Pink Crown Two-Tier Toilet Paper Basket Crochet Pattern

This hanging holder stores two spare toilet paper rolls in two open baskets. The baskets hang one above the other from a single brass ring, so the holder fits on a towel hook or a small wall hook.

Each basket has a solid purple base and purple openwork sides with a diamond mesh of chain loops. A row of hot-pink pointed shells finishes the rim like a little crown. Teal straps run down both sides of the baskets, and the bright contrast suits a playful, modern bathroom.

The pattern uses US crochet terms. Each basket measures about 5.75 in (14.6 cm) across and 5.75 in (14.6 cm) tall. With the ring included, the assembled holder hangs about 20.5 in (52.1 cm) long.

Each basket is made from a single crochet base worked in rounds and a mesh side panel worked flat in rows. You seam the panel into a tube, join it to the base with single crochet, and then work the pink crown edging in rounds. Two teal strips connect the baskets to the ring.

Finished Size and Construction

  • Basket size: 5.75 in (14.6 cm) diameter × 5.75 in (14.6 cm) tall
  • Hanging length: about 20.5 in (52.1 cm), ring included
  • Skill level: Easy–Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 5 mm (H-8)
  • Number of pieces: 7 (2 bases, 2 side panels, 2 straps, 1 ring)
  • Layout: two baskets stacked vertically, with the straps on opposite sides
  • Side panel (flat): 18.25 in (46.4 cm) wide × 4.5 in (11.4 cm) tall
  • Basket before border: 4.5 in (11.4 cm) tall
  • Border depth: 1.25 in (3.2 cm)

Materials

Use a smooth, firm worsted-weight cotton or cotton blend. Cotton keeps the basket upright and copes well with bathroom humidity. Avoid fuzzy or very stretchy acrylic, because it makes the mesh sag.

  • Purple (main color): 100 g, about 190 m
  • Hot pink (crown edging): 30 g, about 57 m
  • Teal (straps): 35 g, about 67 m

The quantities include a margin of about 15–20% for gauge differences and swatching.

Tools:
– 5 mm (H-8) crochet hook
– One 2 in (5.1 cm) metal ring
– Tapestry needle
– Stitch markers
– Measuring tape
– Blocking pins and a towel

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • tr – treble crochet
  • sk – skip
  • sp – space
  • MR – magic ring
  • st(s) – stitch(es)
  • RS – right side

Special stitch – Pointed Shell: In the same st, work (2 dc, tr, ch 2, tr, 2 dc). Each shell contains 6 sts plus a ch-2 tip, and the ch-2 creates the sharp point.

Gauge and Checkpoints

Gauge: 16 sc and 17 rows = 4 in (10.2 cm).

Make one complete basket before making the second one. The size checkpoints below matter more than the gauge swatch:

  • Base, after Round 6: 3 in (7.6 cm) across
  • Base, after Round 12: 5.75 in (14.6 cm) across
  • Side panel, after Row 2: 18.25 in (46.4 cm) wide × 0.75 in (1.9 cm) tall
  • Side panel, after Row 9: 4.5 in (11.4 cm) tall
  • Strap, after 17 rows: 4 in (10.2 cm) long

If a piece measures too big, go down half a hook size. If it measures too small, go up half a size. The panel width and the base circumference have to match: 18 in (45.7 cm) around after seaming. Check this before seaming.

Close-up of vibrant purple crocheted mesh with magenta trim against a warm tan background.

Base (Make 2, Purple)

Join each round with a sl st to the first sc and ch 1. The ch 1 does not count as a stitch. Stagger the increases from round to round if you want a rounder circle.

Round 1: In MR, work 6 sc. (6 sts)
Round 2: 2 sc in each st. (12 sts)
Round 3: Sc in next st, 2 sc in next st 6 times. (18 sts)
Round 4: Sc in next 2 sts, 2 sc in next st 6 times. (24 sts)
Round 5: Sc in next 3 sts, 2 sc in next st 6 times. (30 sts)
Round 6: Sc in next 4 sts, 2 sc in next st 6 times. (36 sts)

Checkpoint: 3 in (7.6 cm) across.

Round 7: Sc in next 5 sts, 2 sc in next st 6 times. (42 sts)
Round 8: Sc in next 6 sts, 2 sc in next st 6 times. (48 sts)
Round 9: Sc in next 7 sts, 2 sc in next st 6 times. (54 sts)
Round 10: Sc in next 8 sts, 2 sc in next st 6 times. (60 sts)
Round 11: Sc in next 9 sts, 2 sc in next st 6 times. (66 sts)
Round 12: Sc in next 10 sts, 2 sc in next st 6 times. (72 sts)

Checkpoint: 5.75 in (14.6 cm) across. The base should lie flat. Fasten off and weave in the ends.

Side Panel (Make 2, Purple)

The panel is worked flat. Its width is a multiple of 4 sts plus 1, which is what the mesh repeat needs.

Row 1 (RS): Ch 74, sc in 2nd ch from hook and in each ch across. (73 sc)
Row 2: Ch 3 (counts as dc), turn, dc in each st across. (73 dc)

Checkpoint: 18.25 in (46.4 cm) wide × 0.75 in (1.9 cm) tall.

Row 3: Ch 1, turn, sc in first dc, ch 5, sk 3 dc, sc in next dc 18 times. (18 ch-5 loops, 19 sc)

Check the stitch math: 1 + (18 × 4) = 73, so every dc is used.

Row 4: Ch 5 (counts as dc + ch 2), turn, sc in first ch-5 loop, ch 5, sc in next ch-5 loop 17 times, ch 2, dc in last sc. (17 ch-5 loops + 2 half-loops at the edges)

Row 5: Ch 1, turn, sc in first dc, ch 5, sc in next ch-5 loop 17 times, ch 5, sc in 3rd ch of the turning ch. (18 ch-5 loops, 19 sc)

Rows 6–9: Repeat Rows 4–5 twice. Row 9 ends with 18 ch-5 loops and 19 sc.

Checkpoint after Row 6: about 3 in (7.6 cm) tall. After Row 9: 4.5 in (11.4 cm) tall.

Fasten off and leave a 12 in (30.5 cm) tail for seaming.

The loops in alternate rows sit centered over the loops below, which creates the diamond lattice. The solid Rows 1–2 give the basket a firm lower band.

Straps (Make 2, Teal)

Row 1: Ch 5, sc in 2nd ch from hook and in each ch across. (4 sc)
Row 2 (eyelet): Ch 1, turn, sc in first st, ch 2, sk 2, sc in last st. (2 sc + ch-2 sp)
Row 3: Ch 1, turn, sc in first st, 2 sc in ch-2 sp, sc in last st. (4 sc)
Rows 4–82: Ch 1, turn, sc in each st across. (4 sc)
Row 83 (eyelet): Repeat Row 2.
Row 84: Repeat Row 3. (4 sc)
Row 85: Ch 1, turn, sc in each st across. (4 sc)

Fasten off. Each strap has 85 rows and should measure 20 in (50.8 cm) × 1 in (2.5 cm). If you like rounded ends, sl st around the corners at each end.

Make All Pieces

Before assembly, check that you have all of these:

  • Purple: 2 bases (72 sts each) and 2 side panels (73 sts wide, 9 rows)
  • Teal: 2 straps (85 rows each)
  • Hardware: 1 ring

Layout (front view):

            [ RING ]
           /        \
     Strap A        Strap B
        |   5 in free   |
        | [ BASKET 1 ]  |
        |   2 in gap    |
        | [ BASKET 2 ]  |
     eyelet          eyelet

Joining

Seam the panel. With the RS facing out, bring the two short edges of the panel together. Whipstitch the edges so that the first and last stitch columns lie stacked on top of each other. Because those two columns overlap, the 73-st rows become 72 sts around, and the 18 ch-5 loops now run continuously around Row 9.

Keep the seam loose enough to sit flat. A tight seam puckers the mesh.

Attach the base. Place the base inside the bottom of the tube, wrong sides together. Join purple yarn at the seam. Working through Round 12 of the base and the foundation chain of Row 1 together, sc around, matching the stitches 1 to 1. (72 sc)

Sl st to join and fasten off. No stitches are added or skipped, because the 72 base sts match the 72 panel sts exactly.

Don’t pull the yarn tight on this round. Tight stitches make the bottom curl inward.

Checkpoint: The basket should stand upright, measure 18 in (45.7 cm) around and be 4.5 in (11.4 cm) tall.

Border: Pink Crown Edging

Border gauge: 1 pointed shell = 1 in (2.5 cm) wide, and the edging is 1.25 in (3.2 cm) deep.

Work in rounds on the top edge of Row 9. The edge now has 18 sc tops and 18 ch-5 loops; the two end sc of Row 9 stack into one at the seam.

Round 1: Join pink in the sc at the seam, ch 1, sc in the same st. Work 5 sc in the next ch-5 loop, then sc in the next sc. Repeat 18 times, but omit the final sc on the last repeat. Sl st to the first sc. (108 sc)

The count is 18 sc + (18 × 5) = 108.

Round 2: Ch 1, sc in the first st. Sk 2 sts, work a Pointed Shell in the next st, sk 2 sts, sc in the next st. Repeat 18 times, but omit the final sc on the last repeat. Sl st to the first sc. (18 shells, 18 sc)

Fasten off and weave in the ends.

Why the math works: The basket has 72 sts around, which is 18 mesh repeats of 4 sts. Round 1 turns each repeat into exactly 6 sc. Each shell repeat in Round 2 uses exactly 6 sts: sk 2, shell, sk 2, sc. Each shell sits over the 3rd sc of its 5-sc group, so it is centered on a mesh loop. The 18 points spread over 18 in (45.7 cm) give 1 in (2.5 cm) per shell.

Final Blocking

  1. Weave in all ends except the strap ends.
  2. Wet the baskets, then roll them in a towel to remove the excess water.
  3. Stuff each basket with a towel rolled to 5.5 in (14.0 cm) across, so the sides dry straight.
  4. Pin each pink shell tip out into a point, and let everything dry fully.
  5. Lay the straps flat and pin them to 20 in (50.8 cm). Let them dry.
  6. Attach the straps.
  7. Pass the top end of each strap through the ring and fold it 1.5 in (3.8 cm) to the back. Sew the edge of the eyelet down onto the strap.
  8. Measure 5 in (12.7 cm) below the ring and place the top edge of Basket 1 there. Basket 1 is the top basket.
  9. Put Strap A over the seam and Strap B 36 sts away, so the straps sit directly opposite each other.
  10. Sew each strap securely to pink Round 1 and to the base joining round.
  11. Leave a 2 in (5.1 cm) gap, then attach Basket 2 the same way. Sew each strap’s lower eyelet edge to the base joining round of Basket 2.

Final Quality-Control Checklist

  • Each base has 72 sts and measures 5.75 in (14.6 cm) across.
  • Each panel has 73 sts and 18 loops, and is 4.5 in (11.4 cm) tall.
  • The seams are flat and the mesh is not puckered.
  • The joining round has 72 sc and the baskets stand upright.
  • Each crown has 18 shells, all with sharp tips.
  • The straps are 20 in (50.8 cm) long, with clean eyelets.
  • The baskets hang level, with the straps exactly opposite each other.
  • The holder hangs about 20.5 in (52.1 cm) from the top of the ring.

Troubleshooting

  • Base cups or ruffles: If it cups, go up a hook size. If it ruffles, go down a size, or stagger the increases.
  • The mesh doesn’t line up: Make sure you skip 3 dc in Row 3 and always end the even rows with ch 2, dc.
  • The panel is wider than the base: Your dc tension is loose. Go down half a size for Rows 1–2 only.
  • Shells look rounded: The ch-2 tip must sit between the two tr; pin the tips firmly while blocking.
  • The basket tilts: Re-sew the straps at exactly opposite points, 36 sts apart.
  • The straps stretch: Use a tighter tension or a smaller hook, and choose a cotton with low stretch.

Care

Hand wash in cool water and lay flat to dry with a rolled towel inside each basket. Remove the ring first if it isn’t rustproof.

Crocheted toilet paper holder with teal handles and pink-and-purple trim hangs from a brass ring on white bathroom subway tile.

Final Notes

The measurements build on each other:

  • A 72-st base that measures 5.75 in (14.6 cm) across matches a 73-st panel that becomes 72 sts around once seamed.
  • That gives a tube 18 in (45.7 cm) around.
  • Eighteen 1 in (2.5 cm) pointed shells complete the crown, bringing each basket to 5.75 in (14.6 cm) tall.
  • Two 20 in (50.8 cm) straps hang both baskets from the ring.

If every checkpoint matches, the holder will hang straight and hold two rolls.

Happy crocheting!

Leave a Comment