Woven Checker Letter W Keychain Crochet Pattern

This little keychain is a chunky block letter W in a rust and cream checkerboard. It has a crisp rust edge and three tiny cream daisies with sage leaves. It hangs from a gold split ring and looks lovely clipped to a tote, backpack, or set of keys.

The checks are made with tapestry single crochet. Single crochet stitches lean slightly, so the cream blocks look like little vertical bars and the rust blocks look like horizontal bars. The fabric reads almost like woven basketry.

This pattern uses US crochet terms. The finished letter measures 4.25 in (10.8 cm) wide by 3.25 in (8.3 cm) tall, including the border.

The letter is one single piece worked flat from the bottom up. You make two small feet, join them with a chain bridge, work a solid band, then split into three arms. One round of rust single crochet outlines the whole shape. The flowers and leaves are sewn on last.

Finished Size and Construction

  • Finished size: 4.25 in (10.8 cm) wide x 3.25 in (8.3 cm) tall
  • Skill level: Intermediate (tapestry crochet, simple shaping)
  • Terminology: US
  • Yarn weight: DK / light worsted (#3) cotton
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 1 letter body, plus 3 flowers and 6 leaves as appliqués
  • Layout: single letter, no joining between pieces
  • Body grid: 20 stitches wide x 18 rows tall
  • Size before border: 4 in (10.2 cm) x 3 in (7.6 cm)
  • Border depth: 1/8 in (0.3 cm) on every edge, adding 0.25 in (0.6 cm) to each dimension

Materials

Choose a smooth, mercerized or combed cotton in DK weight. Cotton holds the sharp corners of the letter and stands up to life on a keyring. Avoid fuzzy yarns, which blur the checks.

  • Rust: about 6 g / 13 m (body checks and border)
  • Cream: about 5 g / 11 m (body checks and flower petals)
  • Golden yellow: about 1 g / 2 m (flower centers)
  • Sage green: about 1 g / 2 m (leaves)

Quantities include a small margin for swatching and weaving in.

Tools:
– 3.5 mm (E-4) crochet hook
– Tapestry needle
– Scissors and stitch markers
– 1 in (2.5 cm) gold split ring with a short chain and jump ring
– Two pairs of small pliers
– Blocking mat and pins

Abbreviations (US Terms)

  • ch – chain
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sl st – slip stitch
  • sc2tog – single crochet 2 together
  • st(s) – stitch(es)
  • MR – magic ring
  • RS / WS – right side / wrong side
  • R2 – 2 sc in rust
  • C2 – 2 sc in cream

Special stitch – tapestry sc: Lay the color you are not using along the top of the previous row and work each sc over it, so it is hidden inside the stitches. To change color, work the last sc of the old color until 2 loops remain on the hook. Then yarn over with the new color and pull through. Keep the carried strand relaxed.

Column note: Columns are numbered 1 to 20 from left to right as seen from the RS. RS rows travel from right to left; WS rows travel from left to right.

Gauge and Checkpoints

Gauge: 10 sts and 12 rows = 2 in (5.1 cm) square in tapestry sc checks. That is 5 sts and 6 rows per 1 in (2.5 cm).

Work a small swatch of 10 sts in R2/C2 for 12 rows, changing the starting color every 2 rows. If it is too big, go down 0.25 mm. If it is too small, go up 0.25 mm. Check again after each foot and at every checkpoint below, because the letter is small and errors show quickly.

Checkpoints:
– Each foot after Row 4: 1.6 in (4.1 cm) wide x 2/3 in (1.7 cm) tall
– Body after Row 5: 4 in (10.2 cm) wide
– Body after Row 10: 1 2/3 in (4.2 cm) tall
– Each arm after Row 18: 0.8 in (2.0 cm) wide
– Body after Row 18: 4 in (10.2 cm) x 3 in (7.6 cm)
– After border: 4.25 in (10.8 cm) x 3.25 in (8.3 cm)

If the body is too wide, rows are usually too loose, so tighten the carried strand slightly. If it curls, the carried strand is too tight, so stretch each row flat before turning.

Crochet W keychain showing progression from plain checkerboard pattern to finished piece with flower embellishments.

Letter Body

Start every row with ch 1 and turn; the ch 1 never counts as a stitch. Carry both colors through every row.

Feet (make 2)

The two feet are identical. Make the left foot first and fasten off. Make the right foot but do not fasten off.

Foundation: With cream and carrying rust, ch 9.

Row 1 (RS): Sc in 2nd ch from hook and in each ch across, working C2, R2, C2, R2. (8 sts)

Row 2 (WS): R2, C2, R2, C2. (8 sts)

Row 3: R2, C2, R2, C2. (8 sts)

Row 4: C2, R2, C2, R2. (8 sts)

Left foot only: fasten off both colors, leaving 6 in (15.2 cm) tails. Right foot: keep the working loop live.

Joining Band

Place the left foot to the left of the right foot, RS facing you, with the bottom edges level. Leave a 4-st gap between them.

Row 5 (RS): Ch 1, turn. Across the right foot: C2, R2, C2, R2. Ch 2 in cream, then ch 2 in rust, carrying the unused color loosely behind the chains. Across Row 4 of the left foot: C2, R2, C2, R2. (16 sc + 4 ch = 20 sts)

This chain bridge forms the top of the bottom center notch. The notch is 4 sts (0.8 in / 2.0 cm) wide and 4 rows (2/3 in / 1.7 cm) deep.

Row 6 (WS): Sc in each sc and in each ch, working (R2, C2) 5 times. (20 sts)

Row 7: (R2, C2) 5 times. (20 sts)

Row 8: (C2, R2) 5 times. (20 sts)

Row 9: (C2, R2) 5 times. (20 sts)

Row 10: (R2, C2) 5 times. (20 sts)

Checkpoint: 4 in (10.2 cm) wide x 1 2/3 in (4.2 cm) tall. Do not fasten off.

Right Arm

The top notches are stepped. For 2 rows they are 2 sts wide; for the last 6 rows they widen to 4 sts. This gives the V-shaped slots in the photo.

Row 11 (RS): Ch 1, turn. Over columns 20 to 15 only: R2, C2, R2. Leave the rest unworked. (6 sts)

Row 12: R2, C2, R2. (6 sts)

Row 13: C2, R2, leaving the last 2 sts unworked. (4 sts)

Row 14: R2, C2. (4 sts)

Row 15: R2, C2. (4 sts)

Row 16: C2, R2. (4 sts)

Row 17: C2, R2. (4 sts)

Row 18: R2, C2. (4 sts)

Fasten off both colors.

Middle Arm

Skip 2 sts of Row 10 to the left of the right arm (columns 14 and 13).

Row 11 (RS): Join rust in the next st (column 12), carrying cream. R2, C2. (4 sts)

Row 12: C2, R2. (4 sts)

Rows 13–18: Work as Rows 13–18 of the right arm. (4 sts each row)

Fasten off.

Left Arm

Skip the next 2 sts of Row 10 (columns 8 and 7).

Row 11 (RS): Join cream in the next st (column 6), carrying rust. C2, R2, C2. (6 sts)

Row 12: C2, R2, C2. (6 sts)

Row 13: Ch 1, turn, sl st in first 2 sts, ch 1 (does not count), then C2, R2. (4 sc, plus 2 sl sts that form a small ledge)

Rows 14–18: Work as Rows 14–18 of the right arm. (4 sts each row)

Fasten off. Weave in all body tails on the WS before the border.

Checkpoint: 4 in (10.2 cm) x 3 in (7.6 cm). The top notches are 8 rows (1 1/3 in / 3.4 cm) deep, with the bottom 2 rows narrowed to 2 sts.

Border

Border gauge: Work 1 sc in each stitch along top and bottom edges and 1 sc in each row-end along side edges. Outer (convex) corners get 3 sc in the corner st. Inner (concave) corners get one sc2tog that bridges the two edges. The border sits 1/8 in (0.3 cm) deep.

With RS facing, join rust in the last st of the right arm top (column 20, top right corner).

Border round:
– Right arm top: 3 sc in first st, sc in next 2, 3 sc in last st. (8)
– Right arm inner edge: sc in row-ends 18 down to 14. (5)
– Right ledge: sc2tog over row-end 13 and the first unworked st of Row 12; 3 sc in the next st. (4)
– Sc in row-end 12. (1)
– Right notch bottom: sc2tog over row-end 11 and the first skipped st of Row 10; sc2tog over the second skipped st and row-end 11 of the middle arm. (2)
– Middle arm right edge: sc in row-ends 12 up to 18. (7)
– Middle arm top: 3 sc in first st, sc in next 2, 3 sc in last st. (8)
– Middle arm left edge: sc in row-ends 18 down to 12. (7)
– Left notch bottom: sc2tog over row-end 11 and the first skipped st; sc2tog over the second skipped st and row-end 11 of the left arm. (2)
– Left ledge: sc in row-end 12; 3 sc in the first sl st; sc2tog over the second sl st and row-end 13. (5)
– Left arm inner edge: sc in row-ends 14 up to 18. (5)
– Left arm top: 3 sc in first st, sc in next 2, 3 sc in last st. (8)
– Left outer side: sc in row-ends 18 down to 1. (18)
– Left foot bottom, along the foundation chain: 3 sc in first st, sc in next 6, 3 sc in last st. (12)
– Left foot inner edge: sc in row-ends 1 up to 3. (3)
– Bottom notch: sc2tog over row-end 4 and the first ch; sc in next 2 ch; sc2tog over the last ch and row-end 4 of the right foot. (4)
– Right foot inner edge: sc in row-ends 3 down to 1. (3)
– Right foot bottom: 3 sc in first st, sc in next 6, 3 sc in last st. (12)
– Right outer side: sc in row-ends 1 up to 18. (18)

Sl st to first sc to join. (132 sts)

Why the math works: The body outline has 40 stitch-edge sts and 76 row-ends, for 116 base sts. There are 12 outer corners at +2 each (+24) and 8 inner corners at −1 each (−8). 116 + 24 − 8 = 132, which matches the section totals above. Each side of the letter mirrors the other: the right arm’s inner edge and ledge total 10, and so do the left arm’s.

Fasten off and weave in.

Flowers and Leaves

Flower (make 3)

Rnd 1: With yellow, 5 sc in MR. Sl st to first sc. Fasten off yellow. (5 sts)

Rnd 2: Join cream in any st. (Ch 2, 2 dc, ch 2, sl st) in each st around. (5 petals)

Fasten off, leaving a 6 in (15.2 cm) tail. Each flower measures about 0.9 in (2.3 cm) across.

Leaf (make 6)

With green, ch 5. Sl st in 2nd ch from hook, sc in next ch, hdc in next ch, sc in last ch. (4 sts)

Fasten off with a tail. Each leaf is about 0.6 in (1.5 cm) long.

Placement

Tuck 2 leaves behind each flower, angled out to the sides. Sew one flower near the top of the left arm and one near the top of the right arm. Sew the third flower centered at the bottom, over the joining band above the bottom notch. Stitch through the petal bases and leaf tips so nothing flips up.

Final Blocking

  1. Lightly mist the letter with water until just damp.
  2. Pin it flat, RS up, at 4.25 in (10.8 cm) x 3.25 in (8.3 cm).
  3. Pin each outer corner square and push the notch corners into crisp angles.
  4. Let it dry completely.
  5. Steam the flowers separately on a towel, shaping the petals round.
  6. Once dry, attach the jump ring through the top of the middle arm, centered between columns 10 and 11, just below the border. Close it firmly with pliers.

Final Quality-Control Checklist

  • Border round counts 132 sts.
  • Letter measures 4.25 in (10.8 cm) x 3.25 in (8.3 cm).
  • Each check is 2 sts x 2 rows and the colors alternate cleanly.
  • No carried strand shows on the RS.
  • All 12 outer corners are square; all 8 inner corners lie flat.
  • Flowers and leaves are stitched down at every petal base.
  • Jump ring is fully closed.

Troubleshooting

Carried color peeks through: Use a smaller hook or tug the working yarn after each color change.

Letter curls or cups: The carried strand is too tight. Unravel a few rows and keep it slack.

Side edges ripple: Your rows are taller than gauge. Skip 1 row-end per 6 on the outer sides only and recount.

Notch corners bulge: Make sure every inner corner is a sc2tog, not 2 separate sc.

Checks drift out of line: Recount each block; one extra st at a color change shifts the whole row.

Care

Hand wash in cool water with mild soap and lay flat to dry. Remove the metal ring first to avoid rust stains on the yarn.

Rust-colored crocheted W-shaped charm with checkered pattern and white daisies, hanging from a cream tote bag outdoors.

Final Notes

The measurement chain is simple. 5 sts and 6 rows per 1 in (2.5 cm) give feet of 1.6 in (4.1 cm), a 20-st body of 4 in (10.2 cm), and 18 rows of 3 in (7.6 cm). One 132-st rust border adds 1/8 in (0.3 cm) per edge, for a finished letter of 4.25 in (10.8 cm) x 3.25 in (8.3 cm). Check each step, and the W comes out crisp and square.

Happy crocheting!

Leave a Comment