Daisy Lattice Plastic Bag Holder Crochet Pattern

Plastic bags pile up quickly, and this holder keeps them in one tidy, pretty place. The Daisy Lattice Bag Holder is a tall tube with an open diamond mesh. You stuff bags in at the top and pull them out one at a time through an oval slot near the bottom.

The palette is soft and fresh. The lattice body is sage green, and the base, lower band, top rim and hanging strap are cream. Three cream daisies with mustard centers run down the front, each one flanked by two leaf-green leaves. The look is cottage-style and works in a kitchen, pantry or laundry room.

The pattern uses US crochet terms. The finished holder is about 4.75 in (12.1 cm) across and about 14 in (35.6 cm) tall. The strap adds about 4.5 in (11.4 cm), for a total hanging length of about 18.5 in (47.0 cm).

You work the holder in one piece from the bottom up. First comes a flat round base, then a solid cream band with the slot, then the green lattice mesh, then the cream top rim, and finally a strap worked straight off the rim. The daisies and leaves are made separately and sewn on.

Finished Size and Construction

  • Finished size: 4.75 in (12.1 cm) diameter × 14 in (35.6 cm) tall body; 18.5 in (47.0 cm) total hanging length
  • Skill level: Easy–Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 4.5 mm (US 7)
  • Number of pieces: 1 main body, plus 3 daisies and 6 leaves as appliqués
  • Layout: Single tube; daisies stacked vertically on the front center
  • Body circumference: 15 in (38.1 cm), 60 sts
  • Height before top band: about 12.75 in (32.4 cm)
  • Top band depth: about 1.25 in (3.2 cm)

Materials

Use a smooth worsted-weight cotton or cotton blend at about 170 m per 100 g. Cotton holds the tube’s shape and doesn’t stretch out under the weight of the bags.

  • Sage green (A): 40 g / 68 m, for the mesh body
  • Cream (B): 50 g / 85 m, for the base, bands, slot edging, strap and daisy petals
  • Mustard (C): 5 g / 9 m, for the daisy centers
  • Leaf green (D): 10 g / 17 m, for the leaves

Tools:
– 4.5 mm (US 7) crochet hook
– 2 in (5.1 cm) wooden ring
– Tapestry needle
– Stitch markers
– Scissors
– Measuring tape
– Pins

All quantities include a margin of about 20%.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • sc2tog – single crochet 2 together
  • BLO – back loop only
  • MR – magic ring
  • sp – space
  • st(s) – stitch(es)

Special stitch – Lattice arch: ch 5, then sc in the next ch-5 space. Rows of these arches stacked on top of each other form the diamond net.

Gauge and Checkpoints

  • Single crochet: 16 sc and 18 rounds = 4 in (10.2 cm)
  • Lattice mesh: 4 rounds = 3 in (7.6 cm) in height; each arch spans about 1 in (2.5 cm) around the tube

Treat the base as your test piece. Once it is finished, measure it before you go any further.

Checkpoints:
– After Rnd 5: about 2.4 in (6.1 cm) across
– After Rnd 10: 4.75 in (12.1 cm) across
– After Rnd 20: side wall about 2.25 in (5.7 cm) tall
– After 8 mesh rounds: mesh about 6 in (15.2 cm) tall
– After the top band: body about 14 in (35.6 cm) tall

If the base is more than 0.25 in (0.6 cm) too large, go down one hook size. If it is too small, go up one hook size. Always keep the stitch counts the same.

Detailed view of cream and sage crocheted piece with wooden handles and white daisy flower accent.

Base (Color B)

Work in joined rounds. Join each round with a sl st to the first sc. Ch 1 at the start of each round does not count as a stitch.

Rnd 1: In MR, work 6 sc. (6)
Rnd 2: Inc in each st around. (12)
Rnd 3: (Sc 1, inc) × 6. (18)
Rnd 4: (Sc 2, inc) × 6. (24)
Rnd 5: (Sc 3, inc) × 6. (30)
Rnd 6: (Sc 4, inc) × 6. (36)
Rnd 7: (Sc 5, inc) × 6. (42)
Rnd 8: (Sc 6, inc) × 6. (48)
Rnd 9: (Sc 7, inc) × 6. (54)
Rnd 10: (Sc 8, inc) × 6. (60)

The base should lie flat and measure 4.75 in (12.1 cm) across. If it ruffles, check your stitch counts. If it cups, your tension is too tight.

Lower Band and Dispensing Slot (Color B)

Rnd 11: Ch 1, sc in BLO of each st around. (60) This makes a crisp fold line between the base and the wall.
Rnds 12–13: Ch 1, sc in each st around. (60)

Slot rows: You now work back and forth over 50 stitches. The 10 stitches you leave unworked become the bottom edge of the slot.

Row 14 (RS): Ch 1, sc in the next 50 sts, turn. Leave the last 10 sts unworked. (50)
Rows 15–18: Ch 1, sc in each of the 50 sts, turn. (50 each row)

Row 18 is a RS row and ends at the 50th stitch. Do not turn.

Rnd 19: Ch 10. Sl st to the first sc of Row 18 to close the gap. Ch 1, sc in each of the 50 sts, then sc in each of the 10 chains. (50 + 10 = 60)
Rnd 20: Ch 1, sc in each st around. (60)

The slot is 2.5 in (6.4 cm) wide and about 1.1 in (2.8 cm) tall. The wall should now be about 2.25 in (5.7 cm) high. Fasten off B.

Lattice Body (Color A)

Rnd 21: Join A in any st above the slot center. Sc in the same st. Ch 5, skip 3 sts, sc in the next st. Repeat from * around, ending with ch 5, skip 3. Sl st to the first sc. (15 sc, 15 ch-5 spaces)

Check: 15 arches × 4 sts each = 60. That uses every base stitch.

Rnd 22: Sl st in each of the first 3 ch to reach the center of the first arch. Ch 1, sc in the same ch-5 sp. Ch 5, sc in the next ch-5 sp. Repeat from * around, ending with ch 5, sl st to the first sc. (15 arches)

Rnds 23–34: Repeat Rnd 22. (15 arches each round, 14 mesh rounds in total)

Each round’s single crochets sit in the centers of the arches below, so the open spaces form diamonds. The mesh should be about 10.5 in (26.7 cm) tall. Don’t fasten off A yet if you want a neater color change: pull B through on the final sl st.

Top Band and Slot Edging (Border)

The border gauge is the same as the sc gauge: 16 sts = 4 in (10.2 cm).

Rnd 35 (conversion round, Color B): Ch 1. Work 4 sc in each ch-5 sp around, skipping the sc between the spaces. (15 spaces × 4 sc = 60) Sl st to join.

Rnds 36–40: Ch 1, sc in each st around. (60)

The top band is 6 rounds and about 1.25 in (3.2 cm) deep. Fasten off with a long tail and weave it in.

Why the math works: The base, the lower band, the mesh (15 arches × 4) and the top band all hold the same 60-stitch count. That gives a 15 in (38.1 cm) circumference all the way up, so the tube stays straight instead of flaring or pinching.

Slot edging (Color B): With the RS facing, join B at one bottom corner of the slot.
– Work 10 sc along the bottom edge (the 10 unworked sts of Rnd 13).
– Work 5 sc up the side, 1 per row-end.
– Work 10 sc along the top edge (into the back of the Rnd 19 chains).
– Work 5 sc down the other side.

Sl st to the first sc. (10 + 5 + 10 + 5 = 30) This round frames the slot as a smooth cream oval.

Hanging Strap (Color B)

Flatten the tube so the slot sits at the front center. Mark the 8 center stitches of Rnd 40 on the back.

Row 1: Join B in the first marked st. Ch 1, sc in each of the 8 marked sts, turn. (8)
Rows 2–4: Ch 1, sc across, turn. (8)
Row 5: Ch 1, sc2tog, sc 4, sc2tog, turn. (6)
Rows 6–26: Ch 1, sc across, turn. (6)

The strap is 1.5 in (3.8 cm) wide and about 5.75 in (14.6 cm) long. Fold the last 6 rows, about 1.25 in (3.2 cm), through the wooden ring to the WS. Whipstitch them down firmly, 1 stitch per stitch. The visible strap is about 4.5 in (11.4 cm) long.

Daisies (Make 3)

Rnd 1 (Color C): In MR, work 8 sc. Pull the ring tight and sl st to the first sc. (8) The center is about 0.5 in (1.3 cm) across. Fasten off C.

Rnd 2 (Color B): Join B in any sc. Ch 4. Starting in the 2nd ch from the hook, work sc, hdc, dc. Sl st in the next sc of Rnd 1. Repeat from * 8 times in total. (8 petals)

Each daisy is about 2 in (5.1 cm) across. Leave an 8 in (20.3 cm) tail for sewing.

Leaves (Make 6, Color D)

Ch 8. Starting in the 2nd ch from the hook, work along the chain:
– sc, hdc, dc, dc, hdc, sc (6 sts)
– 3 sc in the last ch to make the tip

Then work back along the other side of the chain:
– sc, hdc, dc, dc, hdc, sc (6 sts)
– sl st in the first ch

(6 + 3 + 6 + 1 sl st = 16)

Each leaf is about 1.75 in (4.4 cm) long. Leave a sewing tail.

Assembling the Appliqués

  1. Flatten the holder with the slot at the front center.
  2. Pin the daisies in a vertical line directly above the slot:
  3. Lowest daisy: centered 1.75 in (4.4 cm) above the start of the mesh
  4. Middle daisy: centered 3.5 in (8.9 cm) above the lowest
  5. Top daisy: centered 3.5 in (8.9 cm) above the middle, which leaves 1.75 in (4.4 cm) below the top band
  6. Tuck one leaf behind each side of each daisy, with the base slightly under the petals and the tip pointing outward and slightly upward.
  7. Sew the leaves first, using small stitches along their centerlines, and anchor them to the mesh sc.
  8. Sew each daisy around its center and at the base of each petal.
  9. Keep your stitches loose enough that the mesh does not pucker.

Final Blocking

  1. Lightly mist the holder with water.
  2. Slide a tall cylinder about 4.75 in (12.1 cm) across into the tube, such as a rolled towel or an oatmeal canister.
  3. Gently straighten the lattice so the diamonds are even all the way around.
  4. Pin the daisy petals flat and shape the leaf tips to points.
  5. Lay the strap flat.
  6. Let it dry fully, then remove the form.

Final Quality-Control Checklist

  • The base lies flat at 4.75 in (12.1 cm) across
  • Each round from the base up holds 60 sts or 15 arches
  • The slot is 2.5 in (6.4 cm) wide and edged with 30 sc
  • The mesh is 10.5 in (26.7 cm) tall, with even diamonds
  • The top band has 6 rounds and is flat, not ruffled
  • The strap is centered on the back and the ring is securely sewn
  • The 3 daisies are centered over the slot, with an even 3.5 in (8.9 cm) between centers
  • All ends are woven in securely

Troubleshooting

  • Tube flares at the top: Your Rnd 35 probably has more than 4 sc in some spaces. Recount to 60.
  • Mesh pulls inward: Your chains are too tight. Chain more loosely, or go up a hook size for the mesh only.
  • Slot sags open: Work the slot edging a little more firmly, keeping it at 30 sc.
  • Strap stretches: Use a tighter tension or a 4 mm hook for the strap rows.
  • Daisies cup: Your petal chains are too tight. Loosen the ch 4, then block flat.
  • Spiral seam drifts: Shift the joining point slightly each round, or hide it at the back.

Care

Hand wash in cool water, press out the water in a towel, and reshape over a form to dry flat. Don’t tumble dry, or the cotton may shrink.

Crocheted sage-green bag with white daisy appliqués and wooden ring handle holding blue plastic bags on a white wall.

Final Notes

Here is the measurement chain in order:
– The 60-stitch base is 4.75 in (12.1 cm) across.
– The cream wall with the slot rises 2.25 in (5.7 cm).
– Fifteen lattice arches keep the same 60-stitch circumference for 10.5 in (26.7 cm).
– The 60-stitch cream band adds 1.25 in (3.2 cm), for a 14 in (35.6 cm) body.
– The strap brings the total hanging length to 18.5 in (47.0 cm).

If your gauge matches at each checkpoint, the finished holder will match too. For a second holder, try a periwinkle-blue mesh with the same cream, mustard and leaf-green accents.

Happy crocheting!

Leave a Comment