The Willow Braid Basket is a small oval caddy that hangs from a wall hook and holds two spare toilet rolls. Its main feature is a raised cable band around the middle of the wall. Front post treble crochet stitches cross in alternating directions, so the band looks like a soft, chunky plait.
The palette is calm and works in most bathrooms. The base, the walls and the braid are light heather gray, and a cream accent round and a cream scalloped rim brighten the top. A thin gray cord and a natural wooden dowel finish the hanging setup.
This pattern uses US crochet terms. The finished basket measures 9.75 in (24.8 cm) long, 4.5 in (11.4 cm) wide and 4.75 in (12.1 cm) tall.
The basket is worked in one piece from the bottom up. You crochet a single crochet oval base, turn up the walls with a back-loop round, work the cable band, and finish with the cream rim. The hanging strap is then worked directly onto the rim, and you wrap it around the dowel.
Finished Size and Construction
- Finished size: 9.75 in (24.8 cm) long × 4.5 in (11.4 cm) wide × 4.75 in (12.1 cm) tall
- Skill level: Intermediate (post stitches and cable crossings)
- Terminology: US crochet terms
- Yarn weight: Worsted (#4)
- Hook: 5.0 mm (H-8)
- Number of pieces: 1 (basket body with the strap worked directly onto it)
- Layout: Single oval basket, not assembled from motifs
- Base size: 9.75 in × 4.5 in (24.8 × 11.4 cm), 96 sts around
- Wall height before rim: 3.75 in (9.5 cm)
- Rim depth: 1 in (2.5 cm)
- Strap length: 21 in (53.3 cm) from end to end
Materials
Use a smooth worsted-weight yarn with good stitch definition. Cotton or a cotton blend holds the basket’s shape best and copes well with bathroom humidity. A soft acrylic also works, but the walls will be slightly floppier.
- Light heather gray: 200 g / 380 m
- Cream: 35 g / 65 m
These quantities include a safety margin of about 15%. Cable rounds use far more yarn than plain rounds.
Tools:
– 5.0 mm (H-8) crochet hook
– Wooden dowel, 10 in (25.4 cm) long and 0.5 in (1.3 cm) in diameter
– Stitch marker
– Tapestry needle
– Scissors
– Measuring tape
– A small box or a folded towel for blocking
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- BLO – back loop only
- st(s) – stitch(es)
- rnd(s) – round(s)
- inc – 2 sc in the same st
- FPtr – front post treble crochet: yarn over twice, insert the hook from front to back to front around the post of the st, yarn over and pull up a loop, then [yarn over and pull through 2 loops] 3 times.
- Front cross (6-st): skip the next 3 sts, FPtr around each of the next 3 sts, then work in front of the 3 sts you just made and FPtr around each of the 3 skipped sts.
- Back cross (6-st): work the same as the front cross, but pass behind the 3 sts you just made when you work the skipped sts.
Gauge and Checkpoints
Gauge: 16 sc × 16 rnds = 4 in (10.2 cm) square. In this gauge one sc round is 0.25 in (0.6 cm) tall and a dc round is 0.5 in (1.3 cm) tall. Together, the 3 cable rounds add about 1.75 in (4.4 cm).
Treat the base as your gauge test and check it before you start the walls:
- After Rnd 5: 7.75 in × 2.5 in (19.7 × 6.4 cm)
- After Rnd 9: 9.75 in × 4.5 in (24.8 × 11.4 cm), with 96 sts
- After Rnd 14: walls 1.25 in (3.2 cm) tall
- After Rnd 18: walls 3.5 in (8.9 cm) tall
- After Rnd 21: walls 4.25 in (10.8 cm) tall
- Finished: 4.75 in (12.1 cm) tall
If your base is too big, go down a hook size, to 4.5 mm. If it is too small, go up to 5.5 mm. The basket must fit two rolls, so don’t skip this step.
If the base ruffles, your increases are too loose. If it cups, your tension is too tight. In either case, check your hook size before you change any stitch counts.

Base
The base is a sc oval. Each straight side has 21 sts, and each rounded end grows by 3 sts per round, so every round adds 6 sts in total.
Don’t turn between rounds. Join each round with a sl st to the first sc. The ch 1 at the start of a round does not count as a stitch.
Foundation: With gray, ch 24.
Rnd 1: Work 3 sc in the 2nd ch from the hook (end A). Sc in each of the next 21 ch, then work 3 sc in the last ch (end B). Rotate the work and sc in the remaining loop of each of the same 21 middle ch. Join. (48 sts: 3 per end, 21 per side)
From here on, each round begins at the first st of end A.
Rnd 2: Ch 1, [2 sc in each of the next 3 sts, sc in each of the next 21 sts] twice, join. (54 sts: 6 per end)
Rnd 3: Ch 1, [(sc in next st, inc) 3 times, sc in each of the next 21 sts] twice, join. (60 sts: 9 per end)
Rnd 4: Ch 1, [(sc in each of next 2 sts, inc) 3 times, sc in each of the next 21 sts] twice, join. (66 sts: 12 per end)
Rnd 5: Ch 1, [(sc in each of next 3 sts, inc) 3 times, sc in each of the next 21 sts] twice, join. (72 sts: 15 per end)
Rnd 6: Ch 1, [(sc in each of next 4 sts, inc) 3 times, sc in each of the next 21 sts] twice, join. (78 sts: 18 per end)
Rnd 7: Ch 1, [(sc in each of next 5 sts, inc) 3 times, sc in each of the next 21 sts] twice, join. (84 sts: 21 per end)
Rnd 8: Ch 1, [(sc in each of next 6 sts, inc) 3 times, sc in each of the next 21 sts] twice, join. (90 sts: 24 per end)
Rnd 9: Ch 1, [(sc in each of next 7 sts, inc) 3 times, sc in each of the next 21 sts] twice, join. (96 sts: 27 per end, 21 per side)
Check the size: the base should measure 9.75 in × 4.5 in (24.8 × 11.4 cm).
From now on, the stitches are numbered within each round:
– Sts 1–27: end A
– Sts 28–48: first long side
– Sts 49–75: end B
– Sts 76–96: second long side
Walls
Rnd 10 (turning round): Ch 1, sc in the BLO of each st, join. (96 sts) This makes a crisp fold where the base meets the walls.
Rnds 11–14: Ch 1, sc in each st, join. (96 sts per round)
The walls should now be 1.25 in (3.2 cm) tall.
Rnd 15 (cable foundation): Ch 2 (does not count as a st), dc in each st, join to the first dc. (96 sts)
Braid Band
All three cable rounds use 6-st crosses. Since 96 ÷ 6 = 16, each round has exactly 16 crosses.
Rnd 17 starts 3 sts later than Rnd 16, so its crosses sit between the crosses below. Rnd 18 shifts by 3 sts again and lines up with Rnd 16. Alternating front and back crosses this way creates the braid.
Rnd 16: Ch 2 (does not count), work a front cross 16 times, join to the top of the first FPtr. (96 FPtr)
Rnd 17: Sl st in each of the next 3 sts. These sl sts only move the starting point and are not counted. Ch 2, then work a back cross 16 times and join. (96 FPtr)
In the last back cross, the “next 3 sts” are the posts under your starting sl sts.
Rnd 18: Sl st in each of the next 3 sts, ch 2, work a front cross 16 times, join. (96 FPtr)
The walls should now be 3.5 in (8.9 cm) tall.
Rnd 19: Ch 1, sc in the top of each st, join. (96 sts: 27, 21, 27, 21) The walls now measure 3.75 in (9.5 cm). Fasten off the gray.
Rim (Border)
Rim gauge: This is the same as the body gauge, 4 sc per 1 in (2.5 cm). The two sc rounds add 0.25 in (0.6 cm) each, and the scallop round adds 0.5 in (1.3 cm), for a total of 1 in (2.5 cm).
Rnd 20: Join cream in st 1. Ch 1, sc in each st and join. (96 sts: 27 per end, 21 per long side) Fasten off the cream.
Rnd 21: Join gray in st 1. Ch 1, sc in each st and join. (96 sts: 27 per end, 21 per long side) Fasten off the gray.
Rnd 22 (scallops): Join cream in st 1. Ch 1 and sc in st 1. Then skip 2 sts, 5 dc in the next st, skip 2 sts, sc in the next st. Repeat from * 15 more times, ending the last repeat with “skip 2 sts” and joining to the first sc. (16 shells and 16 sc) Fasten off.
Why the math works:
– Each scallop uses 6 sts (sc, 2 skipped, shell, 2 skipped), and 96 ÷ 6 = 16 shells, so the rim closes evenly with no partial repeat.
– The scallop pattern runs continuously around the rim and does not need to fit each side separately.
– Each round’s side counts (27 + 21 + 27 + 21) add up to 96, so no corner stitches are counted twice.
Hanging Strap
The strap is attached at the center of each short end:
– End A: st 14 of Rnd 21
– End B: st 62 of Rnd 21
Neither stitch has a scallop worked into it. Work the strap from the inside of the basket so the joins sit behind the scallops.
- Join gray with a sl st through st 14 of Rnd 21.
- Ch 84. Keep the chain untwisted and sl st through st 62 of Rnd 21.
- Turn and sl st in the back bump of each ch, back toward end A. (84 sl sts)
- Sl st through st 14 again and fasten off.
Checkpoint: At about 4 ch per 1 in (2.5 cm), the strap should be about 21 in (53.3 cm) long.
To add the dowel:
1. Measure 3.5 in (8.9 cm) up the strap from each end.
2. At that point, wrap the strap once around the dowel, 0.75 in (1.9 cm) in from the dowel’s end.
3. Tack each wrap in place with gray yarn.
Each wrap uses about 1.6 in (4.1 cm) of strap, which leaves about 5.5 in (14.0 cm) on each side to reach the peak.
Final Blocking
- Weave in all ends on the inside of the basket, following the stitch direction.
- Lightly spray the basket with water until it is damp but not soaked.
- Slide it over a box or a rolled towel about 9.75 in × 4.5 in (24.8 × 11.4 cm).
- Shape the base flat and the walls straight up. Press the braid so the crosses sit evenly.
- Pinch each cream scallop into an even curve.
- Let it dry completely before you remove the form.
- Hang the basket and check that the dowel sits level. If it doesn’t, move one strap wrap slightly.
Final Quality-Control Checklist
- The base measures 9.75 in × 4.5 in (24.8 × 11.4 cm) and lies flat.
- Every round from Rnd 10 to Rnd 21 has 96 sts.
- Each cable round has 16 crosses, and Rnd 17’s crosses sit offset between the crosses below.
- There are 16 even scallops around the rim.
- The walls stand 4.75 in (12.1 cm) tall.
- The strap is 21 in (53.3 cm) long and untwisted, with the dowel level.
- Two rolls fit side by side without stretching the basket out of shape.
Troubleshooting
- The base waves or ruffles: Use a smaller hook or tighten your increases.
- The base cups: Use a larger hook or loosen your tension.
- The walls flare outward: The sc rounds are too loose. Go down a hook size for Rnds 10–21.
- The braid looks flat: Pull up a full-height loop on each FPtr, and don’t skip the shift at the start of Rnd 17.
- The last cross won’t close: Your count is off. Recount Rnd 15 to confirm 96 sts.
- The scallops crowd or gap: Check that you skip exactly 2 sts on each side of each shell.
- The basket hangs crooked: Re-measure the 3.5 in (8.9 cm) wrap point on each side.
Care
Hand wash in cool water, press out the water gently and reshape the basket over its blocking form to dry flat. Don’t put it in the dryer, because heat can shrink cotton and distort the cables.

Final Notes
Each stage builds on the one before:
1. The gauge sets the base size, 9.75 in × 4.5 in (24.8 × 11.4 cm) with 96 sts.
2. Those 96 sts carry up the walls and through the 16 cable crosses.
3. The walls reach 3.75 in (9.5 cm) before the rim.
4. The 1 in (2.5 cm) rim brings the total height to 4.75 in (12.1 cm).
5. A 21 in (53.3 cm) strap and a 10 in (25.4 cm) dowel finish the hanger.
If each checkpoint matches, the finished basket will too. Happy crocheting!