This little letter S is a lacy, striped keychain that looks great clipped to a tote bag or a set of keys. The body is made of fan-shaped shells in raspberry pink and warm cream, and the colors swap every row. Three tiny cream flowers with sunny yellow centers and soft green leaves sit on the corners and the middle curve.
The style is cottage-garden sweet. The shells look lacy, but the piece is firm enough to hang. A single round of raspberry single crochet outlines the letter so the shape reads clearly.
This pattern uses US crochet terms. The finished letter measures 2.75 in (7.0 cm) wide and 3.75 in (9.5 cm) tall. With the gold ring and chain added, the full keychain is about 5.5 in (14.0 cm) long.
The S is one flat piece worked in 7 rows from the bottom up. Rows 3 and 5 are short rows, and Rows 4 and 6 bridge across on chains. This leaves the two open slots that make the S curve. A border round neatens every edge, and then you sew on the flowers and attach the hardware.
Finished Size and Construction
- Finished size: 2.75 in (7.0 cm) wide x 3.75 in (9.5 cm) tall, letter only
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: Sport weight (#2) cotton
- Hook: 3.0 mm (US C/2 or D/3)
- Number of pieces: 1 letter body, plus 3 flower appliqués and 6 leaf appliqués
- Layout: Single letter S, worked flat in 7 striped rows
- Piece size before border: 2.5 in (6.4 cm) wide x 3.5 in (8.9 cm) tall
- Border depth: about 0.125 in (0.3 cm) on every edge
- Flower size: about 0.9 in (2.3 cm) across
Materials
Use a smooth mercerized or combed cotton in sport weight. Cotton shows off the shell texture and holds its shape on a keychain that gets handled a lot. Avoid fuzzy or very stretchy yarns, because they will blur the slots in the S.
- Raspberry pink: 5 g, about 16 m (Rows 1, 3, 5, 7 and border)
- Cream: 4 g, about 12 m (Rows 2, 4, 6 and flower petals)
- Sunny yellow: 1 g, about 3 m (flower centers)
- Sage green: 1 g, about 3 m (leaves)
Quantities include a margin for joins, tails and a test row.
Tools:
- 3.0 mm crochet hook
- Tapestry needle
- Scissors
- Gold split key ring, 1 in (2.5 cm) across
- Short gold chain, about 0.75 in (1.9 cm), with 2 jump rings
- Flat-nose pliers
- Rustproof pins
- Spray bottle and a blocking mat or folded towel
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- hdc – half double crochet
- dc – double crochet
- sk – skip
- st(s) – stitch(es)
- MR – magic ring
- RS – right side
Shell: 5 dc worked in the same stitch. The 3rd dc is the center dc.
Half shell: 3 dc in the same stitch. At the start of a row, ch 3 counts as the first dc, so you work ch 3 and then 2 dc.
Gauge and Checkpoints
Gauge in shell pattern: 6 sts (one shell and one sc) = 0.8 in (2.0 cm), and 2 rows = 1 in (2.5 cm).
Make Row 1 first and measure it before you go on. That row sets the width of the whole letter.
Checkpoints:
- After Row 1: 2.5 in (6.4 cm) wide
- After Row 2: 1 in (2.5 cm) tall
- After Row 4: 2 in (5.1 cm) tall
- After Row 7: 2.5 in (6.4 cm) wide x 3.5 in (8.9 cm) tall
- Each slot before the border: about 0.8 in (2.0 cm) wide and 0.5 in (1.3 cm) tall
- After the border: 2.75 in (7.0 cm) x 3.75 in (9.5 cm)
If Row 1 is too wide, go down to a 2.75 mm hook. If it is too narrow, go up to a 3.25 mm hook. If only the height is off, make sure your dc are fully pulled up and not squashed.

Pattern Notes
- Work every row with the RS facing, from right to left. Left-handers work left to right. Do not turn.
- Fasten off at the end of each row and join the next color at the right-hand edge. Leave 4 in (10.2 cm) tails, and weave them in as you go or crochet over them in the border.
- Columns are numbered col 1 to col 19 from the right edge. They show where each short row starts and stops.
Letter S Body
Foundation (raspberry): Ch 20.
Row 1 (raspberry): Sc in 2nd ch from hook (col 1), sk 2 ch, shell in next ch, sk 2 ch, sc in next ch; repeat from * 2 more times. Fasten off. (3 shells and 4 sc = 19 sts)*
The shell centers sit at cols 4, 10 and 16, and the sc sit at cols 1, 7, 13 and 19.
Row 2 (cream): Join with sl st in first sc (col 1), ch 3 (counts as dc), 2 dc in same st, sc in center dc of next shell (col 4), shell in next sc (col 7), sc in center dc of next shell (col 10), shell in next sc (col 13), sc in center dc of next shell (col 16), 3 dc in last sc (col 19). Fasten off. (2 half shells, 2 shells and 3 sc = 19 sts)
Rows 1 and 2 form the bottom bar of the S.
Row 3 (raspberry, short row): Join with sc in top of beginning ch-3 (col 1), shell in next sc (col 4), sc in center dc of next shell (col 7), shell in next sc (col 10), sc in center dc of next shell (col 13), ch 6. Fasten off. (2 shells and 3 sc = 13 sts, plus 6 ch)
The 6 chains float over cols 14 to 19 and are not attached to Row 2. The last 6 sts of Row 2 stay unworked. This forms the lower slot, which opens to the left.
Row 4 (cream, bridge row): Join with sl st in first sc (col 1), ch 3, 2 dc in same st, sc in center dc of next shell (col 4), shell in next sc (col 7), sc in center dc of next shell (col 10), shell in next sc (col 13), sk 2 ch, sc in next ch (col 16), sk 2 ch, 3 dc in last ch (col 19). Fasten off. (2 half shells, 2 shells and 3 sc = 19 sts)
Row 4 is the full-width middle stroke of the S.
Row 5 (raspberry, short row): Skip the first 6 sts of Row 4. Join with sc in center dc of first full shell (col 7), shell in next sc (col 10), sc in center dc of next shell (col 13), shell in next sc (col 16), sc in last dc (col 19). Fasten off. (2 shells and 3 sc = 13 sts)
Cols 1 to 6 of Row 4 stay unworked. This forms the upper slot, which opens to the right.
Row 6 (cream, bridge row): Make a slipknot and ch 9. Hold the chain flat over cols 1 to 6, with the slipknot end right next to the first sc of Row 5. Working back along the chain: 2 dc in 4th ch from hook (col 1; the skipped 3 ch count as dc), sk 2 ch, sc in next ch (col 4), sk 2 ch, shell in first sc of Row 5 (col 7), sc in center dc of next shell (col 10), shell in next sc (col 13), sc in center dc of next shell (col 16), 3 dc in last sc (col 19). Fasten off. (2 half shells, 2 shells and 3 sc = 19 sts)
Row 7 (raspberry): Join with sc in top of beginning ch-3 (col 1), shell in next sc, sc in center dc of next shell; repeat from * once more, shell in next sc, sc in last dc (col 19). Do not fasten off. (3 shells and 4 sc = 19 sts)*
Rows 6 and 7 form the top bar. The body now measures 2.5 in (6.4 cm) x 3.5 in (8.9 cm).
Border
Border gauge: about 7 sc = 1 in (2.5 cm) along stitch edges. Each row end gets 3 sc, which covers a 0.5 in (1.3 cm) shell row without flaring or pulling.
Border round (raspberry, continuing from Row 7): Ch 1. Do not turn, and work around the letter in this order:
- Left edge, Rows 7 to 4: 3 sc in each row end. (12 sc)
- Lower slot: 1 sc in each free loop of the Row 3 chain, from col 19 to col 14 (6 sc). Then 3 sc in the end of Row 3 at col 13 (3 sc). Then 1 sc in each unworked st of Row 2, from col 14 to col 19 (6 sc). (15 sc)
- Left edge, Rows 2 and 1: 3 sc in each row end. (6 sc)
- Bottom edge: In the free loops of the foundation ch, work 3 sc in first loop (col 19), 1 sc in each of the next 17 loops, then 3 sc in last loop (col 1). (23 sc)
- Right edge, Rows 1 to 4: 3 sc in each row end. (12 sc)
- Upper slot: 1 sc in each unworked st of Row 4, from col 1 to col 6 (6 sc). Then 3 sc in the end of Row 5 at col 7 (3 sc). Then 1 sc in each free loop of the Row 6 chain, from col 6 to col 1 (6 sc). (15 sc)
- Right edge, Rows 6 and 7: 3 sc in each row end. (6 sc)
- Top edge: 3 sc in first st of Row 7 (col 1), 1 sc in each of the next 17 sts, then 3 sc in last st (col 19). (23 sc)
Sl st in first sc to join. Fasten off. (112 sc total)
Why the math works: The top and bottom edges each have 19 sts. Each edge’s 2 corner sts take 3 sc instead of 1, so each edge gets 17 + 3 + 3 = 23 sc. Each slot gets 6 + 3 + 6 = 15 sc, because its floor and ceiling each span the same 6 columns. The row ends add 12 + 6 = 18 sc on each side.
That gives 23 + 23 + 15 + 15 + 18 + 18 = 112 sc. The inside corners of the slots get no extra stitches, so they stay crisp. The border adds 0.125 in (0.3 cm) per side, taking 2.5 in x 3.5 in (6.4 cm x 8.9 cm) up to 2.75 in x 3.75 in (7.0 cm x 9.5 cm).
Flowers and Leaves
Flower center (make 3, yellow): MR, 5 sc in ring, pull the ring closed, sl st in first sc. Fasten off. (5 sc)
Petals (cream): Join with sl st in any sc of the center. (Ch 2, 2 dc, ch 2, sl st) in same st, sl st in next sc; repeat from * 4 more times. The final sl st lands in the joining st. Fasten off, leaving a 6 in (15.2 cm) tail for sewing. (5 petals)* Each flower is about 0.9 in (2.3 cm) across.
Leaf (make 6, green): Ch 5, sl st in 2nd ch from hook, sc in next ch, hdc in next ch, sc in last ch. Fasten off, leaving a 6 in (15.2 cm) tail. (4 sts) Each leaf is about 0.5 in (1.3 cm) long.
Placement:
- Flower 1: On the upper-right end of the top bar, over the ends of Rows 6 and 7. Put one leaf above it and one to the right.
- Flower 2: On the left edge of the middle stroke, over the ends of Rows 4 and 5. Put two leaves to the left, one angled up and one angled down.
- Flower 3: On the lower-right corner of the bottom bar, over Rows 1 and 2. Put one leaf below-left and one to the right.
Tuck each leaf base under its flower’s petals. Sew through the flower center and the leaf bases with small stitches that don’t show on the RS. Leave the petal tips free.
Hardware
Open a jump ring with pliers. Pass it through the border sc and the Row 7 sc above col 10, at the center of the top edge. Hook on the bottom link of the chain and close the ring fully. Use the second jump ring to join the top link of the chain to the split ring.
Final Blocking
- Weave in any remaining tails through the border on the wrong side.
- Mist the letter until it is damp but not wet. Keep the flowers dry.
- Lay it RS up and pin the outer corners to 2.75 in (7.0 cm) x 3.75 in (9.5 cm).
- Push each slot open with a fingertip and pin its inside corners.
- Ease each shell into a neat fan.
- Let it dry completely, about 2 to 3 hours, before unpinning.
- If you haven’t sewn the flowers on yet, do it now.
Final Quality-Control Checklist
- Rows 1, 2, 4, 6 and 7 have 19 sts. Rows 3 and 5 have 13 sts.
- The rows alternate raspberry and cream, starting and ending with raspberry.
- The lower slot opens to the left and the upper slot opens to the right.
- The border has 112 sc, with 3 sc at each of the 4 outer corners.
- The letter measures 2.75 in (7.0 cm) x 3.75 in (9.5 cm).
- All flowers and leaves are secure, and no sewing stitches show on the RS.
- Both jump rings are fully closed.
Troubleshooting
The S looks like a rectangle. The slots have closed up. Check that Row 3 left the last 6 sts of Row 2 unworked and Row 5 left the first 6 sts of Row 4 unworked. Then block again with the slots pinned open.
The bridge chain is twisted. Pull out the row and chain again, keeping the chain flat.
The border ruffles at the sides. Work 2 sc per row end instead of 3, and adjust the side counts to match.
The border cups at the sides. Your sc may be tight. Go up one hook size for the border only.
The shells lean. Make sure each sc goes into the 3rd (center) dc of the shell below.
The petals curl. Steam the flower lightly and flatten it with your finger.
Care
Hand wash in cool water with mild soap, press the water out in a towel and dry flat. Don’t wring it, and keep the metal hardware away from bleach.

Final Notes
Here is the measurement chain. Row 1 sets the width at 2.5 in (6.4 cm). Seven rows of 0.5 in (1.3 cm) each make 3.5 in (8.9 cm) of height. The short rows and bridge rows leave two slots about 0.8 in (2.0 cm) wide. The 112-st border brings the letter to 2.75 in (7.0 cm) x 3.75 in (9.5 cm). Add the 1 in (2.5 cm) ring and the chain, and your keychain is ready to clip on.
Happy crocheting!