Blue Blossom Letter E Keychain Crochet Pattern

The Blue Blossom Letter E Keychain is a padded initial with a small spray of flowers along its spine. The letter is sky blue with a smooth, dense single crochet surface. White, cream and medium-blue flowers with yellow centers sit in a column down the left side among small green leaves. A tiny blue heart hangs beside the letter on its own gold chain.

The style is soft, fresh and a little cottagecore. It makes a good personalized gift for a tote, backpack or set of keys.

This pattern uses US crochet terms. The finished letter measures 2 3/4 in (7.0 cm) wide by 3 3/4 in (9.5 cm) tall, measured flat after the border.

Construction overview: You’ll make two identical flat letter panels in single crochet rows. You add the arms with chains and end them by leaving stitches unworked. One single crochet round worked through both panels joins them and forms the border. You stuff the letter lightly before closing it. Then you add the flowers, leaves, heart and hardware.

Finished Size and Construction

  • Finished size: 2 3/4 in (7.0 cm) x 3 3/4 in (9.5 cm)
  • Skill level: Easy-Intermediate
  • Terminology: US
  • Yarn weight: DK (#3 light) cotton
  • Hook: 2.75 mm (US C/2)
  • Number of pieces: 2 letter panels, 3 flowers, 5 leaves, 2 heart layers
  • Layout: front and back panels stacked, with the flowers in a vertical column on the left spine
  • Panel size: 2 1/2 in (6.4 cm) x 3 1/2 in (8.9 cm)
  • Size before border: 2 1/2 in (6.4 cm) x 3 1/2 in (8.9 cm)
  • Border depth: 1/8 in (0.3 cm) on every side

Materials

Choose a smooth cotton in DK weight, about 125 m per 50 g. Cotton gives crisp stitches and keeps the letter firm. Avoid fuzzy yarns, because they blur the tiny flowers.

  • Color A, Sky Blue (letter and heart): 15 g, about 37 m
  • Color B, White (top flower): 3 g, about 8 m
  • Color C, Cream (middle flower): 3 g, about 8 m
  • Color D, Medium Blue (bottom flower): 3 g, about 8 m
  • Color E, Yellow (flower centers): 2 g, about 5 m
  • Color F, Green (leaves): 4 g, about 10 m

Tools:
– 2.75 mm (US C/2) crochet hook
– Tapestry needle
– Small amount of polyester fiberfill
– 1 gold split key ring, 1 in (2.5 cm)
– 2 gold jump rings, 1/4 in (0.6 cm)
– Gold chain: one piece 1 1/2 in (3.8 cm) long and one 3/4 in (1.9 cm) long
– 2 flat-nose pliers
– Stitch marker, pins and a ruler

All quantities include a margin for swatching and sewing tails.

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • tr: treble crochet
  • MR: magic ring
  • st(s): stitch(es)
  • WS: wrong side

Special stitch, Petal: (sl st, ch 2, 2 dc, ch 2, sl st) all in the same stitch.

Gauge and Checkpoints

Gauge: 12 sc and 12 rows = 2 in (5.1 cm) in sc worked flat. That works out to 6 stitches and 6 rows per inch (2.5 cm). This square gauge matters because the border places 1 sc in each row end.

Make one full panel before you start the second one, and check it at these points:

  • After Row 5: width is 2 1/2 in (6.4 cm).
  • After Row 8: spine is 1 in (2.5 cm) wide.
  • After Row 12: total height is 2 in (5.1 cm).
  • After Row 21: panel is 2 1/2 in (6.4 cm) x 3 1/2 in (8.9 cm).

Too big? Switch to a 2.5 mm hook. Too small? Switch to a 3.0 mm hook. If the width is right but the height is off, change how high you draw up your loops. The row ends need to stay close to 6 per inch.

Handmade blue crocheted cactus charm with white and cream flowers, yellow centers, and green leaves on gold keyring.

Letter Panel (make 2, Color A)

You work the panel from the bottom up. The spine always stays on the same side, which these instructions call side S.

Row 1: Ch 16. Sc in 2nd ch from hook and in each ch across. The row ends at side S. (15 sc)

Rows 2–5: Ch 1, turn, sc in each st across. (15 sc)

Checkpoint: the piece is 2 1/2 in (6.4 cm) wide.

Row 6 (spine begins): Ch 1, turn, sc in first 6 sts. Leave the remaining 9 sts unworked. (6 sc)

Row 7: Ch 1, turn, sc in each st. The row ends at side S. (6 sc)

Row 8: Ch 1, turn, sc in each st. The row ends at the inner edge. Ch 8 for the middle arm. (6 sc + 8 ch)

Row 9 (middle arm): Turn. Sc in 2nd ch from hook and in the next 6 ch (7 sc). Then sc in the 6 spine sts. (13 sc)

Rows 10–13: Ch 1, turn, sc in each st across. Row 13 ends at side S. (13 sc)

Row 14: Ch 1, turn, sc in first 6 sts. Leave the remaining 7 sts unworked. (6 sc)

Row 15: Ch 1, turn, sc in each st. (6 sc)

Row 16: Ch 1, turn, sc in each st. The row ends at the inner edge. Ch 10 for the top arm. (6 sc + 10 ch)

Row 17 (top arm): Turn. Sc in 2nd ch from hook and in the next 8 ch (9 sc). Then sc in the 6 spine sts. (15 sc)

Rows 18–21: Ch 1, turn, sc in each st across. (15 sc)

On the first panel, fasten off. On the second panel, leave a 12 in (30.5 cm) tail and put the live loop on a stitch marker. You’ll use this loop to work the border.

Stitches per panel: 75 + 18 + 65 + 18 + 75 = 251 sc.

The arms are 5 rows tall and the gaps between them are 3 rows. The middle arm is 2 stitches shorter than the top and bottom arms.

Flowers (make 3)

Make one flower each in Color B, Color C and Color D.

Rnd 1 (Color E): MR, 6 sc in ring, sl st to first sc. Pull the ring tight and fasten off. (6 sc)

Rnd 2 (petal color): Join with sl st in any sc. Ch 2, 2 dc in same st, ch 2, sl st in same st. *Petal in next st; rep from * 3 more times. Sl st in the first sl st. (5 petals; 1 center st left unworked)

Fasten off and leave an 8 in (20.3 cm) tail for sewing. Each flower is about 1 in (2.5 cm) across. The skipped stitch hides under the petals and keeps the center from cupping.

Leaves (make 5, Color F)

Ch 7. Sl st in 2nd ch from hook, then sc, hdc, dc, hdc in the next 4 ch, and sc in the last ch. (6 sts)

Ch 2, sl st in 2nd ch from hook to make the pointed tip.

Working along the opposite side of the foundation chain: sc, hdc, dc, hdc, sc in the next 5 ch, then sl st in the last ch. (6 sts)

Each leaf has 12 sts plus the tip and is about 1 in (2.5 cm) long. The foundation chain looks like a center vein. Leave an 8 in (20.3 cm) tail for sewing.

Heart Charm (make 2 layers, Color A)

Rnd 1: MR. Into the ring, work: ch 3, 2 tr, 3 dc, ch 1, tr, ch 1, 3 dc, 2 tr, ch 3, sl st into ring. Pull the ring tight to form the two lobes. (4 tr, 6 dc, 1 point tr)

Fasten off one layer and keep the other live. Hold the layers WS together. Sl st through both layers around the edge, and add a pinch of fiberfill before you close it. The heart is about 3/4 in (1.9 cm) wide.

Make All Pieces

Before you assemble, check that you have:

  • Color A: 2 letter panels and 1 finished two-layer heart
  • Colors B, C and D: 1 flower each, with Color E centers
  • Color F: 5 leaves

Appliqué layout (front panel, spine on the left):

TOP ARM     [Leaf] [WHITE flower] [Leaf]
MIDDLE ARM  [Leaf] [CREAM flower]
            [Leaf]
BOTTOM ARM         [BLUE flower]  [Leaf]

Each flower overhangs the left edge by about 1/4 in (0.6 cm).

Joining

The two panels are joined during the border round, matching them stitch to stitch. Place the finished panel behind the live panel, WS together, and flip it so both spines are on the left. Single crochet looks almost the same on both sides, so the flipped panel matches the front.

Both panels have the same count on every edge: for example, 15 sts on the top and bottom and 21 row ends up the spine. So every front stitch has an exact partner on the back.

Pin the corners and insert the hook through both layers for every stitch. Keep your tension moderate. A tight edge cups, and a loose edge lets stuffing show.

Size checkpoint: the pinned panels still measure 2 1/2 in (6.4 cm) x 3 1/2 in (8.9 cm).

Border (Joining Round)

Border gauge: 6 sc per inch (2.5 cm), the same as the panel. Work 1 sc in each stitch, chain loop or row end. At each of the 8 outer corners, work 3 sc in the corner stitch. At each of the 4 inside corners, work 1 sc only.

Rnd 1: Join Color A in the first foundation st at the bottom-left corner. With the front panel facing you, work counterclockwise:

Edge Base sts Corner extras Border sc
Bottom edge (2 outer corners) 15 +4 19
Bottom arm tip, row ends 5 0 5
Top of bottom arm (1 outer corner) 9 +2 11
Lower spine gap, row ends 3 0 3
Underside of middle arm (1 outer corner) 7 +2 9
Middle arm tip, row ends 5 0 5
Top of middle arm (1 outer corner) 7 +2 9
Upper spine gap, row ends 3 0 3
Underside of top arm (1 outer corner) 9 +2 11
Top arm tip, row ends 5 0 5
Top edge (2 outer corners) 15 +4 19
Left spine, row ends 21 0 21
Total 104 +16 120 sc

When about 12 spine row ends remain, stop and stuff the letter lightly. Use the back of the hook to push fiberfill into each arm. Finish the round, sl st to the first sc and fasten off. Hide the tail inside the letter.

Why the math works: The base count of 104 is exactly one panel’s edge stitches. No extra stitches are added at the seams. Each outer corner turns 1 stitch into 3, so 8 corners × 2 = 16 extra stitches. Because the gauge is square, 1 sc per row end keeps the sides flat.

The border adds 1/8 in (0.3 cm) on each side. That makes the letter 2 1/2 + 1/4 = 2 3/4 in (7.0 cm) wide and 3 1/2 + 1/4 = 3 3/4 in (9.5 cm) tall.

Final Blocking

  1. Lay the letter face up on a towel.
  2. With your fingers, ease each arm straight and square up the corners.
  3. Hold a steam iron about 1 in (2.5 cm) above the letter and steam it. Don’t press.
  4. Pin the letter to 2 3/4 in (7.0 cm) x 3 3/4 in (9.5 cm) and let it dry.
  5. Steam the flowers and leaves flat, then open each petal with a pin.
  6. Pin the appliqués in place following the layout, with the leaves tucked partly under the flowers.
  7. Sew each piece through the front panel only. Hide your stitches under the petal edges.
  8. Pass a jump ring through the top-left border corner, catching both layers. Attach the 1 1/2 in (3.8 cm) chain and connect it to the split ring.
  9. Hang the heart from the split ring on the 3/4 in (1.9 cm) chain, using the second jump ring.

Final Quality-Control Checklist

  • The letter measures 2 3/4 in (7.0 cm) x 3 3/4 in (9.5 cm), within 1/8 in (0.3 cm).
  • The border has 120 sc and all 8 outer corners are crisp.
  • No stuffing shows through the edge.
  • The middle arm is visibly shorter than the top and bottom arms.
  • There are 3 flowers with 5 petals each, and the centers are closed.
  • All 5 leaves are secure.
  • The jump rings are fully closed.
  • All tails are hidden.

Troubleshooting

  • Too wide but the right height: go down half a hook size and draw up taller loops.
  • Arms curl: the arm chains were too tight. Chain with a hook one size larger.
  • Holes at the inside corners: work the inside-corner sc through both layers and catch the stitch next to it.
  • Rippled edges: you added extra sc on the row ends. Work exactly 1 per row.
  • Lumpy letter: there is too much fiberfill. Pull out a few wisps with the hook.

Care

Spot clean with mild soap and cool water. Press gently in a towel and let it dry flat, away from heat.

Light blue crocheted keychain with white flowers and green leaves hanging from a denim bag strap held in hand.

Final Notes

Here is the measurement chain:

  • Gauge of 6 sc and 6 rows per inch (2.5 cm)
  • Each 15-st by 21-row panel measures 2 1/2 in (6.4 cm) x 3 1/2 in (8.9 cm)
  • The border turns 104 edge stitches into 120 sc and adds 1/8 in (0.3 cm) on each side
  • The finished letter is 2 3/4 in (7.0 cm) x 3 3/4 in (9.5 cm)

Check your first panel against the checkpoints, and the rest will follow.

Happy crocheting!

Leave a Comment