Rose Trellis Plastic Bag Holder Crochet Pattern

The Rose Trellis Bag Holder is a pretty, practical way to store plastic grocery bags. It’s a soft cylinder that hangs from a wooden ring. You stuff bags in at the open top and pull them out one at a time through an oval slot near the bottom.

The colors are cream, dusty rose, sage green and pale blush pink. The bottom and top are solid cream bands, and the middle is an airy dusty-rose lattice that lets the bags show through. On the front, three rolled roses and a few pointed leaves give it a cottage-garden look.

This pattern uses US crochet terms. The finished holder is about 4.75 in (12.1 cm) across and about 10.75 in (27.3 cm) tall, not counting the strap and ring.

The holder is worked from the bottom up in joined rounds. You start with a flat circle base, then single crochet straight up and work the slot in a few turned rows. After that comes the V-stitch mesh, and you finish with a solid cream rim. The strap, roses and leaves are made separately and sewn on.

Finished Size and Construction

  • Finished size: 4.75 in (12.1 cm) diameter × 10.75 in (27.3 cm) tall
  • Circumference: 15 in (38.1 cm)
  • Skill level: Easy-intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton or cotton blend
  • Hook: H-8 (5.0 mm)
  • Number of pieces: 1 holder body, plus 1 strap, 3 roses and 5 leaves sewn on
  • Layout: Single vertical cylinder; the slot and roses face the front, the strap is at the back
  • Base size: 4.75 in (12.1 cm) flat circle, 60 sts
  • Size before border (top rim): 9.5 in (24.1 cm) tall
  • Border (rim) depth: about 1.3 in (3.3 cm), 6 rounds

Materials

Use a smooth, worsted-weight cotton or cotton blend. Cotton keeps its shape when loaded with bags and makes the rose petals look crisp. Avoid fuzzy acrylic, which hides the lattice.

  • Cream (A): 55 g / 94 m
  • Dusty rose (B): 65 g / 111 m
  • Sage green (C): 8 g / 14 m
  • Pale blush pink (D): 5 g / 9 m

Tools:
– H-8 (5.0 mm) crochet hook
– Wooden ring, 2 in (5.1 cm) across
– Tapestry needle
– Stitch marker
– Scissors
– Measuring tape
– Rust-proof pins

These amounts include a margin of about 15% for a gauge swatch and the sewing tails.

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • inc – 2 sc in the same stitch
  • BLO – back loop only
  • sp – space
  • st(s) – stitch(es)
  • rnd – round

Special stitch – V-stitch (V-st): (dc, ch 1, dc) in the same stitch or space.

Gap: the space between two neighboring V-sts in the round below, sitting between the second dc of one V and the first dc of the next V.

Gauge and Checkpoints

Sc gauge: 16 sts × 18 rnds = 4 in (10.2 cm).
V-st gauge: 5 V-sts (15 sts wide) = 3.75 in (9.5 cm); 8 V-st rnds = 4 in (10.2 cm).

Crochet the base first and measure it before you go on. It works as your gauge test.

Checkpoints:
1. After Rnd 10, the base is a flat circle 4.75 in (12.1 cm) across.
2. After Rnd 21, the cream band stands about 2.5 in (6.4 cm) tall.
3. After Rnd 35, the holder is about 9.5 in (24.1 cm) tall.
4. After Rnd 41, the holder is about 10.75 in (27.3 cm) tall.

If your base is too big, go down to a G-6 (4.0 mm) hook. If it’s too small or cups upward, go up to an I-9 (5.5 mm). Change the hook rather than the stitch counts, because everything depends on the 60-stitch circumference.

Crocheted roses in dusty mauve and cream with green leaves on an openwork lattice background.

Holder Body

Join every round with a sl st to the first st. Start each round with ch 1, which does not count as a stitch, unless the pattern says otherwise.

Base (Color A)

Rnd 1: Make a magic ring and work 6 sc into it. Join. (6 sts)
Rnd 2: Inc in each st. (12 sts)
Rnd 3: Sc 1, inc 6 times. (18 sts)
Rnd 4: Sc 2, inc 6 times. (24 sts)
Rnd 5: Sc 3, inc 6 times. (30 sts)
Rnd 6: Sc 4, inc 6 times. (36 sts)
Rnd 7: Sc 5, inc 6 times. (42 sts)
Rnd 8: Sc 6, inc 6 times. (48 sts)
Rnd 9: Sc 7, inc 6 times. (54 sts)
Rnd 10: Sc 8, inc 6 times. (60 sts)

Checkpoint: the circle measures 4.75 in (12.1 cm) across.

Lower Band with Slot (Color A)

Rnd 11: Sc in BLO of each st. (60 sts) This leaves a ridge that turns the work upward and makes a neat base edge.
Rnds 12–14: Sc in each st. (60 sts)

Fold the work flat so the round’s join is at the center back. Place a marker in the 12 center-front stitches, which are sts 25–36 of the round.

Row 15: Ch 1, sc in the next 24 sts. Skip the 12 marked sts and sc in the last 24 sts. Turn. (48 sts)

Wait — the skipped stitches have to stay open across all the slot rows. So work Row 15 like this instead: ch 1, sc in sts 37–60, then continue around through the join and sc in sts 1–24. Turn. (48 sts) The 12 front stitches stay unworked.

Rows 16–17: Ch 1, sc in each of the 48 sts. Turn. (48 sts)
Rnd 18: Ch 1, sc in each of the 48 sts. Ch 12 loosely across the gap, then sl st to the first sc to close the round. (48 sc + 12 ch = 60 sts)
Rnd 19: Sc in each sc and in each ch. (60 sts)
Rnds 20–21: Sc in each st. (60 sts)

Checkpoint: the cream band is about 2.5 in (6.4 cm) tall, and the slot is 3 in (7.6 cm) wide and about 0.75 in (1.9 cm) high.

Slot edging: Join A at one bottom corner of the slot. Work 12 sc along the bottom edge, 3 sc up the side, 12 sc into the chain and 3 sc down the other side. Join. (30 sts) Fasten off. This round keeps the slot firm and oval.

Trellis Mesh (Color B)

Join B with the last sl st of Rnd 21. Cut A.

Rnd 22: Ch 4 (counts as dc + ch 1) and dc in the same st. Skip 2 sts, V-st in the next st 19 times. Skip 2 sts and join to the 3rd ch of the starting ch-4. (20 V-sts)

Math check: 20 V-sts × 3 sts each = 60 sts.

Rnd 23: Sl st into the ch-1 sp, then sl st into the next dc and into the gap after it. Ch 4 and dc in the same gap. Work a V-st in each remaining gap around, then join. (20 V-sts)

Rnds 24–35: Repeat Rnd 23. (20 V-sts each round)

Working each V into the gap, rather than into the V below, shifts the stitches by half a repeat every round. That’s what creates the diamond lattice.

Checkpoint: the mesh measures 7 in (17.8 cm), and the holder is 9.5 in (24.1 cm) tall. Fasten off B.

Border (Top Rim, Color A)

Rim gauge: same as the sc gauge, 16 sts and 18 rnds = 4 in (10.2 cm).

Rnd 36 (conversion round): Join A in any dc. Sc in each dc and in each ch-1 sp around. (40 sc into the dc + 20 sc into the ch-1 sps = 60 sts)

There are no corners on a cylinder. To check your count, think of the round in 4 equal quarters of 5 V-sts each, which gives 15 sts per quarter and 60 total.

Rnds 37–41: Sc in each st. (60 sts; 15 per quarter)

Finish with an invisible join and weave in the ends.

Why the math works: the base, the lower band, the mesh (20 × 3) and the rim are all 60 stitches. The holder therefore stays a straight tube with no flare or pinch at the color changes. Six rim rounds at 4.5 rounds per inch add about 1.3 in (3.3 cm), for a final height of 10.75 in (27.3 cm).

Hanging Strap (Color B)

Row 1: Ch 6. Sc in the 2nd ch from the hook and in each ch across. (5 sts)
Rows 2–32: Ch 1, sc in each st. Turn. (5 sts)

The strap is 1.25 in (3.2 cm) wide and about 7 in (17.8 cm) long. Leave a long tail.

Pass the strap through the wooden ring and fold it in half. Line up both ends on the inside of the back rim, directly opposite the slot, so they overlap the rim by 1.25 in (3.2 cm). Sew around the edges through all layers. The ring should sit about 2.25 in (5.7 cm) above the rim.

Roses and Leaves

Large rose (B), make 1:
Row 1: Ch 34. Sc in the 2nd ch from the hook and in each ch across. (33 sts)
Row 2: Ch 1 and sc in the first st. Skip 1, 5 dc in the next st, skip 1, sc in the next st 8 times. (8 petals)

Starting at the beginning of the strip, roll it up tightly with the petals on top. Stitch through the base layers to hold the roll. It should measure about 2.25 in (5.7 cm) across.

Small rose (make 1 in B and 1 in D):
Row 1: Ch 22. Sc in the 2nd ch from the hook and in each ch across. (21 sts)
Row 2: Work as for the large rose, repeating the petal section 5 times. (5 petals)

Roll and stitch the same way. Each small rose is about 1.5 in (3.8 cm) across.

Leaf (C), make 5: Ch 8. Working into the 2nd ch from the hook: sc, hdc, dc, dc, hdc, sc, then 3 sc in the last ch. Rotate and work along the other side of the chain: sc, hdc, dc, dc, hdc, sc. Sl st to the first sc. (15 sts)

Each leaf is about 1.75 in (4.4 cm) long and pointed at both ends.

Placement: with the slot facing you, sew the large rose to the center of the mesh, about 3 in (7.6 cm) above the cream band. Sew the pale pink rose up and to the right of it, and the small dusty-rose rose down and to the left. Tuck the 5 leaves around the roses so their tips point outward. Sew through the V-sts from the inside so the lattice doesn’t pucker.

Final Blocking

  1. Lightly mist the holder, or dampen and gently squeeze out the water.
  2. Slide a 4.5–5 in (11.4–12.7 cm) round object inside, such as a rolled towel or a tall canister.
  3. Straighten the mesh columns and even out the diamonds.
  4. Pin the slot into an oval and flatten the rose petals with your fingers.
  5. Let it dry completely before hanging it or filling it with bags.

Final Quality-Control Checklist

  • Base is flat and measures 4.75 in (12.1 cm).
  • Every main round has 60 sts, and every mesh round has 20 V-sts.
  • Slot is centered at the front, 3 in (7.6 cm) wide, with an even edging.
  • Lattice diamonds alternate cleanly, and there are no stacked columns.
  • Rim lies straight, with no flare.
  • Strap is centered at the back, opposite the slot, and sewn through all layers.
  • Roses are sewn securely and leaves lie flat.
  • All ends are woven in.

Troubleshooting

  • Base curls into a bowl: your tension is too tight. Go up a hook size or loosen your increases.
  • Base ruffles: your tension is too loose, or you’ve added extra increases. Recount each round.
  • Mesh flares out: your dc are too tall. Go down half a hook size just for the mesh.
  • Columns stack instead of forming diamonds: you’re working into the V instead of the gap.
  • Slot sags: add a second round of sc edging or tighten the ch-12.
  • Holder leans when full: check that the strap is sewn exactly opposite the slot.

Care

Hand wash in cool water and lay flat to dry, reshaping it over a round form. Do not tumble dry, because the roses can lose their shape.

Crocheted plastic bag dispenser in cream and mauve with appliqué roses and leaves, hanging from wooden ring handle.

Final Notes

The measurement chain is:
– base: 60 sts and 4.75 in (12.1 cm)
– cream band: 2.5 in (6.4 cm)
– mesh: 20 V-sts and 7 in (17.8 cm), reaching 9.5 in (24.1 cm) total
– rim: 60 sts and 1.3 in (3.3 cm), for a finished height of 10.75 in (27.3 cm)

If you match the base checkpoint, the rest of the holder will line up. For the sage-green version, swap B for C and add sage-green and pale pink roses.

Happy crocheting!

Leave a Comment