Blossom Initial Z Keychain Crochet Pattern

This cheerful letter Z keychain is soft, puffy, and covered in tiny spring flowers. A light blue Z forms the base. Its upper-left corner has a bright pink blossom with dangling buds, and its lower-right corner has a light pink and bright pink pair of flowers framed by green leaves.

The palette is gentle: sky blue, two pinks, leafy green, and sunny yellow centers. A gold chain, a key ring, and a little pink heart charm make it a ready-to-gift bag accessory. All instructions use US crochet terms.

The finished Z measures about 3.85 in (9.8 cm) wide and 3.75 in (9.5 cm) tall, and it is about 0.5 in (1.3 cm) thick. Including the hardware, it hangs about 6.25 in (15.9 cm) long.

Construction is simple. You crochet two identical flat Z layers in rows, starting with the bottom bar, shifting a diagonal strip, then chaining out for the top bar. One round of single crochet joins the layers and lightly encloses the stuffing. The flowers, buds, leaves, and heart are made separately and sewn on.

Finished Size and Construction

  • Finished size: 3.85 in (9.8 cm) wide × 3.75 in (9.5 cm) tall × 0.5 in (1.3 cm) thick
  • Skill level: Easy-intermediate
  • Terminology: US
  • Yarn weight: DK (#3) cotton
  • Hook: 2.75 mm (US C/2)
  • Number of pieces: one keychain charm (front and back layers closed by the edging round, plus sewn-on embellishments)
  • Layout: a single letter Z, worked bottom to top
  • Layer size before edging: 3.6 in (9.1 cm) wide × 3.5 in (8.9 cm) tall
  • Edging depth: about 1/8 in (0.3 cm) per side

Materials

Choose a smooth, mercerized or soft DK cotton. It shows the stitch definition clearly and holds the letter’s shape.

  • Light blue: 12 g / 28 m (Z layers and edging)
  • Light pink: 3 g / 7 m (large flower, buds)
  • Bright pink: 5 g / 12 m (two flowers, heart)
  • Green: 3 g / 7 m (leaves, stems)
  • Yellow: 1 g / 2 m (flower centers)
  • White: a 6 in (15.2 cm) scrap (heart loop)

All quantities include a small margin for swatching and tails.

Tools:
– 2.75 mm (US C/2) hook
– Polyester fiberfill (a small handful)
– Tapestry needle
– Stitch markers
– Gold split key ring, about 1 in (2.5 cm)
– Gold chain, about 1.5 in (3.8 cm)
– Two gold jump rings
– Two pairs of flat-nose pliers
– Scissors
– Pins

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together
  • st(s) – stitch(es)
  • inc – 2 sc in the same st
  • MR – magic ring
  • RS / WS – right side / wrong side

Special stitch – edge sc2tog (inner corner): Insert the hook into the first position (a row end or stitch), yarn over, and pull up a loop. Insert into the second position, yarn over, and pull up a loop. Yarn over and pull through all 3 loops.

Gauge and Checkpoints

Gauge in sc with a 2.75 mm hook is 10 sts and 12 rows = 2 in (5.1 cm), which is 5 sts and 6 rows per 1 in (2.5 cm).

Make one complete Z layer first and treat it as your gauge test. Check it at each stage:
– After Row 5: 3.6 in (9.1 cm) wide, 0.83 in (2.1 cm) tall
– After Row 16: 2.67 in (6.8 cm) tall; the diagonal strip is 1.4 in (3.6 cm) wide, measured horizontally
– After Row 21: 3.6 in (9.1 cm) × 3.5 in (8.9 cm)
– After edging: 3.85 in (9.8 cm) × 3.75 in (9.5 cm)

If your layer is too big, go down to a 2.5 mm hook. If it is too small, go up to a 3.0 mm hook. Stuffing will hide small differences, but the front and back layers must match each other exactly.

Pink crocheted flowers with yellow centers and green leaves adorning a light blue textured knitted band.

Z Layer (make 2, light blue)

Bottom Bar

Ch 19.

Row 1: Sc in 2nd ch from hook and in each ch across. (18 sts)

Rows 2–5: Ch 1, turn. Sc in each st across. (18 sts)

Row 5 ends at the left edge. Checkpoint: 3.6 in (9.1 cm) × 0.83 in (2.1 cm).

Diagonal Strip

The strip is 7 sts wide. Each row decreases at the left end and increases at the right end, so the count stays at 7 while the strip moves 1 st to the right. Over 11 rows it travels from sts 1–7 to sts 12–18.

Row 6: Ch 1, turn. Sc2tog over the first 2 sts, sc in the next 4 sts, inc in the next st. Leave the remaining 11 sts unworked. (7 sts)

Row 7: Ch 1, turn. Inc in the first st, sc in the next 4 sts, sc2tog. (7 sts)

Rows 8, 10, 12, 14, 16: Repeat Row 6, working across all 7 sts. (7 sts)

Rows 9, 11, 13, 15: Repeat Row 7. (7 sts)

Row 16 ends at the right edge, in line with the right edge of the bottom bar. Checkpoint: 2.67 in (6.8 cm) total height.

Top Bar

Row 17: Ch 1, turn. Sc in each st across. (7 sts) At the end of the row, ch 12 and turn.

Row 18: Sc in 2nd ch from hook and in each of the next 10 ch (11 sc), then sc in each of the 7 strip sts. (18 sts)

Rows 19–21: Ch 1, turn. Sc in each st across. (18 sts)

Fasten off. Checkpoint: 3.6 in (9.1 cm) × 3.5 in (8.9 cm).

Make a second identical layer. Weave in all ends on both layers.

Flowers

Large flower (make 1 light pink, 1 bright pink):
– Rnd 1: MR, ch 1, 5 sc in ring, sl st to first sc. (5 sts)
– Rnd 2: Ch 1, inc in each st, sl st to first sc. (10 sts)
– Rnd 3: *Sc in next st, (hdc, 3 dc, hdc) in next st; repeat from * 4 more times. Sl st to first sc. (30 sts: 5 sc + 25 petal sts, 5 petals)

Fasten off, leaving a 12 in (30.5 cm) tail. Each large flower is about 1.25 in (3.2 cm) across.

Small flower (make 1, bright pink):
– Rnd 1: MR, ch 1, 10 sc in ring, sl st to first sc. (10 sts)
– Rnd 2: *Sc in next st, (hdc, 2 dc, hdc) in next st; repeat from * 4 more times. Sl st to first sc. (25 sts: 5 sc + 20 petal sts, 5 petals)

Fasten off with a long tail. The small flower is about 1 in (2.5 cm) across.

Centers: With yellow, work 3 French knots close together in the middle of each flower.

Buds (make 8, light pink)

Rnd 1: MR, ch 1, 6 sc in ring. Pull the ring tight. (6 sts)

Sl st to the first sc and fasten off. Thread the tail through the front loops and cinch it into a firm ball about 0.3 in (0.8 cm) across.

Leaves (make 6, green)

Ch 7.

Rnd 1: Sc in 2nd ch from hook, hdc in next ch, dc in each of next 2 ch, hdc in next ch, sc in last ch. (6 sts) Ch 1, rotate, and work the same sequence along the other side of the chain. (6 sts) Sl st into the tip. (12 sts total)

Fasten off. Each leaf is about 1 in (2.5 cm) long.

Heart Charm (bright pink)

Lobe (make 2):
– Rnd 1: MR, 6 sc. (6 sts)
– Rnd 2: (Sc, inc) 3 times. (9 sts)
– Rnd 3: Sc in each st around. (9 sts)

Fasten off the first lobe. Leave the second lobe on the hook.

Body:
– Rnd 4: Sc 9 around lobe 2, then sc 9 around lobe 1. (18 sts)
– Rnd 5: (Sc 4, sc2tog) 3 times. (15 sts)
– Rnd 6: (Sc 3, sc2tog) 3 times. (12 sts) Stuff firmly.
– Rnd 7: (Sc 2, sc2tog) 3 times. (9 sts)
– Rnd 8: (Sc, sc2tog) 3 times. (6 sts)
– Rnd 9: Sc2tog 3 times. (3 sts)

Close the point and sew the gap between the lobes shut. Thread the white scrap through the top dip of the heart and knot it into a 0.75 in (1.9 cm) loop. The heart is about 1 in (2.5 cm) wide.

Edging and Joining Round

Stack the two Z layers in the same orientation, WS together, with edges aligned. Single crochet looks nearly identical on both faces, so the back reads as a neat mirror-image Z. Work every stitch through both layers with light blue.

Edging gauge: Work 1 sc per stitch along the top and bottom edges (5 per inch) and 1 sc per row end along the sides (6 per inch). The extra density on the sides helps the edge roll smoothly around the stuffing.

Round 1: With the front facing, join at the top-right corner (the first st of Row 21) and ch 1. Then work these sections in order:
– Top edge: 3 sc in the corner st, sc in the next 16 sts, 3 sc in the top-left corner st. (22 sc)
– Left side of top bar: Sc in the row ends of Rows 20, 19, and 18. (3 sc)
– Underside of top-bar chain: 3 sc in the outermost chain base, sc in the next 9 chain bases, then work an edge sc2tog over the last chain base and the row end of Row 17. (13 sc)
– Left diagonal and bottom bar side: Sc in the row ends of Rows 16 down to 1. (16 sc)
– Bottom edge: 3 sc in the first foundation-chain base, sc in the next 16 bases, 3 sc in the last base. (22 sc)
– Right side of bottom bar: Sc in the row ends of Rows 1–4. (4 sc)
– Top of bottom bar: 3 sc in st 18 of Row 5, sc in sts 17 through 9, then work an edge sc2tog over st 8 and the row end of Row 6. (13 sc)
– Right diagonal and top bar side: Sc in the row ends of Rows 7–20. (14 sc) Stop before the last 6 sts, stuff lightly to about 0.5 in (1.3 cm) thick, then finish the section.

Sl st to the first sc and fasten off. Total: 107 sc.

Why the math works:
– The edge has 97 positions: 18 on top, 15 on the upper right, 11 on top of the bottom bar, 4 on the right of the bottom bar, 18 on the bottom, 17 on the left, 11 along the chain, and 3 on the left of the top bar.
– Each of the 6 outer corners gets 2 extra stitches: 97 + 12 = 109.
– Each of the 2 inner corners loses 1 stitch to its sc2tog: 109 − 2 = 107.

Corners are counted once, inside their own edge, never twice. The edging adds about 1/8 in (0.3 cm) per side, bringing 3.6 × 3.5 in (9.1 × 8.9 cm) up to 3.85 × 3.75 in (9.8 × 9.5 cm).

Final Blocking

  1. Lightly steam the flowers and leaves without touching the iron to the yarn, then pin them flat to dry.
  2. Spray the Z lightly with water and pat the bars straight.
  3. Roll the edge between your fingers to round the corners evenly.
  4. Let everything dry completely.
  5. Pin the clusters in place:
  6. Upper left: the bright pink large flower with 3 leaves and 5 buds, overlapping the top-left corner.
  7. Lower right: the light pink large flower, the small bright pink flower below and to its right, 3 leaves, and 3 buds, overlapping the bottom-right corner.
  8. Sew each piece on with its tail through the front layer only.
  9. Embroider short green backstitch stems so 2 of the upper buds dangle below their flower.
  10. Open a jump ring and pass it through an edging stitch on the top bar, 1.25 in (3.2 cm) from the top-left corner. Attach the chain.
  11. Use the second jump ring to join the chain to the key ring. Slip the heart’s loop onto the ring.

Final Quality-Control Checklist

  • Both layers measure 3.6 × 3.5 in (9.1 × 8.9 cm) before edging.
  • The edging totals 107 sc with 6 rounded outer corners.
  • The stuffing is even, and no fiberfill shows between stitches.
  • The diagonal edges are smooth, with no stair-step gaps.
  • The flowers lie flat and the yellow centers are secure.
  • The jump rings are fully closed.
  • The heart loop is knotted tightly.

Troubleshooting

  • Diagonal leans the wrong way: The increase must always sit at the right end and the decrease at the left end (as seen from the front).
  • Strip count drifts from 7: Recount after every row. A missed inc or sc2tog changes the angle.
  • Layers don’t line up: One layer has an extra row. Frog it back and match the row counts.
  • Inner corners pucker: Make sure you worked the edge sc2tog and did not use 2 separate sc.
  • Edge ruffles: Your edging tension is too loose. Work it with a firm, even pull.
  • Charm too flat or too stiff: Adjust the stuffing before you close the final 6 sts.

Care

Spot clean with mild soap and cool water, then air dry flat. Do not machine wash, because the hardware and stuffing can be damaged.

Cream canvas tote bag with crocheted blue number two decorated with pink flowers, yellow centers, and green leaves, hanging outdoors.

Final Notes

The measurement chain runs like this:
1. Gauge of 5 sts and 6 rows per inch (2.5 cm)
2. Bottom bar of 3.6 × 0.83 in (9.1 × 2.1 cm)
3. Diagonal finished at 2.67 in (6.8 cm) tall
4. Layer of 3.6 × 3.5 in (9.1 × 8.9 cm)
5. Edging of 107 sc, giving 3.85 × 3.75 in (9.8 × 9.5 cm)

Once your first layer matches, the rest is pure decoration. Try other flower colors to make the charm your own.

Happy crocheting!

Leave a Comment