Tulip Rain is a light, airy strand curtain made of small crochet tulips. Each strand holds six flat tulip motifs linked by short chain connectors with wooden beads, and finishes with a full tassel. Nine strands hang side by side from a curtain rod, so light passes through, but the window still looks dressed.
The palette is coral and soft peach in a checkerboard. Tulips alternate color down each strand, and each strand starts with the opposite color to its neighbor. Natural wood beads give the warm colors a calm, Scandinavian-cottage feel.
This pattern uses US crochet terms. The finished curtain measures about 35.75 in (90.8 cm) wide and 58.5 in (148.6 cm) long, measured from the top of the rod to the tips of the tassels. Each tulip motif is 3.5 in (8.9 cm) wide and 6.25 in (15.9 cm) long.
Each motif is worked in one piece. You start at the bottom ring, crochet the stem and two leaves, then work the tulip head in rows from the top of the stem. A single crochet outline border with a hanging tab finishes the head. The motifs are then linked into strands with beaded chain connectors.
Finished Size and Construction
- Finished curtain: 35.75 in (90.8 cm) wide x 58.5 in (148.6 cm) long
- Skill level: Intermediate
- Terminology: US terms
- Yarn weight: DK (#3) cotton
- Hook: 4 mm (G-6)
- Number of pieces: 54 tulip motifs, 9 tassels, 9 strands
- Layout: 9 strands x 6 tulips, spaced 4 in (10.2 cm) apart on the rod
- Piece size: 3.5 in (8.9 cm) wide x 6.25 in (15.9 cm) long
- Head size before border: 3.25 in (8.3 cm) wide x 2.75 in (7.0 cm) tall
- Border depth: 0.125 in (0.3 cm) on every edge
Materials
Use a smooth mercerized cotton or cotton blend in DK weight, about 115 m per 50 g. Cotton keeps the petal points crisp and doesn’t stretch much under the weight of the strand.
- Coral: 160 g (about 368 m)
- Peach: 170 g (about 391 m)
- 63 natural wooden beads, 12 mm, with a hole of at least 4 mm (7 per strand)
- 4 mm (G-6) crochet hook
- Tapestry needle, plus a fine beading needle or dental floss threader for stringing beads
- Scissors, stitch markers, and a tape measure
- A 5 in (12.7 cm) piece of stiff card for the tassels
- Blocking mat and rust-proof pins
- A wooden curtain rod
Both quantities include a margin of about 10% for gauge swatching and tassel trimming.
Abbreviations (US Terms)
- ch: chain
- sl st: slip stitch
- sc: single crochet
- hdc: half double crochet
- dc: double crochet
- tr: treble crochet
- dtr: double treble crochet
- sp: space
- st(s): stitch(es)
Special stitch: Bead chain (Bch). Slide one pre-strung bead up against the hook, then ch 1 around it so the chain locks the bead in place.
Gauge and Checkpoints
Gauge: 18 dc and 10 rows = 4 in (10.2 cm); 20 sc = 4 in (10.2 cm).
Make one full motif and check it before you start the batch. Measure at these points:
- After Row 2 (fan): about 3 in (7.6 cm) across the curved top edge.
- After Row 4: 3.25 in (8.3 cm) wide and 1.75 in (4.4 cm) tall from the fan base.
- After Row 5: 2.75 in (7.0 cm) from the fan base to the center petal tip.
- After the border: 3.5 in (8.9 cm) wide x 3 in (7.6 cm) tall.
- Finished motif: 6.25 in (15.9 cm) from the top of the tab to the bottom of the stem ring.
If your motif is too big, go down half a hook size. If it is too small, go up half a size. A difference of 0.25 in (0.6 cm) per motif adds up to 1.5 in (3.8 cm) over one strand, so match the gauge before making all 54.

Tulip Motif
Stem and Leaves
Bottom ring: Ch 6, sl st in first ch to form a ring.
Lower stem: Ch 5.
First leaf: Ch 9.
– Side 1: Sc in 2nd ch from hook, hdc in next ch, dc in next ch, tr in next 2 ch, dc in next ch, hdc in next ch, sc in last ch (8 sts).
– Side 2: Rotate and work along the opposite side of the same 8 ch: sc, hdc, dc, tr, tr, dc, hdc, sc (8 sts).
– Tip: Ch 2, sl st in the skipped ch at the tip.
– Vein: Insert the hook through the center of the foundation ch between the two sides and work 8 sl sts back toward the stem. Sl st in the top ch of the lower stem.
The leaf has 16 sts and a ch-2 tip, with a sl st vein down the middle.
Second leaf: Fold the first leaf to the right. Repeat the first leaf so the second one lies on the left. Finish with a sl st in the same stem ch.
Upper stem: Ch 10.
Tulip Head
Row 1: Work 7 dc in 4th ch from hook. The 3 skipped ch count as the first dc. Turn. (8 sts)
Row 2: Ch 3 (counts as dc), dc in same st, 2 dc in each of next 6 sts, dc in top of turning ch. Turn. (15 dc)
Row 3 (mesh): Ch 4 (counts as dc + ch 1), skip next st, [dc in next st, ch 1, skip next st] 6 times, dc in top of turning ch. Turn. (8 dc + 7 ch-1 sps = 15 sts)
Row 4: Ch 3 (counts as dc), dc in each ch-1 sp and each dc across, ending with dc in 3rd ch of ch-4. Turn. (15 dc)
Row 5 (petals):
– First petal (sts 1-5): Ch 4 (counts as tr), ch 2, tr in first st, dc in next st, hdc in next st, sc in next st, sl st in next st.
– Center petal (sts 6-10): Sc in next st, tr in next st, (dtr, ch 2, dtr) in next st, tr in next st, sc in next st.
– Last petal (sts 11-15): Sl st in next st, sc in next st, hdc in next st, dc in next st, (tr, ch 2, tr) in top of turning ch.
Row 5 has 18 sts and 3 ch-2 tips. Do not turn.
Work the Outline Border (Section 10) right away on every motif. It finishes the head and adds the top tab.
Make All Pieces
Make 54 motifs:
- Coral: 27 motifs, 4 tassels
- Peach: 27 motifs, 5 tassels
Layout (P = peach, C = coral; strands numbered left to right, top row first):
Strand: 1 2 3 4 5 6 7 8 9
Row 1: P C P C P C P C P
Row 2: C P C P C P C P C
Row 3: P C P C P C P C P
Row 4: C P C P C P C P C
Row 5: P C P C P C P C P
Row 6: C P C P C P C P C
Every strand has 3 tulips of each color, so you need 27 + 27 = 54 motifs. The tassel matches the strand’s top tulip.
Joining the Strands
The motifs hang ring to tab with beaded chain connectors. Work each connector in the color of the motif above it.
Connector:
1. String 1 bead onto the working yarn.
2. Join with a sl st in the bottom ring of the upper motif.
3. Ch 4, Bch, ch 4.
4. Sl st through the tab ring of the next motif. Fasten off and weave in the ends.
That is 9 ch plus 1 bead, about 2 in (5.1 cm). Five connectors join the 6 tulips of each strand.
Bottom finish:
1. String 2 beads onto the yarn.
2. Join in the bottom ring of tulip 6.
3. Ch 4, Bch, ch 3, Bch, ch 4. Fasten off, leaving a 6 in (15.2 cm) tail. This section measures about 3 in (7.6 cm).
Tassels:
1. Wrap yarn 40 times around the 5 in (12.7 cm) card.
2. Tie the wraps at the top using the bottom-finish tail, then cut the lower loops.
3. Wrap the neck 0.5 in (1.3 cm) below the top and trim to 5 in (12.7 cm).
Hanging loop: Join with a sl st in the tab ring of tulip 1, ch 30, then sl st back into the same ring. Folded over the rod, the loop drops about 3 in (7.6 cm).
Tension: Keep the connector chains the same size as your stem chains. Tight connectors pucker the rings, and loose ones droop.
Strand checkpoint:
– Hanging loop: 3 in
– 6 tulips: 37.5 in
– 5 connectors: 10 in
– Bottom finish: 3 in
– Tassel: 5 in
Total: 58.5 in (148.6 cm). Hang each strand and check it before moving on. A difference of up to 1 in (2.5 cm) between strands is fine.
Hanging: Space the strands 4 in (10.2 cm) apart, center to center. The 8 gaps span 32 in (81.3 cm). Add one leaf span of 3.75 in (9.5 cm) to get the full width of 35.75 in (90.8 cm).
Outline Border
Border gauge: 5 sc per inch (2.5 cm).
Border round: Continue from Row 5 without turning. Ch 1.
- Right side: 2 sc in each row end down the side, Rows 5 to 1. (10 sc)
- Base: 1 sc in the fan’s base ch, beside the stem. (1 sc)
- Left side: 2 sc in each row end up the side, Rows 1 to 5. (10 sc)
- Top edge:
- 3 sc in the ch-2 tip
- sc in each of the next 5 sts (tr, dc, hdc, sc, sl st)
- sc in each of the next 3 sts (sc, tr, dtr)
- Center tip: sc in the ch-2 sp, then make the tab: ch 10, sl st in 6th ch from hook, sl st in each of the next 4 ch. Work 2 sc in the same ch-2 sp.
- sc in each of the next 3 sts (dtr, tr, sc)
- sc in each of the next 5 sts (sl st, sc, hdc, dc, tr)
- 3 sc in the last ch-2 tip
- Total for the top edge: 3 + 5 + 3 + 3 + 3 + 5 + 3 = 25 sc
Sl st to the first sc. Fasten off.
Total: 10 + 1 + 10 + 25 = 46 sc. The tab is not counted.
Why the math works:
– The top edge has 1 sc for each of the 16 Row 5 sts between the tips, plus 3 sc in each of the 3 tips: 16 + 9 = 25. The two outer tr row ends are covered by the side counts.
– Each dc row is about 0.4 in (1.0 cm) tall, so 2 sc per row end gives 5 sc per inch. That matches the border gauge, so the sides lie flat.
– 3 sc at each tip turns the point cleanly.
– A single sc at the base keeps the cup narrow where it meets the stem.
Final Blocking
- Wet each motif in cool water and press out the water in a towel.
- Pin the head to 3.5 in (8.9 cm) wide x 3 in (7.6 cm) tall.
- Pin each petal tip to a sharp point. The center tip should sit highest, and the side tips should flare outward.
- Pin each leaf to 1.75 in (4.4 cm) long, so the full leaf span is 3.75 in (9.5 cm).
- Pin the stem straight, then pin the tab and ring as round circles.
- Let everything dry completely.
- Steam the tassels lightly and trim them level.
Final Quality-Control Checklist
- Every head has 46 border sc and a centered tab.
- All 54 motifs measure 6.25 in (15.9 cm) within 0.25 in (0.6 cm).
- Each leaf has a visible center vein and a pointed tip.
- The colors follow the checkerboard grid.
- Each strand has 7 beads and is 58.5 in (148.6 cm) long.
- All ends are woven in at least 1 in (2.5 cm).
Troubleshooting
- Head cups or ruffles: Recount Row 2 (15 dc). Too many increases make the cup ruffle.
- Mesh holes uneven: Make sure every ch-1 skips exactly 1 st.
- Petal points rounded: Re-pin the tips while the motif is damp, and keep the 3 sc in each tip.
- Leaves curl: Work the vein sl sts loosely, then block flat.
- Strand stretches when hung: Cotton can relax under weight. Hang the strands for 24 hours, then shorten the hanging loop chain if needed.
- Beads slide on the chain: Make sure the ch 1 in each Bch wraps tightly around the bead.
Care
Hand wash in cool water with mild soap. Lay flat to dry and reshape the petal points. Remove the curtain from the rod first and do not soak the wooden beads for long.

Final Notes
The measurement chain is simple:
– Gauge of 18 dc = 4 in (10.2 cm)
– Head of 3.25 in (8.3 cm) before the border, 3.5 in (8.9 cm) after it
– Motif of 6.25 in (15.9 cm)
– Connectors of 2 in (5.1 cm)
– Strands of 58.5 in (148.6 cm)
– Nine strands spaced 4 in (10.2 cm) apart, for a curtain 35.75 in (90.8 cm) wide
Check each link in that chain and the curtain will hang evenly.
Happy crocheting!