This wall hanging is made of 36 small lace Christmas trees in deep forest green and soft cream. The trees are strung into six vertical strands, with natural wooden beads between them and a chunky tassel at the bottom of each strand. A plain wooden dowel holds everything. The style is Scandinavian and minimal.
Each tree has three stacked tiers. Each tier flares out at both sides into a rounded, scalloped tip and has a row of small eyelets. A square trunk sits at the bottom and a small loop sits at the top. One round of single crochet outlines the tree, so the edges look crisp.
Each tree measures 4.5 in (11.4 cm) wide by 5 in (12.7 cm) tall. The finished hanging is 32 in (81.3 cm) wide across the trees and 40.5 in (102.9 cm) long from the dowel to the tassel tips. This pattern uses US crochet terms.
You work each tree top-down in rows, starting from a tiny ring, then add the trunk and one border round. Then you link the trees into strands with beads, add the tassels, and tie the strands to the dowel.
Finished Size and Construction
- Finished hanging: 32 in (81.3 cm) wide x 40.5 in (102.9 cm) long, on a 36 in (91.4 cm) dowel
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: DK (#3) cotton
- Hook: 3.5 mm (US E-4)
- Number of pieces: 36 tree motifs (18 green, 18 cream), plus 6 tassels
- Layout: 6 strands of 6 trees, with green and cream strands alternating
- Piece size: 4.5 in (11.4 cm) wide x 5 in (12.7 cm) tall
- Size before border: 4.2 in (10.7 cm) wide x 4.8 in (12.2 cm) tall
- Border depth: about 0.15 in (0.4 cm) at the sides and 0.1 in (0.3 cm) at the tip and trunk
Materials
Choose a smooth, firm DK cotton or cotton blend. Cotton holds the scalloped tips and hangs flat. Avoid fuzzy or very stretchy yarns: the eyelets close up and the trees droop.
- Forest green: 175 g (about 385 m) for 18 trees, 3 tassels, and the links
- Cream: 175 g (about 385 m) for 18 trees, 3 tassels, and the links
Both amounts include a margin of about 15% for gauge differences, the swatch, and yarn tails.
Tools:
– 3.5 mm (US E-4) crochet hook
– 42 round wooden beads, 0.5 in (1.3 cm) across, with holes big enough for a doubled strand of yarn
– Wooden dowel, 36 in (91.4 cm) long and 0.75 in (1.9 cm) thick
– 2 wall brackets or hooks
– Tapestry needle
– Stiff card, 5.5 in (14.0 cm) tall, for the tassels
– Scissors, rust-proof pins, blocking mat, and a spray bottle or steamer
– Measuring tape
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- dc – double crochet
- st(s) – stitch(es)
- sp – space
- tch – turning chain
- RS – right side
Notes: The ch 3 at the start of a row counts as 1 dc. “Same st” means the stitch at the base of that ch 3.
Special stitch – Flare row: On a flare row you work 3 dc into each end stitch. This makes the rounded scalloped tip of a tier.
Gauge and Checkpoints
Gauge: 20 dc and 10 dc rows = 4 in (10.2 cm). For single crochet, 5 sc = 1 in (2.5 cm), and 1 sc row is about 0.2 in (0.5 cm) tall.
Make one complete tree, border included, before you make the rest. It shows your true gauge and how much yarn one tree uses. Check it at each stage:
- After Row 4: 13 dc, about 2.6 in (6.6 cm) wide and 1.6 in (4.1 cm) tall
- After Row 7: 17 dc, about 3.4 in (8.6 cm) wide and 2.8 in (7.1 cm) tall
- After Row 10: 21 dc, about 4.2 in (10.7 cm) wide and 4 in (10.2 cm) tall
- After the trunk: 4.8 in (12.2 cm) tall overall, with the trunk 1 in (2.5 cm) wide
- After the border: 4.5 in (11.4 cm) x 5 in (12.7 cm)
Too big? Change to a 3.25 mm hook. Too small? Change to a 3.75 mm hook. A tree that is off by 0.25 in (0.6 cm) makes each strand 1.5 in (3.8 cm) off, so fix your gauge first.

Tree Motif
Work in rows from the top down. Turn at the end of every row.
Tier 1 (Top)
Row 1 (RS): Ch 4 and sl st in the first ch to form a ring. Ch 3, 4 dc in ring. (5 dc)
Row 2: Ch 3, dc in same st, ch 1, skip next dc, dc in next dc, ch 1, skip next dc, 2 dc in top of tch. (5 dc + 2 ch-1 sps = 7 sts)
Row 3: Ch 3, dc in same st, dc in each dc and ch-1 sp across to tch (5 sts), 2 dc in top of tch. (9 dc)
Row 4 (flare row): Ch 3, 2 dc in same st, dc in each of next 7 dc, 3 dc in top of tch. (13 dc)
Tier 2 (Middle)
Row 5: Sl st in each of the first 3 sts. Ch 3, dc in same st, [ch 1, skip next dc, dc in next dc] 3 times, ch 1, skip next dc, 2 dc in next dc. Leave the last 2 sts unworked. (7 dc + 4 ch-1 sps = 11 sts)
Skipping 2 sts at each end leaves the Tier 1 flares hanging free. That is what gives the stacked-tier shape.
Row 6: Ch 3, dc in same st, dc in each dc and ch-1 sp across to tch (9 sts), 2 dc in top of tch. (13 dc)
Row 7 (flare row): Ch 3, 2 dc in same st, dc in each of next 11 dc, 3 dc in top of tch. (17 dc)
Tier 3 (Bottom)
Row 8: Sl st in each of the first 3 sts. Ch 3, dc in same st, [ch 1, skip next dc, dc in next dc] 5 times, ch 1, skip next dc, 2 dc in next dc. Leave the last 2 sts unworked. (9 dc + 6 ch-1 sps = 15 sts)
Row 9: Ch 3, dc in same st, dc in each dc and ch-1 sp across to tch (13 sts), 2 dc in top of tch. (17 dc)
Row 10 (flare row): Ch 3, 2 dc in same st, dc in each of next 15 dc, 3 dc in top of tch. (21 dc) Fasten off.
Trunk
Row 1: Skip the first 8 sts of Row 10 and join yarn in the 9th st. Ch 1, sc in the same st and in each of the next 4 sts. (5 sc) This leaves 8 sts free on each side.
Rows 2–4: Ch 1, turn, sc in each st across. (5 sc) Fasten off.
The tree now measures 4.2 in (10.7 cm) x 4.8 in (12.2 cm).
Make All Pieces
Make 18 trees in forest green and 18 in cream. Work the border round (see Border) on every tree before you do any joining. Make 3 tassels in each color (see Joining).
Layout grid (G = green, C = cream; strands run left to right, trees top to bottom):
S1 S2 S3 S4 S5 S6
Tree 1 G C G C G C
Tree 2 G C G C G C
Tree 3 G C G C G C
Tree 4 G C G C G C
Tree 5 G C G C G C
Tree 6 G C G C G C
Tassel G C G C G C
Joining
The trees are joined with yarn links, and each link passes through a bead. Each strand has 7 beads: one above the top tree, five between trees, and one above the tassel.
Tree-to-tree link: Thread 12 in (30.5 cm) of matching yarn onto a tapestry needle. Pass it through the center border sc at the bottom of the upper tree’s trunk. Then go down through a bead and through the ch-4 tip loop of the lower tree. Come back up through the bead and tie a square knot. Tuck the knot into the bead hole and weave in the tails.
Stitch logic: Always link center to center, from the middle trunk sc to the tip loop directly below it. That keeps each strand on one straight vertical line.
Tension: Make each link exactly as long as the bead, 0.5 in (1.3 cm), so the bead sits snugly with no gap. If a link is too tight, the trees tilt. If it is too loose, they twist.
Tassels: Wrap yarn 40 times around the 5.5 in (14.0 cm) card. Slip a 12 in (30.5 cm) tie under the loops at the top and knot it tightly, then cut the loops at the bottom. Wrap and knot a strand around the tassel 0.75 in (1.9 cm) below the top. Trim the tassel to 5 in (12.7 cm). Pass the tie ends up through the bottom bead and into the center trunk sc of the last tree, then knot.
Hanging loop: Thread 18 in (45.7 cm) of yarn through the top tree’s tip loop and up through the top bead. Tie it over the dowel with a 2 in (5.1 cm) drop from the dowel to the bead.
Size checkpoint:
– One strand, top bead to bottom bead: (7 beads x 0.5 in) + (6 trees x 5 in) = 33.5 in (85.1 cm).
– Total length: 2 in (5.1 cm) drop + 33.5 in (85.1 cm) strand + 5 in (12.7 cm) tassel = 40.5 in (102.9 cm).
– Width: space the strands 5.5 in (14.0 cm) apart, center to center. (5 gaps x 5.5 in) + one 4.5 in tree = 32 in (81.3 cm).
Border
Border gauge: Work 2 sc into each dc row-end, 1 sc into each sc row-end, and 1 sc into each stitch top.
Border round (RS): Join yarn with a sl st around the foundation ring at the tip.
- Tip: Ch 1, (sc, ch 4, sc) around the ring, then 2 sc in the Row 1 row-end. (4 sc + ch-4 loop)
- Side 1 (36 sc):
- 2 sc in each row-end of Rows 2–4, 3 sc in the corner st of Row 4, then sc in the next free st. (10 sc)
- 2 sc in each row-end of Rows 5–7, 3 sc in the corner st of Row 7, then sc in the next free st. (10 sc)
- 2 sc in each row-end of Rows 8–10, 3 sc in the corner st of Row 10, then sc in each of the next 7 sts. (16 sc)
- Sc in each of the 4 trunk row-ends. (4 sc)
- Trunk bottom (9 sc): 3 sc in the first st, sc in the next 3 sts, 3 sc in the last st.
- Side 2 (36 sc): Mirror Side 1, working upward: 4 trunk row-ends, 7 sts of Row 10, 3-sc corner, Rows 10–8 row-ends, and so on up to Row 2.
- Finish: 2 sc in the Row 1 row-end. Sl st to the first sc and fasten off.
Total: 4 + 36 + 9 + 36 + 2 = 87 sc, plus the ch-4 loop.
Why the math works:
– Both sides have the same row-ends and free stitches: 2 per flare and 8 beside the trunk. So each side comes to 36 sc and the tree stays symmetrical.
– Two sc are 0.4 in (1.0 cm) wide, which matches the height of one dc row, so the edges lie flat.
– The 3-sc corners round each flare without cupping.
– The border takes the tree from 4.2 in (10.7 cm) to 4.5 in (11.4 cm) wide, and from 4.8 in (12.2 cm) to 5 in (12.7 cm) tall.
Final Blocking
- Weave in all ends, but don’t trim them close yet.
- Spray each tree until damp, or steam it from just above without touching.
- Pin it to 4.5 in (11.4 cm) x 5 in (12.7 cm).
- Pin each scalloped tip outward and slightly downward.
- Open each eyelet with a pin tip.
- Square up the trunk and straighten the tip loop.
- Let the trees dry completely, then trim the tails.
- After assembly, lightly steam any strand that twists.
Final Quality-Control Checklist
- Each tree measures 4.5 in (11.4 cm) x 5 in (12.7 cm), within 0.125 in (0.3 cm)
- Each tree has three tiers and six free scalloped tips
- The eyelets number 2, 4, and 6 from the top tier down
- The trunk is centered, with 8 free sts on each side
- The border has 87 sc plus the ch-4 loop
- Each strand measures 33.5 in (85.1 cm) from bead to bead
- The strands alternate colors and are 5.5 in (14.0 cm) apart
- The tassels are all trimmed to 5 in (12.7 cm)
Troubleshooting
- Tiers have no step between them: Skip exactly 2 sts at each end in Rows 5 and 8.
- Tips curl up: Work the 3-dc groups more loosely, and block the tips downward.
- Border ruffles: Use 2 sc per dc row-end, not 3.
- Border pulls in: Make sure every corner gets all 3 sc.
- Tree leans: Count 8 sts before you join the trunk.
- Strands hang at different lengths: Re-tie each hanging loop to a 2 in (5.1 cm) drop.
Care
Hand wash in cool water, press the water out in a towel, and dry flat, re-pinning the tips if needed. Keep the hanging out of strong sun so the green doesn’t fade.

Final Notes
The measurement chain:
– A gauge of 20 dc = 4 in (10.2 cm) gives 21 dc = 4.2 in (10.7 cm) at Row 10.
– The 87-sc border brings each tree to 4.5 in (11.4 cm) x 5 in (12.7 cm).
– Six trees and seven 0.5 in (1.3 cm) beads make a 33.5 in (85.1 cm) strand.
– Six strands at 5.5 in (14.0 cm) spacing fill 32 in (81.3 cm) on a 36 in (91.4 cm) dowel.
Check your first tree carefully, and the rest of the project will follow.
Happy crocheting!