The Rosy Bobble Hanging Basket is a small oval wall basket covered in plump bobbles. It is made in dusty rose with burgundy trim. Two straps with keyhole tops hang it from wall pegs, and wooden toggle buttons hold the straps on. It fits two standard toilet paper rolls side by side, and it works just as well for washcloths, cotton pads, hair ties, or small toys.
The style is cozy and a little vintage. A smooth single crochet base and lower wall lead into three bands of raised bobbles. The basket finishes with a burgundy rim in reverse single crochet that looks like a twisted cord. A thin burgundy band also runs around the bottom edge, which frames the bobble section neatly when the basket hangs at eye level.
This pattern uses US crochet terms. The finished basket measures about 10 in (25.4 cm) long, 5.5 in (14.0 cm) wide, and 4.5 in (11.4 cm) tall. Each strap measures about 1.75 in (4.4 cm) wide and 10.5 in (26.7 cm) long.
Construction is simple. You work the oval base in joined rounds, turn it into a wall with a back-loop round, and keep going up in rounds. Then you make two flat straps in rows, edge them, and attach them with toggles sewn inside the back wall. There’s no seaming between the base and the wall.
Finished Size and Construction
- Finished basket size: 10 in (25.4 cm) long × 5.5 in (14.0 cm) wide × 4.5 in (11.4 cm) tall
- Skill level: Easy-intermediate (bobbles, back-loop work, reverse single crochet)
- Terminology: US
- Yarn weight: Worsted (#4), cotton or a cotton blend preferred
- Hook: US H-8 (5.0 mm)
- Number of pieces: 3 crocheted pieces (1 basket, 2 straps) plus 2 toggle buttons
- Layout: Straps placed on the back straight side, 16 stitches apart
- Base size: 9.75 × 5 in (24.8 × 12.7 cm), 88 stitches around
- Size before rim trim: wall about 4 in (10.2 cm) tall
- Rim trim depth: 2 rounds, about 0.5 in (1.3 cm)
Materials
Pick a smooth, firm yarn. Cotton holds the oval shape best and shows the bobbles clearly. Acrylic works too, but the basket will be softer and may need a cardboard insert in the base.
- Color A, Dusty Rose: 150 g, about 270 m (body and straps)
- Color B, Burgundy: 30 g, about 55 m (base band and rim)
Both quantities include a margin of about 20% for your gauge check and small tension differences. The bobble rounds use noticeably more yarn than plain rounds, so don’t cut the margin.
Tools:
- US H-8 (5.0 mm) crochet hook
- 2 wooden toggle buttons, 1.25 in (3.2 cm) long
- Locking stitch markers (at least 4)
- Yarn needle
- Matching sewing thread and a sharp needle (optional, for extra-secure toggles)
- Measuring tape
- Scissors
Abbreviations (US Terms)
- ch – chain
- sc – single crochet
- sc2tog – single crochet 2 together
- sc3tog – single crochet 3 together
- sl st – slip stitch
- BLO – back loop only
- rev sc – reverse single crochet (crab stitch): sc worked from left to right
- st(s) – stitch(es)
- sp – space
- RS / WS – right side / wrong side
Bobble: (Yarn over, insert hook in st, yarn over and pull up a loop, yarn over and draw through 2 loops) 5 times in the same st. Then yarn over and draw through all 6 loops on the hook. You work the bobble with the WS facing you, so it pops out toward the RS (the outside of the basket).
Gauge and Checkpoints
Gauge: 14 sc × 16 rounds = 4 in (10.2 cm) in sc.
That works out to 3.5 sts and 4 rounds per inch. Keep the gauge firm so the basket stands up on its own.
Use the base as your test piece. It is the best gauge swatch, because every later count depends on it.
- After Round 1: about 5.25 in (13.3 cm) long.
- After Round 5: about 7.6 × 2.7 in (19.3 × 6.9 cm).
- After Round 9: about 9.75 × 5 in (24.8 × 12.7 cm). The edge should measure about 25.1 in (63.8 cm) around.
If the base is too big: go down to a 4.5 mm hook and start again.
If it is too small: go up to a 5.5 mm hook.
Don’t add or skip increase rounds to fix the size. The wall count of 88 depends on the base ending at exactly 88 sts.

Basket Base
Use Color A. Join every round with a sl st to the first sc, then ch 1. The ch 1 does not count as a stitch. Every round starts at the first st of End A.
Foundation: Ch 20.
Round 1: 3 sc in 2nd ch from hook (End A), sc in next 17 ch, 3 sc in last ch (End B). Rotate and work along the other side of the chain: sc in next 17 ch. Join. (40 sts)
Place one marker in the first st of End A and one in the first st of End B. Move them up each round.
Round 2: [2 sc in each of next 3 sts, sc in next 17] twice. Join. (46 sts: ends 6 each, straights 17 each)
Round 3: [(sc in next st, 2 sc in next st) 3 times, sc in next 17] twice. Join. (52 sts)
Round 4: [(sc in next 2 sts, 2 sc in next st) 3 times, sc in next 17] twice. Join. (58 sts)
Round 5: [(sc in next 3 sts, 2 sc in next st) 3 times, sc in next 17] twice. Join. (64 sts)
Round 6: [(sc in next 4 sts, 2 sc in next st) 3 times, sc in next 17] twice. Join. (70 sts)
Round 7: [(sc in next 5 sts, 2 sc in next st) 3 times, sc in next 17] twice. Join. (76 sts)
Round 8: [(sc in next 6 sts, 2 sc in next st) 3 times, sc in next 17] twice. Join. (82 sts)
Round 9: [(sc in next 7 sts, 2 sc in next st) 3 times, sc in next 17] twice. Join. (88 sts: End A 27, straight 17, End B 27, straight 17)
Each end grows by exactly 3 sts per round, and the straight sides stay at 17. Check: 27 + 17 + 27 + 17 = 88. Fasten off Color A.
Pick one straight side as the back. Mark its 1st and 17th sts with locking markers. These markers show where the toggles go later.
Basket Wall
Round 10 (turning round): Join Color B in the first st of End A. Ch 1, sc in BLO of each st around. Join. (88 sts)
The unworked front loops make a crisp ridge, and the fabric now turns upward.
Round 11: With Color B, sc in each st around. Join. (88 sts) Fasten off Color B.
Rounds 12–14: Join Color A. Sc in each st around. Join. (88 sts each round)
Checkpoint: The wall should be about 1.25 in (3.2 cm) tall from the base ridge.
Round 15 (first bobble round, WS): Ch 1, turn so the WS faces you. [Sc in next 3 sts, bobble in next st] 22 times. Join. (66 sc + 22 bobbles = 88 sts)
Round 16: Ch 1, turn so the RS faces you. Sc in each st around, including the top of each bobble. Join. (88 sts)
Round 17: Ch 1, do not turn. Sc in each st around. Join. (88 sts)
Round 18 (second bobble round): Repeat Round 15. (88 sts)
Rounds 19–20: Repeat Rounds 16–17. (88 sts each round)
Round 21 (third bobble round): Repeat Round 15. (88 sts)
Checkpoint: The wall should be about 3 in (7.6 cm) tall, with 22 bobbles in each of the three bands.
Round 22: Repeat Round 16. (88 sts)
Rounds 23–24: Ch 1, do not turn. Sc in each st around. Join. (88 sts each round) Fasten off Color A.
Checkpoint: The wall should be about 4 in (10.2 cm) tall before the rim. It should keep the same 25.1 in (63.8 cm) circumference as the base edge.
Make All Pieces
You need 1 basket and 2 straps.
- Color A: basket base, Rounds 12–24 of the wall, and both straps
- Color B: Rounds 10–11 of the wall and the 2 rim rounds
Strap (make 2)
Use Color A and work in rows. The ch 1 at the start of each row does not count as a stitch.
Foundation: Ch 6.
Row 1: Sc in 2nd ch from hook and in each ch across, turn. (5 sts)
Row 2: Ch 1, sc in each st across, turn. (5 sts)
Row 3 (buttonhole): Ch 1, sc in first st, ch 3, skip next 3 sts, sc in last st, turn. (2 sc + ch-3 sp)
Row 4: Ch 1, sc in first st, 3 sc in ch-3 sp, sc in last st, turn. (5 sts)
Rows 5–36: Ch 1, sc in each st across, turn. (5 sts each row)
Row 37 (keyhole): Repeat Row 3.
Row 38: Repeat Row 4. (5 sts)
Row 39: Ch 1, sc2tog, sc in next st, sc2tog, turn. (3 sts)
Row 40: Ch 1, sc3tog. (1 st) Do not fasten off.
Edging: Ch 1. Work down the side with 1 sc in the end of each row (40 sc). Along the foundation, work 3 sc in the first ch, sc in the next 3 ch, and 3 sc in the last ch (9 sc). Work up the other side with 1 sc in the end of each row (40 sc). Finish with 3 sc in the top st from Row 40. Join. (40 + 9 + 40 + 3 = 92 sts)
Fasten off and weave in the ends. The tapered top rows and the 3-sc point round off into a teardrop tip above the keyhole.
Strap checkpoint: about 1.75 × 10.5 in (4.4 × 26.7 cm).
Text layout (back wall, seen from inside the basket):
[strap] [strap]
| |
(toggle)----- 16 sts apart -----(toggle)
st 1 of back straight st 17 of back straight
===================== rim ===================
Assembly: Toggles and Straps
Method: Sew each toggle to the inside of the back wall, centered over Round 23. Line each one up with a marked stitch: the 1st and the 17th sts of the back straight side, carried straight up from Round 9. The toggle centers sit 16 sts apart, about 4.6 in (11.7 cm).
Stitch logic: Each toggle sits in the same stitch column as its marker, so the two straps hang plumb and the basket hangs level. Run the yarn through the toggle holes and down through the posts of 2 stitches in Rounds 22–23. Sew through the posts, not just the top loops, because the posts carry the weight much better.
Tension: Pull the sewing yarn snug but not tight. If you pull too hard, the wall dimples inward. Wrap the yarn 3 times around the stitches under the toggle to make a short shank. The shank gives the strap’s buttonhole room to sit.
Fitting: Hang each strap over the back rim from the inside. Push the Row 3 buttonhole over the toggle so the short tail below the buttonhole hangs inside the basket. The keyhole at the top goes over the wall peg.
Size checkpoint: With the strap buttoned, the distance from the peg to the rim should be about 7.75 in (19.7 cm). Both straps must match within one row.
Rim Trim
Rim gauge: The rim uses the same gauge as the body, 3.5 sts per inch. It has no increases, because the wall is a straight 88-st tube.
Round 25: Join Color B in the first st of End A. Ch 1, sc in each st around. Join. (88 sts: End A 27, straight 17, End B 27, straight 17)
Round 26: Ch 1, do not turn. Rev sc in each st around. Join. (88 sts) Fasten off and weave in the ends.
Why the math works: The base ends at 88 sts, and the wall and rim never change that count. Working one stitch into each stitch keeps the rim at exactly 25.1 in (63.8 cm) around, the same as the base edge, so it won’t flare or pucker. The reverse sc goes into the same 88 sts and just twists them into a cord.
You can work the rim before or after you attach the toggles. The order doesn’t change any counts.
Final Blocking
- Weave in every remaining tail, following the stitch columns.
- Lightly mist the basket and both straps with water.
- Pack the basket firmly with a small towel or two toilet rolls so the walls stand straight.
- Push each bobble outward gently with a fingertip.
- Pin the straps flat to 1.75 × 10.5 in (4.4 × 26.7 cm).
- Let everything dry completely, for at least 12 hours.
- Attach the straps and hang the basket.
Final Quality-Control Checklist
- The base measures 9.75 × 5 in (24.8 × 12.7 cm) and lies flat.
- Every wall round counts 88 sts.
- Each bobble band has 22 bobbles, and every bobble pops outward.
- The burgundy bands sit level at the bottom and the rim.
- The rim cord twists evenly, with no gaps.
- Both straps match in length, and their keyholes line up.
- The toggles sit 16 sts apart and level with each other.
- The basket hangs level when it’s loaded.
Troubleshooting
Base curls up like a bowl: Your increases are too tight. Go up half a hook size.
Base ruffles: Your tension is too loose, or a round got extra increases. Count each end: it should have 3 times the round number in sts.
Bobbles pop inward: You worked the bobble round with the RS facing you. Rip it out, turn, and work it again.
Holes beside bobbles: Pull the next sc snug right after each bobble.
Wall leans outward: Your wall tension is looser than your base tension. Use a hook half a size smaller for the wall.
Rim flares: Your reverse sc is too loose. Work it with a smaller hook.
Basket tilts: One toggle is out of line. Re-sew it in the marked column.
Care
Hand wash in cool water and lay flat to dry, reshaping the basket over a rolled towel. Don’t tumble dry, and don’t leave the wooden toggles soaking for long.

Final Notes
Everything follows from your gauge. At 14 sts × 16 rounds per 4 in (10.2 cm), the base comes out at 9.75 × 5 in (24.8 × 12.7 cm) with 88 sts. Those 88 sts carry straight up through the wall, the three bobble bands, and the burgundy rim. Add two 1.75 × 10.5 in (4.4 × 26.7 cm) straps, and the finished basket measures 10 × 5.5 × 4.5 in (25.4 × 14.0 × 11.4 cm).
Check the base, count the 88, and the rest falls into place.
Happy crocheting!