Lotus Bloom Hanging Toilet Paper Holder Crochet Pattern

The Lotus Bloom holder is a vertical sage-green strap with two cup baskets that each hold one toilet paper roll. Each cup is wrapped in layered cream fan petals with two green leaves at the front, so it looks like a water lily opening up the wall.

The palette is simple: sage green for the strap, cups and leaves, cream for the petals, and a natural wooden ring at the top. It’s a calm, spa-style piece that works in a neutral bathroom.

This pattern uses US crochet terms. The finished strap measures 4.5 in × 18.5 in (11.4 × 47.0 cm) flat. With the tab folded over the ring, the holder hangs about 19.5 in (49.5 cm) from the top of the ring to the bottom of the strap.

You’ll make one flat strap in rows, two cups worked in joined rounds, 18 fan petals and 4 leaves. Then you sew the petals and leaves onto the cups, sew the cups to the strap, work a single crochet border and fold the tab around the ring.

Finished Size and Construction

  • Finished size: 4.5 × 18.5 in (11.4 × 47.0 cm) strap; about 19.5 in (49.5 cm) total hanging length
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: Worsted (#4) cotton
  • Hook: 5.0 mm (H-8)
  • Number of pieces: 25 (1 strap, 2 cups, 18 petals, 4 leaves) plus 1 wooden ring
  • Layout: 2 cups stacked vertically, centered on the strap
  • Piece sizes: cup 5 in (12.7 cm) across × 3.75 in (9.5 cm) tall; petal 3.5 × 1.75 in (8.9 × 4.4 cm); leaf 2.25 × 1 in (5.7 × 2.5 cm)
  • Strap size before border: 4 × 18 in (10.2 × 45.7 cm)
  • Border depth: 0.25 in (0.6 cm), 1 round

Materials

Use a smooth, sturdy worsted cotton or cotton blend. Cotton holds the cup shape, doesn’t stretch much under the weight of a roll, and copes with bathroom humidity. Avoid fuzzy acrylic, because the petal spokes won’t show clearly.

  • Sage green: 220 g / 374 m (strap, cups, leaves, border)
  • Cream: 120 g / 204 m (petals)

These amounts are for a yarn of about 170 m per 100 g. Quantities include a margin of roughly 15%.

Tools:
– 5.0 mm (H-8) crochet hook
– Wooden ring, 2.5 in (6.4 cm) outer diameter
– Tapestry needle
– 4 locking stitch markers
– Scissors and tape measure
– Blocking mat and pins, steamer or spray bottle

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together
  • BLO – back loop only
  • MR – magic ring
  • st(s) – stitch(es)
  • rev sc – reverse single crochet

Reverse single crochet (crab stitch): Working from left to right (right-handers), insert the hook into the next stitch to the right, yarn over, pull up a loop, yarn over, and pull through both loops. It makes the rolled, corded rim on each cup.

Gauge and Checkpoints

Gauge: 14 sc and 16 rows/rounds = 4 in (10.2 cm). Each sc row or round is 0.25 in (0.6 cm) tall.

Test one cup base and one petal before you start the strap.

Checkpoints:
– Cup base after Round 9 (54 sts): about 4.75 in (12.1 cm) across, lying flat.
– Cup wall: 15.4 in (39.1 cm) around and 5 in (12.7 cm) across.
– Cup height after Round 24: 3.75 in (9.5 cm) measured up the wall.
– Petal after Row 4: 3.5 in (8.9 cm) wide × 1.75 in (4.4 cm) tall.
– Strap after Row 4: 14 sts = 4 in (10.2 cm) wide.
– Strap after Row 72: 18 in (45.7 cm) long.

If your piece is too big, go down a hook size (4.5 mm). If it’s too small, go up to 5.5 mm. Check that a toilet paper roll fits inside the cup with a little room to spare. Most standard rolls are about 4.5 in (11.4 cm) wide.

Sage-green crocheted fabric with cream ruffle detail and wooden ring on marble background.

Strap

Use sage green. The strap is worked in rows from the bottom up. Ch 1 at the start of each row doesn’t count as a stitch.

Row 1: Ch 9, sc in 2nd ch from hook and in each ch across, turn. (8 sc)
Row 2: Ch 1, 2 sc in first st, sc in next 6 sts, 2 sc in last st, turn. (10 sc)
Row 3: Ch 1, 2 sc in first st, sc in next 8 sts, 2 sc in last st, turn. (12 sc)
Row 4: Ch 1, 2 sc in first st, sc in next 10 sts, 2 sc in last st, turn. (14 sc)

Rows 1–4 make the rounded bottom.

Rows 5–56: Ch 1, sc in each st across, turn. (14 sc)

Checkpoint: 14 in (35.6 cm) long, 4 in (10.2 cm) wide.

Taper:
Row 57: Ch 1, sc2tog, sc in next 10 sts, sc2tog, turn. (12 sc)
Row 58: Ch 1, sc across, turn. (12 sc)
Row 59: Ch 1, sc2tog, sc in next 8 sts, sc2tog, turn. (10 sc)
Row 60: Ch 1, sc across, turn. (10 sc)
Row 61: Ch 1, sc2tog, sc in next 6 sts, sc2tog, turn. (8 sc)
Row 62: Ch 1, sc across, turn. (8 sc)
Row 63: Ch 1, sc2tog, sc in next 4 sts, sc2tog, turn. (6 sc)
Row 64: Ch 1, sc across, turn. (6 sc)

Tab:
Rows 65–72: Ch 1, sc across, turn. (6 sc)

The tab is 2 in (5.1 cm) long. Don’t fasten off. Keep the loop on a stitch marker for the border.

Cup (Make 2)

Use sage green. The cups are worked in joined rounds so the stitch columns stay vertical, which keeps the petal placement accurate. Join each round with a sl st to the first sc. Ch 1 doesn’t count as a stitch.

Round 1: MR, ch 1, 6 sc in ring, join. (6 sc)
Round 2: Ch 1, 2 sc in each st, join. (12 sc)
Round 3: Ch 1, (sc, 2 sc in next) × 6, join. (18 sc)
Round 4: Ch 1, (sc in next 2, 2 sc in next) × 6, join. (24 sc)
Round 5: Ch 1, (sc in next 3, 2 sc in next) × 6, join. (30 sc)
Round 6: Ch 1, (sc in next 4, 2 sc in next) × 6, join. (36 sc)
Round 7: Ch 1, (sc in next 5, 2 sc in next) × 6, join. (42 sc)
Round 8: Ch 1, (sc in next 6, 2 sc in next) × 6, join. (48 sc)
Round 9: Ch 1, (sc in next 7, 2 sc in next) × 6, join. (54 sc)

Checkpoint: the base is flat and 4.75 in (12.1 cm) across.

Round 10: Ch 1, sc in BLO of each st, join. (54 sc) This makes a crisp ridge where the base turns into the wall.
Rounds 11–23: Ch 1, sc in each st, join. (54 sc)

Checkpoint: the wall (Rounds 10–23) is 3.5 in (8.9 cm) tall.

Round 24 (rim): Ch 1, rev sc in each st, join. (54 rev sc) Fasten off and weave in the ends.

Mark the cup: Put marker A on any stitch of Round 24 for the center front. Count 27 sts on and put marker B on that stitch for the center back.

Petal (Make 18)

Use cream. Each petal is a half-circle fan worked in rows from a magic ring. The ring and the row ends form the straight bottom edge.

Row 1: MR, ch 3 (counts as dc), 6 dc in ring, turn. (7 dc) Pull the ring closed but leave a small round hole showing.
Row 2: Ch 3 (counts as dc), dc in first st, 2 dc in each remaining st, including the top of the turning ch, turn. (14 dc)
Row 3: Ch 3 (counts as dc), dc in first st, dc in next st, 2 dc in next st, dc in next st; repeat from * to end, turn. (21 dc)
Row 4 (edging): Ch 1, sc in next 2 sts, 2 sc in next st; repeat from * 7 times. (28 sc)

Fasten off and leave a 12 in (30.5 cm) tail for sewing.

Checkpoint: 3.5 in (8.9 cm) across the straight edge and 1.75 in (4.4 cm) tall.

Leaf (Make 4)

Use sage green.

Foundation: Ch 9.
Round 1: Working into the chains, sc in 2nd ch from hook, hdc in next ch, dc in next 3 chs, hdc in next ch, sc in next ch (7 sts). Then 3 sc in the last ch to turn the tip (3 sts). Working along the other side of the chain, sc in next ch, hdc in next ch, dc in next 3 chs, hdc in next ch, sc in last ch (7 sts). Join with a sl st to the first sc. (17 sts)

Fasten off and leave a 10 in (25.4 cm) tail. The tail end is the base, and the 3-sc end is the tip.

Optional vein: sl st on the surface from the base to the tip in sage green.

Checkpoint: 2.25 in (5.7 cm) long, 1 in (2.5 cm) wide.

Make All Pieces

Piece Color Quantity
Strap Sage green 1
Cup Sage green 2
Leaf Sage green 4
Petal Cream 18 (9 per cup)

Layout (front view, strap rows counted from the bottom):

          ( WOODEN RING )
        [ tab, rows 65–72 ]
       [ taper, rows 57–64 ]
      |  plain, rows 47–56   |
      |  UPPER CUP rows 31–46|
      |  gap, rows 23–30     |
      |  LOWER CUP rows 7–22 |
      |  bottom, rows 1–6    |
       \__________________/

Joining

Use whipstitch and the matching yarn tail for every seam. Keep the tension firm, but don’t pull so tight that the cup wall puckers.

Stage 1: Petals to cups (per cup). Sew each petal by its straight edge only, along one round, centered on the stitch given. Each petal’s straight edge spans 12 cup stitches (6 on each side of center), with one whipstitch per cup stitch. Leave the curved edges free.

  • Outer row (5 petals), along Round 14: center them on A, A+9, A−9, A+18 and A−18. Their tops reach about Round 21.
  • Inner row (4 petals), along Round 19: center them on A+5, A−5, A+14 and A−14. Their tops reach about Round 26, which is 0.5 in (1.3 cm) above the rim.

The inner petals sit between the outer ones, so their tops show through the gaps. The back third of the cup around B stays bare green, which leaves a flat area to sew to the strap.

Stage 2: Leaves (per cup). Put both leaf bases together at stitch A on Round 11. Angle one leaf up and to the left and the other up and to the right, at about 45°, over the lower edge of the center petal. Sew around the bottom half of each leaf so the tips stay free.

Stage 3: Cups to strap. The strap’s center line runs between stitches 7 and 8 of its 14. Line up cup stitches B−1, B and B+1 over strap stitches 6–9. Sew one cup round to one strap row, because both pieces have 16 rows/rounds per 4 in (10.2 cm):

  • Lower cup: Round 9 to Row 7, through Round 24 to Row 22 (16 rounds to 16 rows).
  • Upper cup: Round 9 to Row 31, through Round 24 to Row 46.

Work two vertical seams, one along column B−1 and one along column B+1.

Size checkpoint: the gap between cups is 2 in (5.1 cm), the bottom margin is 1.5 in (3.8 cm), and the strap above the upper cup is 6.5 in (16.5 cm).

Border

Border gauge: 14 sc and 16 rows = 4 in (10.2 cm), so 7 sc per 8 row ends.

Pick up the live loop at the end of Row 72 and continue in sage green. The edge counts below include their corner stitches, and each corner stitch is counted only once.

Round 1:
– Top of tab (across Row 72): 2 sc in first st, sc in next 4 sts, 2 sc in last st. (8 sc)
– Left side: sc down 72 row ends, skipping every 8th row end. (63 sc)
– Bottom (across the foundation chain of Row 1): 2 sc in first ch, sc in next 6 chs, 2 sc in last ch. (10 sc)
– Right side: sc up 72 row ends, skipping every 8th row end. (63 sc)

Join with a sl st to the first sc. (8 + 63 + 10 + 63 = 144 sc) Fasten off.

Why the math works: with 14 sts and 16 rows per 4 in (10.2 cm), each row is 7/8 as tall as a stitch is wide. Working 7 sc into every 8 row ends gives 72 × 7/8 = 63 sc, so the sides lie flat without stretching or rippling. The 2-sc groups at the ends of the top and bottom ease the corners round. The border adds 0.25 in (0.6 cm) all around, so the strap goes from 4 × 18 in (10.2 × 45.7 cm) to 4.5 × 18.5 in (11.4 × 47.0 cm).

Attach the ring: Fold the tab back over the wooden ring at Row 68. Whipstitch the top edge of the tab to the back of the strap at Row 64. The visible strap below the ring is 17.5 in (44.5 cm).

Final Blocking

  1. Spray or steam the petals lightly. Don’t press them flat.
  2. Shape each petal with your fingers so it curves outward a little from the cup.
  3. Put a toilet paper roll or a 4.5 in (11.4 cm) jar inside each cup so the walls dry round.
  4. Lay the strap flat face up and pin it to 4.5 in (11.4 cm) wide.
  5. Steam the strap edges so the border lies flat.
  6. Let everything dry completely, about 12 hours, before hanging.

Final Quality-Control Checklist

  • Strap is 4.5 × 18.5 in (11.4 × 47.0 cm), with straight sides and a round bottom
  • Each cup has 54 sts, a clear ridge at Round 10 and an even rev sc rim
  • 9 petals per cup: 5 outer and 4 inner, evenly spaced and staggered
  • Inner petals rise 0.5 in (1.3 cm) above the rim
  • Leaf bases meet at center front
  • Cups are centered on the strap, with a 2 in (5.1 cm) gap between them
  • Tab is sewn securely behind the ring
  • All ends woven in

Troubleshooting

  • Cup base cups up or ruffles: check the increase spacing, or change hook size for Rounds 1–9 only.
  • Cup leans forward: extend the back seams down into the Round 9 base edge for more support.
  • Petal hole too big: pull the magic ring tail tighter and secure it on the back.
  • Petals flop: sew the straight edge with more stitches, or anchor each petal’s center point to the cup with one hidden stitch.
  • Border ripples: you have too many stitches, so skip a row end more often. Border pulls in: you have too few, so skip less often.
  • Roll won’t fit: go up a hook size, or add one 6-st increase round (60 sts).

Care

Hand wash cold and dry flat, reshaping the cups over a roll while damp. Don’t tumble dry or iron the petals.

Sage-green crocheted toilet paper holder with cream floral blooms hung from brass hardware on white wall.

Final Notes

The measurements build on each other. A 14-st, 16-row gauge gives a 54-st cup that’s 5 in (12.7 cm) across and a 4 × 18 in (10.2 × 45.7 cm) strap. The 16-round cups match 16 strap rows, so the seams line up exactly. The 144-st border brings the strap to 4.5 × 18.5 in (11.4 × 47.0 cm), and folding the tab gives a total hanging length of 19.5 in (49.5 cm). If you check the gauge early, the rest of the pieces will fit together.

Happy crocheting!

Leave a Comment