Bunny Vine Ladder Toilet Paper Holder Crochet Pattern

This hanging toilet paper holder turns a plain bathroom wall into a small spring garden. Four sitting bunnies, alternating lilac and peach, each hug a spare roll on their own green shelf. Two leafy vines climb the sides, dotted with dusty pink and cream flowers.

The colors are soft and cottage-style. Sage green is used for the frame and leaves, and lilac and peach for the bunnies. Cream covers muzzles, bellies, inner ears and paws, and dusty pink is for flowers and noses. All instructions use US crochet terms.

The finished holder is about 9 in (22.9 cm) wide including the leaf trim and hangs 36 in (91.4 cm) below the dowel. With the hanging cord, the total height is about 40 in (101.6 cm). Each shelf holds a standard roll up to about 4.3 in (10.9 cm) across.

You crochet two flat rails, four shelves, eight shelf straps and a hanging cord in green, then four amigurumi bunnies. Next, sew the shelves between the rails and the bunnies onto the shelves. The leaf-and-flower vine trim goes on last as the border.

Finished Size and Construction

  • Finished size: 9 in x 36 in (22.9 cm x 91.4 cm) below the dowel
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4)
  • Hooks: 5 mm (H-8) for the frame, 3.75 mm (F-5) for bunnies, leaves and flowers
  • Number of pieces: 2 rails, 4 shelves, 8 straps, 1 hanging cord, 4 bunnies, 32 leaves, 8 flowers
  • Layout: 1 column of 4 tiers, spaced 7.5 in (19.1 cm) apart
  • Shelf size: 6 in x 4.9 in (15.2 cm x 12.4 cm) including its rim
  • Size before border: 7 in x 36 in (17.8 cm x 91.4 cm)
  • Border depth: about 1 in (2.5 cm) of leaf trim on each side

Materials

Use a smooth worsted cotton or acrylic of about 180 m per 100 g. Cotton gives firmer shelves; acrylic gives softer bunnies.

  • Sage green: 160 g (288 m)
  • Lilac: 80 g (144 m)
  • Peach: 80 g (144 m)
  • Cream: 50 g (90 m)
  • Dusty pink: 10 g (18 m)

These amounts include about 15% extra.

Tools: 5 mm and 3.75 mm hooks, 8 black safety eyes (10 mm), about 150 g polyester fiberfill, a 10 in (25.4 cm) wooden dowel 0.5 in (1.3 cm) thick, stitch markers, tapestry needle, scissors, pins.

Abbreviations (US Terms)

  • ch chain
  • sl st slip stitch
  • sc single crochet
  • hdc half double crochet
  • dc double crochet
  • inc 2 sc in the same stitch
  • dec single crochet two together (invisible decrease recommended)
  • MR magic ring
  • BLO back loop only
  • st(s) stitch(es)

Special stitch, rope rim: sl st in the BLO of each stitch. Keep the hook loose so the slip stitches form a raised, twisted ridge.

Gauge and Checkpoints

  • Frame gauge (5 mm): 16 sc and 18 rows = 4 in (10.2 cm).
  • Bunny gauge (3.75 mm): 5 sc and 5.5 rounds = 1 in (2.5 cm).

Make one shelf first. Before the rim it should measure 5.5 in x 4.4 in (14.0 cm x 11.2 cm). Then make one bunny head: after Round 6, the flat circle should measure 2.25 in (5.7 cm) across.

If your pieces are too big, go down half a hook size. If they are too small, go up half a size. Frame gauge matters most, because each shelf must fit exactly between the rails.

Close-up of a crocheted amigurumi's cream face, black bead eye, and pink embroidered smile surrounded by lavender textured yarn.

Rails (make 2, green, 5 mm hook)

Row 1: Ch 153, sc in 2nd ch from hook and in each ch across. Turn. (152 sc)

Row 2: Ch 1, rope rim across. Fasten off. (152 sl st)

Checkpoint: each rail is 38 in (96.5 cm) long and about 0.5 in (1.3 cm) wide. The top 8 sts (2 in, 5.1 cm) fold over the dowel, leaving 144 sts (36 in, 91.4 cm) hanging.

Place markers on the inner edge, counting down from the fold line. Straps go at sts 20, 50, 80 and 110. Shelves go at sts 36, 66, 96 and 126. The shelves are 30 sts (7.5 in, 19.1 cm) apart, and each strap point is 16 sts (4 in, 10.2 cm) above its shelf.

Shelves (make 4, green, 5 mm hook)

Row 1: Ch 23, sc in 2nd ch from hook and in each ch across. Turn. (22 sc)

Rows 2–20: Ch 1, sc in each st across. Turn. (22 sc)

Checkpoint: 5.5 in x 4.4 in (14.0 cm x 11.2 cm).

Rim Round 1: Ch 1, 22 sc across Row 20, ch 1 (corner), 20 sc down the row ends, ch 1, 22 sc across the foundation loops, ch 1, 20 sc up the row ends, ch 1, sl st to first sc. (84 sc + 4 corner ch-1 spaces)

Rim Round 2: Rope rim in each sc, working 1 sl st in each corner ch-1 space. Fasten off. (84 + 4 = 88 sl st)

Checkpoint: 6 in x 4.9 in (15.2 cm x 12.4 cm). One 22-st edge is the back edge, against the wall; the opposite edge is the front.

Straps and Hanging Cord (green, 5 mm hook)

Straps (make 8): Ch 25, sc in 2nd ch from hook and each ch across. Fasten off, leaving a long tail. (24 sc, 6 in, 15.2 cm)

Hanging cord (make 1): Ch 61, sc in 2nd ch from hook and each ch across, then work rope rim back along the other side. Fasten off. (60 sc, 15 in, 38.1 cm)

Bunnies (make 2 lilac, 2 peach, 3.75 mm hook)

Work in continuous rounds. “Main” means lilac or peach.

Head (main)

Rnd 1: 6 sc in MR. (6)
Rnd 2: Inc in each st. (12)
Rnd 3: (Sc, inc) x 6. (18)
Rnd 4: (2 sc, inc) x 6. (24)
Rnd 5: (3 sc, inc) x 6. (30)
Rnd 6: (4 sc, inc) x 6. (36)
Rnds 7–14: Sc in each st. (36)
Rnd 15: (4 sc, dec) x 6. (30)
Rnd 16: (3 sc, dec) x 6. (24)

Insert the eyes between Rnds 10 and 11, 6 sts apart. Stuff firmly.

Rnd 17: (2 sc, dec) x 6. (18)
Rnd 18: (Sc, dec) x 6. (12)
Rnd 19: Dec x 6. Fasten off and close. (6)

Muzzle (cream)

Rnd 1: 6 sc in MR. (6)
Rnd 2: Inc in each st. (12)
Rnd 3: (Sc, inc) x 6. Fasten off, leaving a long tail. (18)

Embroider a pink triangle nose on Rnd 1 with a short line below it. Sew the muzzle below the eyes over Rnds 11–15, stuffing it lightly.

Ears (make 2 outer in main, 2 inner in cream)

Outer ear, Rnd 1: 6 sc in MR. (6)
Rnd 2: (Sc, inc) x 3. (9)
Rnd 3: (2 sc, inc) x 3. (12)
Rnd 4: (3 sc, inc) x 3. (15)
Rnds 5–14: Sc in each st. (15)
Rnd 15: (3 sc, dec) x 3. (12)
Rnds 16–18: Sc in each st. (12)

Do not stuff. Flatten and work 6 sc through both layers to close. Checkpoint: 3.3 in (8.4 cm) long.

Inner ear: Ch 12, sc in 2nd ch from hook, 9 sc, 3 sc in last ch. Working along the other side, 9 sc, 2 sc in last ch, sl st to first sc. (1 + 9 + 3 + 9 + 2 = 24 sc)

Sew each inner ear to the front of an outer ear. Sew the ears to the head over Rnds 3–5 so they flop down beside the face.

Body (main)

Rnds 1–6: Work as Head Rnds 1–6. (36)
Rnds 7–16: Sc in each st. (36)
Rnd 17: (4 sc, dec) x 6. (30)
Rnds 18–20: Sc in each st. (30)
Rnd 21: (3 sc, dec) x 6. (24)
Rnd 22: Sc in each st. (24)
Rnd 23: (2 sc, dec) x 6. Fasten off, leaving a long tail. (18)

Stuff firmly, keeping the base flat so the bunny sits upright.

Belly Patch (cream)

Rnd 1: Ch 6, sc in 2nd ch from hook, 3 sc, 3 sc in last ch. Working along the other side, 3 sc, 2 sc in last ch. (12)
Rnd 2: Inc, 3 sc, inc x 3, 3 sc, inc x 2. (18)
Rnd 3: (Sc, inc), 3 sc, (sc, inc) x 3, 3 sc, (sc, inc) x 2. Fasten off. (24)

Sew to the body front over Rnds 8–18.

Arms (make 2)

Rnd 1 (cream): 6 sc in MR. (6)
Rnd 2: (Sc, inc) x 3. (9)
Rnds 3–4: Sc in each st. (9)
Rnds 5–22 (main): Sc in each st. (9)

Stuff only the paw. Flatten and work 4 sc through both layers to close. Checkpoint: 4 in (10.2 cm) long.

Legs (make 2)

Rnd 1 (cream): 6 sc in MR. (6)
Rnd 2: Inc in each st. (12)
Rnds 3–4: Sc in each st. (12)
Rnds 5–8 (main): Sc in each st. (12)

Stuff lightly, flatten and work 6 sc through both layers to close.

Tail (cream)

Rnd 1: 6 sc in MR. (6)
Rnd 2: Inc in each st. (12)
Rnd 3: Sc in each st. (12)
Rnd 4: Dec x 6. Stuff and close. (6)

Bunny Assembly

Sew the head to the open edge of the body. Sew an arm on each side at Rnd 21. Sew the legs at Rnd 6, facing forward so the cream soles show, and the tail at the lower back. Checkpoint: the seated bunny is about 6 in (15.2 cm) tall.

Make All Pieces

  • Green: 2 rails, 4 shelves, 8 straps, 1 hanging cord, 32 leaves
  • Lilac: 2 bunnies (tiers 1 and 3)
  • Peach: 2 bunnies (tiers 2 and 4)
  • Cream: 4 muzzles, 4 inner-ear pairs, 4 belly patches, 4 tails, 4 flowers
  • Dusty pink: 4 flowers, nose embroidery

Layout, top to bottom:

 [ dowel + hanging cord ]
 | rail |  Tier 1: lilac  | rail |
 | rail |  Tier 2: peach  | rail |
 | rail |  Tier 3: lilac  | rail |
 | rail |  Tier 4: peach  | rail |

Joining

Lay both rails flat, 6 in (15.2 cm) apart from inner edge to inner edge, with the markers lined up.

Shelves: Hold each shelf level at its shelf markers, back edge toward the wall. Whipstitch the first 2 back-edge sts to the left rail over the marked st and the st above it. Sew the last 2 sts to the right rail the same way. The shelf is 6 in (15.2 cm) wide including its rim, the same as the gap between the rails, so it fits without stretching or gathering.

Straps: Sew one strap end to each front corner of the shelf. Sew the other end to the rail at the strap marker 16 sts above. The shelf is 4.4 in (11.2 cm) deep and the strap point is 4 in (10.2 cm) higher, so a 6 in (15.2 cm) strap holds the shelf level.

Bunnies: Sit each bunny on the right end of its shelf with its back against the right rail. Sew the base to the shelf and the back to the rail. Leave the arms free so you can lift one to slide a roll in.

Dowel: Fold the top 8 sts of each rail over the dowel and sew in place. Tie the hanging cord ends around the ends of the dowel.

Keep your sewing firm but not tight; the rails should lie flat without puckering. Checkpoint: 7 in x 36 in (17.8 cm x 91.4 cm) before the trim.

Border: Vine Trim

The border is a line of leaves and flowers sewn along the outer edge of each rail.

Leaf (make 32, green, 3.75 mm): Ch 8. Starting in 2nd ch from hook: sc, hdc, dc, dc, hdc, sc, 3 sc in last ch. Working along the other side: sc, hdc, dc, dc, hdc, sc. Sl st to first sc. Fasten off. (15 sts, 1.75 in, 4.4 cm)

Flower (make 4 pink, 4 cream, 3.75 mm):
Rnd 1: 10 sc in MR, sl st to first sc. (10)
Rnd 2: (Ch 2, 2 dc in next st, ch 2, sl st in next st) x 5. Fasten off. (5 petals, 1.25 in, 3.2 cm)

Add a French knot center in the other flower color.

Border gauge: one trim point every 12 rail sts (3 in, 7.6 cm).

Placement, per rail (side): 144 hanging sts ÷ 12 = 12 trim points, at sts 6, 18, 30, 42, 54, 66, 78, 90, 102, 114, 126 and 138.

  • Flowers go at sts 30, 66, 102 and 138 (4 per side). Start the left rail with pink and the right rail with cream, then alternate colors.
  • Leaf pairs go at the other 8 points (16 leaves per side), angled up the vine.

Why the math works: 12 points x 12 sts = 144 sts, exactly the hanging length. That leaves 6 sts (1.5 in, 3.8 cm) of clear rail at the top and bottom, so the spacing stays even. Two sides x 16 leaves = 32 leaves, and two sides x 4 flowers = 8 flowers. The leaves stick out about 1 in (2.5 cm) on each side, so the total width is 7 in + 2 in = 9 in (22.9 cm).

Final Blocking

  1. Lightly mist the frame (rails, shelves and trim) with water.
  2. Pin it flat on a blocking mat to 9 in x 36 in (22.9 cm x 91.4 cm).
  3. Pin each leaf open at its tip and each flower’s petals flat.
  4. Let it dry completely, about 12 hours.
  5. Unpin and hang. Do not block the bunnies; just fluff their ears with your fingers.

Final Quality-Control Checklist

  • Both rails hang straight and equal, each 36 in (91.4 cm) below the dowel.
  • All four shelves sit level, 7.5 in (19.1 cm) apart.
  • Each shelf holds a roll without sagging at the front.
  • The bunnies go lilac, peach, lilac, peach from the top.
  • The eyes are level and the safety backs are fully pressed on.
  • Each rail has 16 leaves and 4 flowers, evenly spaced.
  • All yarn tails are woven in and hidden.

Troubleshooting

  • Shelf too wide for the rails: Your gauge is loose. Remake it with a smaller hook.
  • Shelf tilts forward: Shorten the straps by attaching them 1–2 sts higher on the rail.
  • Rails twist: Steam lightly and pin flat. The rope rim pulls if it’s worked too tightly.
  • Bunny leans over: Add stuffing to the base and flatten it before sewing.
  • Stuffing shows through: Use a smaller hook for the bunnies.
  • Arm won’t stay over the roll: Stuff the paw a little more so its weight holds the arm down.

Care

Spot clean with mild soap and cool water, and dry flat. Take out the dowel before hand washing the whole piece.

Crocheted wall hanging with pastel bunnies in purple and peach holding white planters, surrounded by green vines with tiny flowers.

Final Notes

The measurements build on each other. 16 sc = 4 in (10.2 cm), so a 22-st shelf plus its rim is 6 in (15.2 cm) wide and fits exactly between rails set 6 in (15.2 cm) apart. The 144 hanging rail sts give 36 in (91.4 cm), divided into 30-st, 7.5 in (19.1 cm) tiers and twelve 12-st trim points. Check each stage and the holder will come together straight, level and ready for spring.

Happy crocheting!

Leave a Comment