Gingerbread Holly Coaster Set Crochet Pattern

This set looks like a plate of iced gingerbread cookies. Each round coaster has a warm cinnamon-brown center and a ring of cream scallops that looks like piped icing. Small green leaves are tucked between the scallops, and four burgundy berry clusters sit at 12, 3, 6, and 9 o’clock. The coasters stack inside a matching round holder with a U-shaped front opening, cream trim, and two holly sprigs.

The set uses four colors: cinnamon brown, cream, holly green, and burgundy. The style is rustic and cozy, so it works well on a Christmas coffee table or in a hostess gift basket.

This pattern uses US crochet terms. Each finished coaster is 4.25 in (10.8 cm) across. The holder is 4.75 in (12.1 cm) across the outside and 2.5 in (6.4 cm) tall.

Each coaster starts as a flat single crochet spiral worked in the round. You then add one cream scallop round and a three-round brown border that ends in a corded reverse single crochet edge. The leaves are embroidered, and the berries are small popcorn stitches sewn on at the end. The holder is a single crochet basket. It has a back-loop turn for the wall, a cream band at the base, walls worked in rows to leave the U opening, and one continuous round of cream trim.

Finished Size and Construction

  • Coaster size: 4.25 in (10.8 cm) diameter
  • Holder size: 4.75 in (12.1 cm) outside diameter, 2.5 in (6.4 cm) tall
  • Skill level: Easy-intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.0 mm (G-6)
  • Number of pieces: 6 coasters and 1 holder (7 separate crocheted pieces), plus small appliqués
  • Layout: The pieces are not joined to each other. The coasters stack inside the holder.
  • Coaster size before border: 3.75 in (9.5 cm) across the scallop tips (after Rnd 9)
  • Border depth: 0.25 in (0.6 cm) per side (Rnds 10–12)

Materials

Use a smooth worsted yarn made of 100% cotton. Cotton soaks up drips, keeps its shape under a hot mug, and shows the scallops clearly. Avoid acrylic, because it can soften under heat. Buy all four colors from the same yarn line so the gauge matches.

  • Cinnamon brown: 100 g, about 160 m
  • Cream: 35 g, about 56 m
  • Holly green: 10 g, about 16 m
  • Burgundy: 15 g, about 24 m

These amounts cover the full set of 6 coasters and 1 holder. They include about 20% extra for swatching and tails.

Tools: 4.0 mm (G-6) hook, tapestry needle, stitch markers, scissors, ruler or tape measure, blocking mat, rust-proof pins, spray bottle.

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • sc2tog: single crochet 2 together
  • BLO: back loop only
  • MR: magic ring
  • sk: skip
  • st(s): stitch(es)
  • rev sc: reverse single crochet (crab stitch). Work from left to right: insert the hook in the next stitch to the right, yarn over, pull up a loop, yarn over, and pull through both loops.
  • picot: ch 2, then sl st into the top of the stitch just made.

Special stitch: popcorn berry. Make a MR, ch 2, and work 4 dc into the ring. Pull the ring closed. Take the hook out of the loop, insert it in the top of the ch-2, pick up the dropped loop, and pull it through. Ch 1 to close. Fasten off and leave a 6 in (15.2 cm) tail. Each berry is about 0.4 in (1.0 cm) across.

Gauge and Checkpoints

Gauge is 15 sc and 16 rounds = 3 in (7.6 cm). The easiest way to check gauge is to make one coaster center first.

Test piece: Work Rnds 1–8 of the coaster. It should measure 3 in (7.6 cm) across.

Checkpoints:
– After Rnd 8: 3 in (7.6 cm)
– After Rnd 9: 3.75 in (9.5 cm) across the scallop tips
– After Rnd 11: about 4 in (10.2 cm)
– After Rnd 12: 4.25 in (10.8 cm)
– Holder base after Rnd 12: 4.5 in (11.4 cm)

If your circle is too big, use a hook 0.5 mm smaller. If it’s too small, use a hook 0.5 mm larger. If the circle cups, your increases are too tight, so loosen your tension or go up a hook size. If it ruffles, go down a hook size. Don’t add or remove rounds, because the scallop round needs exactly 48 stitches.

Crocheted circular coaster in caramel tan with cream scalloped border, decorated with deep red berries and green leaves.

Coaster (Make 6)

Work every round with the right side facing you. At the end of each round, join with a sl st to the first st. The ch 1 at the start of a round does not count as a stitch.

Center (brown):

Rnd 1: MR, ch 1, 6 sc in ring, join. (6 sts)

Rnd 2: Ch 1, 2 sc in each st, join. (12 sts)

Rnd 3: Ch 1, [sc in next st, 2 sc in next st] 6 times, join. (18 sts)

Rnd 4: Ch 1, [sc in next 2 sts, 2 sc in next st] 6 times, join. (24 sts)

Rnd 5: Ch 1, [sc in next 3 sts, 2 sc in next st] 6 times, join. (30 sts)

Rnd 6: Ch 1, [sc in next 4 sts, 2 sc in next st] 6 times, join. (36 sts)

Rnd 7: Ch 1, [sc in next 5 sts, 2 sc in next st] 6 times, join. (42 sts)

Rnd 8: Ch 1, [sc in next 6 sts, 2 sc in next st] 6 times, join. Fasten off. (48 sts)

Checkpoint: 3 in (7.6 cm).

Icing scallops (cream):

Rnd 9: Join cream in any st. Ch 1 and sc in the same st. Sk 1 st, 5 dc in next st, sk 1 st, sc in next st. Repeat from * to * 10 more times. Then sk 1 st, 5 dc in next st, sk 1 st, and join to the first sc. Fasten off. (12 scallops; 12 sc + 60 dc = 72 sts)

Each scallop uses 4 stitches of Rnd 8. Since 12 × 4 = 48, the scallops space out evenly with no gap. Checkpoint: 3.75 in (9.5 cm) across the tips.

Green leaves: Thread a tapestry needle with green. At each of the 12 dips between scallops, embroider one lazy daisy (detached chain) stitch on Rnd 8, about 0.25 in (0.6 cm) long and pointing toward the center. (12 leaves)

Border

The brown border fills in the dips between scallops, adds one flat round, and ends with a corded edge. Border gauge is the same as the main gauge: 15 sc = 3 in (7.6 cm).

Rnd 10 (fill round, brown): Join brown in any sc between two scallops. Ch 3 (counts as dc). Sk next dc, hdc in next dc, 2 sc in next (center) dc, hdc in next dc, sk next dc, then dc in the next sc. Repeat from * around. On the last repeat, stop after “sk next dc” and join to the top of the ch-3. (5 sts per scallop × 12 = 60 sts)

Rnd 11: Ch 1, sc in each st, join. (60 sts) Checkpoint: about 4 in (10.2 cm).

Rnd 12: Ch 1, rev sc in each st, join. Fasten off. (60 sts)

Why the math works: Rnd 9 sits about 1.9 in (4.8 cm) from the center, so its circumference is about 12 in (30.5 cm). At 5 sc per inch, a flat round at that size needs about 60 stitches. The fill round turns each scallop repeat into 5 border stitches: 1 dc + 1 hdc + 2 sc + 1 hdc, with 2 dc skipped. That gives exactly 60. The dc in each dip comes up to the height of the scallops, so Rnd 11 starts on a level edge. Rnds 11–12 add the final 0.25 in (0.6 cm) on each side.

Berries: Make 12 burgundy popcorn berries for each coaster.

Holder

Base (brown): Work Rnds 1–8 the same as for the coaster, but don’t fasten off. Then continue:

Rnd 9: Ch 1, [sc in next 7 sts, 2 sc in next st] 6 times, join. (54 sts)

Rnd 10: Ch 1, [sc in next 8 sts, 2 sc in next st] 6 times, join. (60 sts)

Rnd 11: Ch 1, [sc in next 9 sts, 2 sc in next st] 6 times, join. (66 sts)

Rnd 12: Ch 1, [sc in next 10 sts, 2 sc in next st] 6 times, join. Fasten off. (72 sts)

Checkpoint: 4.5 in (11.4 cm).

Base band (cream):

Rnd 13: Join cream. Ch 1, sc in BLO of each st, join. (72 sts) This round turns the work upward to start the wall.

Rnd 14: Ch 1, sc in each st, join. Fasten off. (72 sts)

Lower wall (brown):

Rnds 15–16: Join brown. Ch 1, sc in each st, join. (72 sts)

U opening (worked in rows): Mark the center front st of Rnd 16. Count out 9 sts on each side of the marker and mark those 18 sts. They form the bottom of the opening and stay unworked.

Row 17: Join brown in the first st after the opening. Ch 1, sc in next 54 sts, turn. (54 sts)

Rows 18–24: Ch 1, sc in each st, turn. (54 sts) Fasten off after Row 24.

The wall is now 12 rounds and rows tall, or 2.25 in (5.7 cm). The U is 8 rows deep, which is 1.5 in (3.8 cm), and 18 sts wide, about 3.5 in (8.9 cm) along the curve. Below the U, the front wall is 4 rounds tall, or 0.75 in (1.9 cm).

Top trim (cream):

Rnd 25: Join cream in the first st of Row 24, which is one top corner of the U. Ch 1. Work 2 sc in the same st, sc in the next 52 sts, then 2 sc in the last st (56 sts across the top). Go down the first side of the U: sc in each of the 7 row-ends from Row 24 to Row 18, then sc2tog over the Row 17 row-end and the first opening st of Rnd 16. Sc in the next 16 opening sts. Sc2tog over the last opening st and the Row 17 row-end on the other side. Sc in each of the 7 row-ends going up. Join. (56 + 7 + 1 + 16 + 1 + 7 = 88 sts)

Rnd 26: Ch 1, rev sc in each st, join. Fasten off. (88 sts)

The extra sc at the two outer corners keeps them square. The sc2tog at the two inner corners keeps the bottom of the U from rippling. With the trim, the holder is 2.5 in (6.4 cm) tall.

Holly leaf (make 4, green): Ch 7. Working in the back bumps and starting in the 2nd ch from the hook: sl st, sc, hdc + picot, dc, hdc + picot, then 3 sc in the last ch. Turn the piece and work along the other side of the chain: hdc + picot, dc, hdc + picot, sc, sl st. Join to the first sl st and fasten off. Each leaf is 1.2 in (3.0 cm) long.

Holder berries: Make 6 popcorn berries.

Make All Pieces

What you need for the whole set:
– Brown: 6 coaster centers and borders, plus the holder base, lower wall, and U section
– Cream: 6 scallop rounds, plus the holder base band and top trim
– Green: 72 embroidered coaster leaves and 4 holly leaves
– Burgundy: 72 coaster berries + 6 holder berries = 78 berries

Berry layout on each coaster (scallops numbered clockwise from the top):

            [S1 ●●●]
      S12            S2
   S11                  S3
 [S10 ●●●]          [S4 ●●●]
   S9                   S5
      S8             S6
            [S7 ●●●]

Holder layout (front view):

 [holly] |    U opening    | [holly]
 brown   |_________________|  brown
 =========== cream band ===========

Assembly: Sewing the Appliqués

None of the pieces are sewn to each other. The coasters and holder stay separate, and the only assembly is sewing on the appliqués.

Coaster berries: Sew 3 berries in a small triangle, centered over scallops S1, S4, S7, and S10. Use the berry tails to stitch through the cream scallop and into Rnd 8. Bring the tails to the back and weave them into the brown stitches.

Holder holly: Center one sprig on the brown wall on each side of the U, about 0.75 in (1.9 cm) from the cream trim. Sew the 2 leaves in a V with their bases touching. Then sew the 3 berries over the base of the V.

Tension: Make small stitches through the back loops only. Don’t pull them tight, or the fabric will pucker. The appliqués should lie flat with no dents around them.

Checkpoint: each coaster still measures 4.25 in (10.8 cm) and lies flat.

Final Blocking

  1. Weave in all ends.
  2. Pin each coaster out to a 4.25 in (10.8 cm) circle, with one pin at each of the 12 scallops.
  3. Mist with water until damp but not soaked.
  4. Gently shape each cream scallop into an even curve.
  5. Let the coasters dry completely, for at least 12 hours.
  6. Fill the holder with a firmly rolled towel to shape it to 4.75 in (12.1 cm). Pin the sides of the U so they stand straight.
  7. Mist the holder and let it dry standing on its base.

Final Quality-Control Checklist

  • Each coaster measures 4.25 in (10.8 cm) and lies flat.
  • Each coaster has 12 even scallops and 12 green leaves.
  • Berry clusters sit at 12, 3, 6, and 9 o’clock.
  • The rev sc edge is even, with no gaps.
  • The holder base measures 4.5 in (11.4 cm), and the walls stand upright.
  • The U opening is centered and has straight sides.
  • The two holly sprigs are level and match each other.
  • All 6 coasters fit in the holder without being squeezed.
  • No loose tails show on the front.

Troubleshooting

  • Scallops crowd or overlap: Rnd 8 doesn’t have 48 sts. Recount and redo it.
  • Coaster ruffles after Rnd 10: You probably worked into a dc that should be skipped. Check that each scallop has 5 sts.
  • Coaster cups: Your tension is tight. Use a hook 0.5 mm larger for Rnds 10–12.
  • Holder walls lean outward: Rnd 13 wasn’t worked in the BLO. Redo that round.
  • U corners ripple: Check that you worked the sc2tog at both inner corners.
  • Coasters don’t fit: The holder base is too small. Measure it again after Rnd 12.
  • Berries look flat: Pull the popcorn closure tight before fastening off.

Care

Hand wash in cool water, reshape while damp, and dry flat. Don’t use the dryer, because it makes the cream scallops fuzzy and shrinks cotton.

Crocheted tan and cream coasters with holly details styled beside a decorated Christmas tree with golden fairy lights and ornaments.

Final Notes

Here is the measurement chain. After Rnd 8, the coaster center has 48 sts and measures 3 in (7.6 cm). The scallops bring it to 3.75 in (9.5 cm), and the 60-stitch border brings it to the final 4.25 in (10.8 cm). The holder base has 72 sts and measures 4.5 in (11.4 cm). Its walls are 2.25 in (5.7 cm) tall before trim and 2.5 in (6.4 cm) after. If your first coaster matches every checkpoint, the other five and the holder will fit together as planned.

Happy crocheting!

Leave a Comment