The Lavender Frost Star is a lacy six-pointed snowflake ornament worked in soft lavender cotton thread. Its center is a solid ring of double crochet around an open hole. Six long chain petals reach into the inner corners of the star, and six short spokes carry treble fans out into the points. A neat single crochet edging traces the star outline, and a tiny three-picot trefoil finishes every tip.
The look is delicate but crisp: open loops inside, firm straight edges outside. It works as a tree ornament, a gift topper, or a window decoration. A soft pastel like lavender gives it a frosty winter feel without the usual white.
This pattern uses US crochet terms. The finished star is 4.5 in (11.4 cm) from tip to opposite tip, and the hanging loop adds about 1.5 in (3.8 cm).
You work the star in the round as one piece: a center ring, then a petal-and-spoke round, then the treble fans, then a chain frame, and finally the edging with trefoil tips. The last step is a chain hanging loop.
Finished Size and Construction
- Finished size: 4.5 in (11.4 cm) from tip to opposite tip
- Skill level: Intermediate (relaxed chain tension, working around chain loops)
- Terminology: US crochet terms
- Yarn weight: Size 3 cotton crochet thread
- Hook: 2.0 mm steel hook
- Number of pieces: 1
- Layout: Single motif, no joining
- Piece size: 4.5 in (11.4 cm) tip to tip
- Size before border: 3.75 in (9.5 cm) tip to tip after Round 4
- Border depth: 0.375 in (1.0 cm) at each tip, including the trefoil
Materials
Yarn: Use a mercerized cotton crochet thread in size 3. Mercerized cotton holds a crisp shape after blocking and shows the stitch detail clearly. Avoid fuzzy or very stretchy fibers, because the open loops will lose their shape.
- Lavender: 6 g / 16 m (about 17.5 yd), enough for one star with its hanging loop
These quantities include a margin for a test swatch and the weaving tails. If you plan several stars, multiply by the number of ornaments.
Tools:
- 2.0 mm steel crochet hook
- Fine tapestry needle
- Small sharp scissors
- Blocking board or foam mat
- Rust-proof pins
- Spray starch or a starch-and-water mix
- Measuring tape or ruler
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- tr – treble crochet (yarn over twice)
- sp – space
- st(s) – stitch(es)
- standing sc – start with a slip knot on the hook, insert the hook, yarn over, pull up a loop, yarn over, pull through both loops
Special stitch – Trefoil: (Ch 4, sl st in the 4th ch from the hook) 3 times, then sl st in the top of the last sc made. This makes three small picots clustered at one point.
Gauge and Checkpoints
Gauge matters less for an ornament than for a garment. Still, it controls whether the chain frames lie flat. Make one test star before starting a batch, and check it at each stage below.
Border gauge: 10 sc = 1 in (2.5 cm) when worked into chain spaces.
Checkpoints (measured flat, not stretched):
- After Round 1: the ring is 0.75 in (1.9 cm) across.
- After Round 2: petal tip to opposite petal tip is 2.5 in (6.4 cm), and spoke tip to opposite spoke tip is 2.25 in (5.7 cm).
- After Round 3: the fan tops measure 3 in (7.6 cm) across from one point to the opposite point.
- After Round 4: the ch-3 tip to the opposite ch-3 tip is 3.75 in (9.5 cm).
- After Round 5: trefoil to opposite trefoil is 4.5 in (11.4 cm).
If the star is too big, or the chain loops flop and ripple, go down to a 1.75 mm hook. If it is too small, or the frame pulls the fans into a cup shape, go up to a 2.25 mm hook. Most frame problems come from chain tension, so keep your chains even and relaxed, about the same width as one sc.

Pattern
Round 1 – Center Ring
Ch 6, sl st in the first ch to form a ring.
Ch 3 (counts as dc), work 17 dc in the ring, then sl st in the top of the beginning ch-3 to join.
Stitch count: 18 dc.
The ch-6 ring leaves the open center hole seen in the finished star. Check that the ring is 0.75 in (1.9 cm) across and lies flat.
Round 2 – Petals and Spokes
This round makes the six petal loops and the six spokes at the same time. Each repeat is worked over 3 dc.
Ch 1. *Sc in the next dc, ch 12, sc in the next dc (one petal loop made), sc in the next dc, ch 7, sc in the 2nd ch from the hook and in the next 5 ch (one spoke made); repeat from * 5 more times, ending with the sixth spoke. The 1st repeat starts in the same st as the join. Sl st in the first sc to join, then fasten off.
Stitch count: 18 sc on the ring, 6 ch-12 petal loops, 6 spokes of 6 sc each (36 sc).
Here is why the spacing works. The ring has 18 dc, so each dc covers 20 degrees. Each petal sits between dc 1 and dc 2 of its repeat, and each spoke rises from dc 3. That puts every spoke exactly 30 degrees from the petals on either side, so the petals point into the star’s inner corners and the spokes point toward the star tips.
The top of each spoke is the skipped ch at its end. That ch is the spoke tip used in Round 3.
Checkpoint: petal tip to opposite petal tip is 2.5 in (6.4 cm). Lay the petals flat as soft ovals, not twisted.
Round 3 – Treble Fans
Join the thread with a standing sc around the tip of any petal loop, working under the 6th and 7th ch of the ch-12 together.
*Ch 5, work 7 tr in the skipped ch at the tip of the next spoke, ch 5, sc around the tip of the next petal loop (under the 6th and 7th ch); repeat from * 5 more times. On the last repeat, replace the final sc with a sl st in the first sc to join.
Stitch count: 6 sc, 42 tr (7 per fan), 12 ch-5 sps.
All 7 tr come from one stitch, so they spread outward into a fan. That gives the fan-shaped fill in each point. The ch-5 arcs link each petal tip to the base of the next fan.
Checkpoint: fan top to opposite fan top is 3 in (7.6 cm).
Round 4 – Star Frame
This round builds the triangle around each fan and sets the sharp tip.
Ch 1, sc in the same sc as the join (this is the first inner-corner sc). *Ch 5, sc in the 2nd tr of the next fan, ch 3, (sc, ch 3, sc) in the 4th (center) tr, ch 3, sc in the 6th tr, ch 5, sc in the next petal-tip sc; repeat from * 5 more times. On the last repeat, replace the final sc with a sl st in the first sc to join.
Stitch count: 30 sc (6 inner-corner sc + 4 sc per point), 12 ch-5 sps, 18 ch-3 sps (including 6 tip ch-3 sps).
Per point: ch-5 sp, sc, ch-3 sp, sc, tip ch-3 sp, sc, ch-3 sp, sc, ch-5 sp. The fan’s 2nd, 4th and 6th tr are anchored to the frame. The 1st, 3rd, 5th and 7th tr stay free inside the triangle, which keeps the lacy look.
Checkpoint: tip ch-3 to opposite tip ch-3 is 3.75 in (9.5 cm). This is the size before the border.
Border
The border is a single sc edging with a trefoil at each tip. It straightens the star sides and sharpens the outline.
Border gauge: 10 sc = 1 in (2.5 cm). Each finished side is 12 sc, so it measures about 1.2 in (3.0 cm) along the edge.
Round 5 – Edging and Trefoil Tips
Sl st into the first ch-5 sp.
Ch 1. *Work 5 sc in the ch-5 sp, sc in the next sc, 3 sc in the next ch-3 sp, sc in the next sc, 2 sc in the tip ch-3 sp, Trefoil, 2 more sc in the same tip ch-3 sp, sc in the next sc, 3 sc in the next ch-3 sp, sc in the next sc, 5 sc in the next ch-5 sp, sl st in the inner-corner sc; repeat from * 5 more times. The last sl st lands in the inner-corner sc where Round 4 joined. Fasten off.
Per side count: 5 + 1 + 3 + 1 + 2 = 12 sc.
Per point count: 12 sc + 12 sc = 24 sc, plus 1 Trefoil at the tip.
Inner corner: 1 sl st (no sc).
Round total: 144 sc, 6 Trefoils, 6 sl sts.
Why the math works: each chain space gets exactly as many sc as it has chains (ch-5 gets 5 sc, ch-3 gets 3 sc), and each Round 4 sc gets 1 sc. That keeps the straight sides flat with no ruffling and no pulling. The tip ch-3 is split 2 + 2 around the Trefoil, so the Trefoil sits exactly at the point. The inner corner gets only a sl st, which keeps the V sharp instead of rounding it off.
Checkpoint: trefoil to opposite trefoil is 4.5 in (11.4 cm). The border adds 0.375 in (1.0 cm) at each tip: 3.75 in + 0.375 in + 0.375 in = 4.5 in (9.5 cm + 1.0 cm + 1.0 cm ≈ 11.4 cm).
Hanging Loop
Choose a tip to be the top. Join the thread with a sl st in the middle picot of that Trefoil. Ch 25, sl st in the same picot. Fasten off, leaving a 6 in (15.2 cm) tail to weave in.
The loop hangs about 1.5 in (3.8 cm) above the star. If you want to block it straight, add a second row of sl sts back along the chain, but that is optional.
Final Blocking
Thread stars need blocking. It turns soft loops into crisp snowflake lines.
- Weave in all ends before blocking. Follow the stitch paths on the back of the spokes or frame, not across open spaces.
- Wet the star in cool water, then press it gently in a towel until it is just damp.
- Pin the center. Put one pin through the center hole to hold it in place.
- Pin the tips. Pin the 6 trefoils evenly on a 4.5 in (11.4 cm) circle, 60 degrees apart. A printed circle or a ruler from the center pin helps.
- Pin the inner corners. Pin each V where the petal tip sits, pulling gently toward the center so the star sides become straight lines.
- Shape the petals. Use a pin tip to open each ch-12 petal into a smooth oval.
- Open the picots. Pin the middle picot of each trefoil outward and spread the two side picots slightly.
- Starch. Spray evenly on both sides, or dab on a starch mix with a brush.
- Dry fully for at least 12 hours before unpinning.
Final Quality-Control Checklist
- Round 1 has 18 dc around an open center hole.
- There are 6 petal loops and 6 spokes, alternating evenly.
- Every fan has 7 tr, with the 2nd, 4th and 6th tr anchored to the frame.
- Each star side has 12 sc, and each point has 24 sc in total.
- All 6 trefoils have 3 distinct picots.
- Every inner corner is a sharp V.
- The star measures 4.5 in (11.4 cm) tip to tip.
- The hanging loop is secure and centered on the top trefoil.
- No tails are visible from the front.
- The star lies completely flat, with no cupping or ruffling.
Troubleshooting
The star cups like a bowl. The Round 4 chains are too tight. Rework them with slightly looser chains, or go up a hook size for Rounds 4–5 only.
The sides ripple. The chains are too loose, or you added extra sc. Recount: each side must have exactly 12 sc.
The petals twist. The ch-12 got twisted while you worked Round 2. Keep the chain’s front facing you as you work. Light twists usually block out.
The fans lean to one side. The 7 tr were worked into the side of the spoke instead of into the skipped tip ch. Check that you go into the topmost ch only.
The tips are blunt. You worked sc instead of the sl st at the inner corners, or the trefoil is not centered. Check the 2 + 2 sc split in the tip ch-3.
The center hole closed up. The beginning ring was pulled too tight. Start with a relaxed ch-6 and don’t tighten it afterward.
The star is lopsided. Count Round 2 again. A missed dc shifts the spokes off their 30-degree spacing.
Care
Hand wash in cool water with mild soap, press dry in a towel, and re-block with starch as needed. Store the star flat between sheets of tissue paper so the points keep their shape.

Final Notes
The Lavender Frost Star builds its size in clear, measurable steps:
- 0.75 in (1.9 cm) center ring
- 2.5 in (6.4 cm) petal span
- 3 in (7.6 cm) fan span
- 3.75 in (9.5 cm) frame before the border
- 4.5 in (11.4 cm) finished after the trefoil edging
If each checkpoint matches, the next round will lie flat. Once your test star works, the rest go quickly, and a handful of lavender stars makes a soft, frosty change from classic white snowflakes.
Happy crocheting!