The Evergreen Hearth set is a cozy holiday piece for the table: four rounded-square coasters and a matching open-top holder to keep them in. Each coaster has a soft cream background, a forest-green rope-style edge, a three-tier green Christmas tree appliqué and three embroidered gold stars.
The holder is a small cream box with a U-shaped notch in the front and back walls, so you can pinch a coaster out of the stack. A green rope rim runs along the whole top edge and dips into both notches. Each of the two plain side walls has a mini green tree with a gold star.
All instructions use US crochet terms. Each coaster finishes at 4.5 in (11.4 cm) square. The holder is about 5.25 in (13.3 cm) square at the base and 3.375 in (8.6 cm) tall at the rim.
Construction is simple. You work the coasters in joined rounds of single crochet from the center out, with ch-1 corners that the last cream round softens into curves. You work the trees flat in rows and sew them on, embroider the stars, and finish with a two-round green border. The holder starts as a larger square base. The walls grow straight up from it, then split into two arms worked in rows to form the notches.
Finished Size and Construction
- Finished coaster size: 4.5 in (11.4 cm) square, rounded corners
- Finished holder size: 5.25 in (13.3 cm) square, 3.375 in (8.6 cm) tall
- Skill level: Advanced beginner
- Terminology: US
- Yarn weight: Worsted (#4) cotton
- Hook: 3.75 mm (US F-5)
- Number of pieces: 4 coasters, 4 large trees, 1 holder, 2 mini trees (separate pieces; the coasters are not joined to each other)
- Layout: The coasters stack loose inside the holder
- Coaster size before border: 3.75 in (9.5 cm)
- Border depth: 0.375 in (1.0 cm) per side
Materials
Use a smooth 100% cotton worsted yarn with about 85 m (93 yd) per 50 g. Cotton soaks up moisture and keeps the crisp shape that a coaster and a box need. Avoid acrylic, which doesn’t absorb water and softens over time.
- Cream: 100 g, 170 m (186 yd)
- Forest green: 50 g, 85 m (93 yd)
- Gold: 10 g, 17 m (19 yd)
These amounts include an extra margin of about 20%.
Tools:
- 3.75 mm (US F-5) hook
- Tapestry needle
- 6 locking stitch markers
- Scissors
- Rustproof pins and a blocking mat
- A small box about 4.75 in (12.1 cm) square, to shape the holder
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- sc2tog – single crochet 2 together
- BLO – back loop only
- MR – magic ring
- sp – space
- st(s) – stitch(es)
- rev sc – reverse single crochet
Reverse single crochet (crab stitch): Work from left to right (if you’re right-handed). Insert the hook in the next st to the right, yo, pull up a loop, yo, and pull through both loops. This makes the twisted rope edge.
Gauge and Checkpoints
Gauge: 16 sc and 16 rows = 3 in (7.6 cm). At this gauge, each sc round of the square adds 0.375 in (1.0 cm) to the total width.
Make one full coaster through Round 10 before you start the rest of the set.
- After Round 4: 1.5 in (3.8 cm) across
- After Round 8: 3.0 in (7.6 cm) across
- After Round 10: 3.75 in (9.5 cm) across
- After border: 4.5 in (11.4 cm) across
Measure side to side through the middle, not corner to corner. If your square is too big, go down 0.25 mm in hook size. If it’s too small, go up 0.25 mm. Cotton barely stretches when blocked, so fix the gauge with your hook.

Coaster Base (Make 4, Cream)
Join each round with a sl st to the first sc. The ch 1 at the start of a round doesn’t count as a stitch, and neither do the ch-1 corner spaces.
Round 1: MR, ch 1, (2 sc, ch 1) 4 times, sl st to first sc. (8 sc; 2 per side)
Round 2: Ch 1, sc in each sc to corner, (sc, ch 1, sc) in ch-1 sp; repeat from * 3 more times, sl st to first sc. (16 sc; 4 per side)*
Rounds 3–9: Repeat Round 2. Each round has 2 more sc per side than the round before.
- Round 3: 24 sc (6 per side)
- Round 4: 32 sc (8 per side); checkpoint 1.5 in (3.8 cm)
- Round 5: 40 sc (10 per side)
- Round 6: 48 sc (12 per side)
- Round 7: 56 sc (14 per side)
- Round 8: 64 sc (16 per side); checkpoint 3.0 in (7.6 cm)
- Round 9: 72 sc (18 per side)
Round 10 (rounding round): Ch 1, sc in each sc to corner, 2 sc in ch-1 sp (no chain); repeat from * 3 more times, sl st to first sc. Fasten off. (72 + 8 = 80 sc: 18 per side plus 2 corner sts at each of the 4 corners)*
Leaving out the corner chain flattens each point into a curve. Checkpoint: 3.75 in (9.5 cm).
Large Tree Appliqué (Make 4, Green)
Worked flat from the bottom tier up. The ch 1 at the start of a row doesn’t count as a stitch.
Row 1: Ch 13, sc in 2nd ch from hook and each ch across, turn. (12)
Row 2: Ch 1, sc2tog, sc 8, sc2tog, turn. (10)
Row 3: Ch 1, sc2tog, sc 6, sc2tog, turn. (8)
Row 4: Ch 1, 2 sc in first st, sc 6, 2 sc in last st, turn. (10)
Row 5: Ch 1, sc2tog, sc 6, sc2tog, turn. (8)
Row 6: Ch 1, sc2tog, sc 4, sc2tog, turn. (6)
Row 7: Ch 1, 2 sc in first st, sc 4, 2 sc in last st, turn. (8)
Row 8: Ch 1, sc2tog, sc 4, sc2tog, turn. (6)
Row 9: Ch 1, sc2tog, sc 2, sc2tog, turn. (4)
Row 10: Ch 1, sc2tog twice, turn. (2)
Row 11: Ch 1, sc2tog. Fasten off. (1)
The increases in Rows 4 and 7 create the stepped, jagged outline of the tiers.
Trunk: Turn the tree upside down. Join green in the 6th unused foundation loop of Row 1. Ch 1, sc in the same loop and in the 7th loop, turn. (2) Ch 1, sc 2. Fasten off, leaving a 12 in (30.5 cm) tail.
Size: 2.25 in (5.7 cm) wide and about 2.4 in (6.1 cm) tall, including the trunk.
Holder (Make 1, Cream)
Base, Rounds 1–13: Work Coaster Base Rounds 1–9, then repeat Round 2 four more times.
- Round 10: 80 sc (20 per side)
- Round 11: 88 sc (22 per side)
- Round 12: 96 sc (24 per side)
- Round 13: 104 sc (26 per side); checkpoint 4.875 in (12.4 cm)
Don’t work the rounding round.
Round 14 (wall turn, BLO): Ch 1, sc in BLO of each sc to corner, 1 sc in ch-1 sp; repeat from * 3 more times, sl st to first sc. (104 + 4 = 108 sc: 26 per side plus 1 corner st at each of the 4 corners)*
Working in the BLO leaves a ridge that folds the wall up sharply.
Rounds 15–21: Ch 1, sc in each st around, sl st to first sc. (108) Fasten off. The wall is now 8 rounds, or 1.5 in (3.8 cm), tall.
Mark the notches: Pick two opposite walls to be the front and back. On the front wall, count 7 sts in from the corner st at each end. The 12 sts left in the middle are the front notch; mark both ends of it. Repeat on the back wall. You now have two notches of 12 sts and two arms of 42 sts each (7 + 1 corner + 26 + 1 corner + 7). Check: 12 + 12 + 42 + 42 = 108.
Arm Rows 22–29: Join cream in the first st after a notch. Ch 1, sc in the same st and in each of the next 41 sts, turn. (42) Work 7 more rows of ch 1, sc 42, turn. Fasten off. Repeat for the second arm.
Each notch is now 2.25 in (5.7 cm) wide and 1.5 in (3.8 cm) deep. The total wall height is 16 rows, or 3.0 in (7.6 cm).
Mini Tree Appliqué (Make 2, Green)
Row 1: Ch 9, sc in 2nd ch from hook and each ch across, turn. (8)
Row 2: Ch 1, sc2tog, sc 4, sc2tog, turn. (6)
Row 3: Ch 1, sc2tog, sc 2, sc2tog, turn. (4)
Row 4: Ch 1, 2 sc in first st, sc 2, 2 sc in last st, turn. (6)
Row 5: Ch 1, sc2tog, sc 2, sc2tog, turn. (4)
Row 6: Ch 1, sc2tog twice, turn. (2)
Row 7: Ch 1, sc2tog. Fasten off. (1)
Trunk: Join in the 4th foundation loop. Work the trunk as for the large tree, using the 4th and 5th loops.
Size: 1.5 in (3.8 cm) wide and about 1.7 in (4.3 cm) tall.
Make All Pieces
- Cream: 4 coaster bases (Rounds 1–10) and 1 holder
- Green: 4 large trees, 2 mini trees, 4 coaster borders and 1 holder rim
- Gold: 12 coaster stars and 2 holder stars
Holder layout, top view (numbers are stitches along the front and back walls):
BACK [ notch 12 ]
+----7----+----------+----7----+
| |
SIDE mini tree mini tree SIDE
| |
+----7----+----------+----7----+
FRONT [ notch 12 ]
Joining
No pieces in this set are seamed to each other. In this pattern, joining means attaching the appliqués and adding the embroidery.
Large trees: Center a tree on each coaster, with the tip 0.75 in (1.9 cm) below the top edge of Round 10, and pin it in place. With the trunk tail, whipstitch around the tree, one stitch per edge stitch or row end. Catch only the front loops of the cream stitches so nothing shows on the back.
Mini trees: Center one tree on each plain side wall, with the trunk 0.5 in (1.3 cm) above the base ridge. Sew it on the same way. Keep one hand inside the box so you don’t stitch into the opposite wall.
Stars: With gold, embroider each star as three straight stitches crossing at the center, which makes six points. Make a large star 0.5 in (1.3 cm) across just above each tree tip. On the coasters, add two small stars 0.375 in (1.0 cm) across, one in each upper corner beside the tree.
Tension: Pull each sewing stitch just snug. If the cream fabric puckers, loosen that stitch.
Checkpoint: Each coaster should still lie flat and measure 3.75 in (9.5 cm).
Border
Border gauge: Same as the body: 16 sc = 3 in (7.6 cm).
Coaster Border (Green)
Round 11: Join green in any st. Ch 1, sc in each of the 18 side sts, 2 sc in each of the 2 corner sts; repeat from * 3 more times, sl st to first sc. (80 + 8 = 88 sc: 18 per side plus 4 sts at each corner)*
Round 12: Ch 1, rev sc in each st around, sl st to first st. Fasten off. (88)
Why it works: Round 10 has 80 sts (4 × 18 side sts + 4 × 2 corner sts). Round 11 grows only at the corners, so the sides stay straight and the corners keep curving. At 16 sts per 3 in, 88 sts measure about 16.5 in (41.9 cm). That is close to the perimeter of a 4.5 in (11.4 cm) square with rounded corners, so the edge lies flat without ruffling or cupping. The two rounds add 0.375 in (1.0 cm) per side: 3.75 + 0.75 = 4.5 in.
Holder Rim (Green)
Round 1: Join green at the top of an arm, next to a notch. Ch 1, sc 42 across the top of the arm. Work 8 sc down the side of the notch (1 per row end), 12 sc in the unused notch sts of Round 21, and 8 sc up the other side. Repeat for the second arm and notch. Sl st to first sc. (2 × (42 + 8 + 12 + 8) = 140 sc)
Round 2: Ch 1, rev sc in each st around, sl st to join. Fasten off. (140)
Why it works: At 16 rows per 3 in, one sc per row end matches the stitch gauge, so the notch sides don’t flare or pull in. The rim adds 0.375 in (1.0 cm), for a total height of 3.375 in (8.6 cm).
Final Blocking
- Weave in all ends through stitches of the same color.
- Soak the coasters in cool water for 10 minutes, then press out the water with a towel.
- Pin each coaster to 4.5 in (11.4 cm) square, rounding the corners by eye.
- Dampen the holder and slip it over a box about 4.75 in (12.1 cm) square. Push the base ridge flat.
- Pinch the notch curves into a smooth U.
- Let everything dry completely, about 24 hours.
Final Quality-Control Checklist
- Each coaster measures 4.5 in (11.4 cm) and lies flat
- Each coaster border has 88 sts, with no gaps at the corners
- The trees are centered, and the sewing doesn’t show on the back
- The three stars on each coaster are even in size
- The holder walls stand upright at 3.0 in (7.6 cm) before the rim
- Both notches are 12 sts wide and centered
- The rim has 140 sts and lies smooth through the notches
- All four coasters slide in and out easily
Troubleshooting
- Coaster cups: You’re missing corner increases or your tension is tight. Check the Round 9 count (72) and go up a hook size.
- Coaster ruffles: There are extra sts at the corners. Recount Round 10 (80).
- Corners are pointed after the border: You chained at a corner in Round 10. Rework the corner with 2 sc and no chain.
- Walls lean out: Round 14 wasn’t worked in the BLO, or you used a looser hook. Rework Round 14 in the BLO.
- Notch is off-center: Recount 7 sts from each corner before you start the arms.
- Reverse sc twists unevenly: Keep the loops relaxed and insert the hook from front to back every time.
Care
Hand wash in cool water with mild soap and lay flat to dry. Reshape the holder over its box while it’s damp.

Final Notes
All the measurements come from one gauge: 16 sc = 3 in (7.6 cm), with each round adding 0.375 in (1.0 cm). The coaster measures 1.5 in (3.8 cm) at Round 4, 3.0 in (7.6 cm) at Round 8 and 3.75 in (9.5 cm) at Round 10, and the border brings it to 4.5 in (11.4 cm). The holder base reaches 4.875 in (12.4 cm) at Round 13, the walls rise 3.0 in (7.6 cm), and the rim brings the height to 3.375 in (8.6 cm). Hit each checkpoint and the coasters will drop neatly into their box.
Happy crocheting!