The Lagoon Lattice curtain is a light, airy window hanging made from open diamond motifs. Each diamond has a clear diamond-shaped window in the center, a solid band of double crochet around it, and a crisp single crochet edge. Short corded connectors link the diamonds point to point into long vertical strands, and the strands hang side by side from a curtain rod.
The strands alternate deep teal and soft cream, with five teal and four cream, so from across the room the curtain reads as stripes of color. Up close, you can see lines of double crochet posts running around each diamond. The style is modern boho: graphic, simple, and easy to push aside with one hand.
This pattern uses US crochet terms. Each finished diamond measures 3.75 in (9.5 cm) per side and 5.25 in (13.3 cm) from point to point. A strand of 8 diamonds is 56 in (142.2 cm) long from the top point of the first diamond to the bottom point of the last. Each strand also has a 1.5 in (3.8 cm) stem and a hanging loop. Nine strands spaced 5.5 in (14.0 cm) apart need about 50 in (127.0 cm) of rod.
Construction is simple. You work each diamond in the round as a square frame, then turn it on its point. The last round is the border, and you also join there: each new diamond links to the one above it while you work its border. The first diamond of every strand gets a hanging loop instead of a connector.
Finished Size and Construction
- Finished curtain size: about 50 in (127.0 cm) wide on the rod x 56 in (142.2 cm) long, plus stem and loop
- Skill level: Easy / advanced beginner
- Terminology: US crochet terms
- Yarn weight: Worsted weight (#4), cotton or cotton blend
- Hook: 5.0 mm (H-8)
- Number of pieces: 72 diamond motifs, joined into 9 separate strands
- Layout: 9 strands x 8 diamonds each, with each strand hanging on its own
- Piece size: 3.75 in (9.5 cm) per side, 5.25 in (13.3 cm) point to point
- Size before border: 3.5 in (8.9 cm) per side
- Border depth: 1/8 in (0.3 cm) per side, 1 round of single crochet
Materials
Choose a smooth worsted cotton or cotton blend. Cotton hangs straight, keeps the diamond points sharp, and doesn’t stretch much under its own weight. Avoid fuzzy or very stretchy acrylics, which can make long strands grow over time.
- Teal: 300 g, about 510 m (40 diamonds, 5 strands)
- Cream: 250 g, about 425 m (32 diamonds, 4 strands)
These quantities include a margin of about 15 percent for your gauge swatch, tails, and differences between brands.
Tools:
- 5.0 mm (H-8) crochet hook
- Tapestry needle
- Scissors
- Stitch markers
- Rust-proof pins and a blocking mat
- Tape measure
- Curtain rod, at least 50 in (127.0 cm) long and no more than 1 in (2.5 cm) thick
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- sp – space
- st(s) – stitch(es)
- rnd – round
Special stitch – Corded connector: Ch 8, sl st in the indicated sp, then sl st in the back bump of each of the 8 ch, working back toward where the chain started. This makes a firm cord that looks braided and doesn’t stretch.
Gauge and Checkpoints
Gauge: 14 dc and 16 ch = 4 in (10.2 cm) with a 5.0 mm hook.
Make one complete diamond before you start the curtain. Measure it flat, without stretching, at each checkpoint:
- After Rnd 1: about 2.25 in (5.7 cm) per side
- After Rnd 2: 3.5 in (8.9 cm) per side; center opening 1.25 in (3.2 cm) per side
- After the border: 3.75 in (9.5 cm) per side; 5.25 in (13.3 cm) point to point
- Connector: 8 ch = 2 in (5.1 cm)
If your diamond is too big, go down one hook size. If it is too small, go up one hook size. Don’t change the stitch counts, because the corners and joins depend on them. Being off by only 0.25 in (0.6 cm) per diamond adds up to 2 in (5.1 cm) over a strand of 8.

Diamond Motif
You work the diamond as a square frame. The four corners grow outward while the foundation ring keeps the center open. Don’t turn between rounds.
Foundation: Ch 20, then sl st in the first ch to form a ring. Take care not to twist the chain. This ring is the center opening, with 5 ch per side.
Rnd 1: Ch 3 (counts as dc), dc in same ch as the join, ch 2, 2 dc in same ch (first corner made). Dc in each of next 4 ch, (2 dc, ch 2, 2 dc) in next ch (corner made). Repeat from * to * 2 more times. Dc in each of last 4 ch, sl st to top of beginning ch-3.
Stitch count: 32 dc and 4 ch-2 corner sps. That is 16 dc worked one into each non-corner ch, plus 16 dc in the 4 corners (4 per corner). Each side has 8 dc between corner sps (2 + 4 + 2).
Rnd 2: Sl st in next dc, sl st in ch-2 sp. Ch 3 (counts as dc), (dc, ch 2, 2 dc) in same sp. Dc in each of next 8 dc, (2 dc, ch 2, 2 dc) in next ch-2 sp. Repeat from * to * 2 more times. Dc in each of last 8 sts, including the dc you slipped across, and sl st to top of beginning ch-3.
Stitch count: 48 dc and 4 ch-2 corner sps. Each side has 12 dc between corner sps (2 + 8 + 2). The piece now measures 3.5 in (8.9 cm) per side.
Don’t fasten off. The border is Rnd 3; you’ll find it in the Border section below, together with the join. The first corner sp you work into in Rnd 2 is the top corner. The corner opposite it is the bottom corner.
Make All Pieces
Work Rnds 1 and 2 for every diamond. Then work the border round on each diamond as you add it to its strand.
- Teal: 40 diamonds (5 strands x 8)
- Cream: 32 diamonds (4 strands x 8)
- Total: 72 diamonds
Layout grid (T = teal, C = cream; columns are strands, rows are diamonds from the top down):
Strand: 1 2 3 4 5 6 7 8 9
Row 1: T C T C T C T C T
Row 2: T C T C T C T C T
Row 3: T C T C T C T C T
Row 4: T C T C T C T C T
Row 5: T C T C T C T C T
Row 6: T C T C T C T C T
Row 7: T C T C T C T C T
Row 8: T C T C T C T C T
Each strand is a single color. The strands aren’t joined to each other; they only share the rod.
Joining
You join the diamonds as you go, point to point, during the border round. The join always happens at a corner, never along a side, so the stitch counts along the sides don’t change.
Logic: One corded connector links the top corner of each new diamond to the bottom corner ch-2 sp of the diamond above it. You still work 1 sc before and 1 sc after the connector in the top corner, so that corner holds 2 sc like every other corner. The connector simply takes the place of the ch-2 point.
Order of work for one strand:
- Diamond 1: work the border with a hanging loop at the top corner.
- Diamonds 2 to 8: work the border with a connector at the top corner, joining it to the bottom corner sp of the diamond you just finished.
Tension: Chain the connectors at the same tension as your gauge chain. If they’re too tight, the strand pulls the points into long, narrow shapes. If they’re too loose, the diamonds twist and droop. Slip stitch back along the chain gently so the cord stays straight and doesn’t curl.
Size checkpoint: After joining 2 diamonds, measure from the top point of Diamond 1 to the bottom point of Diamond 2. It should be 5.25 + 2 + 5.25 = 12.5 in (31.8 cm). If it’s off, fix it now, before you join the rest of the strand.
Border
Border gauge: 1 sc per dc. The border adds 1/8 in (0.3 cm) to each edge, which takes each side from 3.5 in (8.9 cm) to 3.75 in (9.5 cm).
Rnd 3 (border), Diamond 1 of each strand: Sl st in next dc, sl st in ch-2 sp (top corner). Ch 1, sc in sp, ch 22, sl st in 17th ch from hook (16-ch hanging loop made), sl st in back bump of each of the remaining 5 ch, sc in same top corner sp. Sc in each of next 12 dc, (sc, ch 2, sc) in next ch-2 sp. Repeat from * to * 2 more times. Sc in each of last 12 dc, sl st to first sc. Fasten off and weave in ends.
Rnd 3 (border), Diamonds 2 to 8: Sl st in next dc, sl st in ch-2 sp (top corner). Ch 1, sc in sp, work a corded connector into the bottom corner ch-2 sp of the previous diamond, sc in same top corner sp. Sc in each of next 12 dc, (sc, ch 2, sc) in next ch-2 sp. Repeat from * to * 2 more times. Sc in each of last 12 dc, sl st to first sc. Fasten off and weave in ends.
Stitch count: 56 sc. That is 48 sc worked one into each dc, plus 8 sc added in the corners (2 per corner).
Per side: 14 sc = 1 corner sc + 12 sc + 1 corner sc. Each corner sp holds 2 sc, one for each side it touches, so no corner stitch is counted twice: 4 sides x 14 = 56.
Why the math works: Rnd 2 has 12 dc per side, and the border puts exactly 1 sc on each one, so the sides lie flat without ruffling or cupping. The 2 extra sc at each corner turn the corner. The bottom corner keeps its ch-2 point, which gives the next diamond a sturdy sp to join into. At the top corner, a connector or hanging loop takes the place of the ch-2. That changes the shape of the point but not the sc count. The 16-ch hanging loop is 4 in (10.2 cm) around, which is enough to slip over a 1 in (2.5 cm) rod.
Final Blocking
- Weave in every tail securely before blocking. Weave along the dc posts, not across the center opening.
- Soak each strand in cool water for 10 minutes, then gently squeeze out the water. Don’t wring it.
- Roll the strand in a towel and press to remove excess water.
- Lay the strand flat on a blocking mat with the diamonds standing on their points.
- Pin each diamond to 3.75 in (9.5 cm) per side and 5.25 in (13.3 cm) from point to point. Pin all four points, then pin the center opening square to 1.25 in (3.2 cm) per side.
- Straighten each connector to 2 in (5.1 cm) and check that it runs straight from point to point.
- Let the strand dry completely, then unpin and hang it. Gravity will finish the job over the first day.
Final Quality-Control Checklist
- Every diamond has 12 dc per side in Rnd 2 and 14 sc per side in the border.
- All 4 points are sharp, and the center opening is a clean diamond.
- Each strand has 8 diamonds and 7 connectors.
- Each connector is 2 in (5.1 cm) and doesn’t stretch.
- Every strand measures 56 in (142.2 cm) from top point to bottom point.
- All hanging loops are the same size and slide easily onto the rod.
- The colors alternate teal and cream across the rod, with teal at both ends.
- All ends are woven in, and none show on the front.
Troubleshooting
Diamond cups or curls: Your corners are too tight. Make the ch-2 corners a little looser, or go up one hook size.
Sides ripple: You’ve added extra stitches along a side. Recount: 8 dc per side in Rnd 1, 12 dc in Rnd 2, and 14 sc in the border.
Center opening closes up: The foundation chain is too tight. Chain with a hook one size larger, then switch back for Rnd 1.
Strands are different lengths: Your connector tension varies. Measure each connector against 2 in (5.1 cm) and remake any that are short or long.
Diamonds twist when hanging: A connector went into the wrong sp. Check that each connector links the top corner to the bottom corner of the diamond above, not to a side corner.
Loop is too small for your rod: Add ch to the loop in multiples of 4. Every 4 extra ch adds about 1 in (2.5 cm) around.
Care
Hand wash in cool water with mild soap, roll in a towel, and dry flat. Re-pin the diamonds if they lose their shape.

Final Notes
The measurement chain is simple. The foundation opening has 5 ch per side. That grows to 8 dc per side in Rnd 1 and 12 dc per side in Rnd 2, for 3.5 in (8.9 cm). The border adds 2 sc per side, giving 14 sc and 3.75 in (9.5 cm) per side, or 5.25 in (13.3 cm) from point to point. Eight diamonds and seven 2 in (5.1 cm) connectors make one 56 in (142.2 cm) strand. Nine strands on 50 in (127.0 cm) of rod complete the curtain.
Check your gauge on the first diamond and measure after your first join. After that, the rest is calm, repeatable work.
Happy crocheting!