The Evergreen Cascade Tree Curtain is a light, lacy window hanging made from small crochet Christmas trees. Each tree has three tiers. Every tier opens into airy chain-space windows and ends in a soft scalloped edge, so the trees look like snow-dusted branches when light shines through them.
The palette is classic: deep pine green and warm cream, set in alternating strands. Natural wooden beads separate the trees, and a full tassel finishes each strand. The style is Scandinavian-meets-boho, and it works in a window, a doorway or a bare wall.
This pattern uses US crochet terms. The finished curtain is 33.25 in (84.5 cm) wide and 41.5 in (105.4 cm) long, measured from the top of the rod to the tassel tips. Each tree is 3.25 in (8.3 cm) wide and 3.5 in (8.9 cm) tall, not counting its loops.
You work each tree flat in rows from the tip down, then add a slip-stitch border that also covers both loops. The trees are then linked into strands with short beaded chain connectors. Tassels are tied on last, and each strand loops over the rod.
Finished Size and Construction
- Finished curtain: 33.25 in (84.5 cm) wide × 41.5 in (105.4 cm) long
- Skill level: Easy-intermediate
- Terminology: US
- Yarn weight: DK (3) cotton
- Hook: 3.5 mm (E-4)
- Number of pieces: 54 tree motifs (30 green, 24 cream) plus 9 tassels
- Layout: 9 strands × 6 trees, colors alternating G-C-G-C-G-C-G-C-G
- Piece size: 3.25 in (8.3 cm) wide × 3.5 in (8.9 cm) tall; 4.75 in (12.1 cm) tall including both loops
- Size before border: 3 in (7.6 cm) wide × 3.25 in (8.3 cm) tall
- Border depth: 0.125 in (0.3 cm) per edge
Materials
Use a smooth mercerized or combed DK cotton of about 210 m per 100 g. Cotton shows the windows and scallops clearly and blocks crisply. Avoid fuzzy yarns, because they blur the lace.
- Pine green: 150 g (315 m)
- Cream: 120 g (252 m)
These quantities include a margin of about 15% for gauge swatches and tassel trimming.
Tools
– 3.5 mm (E-4) crochet hook
– 63 natural wooden beads, 12 mm, with holes of at least 4 mm
– Wooden curtain rod, 36 in (91.4 cm) long and 0.75 in (1.9 cm) in diameter
– Cardboard strip 4.5 in (11.4 cm) wide, for tassels
– Tapestry needle and a big-eye beading needle or needle threader
– Scissors, rust-proof pins, blocking mat, spray bottle
– Optional: light spray starch
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sp – space
- st(s) – stitch(es)
- tch – turning chain
- RS – right side
Special stitch – Shell: 5 dc worked into the same space.
V-st: (dc, ch 2, dc) worked into the same stitch or space.
Gauge and Checkpoints
Gauge: 20 dc and 10 dc rows = 4 in (10.2 cm).
Make one complete tree, including its border, before you start the full set. With 54 trees, a small gauge error adds up quickly.
Measure the tree flat, without stretching it:
- After Row 3: 1.75 in (4.4 cm) wide × 1.25 in (3.2 cm) tall
- After Row 6: 2.5 in (6.4 cm) wide × 2.25 in (5.7 cm) tall
- After Row 9: 3 in (7.6 cm) wide × 3.25 in (8.3 cm) tall
- After the border: 3.25 in (8.3 cm) wide × 3.5 in (8.9 cm) tall
If your tree is more than 0.25 in (0.6 cm) too big, go down to a 3.25 mm hook. If it is too small, go up to a 3.75 mm hook. Height matters most, because each tree’s height is repeated six times down a strand.

Tree Motif
Make 30 in green and 24 in cream. The turning ch 3 counts as a dc throughout. Turn at the end of every row.
Hanging loop: Ch 10, then sl st in the first ch to form a loop.
Tier 1
Row 1 (RS): Ch 3, then work (dc, ch 2, 2 dc) in the same ch you joined into. (4 dc, 1 ch-2 sp)
Row 2: Ch 3, dc in next dc, ch 2, V-st in ch-2 sp, ch 2, dc in next dc, dc in top of tch. (6 dc, 3 ch-2 sps)
Row 3: Ch 1, sc in first dc, skip next dc, shell in next ch-2 sp, skip next dc, sc in next ch-2 sp, skip next dc, shell in next ch-2 sp, skip next dc, sc in top of tch. (13 sts: 10 dc + 3 sc; 2 shells)
Tier 2
Row 4: Sl st in first sc and next 3 dc, so you are in the center dc of the first shell. Ch 5 (counts as dc + ch 2), skip next 2 dc, V-st in next sc, ch 2, skip next 2 dc, dc in next dc (the center of the second shell). Leave the remaining 3 sts unworked. (4 dc, 3 ch-2 sps)
The unworked sc + 2 dc on each side stay free and become the overhanging scallop tips of Tier 1.
Row 5: Ch 3, dc in same st, ch 2, dc in next dc, ch 2, V-st in center ch-2 sp, ch 2, dc in next dc, ch 2, 2 dc in 3rd ch of beginning ch-5. (8 dc, 5 ch-2 sps)
Row 6: Ch 1, sc in first dc, skip next dc, shell in next sp, [skip next dc, sc in next sp, skip next dc, shell in next sp] twice, skip next dc, sc in last dc. (19 sts: 15 dc + 4 sc; 3 shells)
Tier 3
Row 7: Sl st in first sc and next 3 dc. Ch 5 (counts as dc + ch 2), skip next 2 dc, dc in next sc, ch 2, skip next 2 dc, V-st in next dc (the center of shell 2), ch 2, skip next 2 dc, dc in next sc, ch 2, skip next 2 dc, dc in next dc (the center of shell 3). Leave the remaining 3 sts unworked. (6 dc, 5 ch-2 sps)
Row 8: Ch 3, dc in same st, [ch 2, dc in next dc] twice, ch 2, V-st in center ch-2 sp, [ch 2, dc in next dc] twice, ch 2, 2 dc in 3rd ch of beginning ch-5. (10 dc, 7 ch-2 sps)
Row 9 (RS): Ch 1, sc in first dc, skip next dc, shell in next sp, skip next dc, sc in next sp, skip next dc, shell in next sp, skip next dc. Work (sc, ch 8, sc) in the center sp; the ch-8 is the trunk loop. Then skip next dc, shell in next sp, skip next dc, sc in next sp, skip next dc, shell in next sp, skip next dc, sc in last dc. (26 sts: 20 dc + 6 sc; 4 shells, plus the ch-8 trunk loop)
Do not fasten off. Go straight on to the Border below. Every tree gets its border before any joining.
Make All Pieces
- Green: 30 trees, 5 tassels
- Cream: 24 trees, 4 tassels
Layout (rod at top; B = bead, G = green tree, C = cream tree, T = tassel):
Strand: 1 2 3 4 5 6 7 8 9
Rod ============================
B B B B B B B B B
Tree 1 G C G C G C G C G
B B B B B B B B B
Tree 2 G C G C G C G C G
B B B B B B B B B
Tree 3 G C G C G C G C G
B B B B B B B B B
Tree 4 G C G C G C G C G
B B B B B B B B B
Tree 5 G C G C G C G C G
B B B B B B B B B
Tree 6 G C G C G C G C G
B B B B B B B B B
T T T T T T T T T
Each strand uses 7 beads (63 in total).
Joining
The trees in a strand are joined loop to loop with beaded chain connectors. Work every connector in the same color as its strand.
Tree-to-tree connector (5 per strand): String one bead onto the yarn. Join with a sl st around the trunk loop of the upper tree. Ch 2, slide the bead up against the hook, and ch 1 to lock the bead in place. Ch 2, then sl st around the hanging loop of the next tree. Fasten off.
Each connector holds exactly one bead between 5 chains, which gives a 1 in (2.5 cm) gap between trees. Every connector uses the same chain count, so the strands stay level across the curtain.
Top tab: String one bead. Join with a sl st around the hanging loop of tree 1. Ch 2, slide the bead up, ch 1, ch 2, then ch 24 more. Sl st into the last ch made before the 24 to form the rod loop. Fasten off. This section measures 3 in (7.6 cm) from the top of the rod to the top of the tree.
Bottom tab: String one bead. Join around the trunk loop of tree 6. Ch 2, slide the bead up, ch 1, ch 2, then ch 6 and sl st in the first of those 6 ch to make a small tassel ring. Fasten off.
Tension: Work the chains at your normal tension. Tight chains make the trees tilt, and loose chains let the beads slip around.
Tassels: Wrap the yarn 40 times around the 4.5 in (11.4 cm) card. Thread a 10 in (25.4 cm) tie through the top of the wraps and tie it tightly through the tassel ring. Slide the wraps off the card, wrap the neck 0.5 in (1.3 cm) below the top, then cut the bottom loops and trim the tassel to 4 in (10.2 cm).
Strand checkpoint: 3 in top section + (6 trees × 4.75 in) + (5 connectors × 1 in) + 1 in bottom connector + 4 in tassel = 41.5 in. In cm: 7.6 + 72.4 + 12.7 + 2.5 + 10.2 = 105.4 cm.
Slide all 9 strands onto the rod in order G-C-G-C-G-C-G-C-G and space them 0.5 in (1.3 cm) apart. Width: (9 × 3.25 in) + (8 × 0.5 in) = 33.25 in (84.5 cm).
Border
Each tree has its own border. There is no border around the assembled curtain.
Border gauge: about 5 sl sts = 1 in (2.5 cm) along the edge, worked loosely.
Border round (RS): Continue from the end of Row 9 and work up the side.
Side A (21 sl sts):
– 1 sl st in the end of Row 9
– 2 sl sts in the end of Row 8
– 2 sl sts in the end of Row 7
– 1 sl st in each of the 3 free sts (sc + 2 dc) of Row 6
– 1 sl st in the end of Row 6
– 2 sl sts in the end of Row 5
– 2 sl sts in the end of Row 4
– 1 sl st in each of the 3 free sts of Row 3
– 1 sl st in the end of Row 3
– 2 sl sts in the end of Row 2
– 2 sl sts in the end of Row 1
Hanging loop: 16 sc around the ch-10 loop.
Side B: 21 sl sts, mirroring Side A in reverse order.
Bottom: 1 sl st in each of the 26 sts of Row 9. When you reach the ch-8 trunk loop, work 12 sc around it, then continue the sl sts. Join with a sl st to the first sl st and fasten off.
Total: (21 × 2) + 26 = 68 sl sts and 16 + 12 = 28 sc, for 96 stitches.
Why the math works: A dc row is about 0.4 in (1 cm) tall. At 5 sl sts per inch, that height needs 2 sl sts, so each dc row-end gets 2. A sc row-end is about half as tall and gets 1. Each free scallop stitch gets exactly 1, so the edge lies flat without ruffling or pulling in. The sc covering makes the loops thick and firm enough to carry the weight of the strand below.
Final Blocking
- Weave in all ends, working through the backs of the sl sts.
- Mist each tree until it is damp but not dripping.
- Pin each tree to 3.25 in (8.3 cm) wide × 3.5 in (8.9 cm) tall, pinning the tip and the trunk loop first.
- Pin out the outer scallop tip of each tier so the tiers step out evenly.
- Open each chain-space window with a pin.
- For crisper trees, apply a light spray starch if you like.
- Let the trees dry completely before assembling the strands.
- After assembly, hang the curtain for 24 hours so the connectors settle.
Final Quality-Control Checklist
- All 54 trees measure 3.25 × 3.5 in (8.3 × 8.9 cm).
- Row 9 on every tree has 4 shells, and the trunk loop is centered.
- Both loops on every tree are fully covered in sc.
- All 45 tree-to-tree connectors have 5 chains and 1 bead.
- All strands measure 41.5 in (105.4 cm).
- The colors alternate G-C-G-C-G-C-G-C-G.
- The tassels are all trimmed to the same 4 in (10.2 cm) length.
Troubleshooting
- The tiers don’t step out: You probably worked into the end stitches in Row 4 or Row 7. Leave the 3 outer stitches free on each side.
- The scallops ruffle: Use 5 dc per shell, not 6, or go down a hook size.
- The tree is lopsided: Check that each V-st sits in the true center space.
- A strand twists: Join every connector with the RS of both trees facing you.
- A bead won’t pass over the yarn: Use a big-eye needle, or choose beads with larger holes.
- The strands hang at different lengths: Recount the connector chains and re-block the trees.
Care
Hand wash in cool water, press out the water in a towel, and dry flat, re-pinning the trees to size. Remove the wooden beads before washing, or keep them out of long soaks.

Final Notes
Everything in this curtain follows one measurement chain. Keep to a gauge of 20 dc = 4 in (10.2 cm), and every tree will measure 3 in (7.6 cm) wide after Row 9 and 3.25 × 3.5 in (8.3 × 8.9 cm) after the border. Six trees and their beaded connectors make a 41.5 in (105.4 cm) strand. Nine strands spaced 0.5 in (1.3 cm) apart make a curtain 33.25 in (84.5 cm) wide. Check your first tree carefully, and the other 53 will follow.
Happy crocheting!