The Snowy Cottage is a small, lacy house ornament worked in cotton thread. It has a scalloped base, two ladder-style walls, a floating four-pane window and a roof made of spokes that meet at a small peak ring. Stiffened, it hangs flat and keeps its shape on the tree.
The sample is cream and looks like frosted gingerbread trim. The design also works well in soft pastels like blush pink, sage green and powder blue. If you make a set, use one solid color per ornament so the openwork reads clearly.
This pattern uses US crochet terms. The finished ornament measures 3 7/8 in (9.8 cm) wide by 3 3/4 in (9.5 cm) tall. With the hanging loop it is 5 1/4 in (13.3 cm) tall.
You work the ornament in this order: the base strip first, then the two walls into the free loops of its foundation chain, then the eave bar across the wall tops, then the roof spokes from one continuous strand. The window is a tiny filet square. Its frame round joins it to the base, and the hanging loop finishes the piece.
Finished Size and Construction
- Finished size: 3 7/8 in (9.8 cm) wide × 3 3/4 in (9.5 cm) tall; 5 1/4 in (13.3 cm) tall including the loop
- Skill level: Intermediate (thread work, working into chains)
- Terminology: US
- Yarn weight: Size 3 cotton crochet thread
- Hook: 2.0 mm
- Number of pieces: 1 ornament (the window is joined as you go during its frame round)
- Layout: Single standalone ornament
- Piece size: Base strip 3 1/8 in (7.9 cm) wide; walls 1 1/2 in (3.8 cm) tall; eave 3 7/8 in (9.8 cm) wide
- Size before border: Window body 5/8 in (1.6 cm) wide × 1/2 in (1.3 cm) tall
- Border depth: 1/8 in (0.3 cm) frame on the window, which blocks to a 7/8 in (2.2 cm) square
Materials
Use a mercerized cotton thread in size 3. Mercerized cotton gives crisp stitch definition and takes stiffener well. Avoid fuzzy or acrylic threads, because the spokes will blur and won’t hold a sharp line.
- Cream (main color): 8 g, about 25 m
- Optional alternate colors (pink, sage, blue): 8 g, about 25 m each, per ornament
One ornament uses about 16 m. The quantities above include a margin for a gauge swatch and weaving in ends.
Tools:
– 2.0 mm crochet hook (and a 2.25 mm hook in case your gauge is tight)
– Fine tapestry needle
– Small scissors
– Stitch markers (2–3)
– Fabric stiffener or heavy spray starch
– Foam blocking board and rustproof pins
– Ruler marked in inches and cm
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sp – space
- st(s) – stitch(es)
- RS – right side
Special stitch – Shell: (dc, ch 1) 4 times, then dc, all in the same stitch. Each shell has 5 dc and 4 ch-1 spaces.
Covered spoke: Chain the stated number, sl st into the target stitch, then work 1 sc in each chain back to where you started. The result is a firm, beaded line.
Gauge and Checkpoints
Gauge: 8 sc = 1 in (2.5 cm), and 4 rows of dc = 1 in (2.5 cm).
Don’t make a separate swatch. Work Rows 1–3 of the base strip first and use them as your test.
Checkpoints:
1. Base Row 1 (25 sc) measures 3 1/8 in (7.9 cm).
2. Each wall (6 dc rows) measures 1 1/2 in (3.8 cm) tall.
3. Eave Row 2 (31 sc) measures 3 7/8 in (9.8 cm).
4. The window body measures 5/8 in (1.6 cm) wide × 1/2 in (1.3 cm) tall before its frame.
5. The framed window measures 7/8 in (2.2 cm) wide × 3/4 in (1.9 cm) tall, and blocks square.
If your base is too big (over 3 1/4 in / 8.3 cm), switch to a smaller hook or tighten your chains. If it is too small (under 3 in / 7.6 cm), go up to the 2.25 mm hook. Check gauge before you start the walls, because every later part depends on these 25 stitches.

Part 1: Scalloped Base Strip
Foundation: Ch 26.
Row 1 (RS): Sc in 2nd ch from hook and in each ch across. Turn. (25 sc)
Number the foundation chain’s free loops 1–25 from right to left as the RS faces you. You will work the walls and window into these loops later.
Row 2 (Shells): Ch 1, sc in first sc, skip 3 sc, Shell in next sc, skip 3 sc, sc in next sc; repeat from * 2 more times. Turn.
(4 sc + 3 shells = 4 sc, 15 dc, 12 ch-1 sps)*
Check: the first sc uses 1 st, and each repeat uses 8 sts, so 1 + 24 = 25 sts. That uses all of Row 1.
Row 3 (Trim): Sl st in first sc, sc in next dc, (2 sc in next ch-1 sp, sc in next dc) 4 times, sl st in next sc; repeat from * 2 more times. Fasten off.
(4 sl st + 15 sc in dc + 24 sc in ch-1 sps = 43 sts)*
This is a trim row. Working 1 stitch into each existing stitch and space gives 31 (4 + 15 + 12). The 2nd sc in each of the 12 ch-1 spaces adds 12 more, for 43. Each scallop has 13 sc around its edge.
Checkpoint: The strip measures 3 1/8 in (7.9 cm) across the straight top edge and 1/2 in (1.3 cm) tall.
Part 2: Walls (Make 2)
Hold the strip with the scallops pointing down, so the free foundation loops run along the top.
Left wall: Join thread with a sl st in free loop 25 (the far left end).
Row 1: Ch 3 (counts as dc), dc in free loop 24. Turn. (2 dc)
Rows 2–6: Ch 3 (counts as dc), dc in the top of the next st (the turning ch of the row below). Turn. (2 dc each row)
Fasten off. The wall looks like a narrow ladder: two vertical posts with a short bar at the top of each row.
Right wall: Join in free loop 2, and work Row 1 into loops 2 and 1. Then work Rows 2–6 the same as the left wall. Fasten off.
Checkpoint: Both walls measure 1 1/2 in (3.8 cm) tall, and the gap between them spans loops 3–23 (21 loops).
Part 3: Eave Bar
Row 1: Make a slip knot and ch 3. With the RS facing, sc in each of the 2 sts at the top of the left wall. Ch 21, then sc in each of the 2 sts at the top of the right wall. Ch 4.
(3 ch + 2 sc + 21 ch + 2 sc + 4 ch)
The 21 chains match the 21 free loops between the walls, so the walls stay parallel instead of leaning in or flaring out.
Row 2: Turn, sc in 2nd ch from hook and next 2 ch (3 sc of right overhang), sc in next 2 sc, sc in each of next 21 ch, sc in next 2 sc, sc in each of the 3 beginning ch (left overhang). Do not fasten off.
(3 + 2 + 21 + 2 + 3 = 31 sc)
Number the eave sc 1–31 from left to right. Your hook is now at sc 1, the left tip.
Checkpoint: The eave measures 3 7/8 in (9.8 cm) and overhangs each wall by 3/8 in (1.0 cm).
Part 4: Spoked Roof
The roof is worked from one continuous strand, starting from the left eave tip. It has 7 lines (2 slopes and 5 spokes) that meet at eave sc 1, 6, 11, 16, 21, 26 and 31.
- Left slope: Ch 18.
- Peak ring: Ch 4, sl st in the 5th ch from hook (the top chain of the slope). From now on, call that chain the peak ch.
- Spoke A: Ch 14, sl st in eave sc 6, sc in each ch back to the peak (14 sc), sl st in the peak ch.
- Spoke B: Ch 11, sl st in eave sc 11, 11 sc back, sl st in the peak ch.
- Center spoke: Ch 10, sl st in eave sc 16, 10 sc back, sl st in the peak ch.
- Spoke C: Ch 11, sl st in eave sc 21, 11 sc back, sl st in the peak ch.
- Spoke D: Ch 14, sl st in eave sc 26, 14 sc back, sl st in the peak ch.
- Right slope: Ch 18, sl st in eave sc 31, 18 sc back, sl st in the peak ch.
- Cover the left slope: Work 18 sc down the left slope chain and sl st in eave sc 1. Fasten off.
Roof totals: Slopes 18 + 18 = 36 sc. Spokes 14 + 11 + 10 + 11 + 14 = 60 sc. That is 96 sc in all.
The chain lengths follow the geometry. The center spoke rises 1 1/4 in (3.2 cm), which is 10 chains. The spokes further out reach farther sideways, so they need more chains. The slopes reach 15 stitches sideways and 1 1/4 in (3.2 cm) up, so they need 18 chains.
Checkpoint: The roof measures 1 1/2 in (3.8 cm) tall including the ring, and all 7 lines lie flat without pulling the eave upward.
Part 5: Window Body
Foundation: Ch 9.
Row 1: Dc in the 7th ch from hook (the skipped chains count as the first dc and a ch-1 space), ch 1, skip next ch, dc in last ch. Turn.
(3 dc, 2 ch-1 sps)
Row 2: Ch 4 (counts as dc + ch 1), dc in center dc, ch 1, dc in the top of the beginning post. Do not turn.
(3 dc, 2 ch-1 sps)
The two rows form a 2 × 2 grid of open squares. The center dc and the horizontal bar between rows make the window cross.
Checkpoint: The window body measures 5/8 in (1.6 cm) wide × 1/2 in (1.3 cm) tall. Continue straight into the border without fastening off.
Border: Window Frame and Hanging Loop
Border gauge: 8 sc = 1 in (2.5 cm), the same as the base gauge.
Frame round: Ch 1, 3 sc in the last dc made (corner). Then:
– Side 1: Work down the row ends: sc around the Row 2 post, sc where the two rows meet, sc around the Row 1 post (3 sc).
– Corner: 3 sc in the first free foundation loop.
– Bottom: Sc in the next free loop. In the center loop, work sc, then ch 2, sl st in free loop 13 of the base strip, ch 2, sl st in the sc just made (this is the post). Sc in the next free loop (3 sc).
– Corner: 3 sc in the last free loop.
– Side 2: 3 sc up the row ends, as on Side 1.
– Corner: 3 sc in the top of the turning post.
– Top: Sc in the ch-1 sp, sc in the center dc, sc in the ch-1 sp (3 sc).
– Join with a sl st to the first sc. Fasten off.
Count: 4 corners × 3 sc + 4 sides × 3 sc = 24 sc. The 4 post chains are not counted.
Per side: Each side has 7 sts, counting both corner center stitches: corner center + 1 + 3 + 1 + corner center. Four sides of 7 sts, minus the 4 corner stitches shared between sides, equals 24, so nothing is counted twice.
Why the math works: At 8 sc per inch, 7 stitches span 7/8 in (2.2 cm). Horizontally, that matches the 5-stitch body plus one frame sc on each side. Vertically, the frame comes out at 3/4 in (1.9 cm). Blocking stretches it the extra 1/8 in (0.3 cm) to a true square, which centers the cross.
Hanging loop: Join the thread with a sl st in the peak ring. Ch 24, sl st in the ring. Work 30 sc into the ch-24 loop, then sl st in the ring and fasten off.
(24 sc, one per chain, + 6 extra = 30 sc)
The 6 extra stitches stop the covered loop from curling. It hangs 1 1/2 in (3.8 cm) above the peak.
Final Blocking
- Weave in all ends along nearby solid stitches, and trim them close.
- Soak the ornament in fabric stiffener (or wet it and spray it with heavy starch). Blot off the excess with a towel.
- Pin the eave straight at 3 7/8 in (9.8 cm), with one pin at each tip.
- Pin the base strip straight at 3 1/8 in (7.9 cm), centered under the eave. Then pin the point of each scallop.
- Check that each wall measures 1 1/2 in (3.8 cm) and stands vertical.
- Pin the peak ring centered above eave sc 16. Ease each spoke straight.
- Pin the window to a 7/8 in (2.2 cm) square, with its post straight up from loop 13.
- Pin the hanging loop straight up from the peak.
- Let it dry completely, at least 12 hours, before unpinning.
Final Quality-Control Checklist
- Base Row 1 has 25 sc; Row 2 has 3 shells; Row 3 has 43 sts.
- Each wall has 6 rows of 2 dc.
- Eave Row 2 has 31 sc.
- The roof has 7 covered lines meeting at the peak ring, with 96 sc total.
- The window frame has 24 sc, with a 7-st side count on all 4 sides.
- The window post is attached at free loop 13.
- The ornament measures 3 7/8 in (9.8 cm) × 3 3/4 in (9.5 cm).
- All ends are hidden, and the ornament hangs straight from the loop.
Troubleshooting
Walls lean inward: The ch-21 in the eave is tight. Work it with the larger hook, or loosen your chain tension.
The roof cups or buckles: The spoke chains are too long for your tension. Take out one chain per spoke, and check that the spoke lies flat before you sc back up.
Spokes sag after blocking: You need more stiffener. Re-soak the ornament and pin each spoke individually.
Scallops curl up: Row 3 is too tight. Rework it with looser stitches, or check that you put exactly 2 sc in each ch-1 space.
The window tilts: The post is off center. Make sure it goes into loop 13, which has exactly 12 loops on each side.
The window is rectangular: Block it firmly to a 7/8 in (2.2 cm) square while it is wet.
Care
Dust gently, or hand-wash in cool water and re-stiffen, pinning the ornament back to its blocking measurements. Store it flat between tissue paper so the spokes don’t bend.

Final Notes
The measurements build on each other. The 25-stitch base sets a 3 1/8 in (7.9 cm) footprint, and the walls rise from it to 1 1/2 in (3.8 cm). The 31-stitch eave spans 3 7/8 in (9.8 cm), with a 21-chain gap that keeps the walls parallel. The roof adds 1 1/2 in (3.8 cm) on spokes sized to the triangle. The 24-stitch frame squares the window at 7/8 in (2.2 cm). Check each of these as you go and the finished house will come out the right size.
Happy crocheting!