The Evergreen Star Coaster Set is six lacy round coasters and a matching round holder. Each coaster has a cream six-point star in the middle, then a sage-green chain mesh, then a solid forest-green border with small scallops.
The holder uses the same colors. It has a solid forest-green base and an open sage lattice wall with five small cream flowers sewn on. There’s a U-shaped front opening, and a twisted cream rope edge runs along the top and around the base. The style is cozy and woodland-inspired, and the set suits winter tables.
This pattern uses US crochet terms. A finished coaster measures 5.25 in (13.3 cm) across. The holder measures 5.75 in (14.6 cm) across the base and stands about 3 in (7.6 cm) tall.
Each coaster is worked in the round from the center out: the star, then the mesh, then the border. The holder base is a flat circle, and the wall grows straight up from it. You work the wall in rounds first, then in rows to leave the front opening.
Finished Size and Construction
- Coaster size: 5.25 in (13.3 cm) diameter
- Holder size: 5.75 in (14.6 cm) base diameter, about 3 in (7.6 cm) tall
- Skill level: Intermediate
- Terminology: US
- Yarn weight: DK / light worsted cotton (size 3)
- Hook: 3.0 mm
- Number of pieces: 6 coasters, 1 holder (base and wall in one piece), 5 flower appliqués
- Layout: the coasters stack loose inside the holder. Only the flowers get sewn on.
- Coaster size before border: 4 in (10.2 cm)
- Coaster border depth: 0.625 in (1.6 cm) per side, 3 rounds
Materials
Use a smooth mercerized or combed DK cotton, about 120 m per 50 g. Cotton handles heat and washing well and shows stitch texture clearly.
- Color A, Cream: 50 g, about 120 m (stars, holder edging, flowers)
- Color B, Forest Green: 75 g, about 180 m (coaster borders, holder base)
- Color C, Sage Green: 50 g, about 120 m (coaster mesh, holder lattice)
Tools:
- 3.0 mm crochet hook
- Tapestry needle
- Scissors
- 6 stitch markers
- Rust-proof pins and a blocking board
- Spray bottle
- Tape measure
The quantities include a margin of about 15% for gauge differences.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- BLO / FLO – back loop only / front loop only
- rev sc – reverse single crochet (crab stitch)
- sp – space
- st(s) – stitch(es)
- RS / WS – right side / wrong side
Picot: ch 3, sl st in 3rd ch from hook.
Petal: all in the same ch sp, work (sc, hdc, 2 dc, tr, picot, tr, 2 dc, hdc, sc). That’s 10 sts plus 1 picot.
Rev sc: work sc from left to right (right-handed), inserting the hook into the next stitch to the right. This makes a twisted rope edge.
Gauge and Checkpoints
Gauge: 20 sc and 21 rows = 4 in (10.2 cm) with Color B, which is 5 sc per 1 in (2.5 cm).
Make one complete coaster first as your real gauge test. Check these measurements:
- After Round 2: 1.5 in (3.8 cm)
- After Round 4: 3 in (7.6 cm) from tip to tip
- After Round 7: 4 in (10.2 cm)
- After Round 9: 4.6 in (11.7 cm)
- After Round 10: 5.25 in (13.3 cm)
If the coaster is more than 0.25 in (0.6 cm) too big, change to a 2.75 mm hook. If it’s too small, change to a 3.25 mm hook. If the mesh ruffles, your chains are too loose. If it pulls the star into a cup, your chains are too tight. Fix your tension rather than changing the chain counts.

Coaster (Make 6)
Star Center (Color A)
Round 1: Make a magic ring. Ch 3 (counts as dc), then work 11 dc in the ring. Pull the ring snug but leave a small hole. Join with a sl st to the top of the ch-3. (12 dc)
Round 2: Ch 3 (counts as dc), dc in same st, 2 dc in each st around. Join. (24 dc)
Round 3: Ch 1, sc in same st, *ch 7, skip 3 sts, sc in next st; repeat from * 4 more times, ch 7, skip 3 sts, join to first sc. (6 sc, 6 ch-7 sps)
These 6 anchor sc sit between the star points.
Round 4: Sl st into the first ch-7 sp. Work 1 Petal in each ch-7 sp around. Join to first sc. Fasten off. (6 petals: 60 sts and 6 picots)
Each petal fans over its arch and rises to a pointed tr-and-picot tip. The arch underneath leaves an open line down the center of each petal. Check: 3 in (7.6 cm) from tip to tip.
Mesh (Color C)
Round 5: Join C with a sc in any picot. *Ch 7, then sc between petals: insert the hook around the Round 3 anchor sc, between the last sc of this petal and the first sc of the next. Ch 7, sc in next picot. Repeat from * around, leaving out the final sc. Join to first sc. (12 sc, 12 ch-7 loops)
These loops form the green V-shapes between the star points.
Round 6: Sl st in next 4 ch to reach the center of the loop. Ch 1, sc in same loop, *ch 7, sc in next loop; repeat from * 10 more times, ch 7, join. (12 sc, 12 ch-7 loops)
Round 7: Sl st in next 4 ch. Ch 1, sc in same loop, *ch 8, sc in next loop; repeat from * 10 more times, ch 8, join. Fasten off. (12 sc, 12 ch-8 loops)
Each round is offset by half a loop, so the arches overlap into an interlaced-ring mesh. Check: 4 in (10.2 cm). You’ll work the border later, in the Border section.
Holder
Base (Color B)
Round 1: Magic ring, ch 1, 6 sc in ring. Join. (6 sc)
Round 2: Ch 1, 2 sc in each st. Join. (12 sc)
Round 3: Ch 1, *sc in next st, 2 sc in next st; repeat from * around. Join. (18 sc)
Rounds 4–15: Keep increasing 6 sts evenly per round, with 1 more sc between increases each round. Stagger the increases. Each round’s total is 6 times its round number: Round 5 has 30 sc, Round 10 has 60 sc, and Round 15 has 90 sc.
Check: 5.75 in (14.6 cm). That’s 0.5 in (1.3 cm) wider than a coaster.
Wall Band (Color B)
Round 16: Ch 1, sc in BLO of each st around. Join. (90 sc)
This turns the wall upward and leaves the Round 15 front loops free for the bottom rim.
Rounds 17–18: Ch 1, sc in each st. Join. (90 sc) Fasten off.
Place a marker in any st of Round 18. The marked st plus the next 72 sts make the 73 wall sts. The remaining 17 sts form the bottom of the opening.
Lattice Wall (Color C, rows)
Row 1 (RS): Join C with a sc in the marked st. *Ch 4, skip 3 sts, sc in next st; repeat from * 17 more times. (19 sc, 18 ch-4 loops over 73 sts)
Row 2 (WS): Ch 1, turn. Sc in first sc, ch 2, sc in first loop, *ch 4, sc in next loop; repeat from * 16 more times, ch 2, sc in last sc. (17 ch-4 loops, 2 ch-2 sps)
Row 3: Ch 1, turn. Sc in first sc, skip the ch-2 sp, *ch 4, sc in next ch-4 loop; repeat from * 16 more times, ch 4, sc in last sc. (18 ch-4 loops)
Rows 4–7: Repeat Rows 2 and 3 twice.
Row 8 (WS): Ch 1, turn. Sc in first sc, *3 sc in next loop, sc in next sc; repeat from * across. (1 + 18 × 4 = 73 sc) Fasten off.
Check: the wall measures about 2.2 in (5.6 cm) from Round 16 to Row 8.
Make All Pieces
Color totals by piece:
- 6 coasters: about 24 g Color A, 36 g Color B, 24 g Color C
- Holder: about 10 g Color A, 20 g Color B, 12 g Color C
- 5 flowers: about 3 g Color A
Flower Appliqué (make 5, Color A)
Round 1: Magic ring, ch 1, 6 sc in ring. Join. (6 sc)
Round 2: *Ch 5, sl st in 2nd ch from hook, sc in next ch, hdc in next ch, dc in next ch, sl st in next sc; repeat from * 5 more times. Fasten off, leaving a 10 in (25.4 cm) tail. (6 pointed petals)
Each flower measures about 1.5 in (3.8 cm) across.
Flower placement along the wall. The numbers are Row 1 stitch positions; flowers are 15 sts, or 3 in (7.6 cm), apart:
| opening | st 7 | st 22 | st 37 | st 52 | st 67 | opening |
| | F | F | F | F | F | |
The opening is 17 sts, about 3.4 in (8.6 cm). Center each flower vertically between Row 2 and Row 6.
Joining
Only the flowers are joined. The coasters stay separate, and the holder is already one piece.
Pin each flower RS out in its spot. Use the tail to tack each petal tip to the nearest lattice sc, then make 2 small stitches through the center ring. That’s 6 tip tacks plus the center for each flower.
Keep the tension relaxed. The flower should lie flat without pulling the loops inward. If a loop puckers, loosen that tack.
Checkpoint: before edging, the top edge should still measure about 14.6 in (37.1 cm), since 73 sts ÷ 5 sts per inch = 14.6 in.
Border
The border gauge matches the main gauge: 5 sc per 1 in (2.5 cm).
Coaster Border (Color B)
Round 8: Join B in any ch-8 loop. Ch 1, 6 sc in each loop around. Join. (12 × 6 = 72 sc)
Round 9: Ch 1, sc in each st. Join. (72 sc) Check: 4.6 in (11.7 cm).
Round 10: Ch 1, *sc in next st, skip 1 st, 5 dc in next st, skip 1 st; repeat from * 17 more times. Join to first sc. Fasten off. (18 scallops: 18 sc + 90 dc = 108 sts)
Why the math works: 12 loops × 6 sc = 72 sts. Each scallop uses 4 sts, and 72 ÷ 4 = 18 exactly, so the round closes evenly. Packing 6 sc into each ch-8 loop firms up the mesh, so the border lies flat.
Holder Edging (Color A)
Round 1: Join A in the first sc of Row 8 and work around the whole U in one round:
- Top edge: 3 sc in first st, sc in next 71 sts, 3 sc in last st. (77 sc)
- Down the side: 2 sc in each of the 7 lattice row-ends, plus 1 sc in the Row 8 row-end. (15 sc)
- Bottom of the opening: sc in each of the 17 free sts of Round 18. (17 sc)
- Up the other side: same as the first side. (15 sc)
Join. (77 + 15 + 17 + 15 = 124 sc)
Round 2: Ch 1, rev sc in each st around. Join. Fasten off. (124 rev sc)
Bottom Rim: Turn the holder upside down. Join A in any free front loop of Round 15. Ch 1, sc in each front loop around. Join. (90 sc) Ch 1, rev sc in each st. Join. Fasten off. (90 rev sc)
Final Blocking
- Weave in all ends through stitches of the same color.
- Pin each coaster RS up to 5.25 in (13.3 cm), pinning each star tip, mesh loop, and scallop.
- Spray until damp, not soaked.
- Shape each mesh loop into a round arch with your fingers.
- Let everything dry completely, at least 6 hours.
- Put a 5.75 in (14.6 cm) jar or a rolled towel inside the holder. Shape the wall upright, spray lightly, and let it dry on the form.
Final Quality-Control Checklist
- All 6 coasters measure 5.25 in (13.3 cm), within 0.125 in (0.3 cm).
- Each coaster has 6 star points, 12 loops per mesh round, and 18 scallops.
- The coasters lie flat without cupping or ruffling.
- The holder base measures 5.75 in (14.6 cm) and sits flat.
- The wall stands upright with an even top edge.
- All five flowers are evenly spaced and tacked down at every tip.
- The cream rope edge is unbroken around the U and the base.
- The stack of coasters slides in and out freely.
Troubleshooting
- Star cups upward: Your Round 3 chains are tight. Chain more loosely.
- Mesh ruffles: Your chains are loose. Tighten your chain tension.
- Scallops don’t come out even: Recount Round 9. It must have 72 sts.
- Base curls: Your tension is tight or your increases are stacked. Stagger the increases or go up one hook size.
- Wall leans outward: Redo Round 16 strictly in BLO.
- Opening edge flares: Work 1 sc per lattice row-end instead of 2.
Care
Hand wash in cool water with mild soap. Reshape while damp, lay flat to dry, and don’t tumble dry.

Final Notes
Gauge sets the 1.5 in (3.8 cm) center, which leads to the 3 in (7.6 cm) star and the 4 in (10.2 cm) mesh. The 72 border sts bring the coaster to 4.6 in (11.7 cm), and the 18 scallops finish it at 5.25 in (13.3 cm). The 90-st base at 5.75 in (14.6 cm) leaves 0.25 in (0.6 cm) of clearance on each side, so the stack slides in and out easily.
Happy crocheting!