This curtain has a lace header in petrol blue with a pink scalloped edge and seven hanging strands. Each strand carries two ballerinas plus small pink flowers and bows, and ends in a blue teardrop drop. Every ballerina has a spiral head, a ribbed bodice, a pink loop-work tutu with a blue scalloped hem, and long legs that meet at a pointed toe. Her arms curve up over her head and end in a small hanging ring.
You only need two colors: a deep petrol (teal) blue for the structure and a soft peach-pink for the tutus, flowers, bows and header scallops. The style is light and airy. It works in a nursery, a dance-lover’s bedroom or a sunny reading nook.
The pattern uses US crochet terms. The finished curtain is 35.75 in (90.8 cm) wide and 40.25 in (102.2 cm) long, measured from the top of the header to the tip of the lowest drop.
Construction is modular. First you crochet 13 lace rosette squares and join them into a strip, then add a top and bottom border to finish the header. Next you make 14 ballerinas, 21 flowers, 21 bows and 7 drops. Last, you link everything together with slip-stitch cords.
Finished Size and Construction
- Finished size: 35.75 in (90.8 cm) wide x 40.25 in (102.2 cm) long
- Skill level: Intermediate
- Terminology: US crochet terms
- Yarn weight: DK (weight 3) cotton
- Hook: 3.75 mm (US F-5)
- Number of pieces: 13 header squares, 14 ballerinas, 21 flowers, 21 bows, 7 drops and 21 cords
- Layout: the header is 13 squares in one row (13 x 1). The 7 strands hang below squares 1, 3, 5, 7, 9, 11 and 13.
- Square size: 2.75 in (7.0 cm)
- Header size before border: 35.75 x 2.75 in (90.8 x 7.0 cm)
- Border depth: 0.5 in (1.3 cm) at the top and 1 in (2.5 cm) at the bottom, so the finished header is 4.25 in (10.8 cm) deep
- Ballerina size: 8.5 in (21.6 cm) tall x 4 in (10.2 cm) wide at the tutu
- Strand length: 36 in (91.4 cm) below the header
Materials
Use a smooth mercerized cotton in DK weight. It shows the stitches clearly, keeps the tutu loops open and stretches very little. Avoid fuzzy or very stretchy yarns, because the hanging strands would slowly get longer.
- Petrol blue: 250 g, about 600 m. Used for the squares, header border, ballerina bodies, legs, tutu hems, cords and drops.
- Peach-pink: 150 g, about 360 m. Used for the tutus, flowers, bows and header scallops.
Tools:
– 3.75 mm (US F-5) crochet hook
– Tapestry needle
– Stitch markers
– Measuring tape
– Rust-proof pins and a blocking mat
– Spray bottle and scissors
The yarn quantities include a margin of about 15% for swatching and weaving in ends.
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- tr – treble crochet
- MR – magic ring
- sk – skip
- sp – space
- st(s) – stitch(es)
- RS – right side
Special technique – back-bump cord: Make a chain. Then turn and work a sl st into the back bump of each chain (the bump is the ridge on the back of the chain). This gives a firm cord that looks braided and doesn’t stretch. You’ll use it for the arms, the legs and all the strand cords.
Gauge and Checkpoints
Gauge: 19 sc = 4 in (10.2 cm), and 5 ch = 1 in (2.5 cm).
Make one header square before anything else, and check its size after each round:
- After Round 1: 1.25 in (3.2 cm) across
- After Round 2: 1.75 in (4.4 cm) across
- After Round 3: 2.4 in (6.1 cm) from side to side
- After Round 4: 2.75 in (7.0 cm) per side
If the square is more than 0.25 in (0.6 cm) too big, go down one hook size. If it’s too small, go up one size. Also make one test ballerina. From the top ring to the toe point she should measure 8.5 in (21.6 cm).

Header Square (make 13, blue)
Round 1: MR, ch 3 (counts as dc), work 15 dc in the ring, then sl st to the top of the ch-3. (16 dc)
Round 2: Ch 1, sc in the same st, ch 3, sk 1, [sc in next st, ch 3, sk 1] 7 times, then sl st to the first sc. (8 sc, 8 ch-3 sps) This round makes the open rosette.
Round 3: Sl st into the first ch-3 sp. Ch 3 (counts as dc), then work (2 dc, ch 2, 3 dc) in the same sp to make a corner. Work 3 hdc in the next sp. [(3 dc, ch 2, 3 dc) in next sp, 3 hdc in next sp] 3 times. Sl st to the top of the ch-3. (24 dc + 12 hdc = 36 sts, plus 4 ch-2 corners. Each side has 9 sts between the corner spaces.)
Round 4: Ch 1, sc in each st, working 3 sc in each corner ch-2 sp, then sl st to the first sc. (36 sts worked 1-per-st + 12 corner sc = 48 sc)
The middle sc of each 3-sc group is the corner stitch. Each side has 13 sts, counting both corner stitches: corner + 1 + 9 + 1 + corner. To check: 4 x 13 − 4 shared corners = 48. Fasten off and leave an 8 in (20.3 cm) tail.
Ballerina (make 14)
Head (blue), worked in a continuous spiral:
- Round 1: 6 sc in MR. (6)
- Round 2: 2 sc in each st. (12)
- Round 3: [sc in next st, 2 sc in next st] 6 times. (18)
Sl st in the next st and fasten off. The head should be 1.25 in (3.2 cm) across.
Neck and bodice (blue), worked in rows: With RS facing, join the yarn to any st of Round 3. That spot becomes the bottom of the head.
- Row 1: Ch 1, sc in the same st and in the next 2 sts. (3)
- Row 2: Ch 1, turn, sc in each st. (3)
- Row 3: Ch 1, turn, 2 sc in the first st, sc in the next st, 2 sc in the last st. (5)
- Row 4: Ch 1, turn, 2 sc in the first st, sc in the next 3 sts, 2 sc in the last st. (7)
- Rows 5–6: Ch 2 (does not count as a st), turn, hdc in each st. (7)
The hdc rows give the bodice its ribbed look. Fasten off. The bodice should be 1.5 in (3.8 cm) wide.
Arms: With RS facing, join blue to the right end of Row 4. Ch 20. Then ch 6 and sl st in the 6th ch from the hook to make the top ring. Ch 20 more and sl st to the left end of Row 4.
Turn. Sl st in the back bump of each of the next 20 ch. Work 8 sc into the top ring. Sl st in the back bump of each of the next 20 ch, then sl st to the starting point. (40 sl st + 8 sc) The arms form an open oval around the head and connect to the body only at the bodice.
Tutu (pink): With RS facing, join pink to the first st of Row 6 and work into the bottom edge of the bodice.
- Row 1: Ch 4 (counts as tr), ch 2, tr in the same st, [ch 2, tr in next st] 5 times, ch 2, then work (tr, ch 2, tr) in the last st. (9 tr, 8 ch-2 sps) The doubled spokes at each end make the tutu fan out.
- Row 2: Ch 1, turn, sc in the first tr, [ch 4, sc in next tr] 8 times. (9 sc, 8 ch-4 arches)
- Row 3: Ch 1, turn, sc in the first sc, [ch 6, sc in next sc] 8 times. (9 sc, 8 ch-6 loops)
Fasten off pink.
- Row 4 (blue hem): With RS facing, join blue in the first sc of Row 3. Ch 1, sc in the same sc, then [(2 sc, hdc, 3 dc, hdc, 2 sc) in next ch-6 loop, sc in next sc] 8 times. (9 sc + 8 scallops x 9 sts = 81 sts)
Fasten off. Number the 9 sc that sit between the scallops from 1 to 9, going right to left.
Legs and toe (blue): Join blue in sc 4 of Row 4. Ch 15. Then ch 4 and sl st in the 4th ch from the hook to make the toe ring. Ch 15 more and sl st in sc 6.
Turn. Sl st in the back bump of each of the next 15 ch. Work (2 sc, hdc, ch 2, hdc, 2 sc) in the toe ring. Sl st in the back bump of each of the next 15 ch, then sl st to sc 4 and fasten off. The legs are 3 in (7.6 cm) long and meet at the pointed ch-2 toe.
Small Pieces
Flower (make 21, pink): MR, then [ch 2, 2 dc, ch 2, sl st] 5 times in the ring. (5 petals) Pull the ring closed. The flower is 0.75 in (1.9 cm) across.
Bow (make 21, pink): Ch 26. Sl st in the 2nd ch from the hook and in each ch across. (25 sl st) Lay the cord flat and form two loops, each 0.75 in (1.9 cm) wide, with the two ends crossing below as tails. Wrap the center 4 times with a pink tail and secure it. The bow is 1.5 in (3.8 cm) wide.
Drop (make 7, blue): Ch 6 and sl st to the first ch to make a ring. Work (3 sc, hdc, dc, ch 2, dc, hdc, 3 sc) in the ring, then sl st to the first sc. (10 sts plus the ch-2 point) The joining sl st is the top of the drop. The drop is 1 in (2.5 cm) long.
Make All Pieces
- Blue: 13 header squares; the heads, bodices, arms, tutu hems and legs for 14 ballerinas; 7 drops; 21 cords (made during assembly)
- Pink: 14 tutus, 21 flowers, 21 bows and the header scallop row
Layout (S = square, ↓ = strand):
[S1][S2][S3][S4][S5][S6][S7][S8][S9][S10][S11][S12][S13]
↓ ↓ ↓ ↓ ↓ ↓ ↓
Each strand, from top to bottom: cord (with flower and bow), ballerina, cord (with flower and bow), ballerina, cord (with flower and bow), drop.
Joining
Lay out the 13 squares in a row with RS up. Hold two neighboring squares with RS together. Whipstitch through the back loops of the matching sides, stitch to stitch, from corner stitch to corner stitch: 13 sts to 13 sts. Join all 12 seams the same way.
Keep your tension even and don’t pull each stitch tight. The seams should lie flat without puckering or gaps.
Checkpoint: The strip should measure 35.75 x 2.75 in (90.8 x 7.0 cm). Each long edge has 13 x 13 = 169 sts. No stitches are added at the seams, because each square’s 13 sts already include its corners.
Border
The border uses the same gauge as the squares: 19 sc = 4 in (10.2 cm). Each sc row adds 0.25 in (0.6 cm).
Top Row 1 (blue): With RS facing, join to the top-right corner st. Ch 1, sc in each st across. (13 squares x 13 sts = 169 sc)
Top Row 2 (blue hanging loops): Ch 1, turn. Sc in each st across. In sts 7, 33, 59, 85, 111, 137 and 163 (the center st of each odd-numbered square), work (sc, ch 10, sc) instead of a single sc. (169 sts worked 1-per-st + 7 extra sc = 176 sc, plus 7 ch-10 loops) Fasten off. The loops are 1 in (2.5 cm) tall and fit onto curtain rings or slide over the rod.
Bottom Row 1 (blue): With RS facing, join to the bottom corner st. Ch 1, sc in each st across. (169 sc) Fasten off.
Bottom Row 2 (pink scallops): With RS facing, join pink to the first st. Work one scallop over each square’s 13 sts:
Sc in st 1, sk 2, dc in st 4, 2 dc in st 5, 2 dc in st 6, 3 dc in st 7, 2 dc in st 8, 2 dc in st 9, dc in st 10, sk 2, sc in st 13.
Each scallop has 9 sts worked once + 6 extra sts = 15 sts. Repeat across all 13 squares. (13 x 15 = 195 sts) Fasten off.
Why the math works: 169 = 13 squares x 13 sts, so each scallop sits exactly on one square. The hanging loops repeat every 26 sts (every two squares), so each loop sits directly above a strand. This lets each strand hang straight from its loop.
Strand Assembly
Every cord is made the same way. Join blue at the upper point and ch 30, then sl st into the lower point. Turn, sl st in the back bump of each ch back up to the start, and fasten off. Each cord is 6 in (15.2 cm) long.
- Cord 1: from the middle dc of the 3-dc group in scallops 1, 3, 5, 7, 9, 11 and 13 to the top ring of the first ballerina.
- Cord 2: from that ballerina’s toe point to the top ring of the second ballerina.
- Cord 3: from the second ballerina’s toe point to the top of the drop.
On each cord, sew a flower 2 in (5.1 cm) below the top and a bow 4 in (10.2 cm) below the top.
Checkpoint: 6 + 8.5 + 6 + 8.5 + 6 + 1 = 36 in (91.4 cm) per strand.
Final Blocking
- Weave in all ends.
- Pin the header to 35.75 x 4.25 in (90.8 x 10.8 cm), pinning out every scallop point and every hanging loop.
- Pin each ballerina to 8.5 x 4 in (21.6 x 10.2 cm). Use pins to open each tutu loop, and shape the arm oval evenly around the head.
- Mist with water until damp but not soaked.
- Let everything dry completely, for at least 12 hours.
- Hang the curtain and let it settle for a day before you check the strand lengths.
Final Quality-Control Checklist
- 13 squares, each 2.75 in (7.0 cm) with 48 sc in Round 4
- Header measures 35.75 x 4.25 in (90.8 x 10.8 cm)
- Top Row 2 has 176 sc and 7 loops. Bottom Row 2 has 195 sts and 13 scallops.
- 14 ballerinas, each with 81 sts in the hem and legs joined at sc 4 and sc 6
- 7 strands, each 36 in (91.4 cm) long, hanging under the odd-numbered squares
- Each strand has 3 flowers, 3 bows, 2 ballerinas and 1 drop
Troubleshooting
- Squares cup: Your Round 3 stitches are too tight. Loosen your tension or go up one hook size.
- Squares ruffle: Check that each corner has exactly 3 sc.
- Tutu won’t fan out: Make sure both ends of Row 1 have the doubled (tr, ch 2, tr).
- Arms flop onto the head: Work the back-bump sl sts snugly, and block the oval open.
- Strands twist: Steam the cords lightly while the curtain hangs.
- Header sags: Add a sc row to the bottom border.
Care
Hand wash in cool water with mild soap. Roll the curtain in a towel to remove water, dry it flat and re-block it. Never put it in the dryer.

Final Notes
Measurement chain:
– Each square is 2.75 in (7.0 cm) with 13 sts per side.
– Thirteen squares make a 35.75 in (90.8 cm) strip with 169 sts per long edge.
– The border brings the header to 4.25 in (10.8 cm) deep.
– Seven 36 in (91.4 cm) strands bring the curtain to 40.25 in (102.2 cm) long.
Happy crocheting!