and holds your plastic grocery bags. You push bags in through the wide top and pull them out one at a time through the small ring at the bottom. The open mesh shows how many bags are left, and the green leaves and cream seeds make it look like a strawberry.

You need three colors: coral red for the body and bottom ring, sage green for the leaf collar and strap, and cream for the seeds. Use a sturdy worsted-weight cotton. It holds its shape, doesn’t stretch out much when the holder is full, and goes through the wash.

The pattern uses US crochet terms. The finished body is about 6 in (15.2 cm) wide at the top when laid flat and 15.5 in (39.4 cm) long from the top rim to the bottom of the ring, not counting the strap.

You work the body top-down in the round. It starts with a single crochet foundation, changes into a chain mesh, and gets narrower in three stages as the chain loops get shorter. It ends in a solid cuff. After that you make the ring, collar and strap separately, add the seeds, work a short border on the top rim and sew everything together.

Finished Size and Construction

  • Finished size: 6 in (15.2 cm) wide at the top x 15.5 in (39.4 cm) long, not counting the strap
  • Skill level: Easy+
  • Terminology: US
  • Yarn weight: #4 worsted, 100% cotton
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 4 (body, bottom ring, leaf collar, strap)
  • Layout: stacked vertically: strap, collar, body, ring
  • Body size before border: 6 in (15.2 cm) wide x 14.6 in (37.1 cm) long
  • Border depth: 0.5 in (1.3 cm), 2 rounds
  • Body after border: 6 in (15.2 cm) wide x 15.1 in (38.4 cm) long

Materials

Yarn: Use a smooth worsted-weight cotton with about 1.5 m per gram (roughly 85 m per 50 g). Acrylic also works, but the mesh will stretch more under the weight of the bags.

  • Coral red: 60 g / 90 m (body, border, ring)
  • Sage green: 30 g / 45 m (collar, leaves, strap)
  • Cream: 10 g / 15 m (seeds)

All quantities include a margin of about 20% for gauge swatches and yarn tails.

Tools:
– 5.0 mm (H-8) crochet hook
– Tapestry needle
– 4 stitch markers
– Scissors
– Measuring tape
– Pins and a spray bottle for blocking

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • sc2tog – single crochet 2 together
  • BLO – back loop only
  • sp – space
  • st(s) – stitch(es)
  • rnd(s) – round(s)

Special stitch: Seed wrap. Thread cream yarn on a tapestry needle. Bring it up just above one sc anchor of the mesh (the knot where two loops meet). Wrap it vertically around that anchor 4 times, keeping the wraps side by side, then bring the needle out at the back. This makes a small cream bump about 0.4 in (1.0 cm) long, shaped like a bean.

Gauge and Checkpoints

Solid gauge: 16 sc x 16 rnds = 4 in (10.2 cm) in sc worked in the round.

Mesh gauge:
– Ch-5 mesh: 1 repeat (sc + ch-5) = 0.75 in (1.9 cm) wide; 1 rnd = 0.75 in (1.9 cm) tall
– Ch-4 mesh: 1 rnd = 0.6 in (1.5 cm) tall
– Ch-3 mesh: 1 rnd = 0.5 in (1.3 cm) tall

Test first. Before you start the body, make the bottom ring. It is small and shows your tension right away. Its outside edge should measure 5 in (12.7 cm) around.

Checkpoints (measure the body flat):
– After Rnd 1: 6 in (15.2 cm) wide
– After Rnd 10: 7 in (17.8 cm) long
– After Rnd 16: 10.6 in (26.9 cm) long, about 5 in (12.7 cm) wide
– After Rnd 22: 13.6 in (34.5 cm) long, about 4 in (10.2 cm) wide
– After Rnd 26: 14.6 in (37.1 cm) long, 2.5 in (6.4 cm) wide at the cuff

If your piece is too big, go down half a hook size or chain more tightly. If it is too small, go up half a size. Change the hook rather than the stitch counts, because the collar and ring have to match the body stitch for stitch.

Close-up of a hand-crocheted strawberry with green leaves and white seed details on a wooden surface.

Body

Use coral red.

Foundation: Ch 48 and join with a sl st to the first ch to make a ring. Check that the chain isn’t twisted.

Rnd 1: Ch 1, sc in each ch around, then join with a sl st to the first sc. (48 sc)

Place a marker in st 1 and another in st 25. These mark the side folds: 24 sts on the front and 24 sts on the back.

Rnd 2 (change to mesh): Ch 1, sc in the first st, ch 5, skip 2 sts, sc in the next st; repeat from * 14 more times, then ch 5, skip the last 2 sts and join with a sl st to the first sc. (16 sc anchors, 16 ch-5 loops)*

The 48 sts divide into 16 groups of 3, with 1 anchor and 2 skipped sts in each.

Rnds 3–10 (ch-5 mesh): Sl st in each of the next 3 ch so you are at the center of the first loop. Ch 1, sc in the same loop, ch 5, sc in the next ch-5 loop; repeat from * around, then ch 5 and join to the first sc. (16 ch-5 loops each rnd)*

The anchors move half a loop each round, which forms the diamond pattern. Checkpoint: the body should be 7 in (17.8 cm) long.

Rnds 11–16 (ch-4 mesh): Sl st into the center of the first loop. Ch 1, sc in the same loop, ch 4, sc in the next loop; repeat from * around, then ch 4 and join. (16 ch-4 loops each rnd)*

Shorter loops make the body narrower without changing the number of loops, so the diamonds stay lined up.

Rnds 17–22 (ch-3 mesh): Work the same way with ch 3 between anchors. (16 ch-3 loops each rnd)

Rnd 23 (change to solid cuff): Ch 1. Work 1 sc in each of the 16 ch-3 loops, and work 1 extra sc into every 4th loop (loops 4, 8, 12 and 16). Join. 16 sc + 4 extra sc = 20 sc.

Rnds 24–26: Ch 1, sc in each st around, then join. (20 sc each rnd)

Fasten off and leave a 16 in (40.6 cm) tail for sewing on the ring.

The cuff is 20 sc ÷ 4 sc per in = 5 in (12.7 cm) around, which is 2.5 in (6.4 cm) wide when flat.

Bottom Ring

Use coral red.

Foundation: Ch 10 and join with a sl st to make a ring.

Rnd 1: Ch 1, then work 20 sc into the center of the ring so the sts cover the chain completely. Join and fasten off. (20 sc)

Push the sts together so the ring is firm. The outside edge is 5 in (12.7 cm) around, so the ring is about 1.6 in (4.1 cm) across with a center hole of about 1 in (2.5 cm).

Leaf Collar

Use sage green.

Foundation: Ch 48 and join without twisting.

Rnd 1: Ch 1, sc in each ch around, then join. (48 sc)

Rnd 2: Ch 1, sc in the BLO of each st around, then join. (48 sc)

Do not fasten off. Each of the 8 leaves is worked in rows over 6 sts of Rnd 2, and 8 x 6 = 48.

Leaf (make 8):

  • Row 1: Sc in the next 6 sts of Rnd 2. (6)
  • Row 2: Ch 1, turn, sc in the BLO of each st. (6)
  • Row 3: Ch 1, turn, sc in the BLO of each st. (6)
  • Row 4: Ch 1, turn, sc2tog, sc in the next 2 sts, sc2tog. (4)
  • Row 5: Ch 1, turn, sc in the BLO of each st. (4)
  • Row 6: Ch 1, turn, sc2tog twice. (2)
  • Row 7: Ch 1, turn, sc2tog. (1)

Tip: Ch 2, then sl st in the top of the Row 7 st.

Down the edge: Work 7 sl sts down the left side of the leaf (1 in each row end) until you are back at Rnd 2.

Start the next leaf’s Row 1 in the next unworked st of Rnd 2.

Working the rows in BLO forms ridges across each leaf, similar to veins. Each leaf is 1.5 in (3.8 cm) wide and 1.75 in (4.4 cm) long.

After the 8th leaf, sl st into the first st of the first leaf and fasten off.

Strap

Use sage green.

Foundation: Ch 41.

Row 1: Sc in the 2nd ch from the hook and in each ch across. (40 sc)

Fasten off and leave a 10 in (25.4 cm) tail at each end. The strap is 40 sc ÷ 4 sc per in = 10 in (25.4 cm) long.

Make All Pieces

Piece Color Qty
Body Coral red 1
Bottom ring Coral red 1
Leaf collar Sage green 1
Strap Sage green 1
Seed wraps Cream 36

Layout (top to bottom):

      [ STRAP ]        ends at st 1 and st 25
   [ LEAF COLLAR ]     48 sts
 [ BORDER - 48 sc ]
 [ BODY - mesh   ]     16 loops
   [ CUFF - 20 ]
    ( RING 20 )

Seed placement: Add 4 seed wraps on each of Rnds 3, 5, 7, 9, 11, 13, 15, 17 and 19, for 9 x 4 = 36 seeds.

  • On Rnds 3, 7, 11, 15 and 19, wrap the anchors at the start of loops 1, 5, 9 and 13.
  • On Rnds 5, 9, 13 and 17, wrap the anchors at the start of loops 3, 7, 11 and 15.

This staggers the seeds so you get 2 on the front and 2 on the back of every placement round.

Joining (Assembly)

Ring to cuff: Hold the ring against Rnd 26, outside edges together. Using the cuff tail, whipstitch 1 cuff st to 1 ring st all the way around. The counts match at 20 to 20, so the ring sits flat with no puckering. Pull each stitch snug but don’t squeeze the cuff in.

Collar to rim: Do this after the border (see below). Set the collar on top of the body with the leaves pointing down on the outside. Using a red tail, whipstitch the free loops of the collar’s foundation chain to the top of Border Rnd 2, matching 48 sts to 48 sts. Pin at the 4 quarter points first (sts 1, 13, 25 and 37) so the collar doesn’t twist.

Strap: Sew one end of the strap inside the rim at the st 1 marker and the other end at the st 25 marker. Overlap each end by 0.5 in (1.3 cm) and sew through both the border and the collar. When the holder hangs, the strap rises about 4 in (10.2 cm) above the leaves.

Tension tip: Make your whipstitches the same tension as your crochet. If the seam is tighter than the fabric, the top will pull in.

Size checkpoint: The assembled holder is 6 in (15.2 cm) wide at the collar and 15.5 in (39.4 cm) long including the ring.

Border

Border gauge: 16 sc = 4 in (10.2 cm), the same as the body’s solid gauge.

Hold the body upside down. Join coral red in the free loop of the foundation chain at the st 1 marker.

Rnd 1: Ch 1, sc in each free loop around, then join. (48 sc: 24 on the front and 24 on the back, between the markers)

Rnd 2: Ch 1, sc in each st around, then join. (48 sc: 24 per side)

Fasten off and leave a 24 in (61.0 cm) tail for sewing on the collar.

Why the math works: Since 24 sc ÷ 4 sc per in = 6 in (15.2 cm), the border is exactly as wide as Rnd 1 of the body. The border has 48 sts and so does the collar, so they line up stitch for stitch. The 2 rounds add 0.5 in (1.3 cm), so the body goes from 14.6 in (37.1 cm) to 15.1 in (38.4 cm) long. There are no corner stitches, because the body is a tube. The two marked sts are simply where it folds when laid flat.

Final Blocking

  1. Weave in all ends along solid stitches, not through the mesh.
  2. Mist the whole holder until it is damp but not soaked.
  3. Stuff the body lightly with a rolled towel so the mesh opens into even diamonds.
  4. Lay it flat and smooth it to 6 in (15.2 cm) wide at the top and 15.5 in (39.4 cm) long.
  5. Pin each leaf out flat and pin the tip into a point.
  6. Pin the strap straight.
  7. Leave it to dry completely, which takes about 12 hours, then take out the pins and towel.

Final Quality-Control Checklist

  • Rnd 1 and the border each have 48 sc
  • There are 16 loops in every mesh round
  • The cuff and ring each have 20 sc
  • There are 8 leaves, all 6 sts wide at the base
  • There are 36 seeds, staggered as described
  • The strap is sewn at opposite sides (sts 1 and 25)
  • The ring is centered and the hole is open
  • No ends show through the mesh

Troubleshooting

The mesh twists in a spiral. Always sl st to the center of the loop before you start a new round, and join every round. Don’t work in a continuous spiral.

The body flares instead of narrowing. Your chains are too loose. Check that you are actually changing from ch 5 to ch 4 to ch 3 at Rnds 11 and 17.

The cuff ruffles. You probably added the extra sts in Rnd 23 twice. Count again; Rnd 23 should have 20 sc.

The leaves curl up. This is normal before blocking. Block them flat and pin the tips.

The collar doesn’t fit the rim. Count both pieces. They must each have 48 sts.

The seeds slip sideways. Wrap them around the sc anchor, not the chain loop, and anchor the yarn at the back.

Care

Hand wash or machine wash on a gentle cycle in cool water, then reshape and lay flat to dry. Don’t tumble dry, because the leaves will curl and the mesh will stretch.

Coral crocheted strawberry with white bead seeds and green leaves hanging from wooden hook against cream wall.

Final Notes

All the measurements build on each other:

  • Gauge is 16 sc = 4 in (10.2 cm), so 48 foundation sts make a 6 in (15.2 cm) top.
  • Those 48 sts divide evenly into 16 mesh loops, and making the loops shorter makes the body narrower.
  • The cuff closes at 20 sts, matching the 20-st ring.
  • The 48-st border matches the 48-st collar, which carries 8 leaves of 6 sts each.

If you check your gauge on the ring first, the body, collar and ring will all fit together.

Happy crocheting!

Leave a Comment