This little tree ornament is made from six lacy wheel motifs stacked in a 3-2-1 pyramid. A crisp single crochet outline turns them into a triangle, and a small solid trunk and a twisted hanging loop finish it off. Each wheel has twelve treble spokes around a tiny center hole, so the tree looks like a cluster of snowflakes.
The sample uses one soft mint green mercerized cotton. Using one color keeps the look calm and Scandinavian, and the stitch texture does all the work. It also looks good in white, sage, or pale gold.
The pattern uses US crochet terms. The finished tree measures about 5.5 in (14.0 cm) per side, point to point. It is about 5.5 in (14.0 cm) tall from the top point to the bottom of the trunk. The hanging loop adds about 3 in (7.6 cm), so the ornament hangs about 8.5 in (21.6 cm) long overall.
Construction is simple. You make the first wheel, then join each of the next five wheels as you go on their last round. A two-round border pulls the cluster into a clean triangle. You work the trunk in rows off the bottom edge and crochet the loop from the top point.
Finished Size and Construction
- Finished size: about 5.5 in (14.0 cm) per side; 5.5 in (14.0 cm) tall including trunk
- Skill level: Easy-intermediate
- Terminology: US crochet terms
- Yarn weight: Sport (#2) mercerized cotton
- Hook: 3.25 mm (US D/3)
- Number of pieces: 6 wheel motifs, joined as you go into one ornament
- Layout: 3-2-1 pyramid (3 wheels at the bottom, 2 in the middle, 1 at the top)
- Piece size: each wheel 1.4 in (3.6 cm) across
- Size before border: about 4.2 in (10.7 cm) wide x 3.8 in (9.7 cm) tall
- Border depth: about 0.25 in (0.6 cm)
Materials
Choose a smooth, tightly twisted mercerized cotton or cotton blend. It shows the spokes clearly and holds a sharp point after blocking. Fuzzy or very soft yarns blur the wheels and are hard to block flat.
- Mint green, sport weight cotton: about 17 g / 50 m (55 yd)
This amount makes one ornament. The quantity includes a margin of about 30 percent for a gauge swatch and tails.
Tools:
- 3.25 mm (US D/3) crochet hook
- 6 locking stitch markers
- Tapestry needle
- Scissors
- Blocking mat and rust-proof pins
- Spray starch or a diluted fabric stiffener (optional)
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- sc – single crochet
- tr – treble crochet
- sp – space
- st(s) – stitch(es)
- yo – yarn over
- jsc – join single crochet (see below)
Join single crochet (jsc): Insert hook in the next st of the current wheel, yo and pull up a loop (2 loops on hook). Insert hook from front to back through the stated sc of the neighboring wheel, yo and draw through that sc and both loops on hook. One jsc counts as 1 sc of the current wheel. It adds no stitches to either wheel.
Gauge and Checkpoints
Gauge: 11 sc and 11 sc rows = 2 in (5.1 cm). Exact gauge matters here because an error in one wheel repeats in all six wheels and the border.
Make one wheel first and measure it before you start joining.
- After Wheel Round 1: about 1.1 in (2.8 cm) across, tip of spoke to tip of spoke.
- After Wheel Round 2: 1.4 in (3.6 cm) across, lying flat.
- After all six wheels are joined: about 4.2 in (10.7 cm) wide x 3.8 in (9.7 cm) tall.
- After Border Round 2: about 5.5 in (14.0 cm) per side.
If your wheel is 1.5 in (3.8 cm) or larger, go down half a hook size. If it is 1.3 in (3.3 cm) or smaller, go up half a size. If the wheel cups, your trebles are too short; pull each first loop up a little higher. If it ruffles, your sc round is too loose.

Wheel Motif
Every wheel uses the same two rounds. Only the joining is different.
Round 1: Make a magic ring. Ch 5 (counts as tr and ch 1), (tr, ch 1) 11 times in the ring. Join with sl st to 4th ch of beginning ch-5. Pull the ring closed, leaving a small center hole. (12 tr, 12 ch-1 sps)
Round 2: Ch 1, sc in same st as join, sc in next ch-1 sp, *sc in next tr, sc in next ch-1 sp; repeat from * 10 more times. Join with sl st to first sc. (12 sc worked in tr + 12 sc worked in ch-1 sps = 24 sc)
Fasten off and weave in the center tail now. Leave the final tail for later.
Join points: Number the Round 2 stitches 1 to 24, starting with the first sc. Sc 1, 5, 9, 13, 17, and 21 are the six join points, spaced 60 degrees apart. Hold the wheel with sc 1 pointing right (3 o’clock). Working counterclockwise as seen from the front:
- sc 1 = right (R)
- sc 5 = upper right (UR)
- sc 9 = upper left (UL)
- sc 13 = left (L)
- sc 17 = lower left (LL)
- sc 21 = lower right (LR)
The stitches halfway between join points are where the border attaches. Sc 19 points straight down, sc 23 points lower right, and sc 15 points lower left.
On finished wheels, place markers in sc 1, 5, and 9 so you can find them easily when joining.
Make All Pieces
Make 6 wheels in mint green. Make Wheel 1 complete, then join Wheels 2 to 6 as you go on Round 2.
Layout grid, as seen from the front:
[6]
[4] [5]
[1] [2] [3]
Lay each finished wheel right side up with sc 1 pointing right. Use this same orientation for every wheel so the numbering always matches.
Joining
You join each new wheel on its Round 2. Work Round 2 as written, but replace each listed sc with a jsc into the listed sc of the neighboring wheel. All other stitches are normal sc. Each wheel still has 24 sc.
- Wheel 1: No joins.
- Wheel 2: sc 13 (L) jsc to Wheel 1 sc 1 (R).
- Wheel 3: sc 13 (L) jsc to Wheel 2 sc 1 (R).
- Wheel 4: sc 17 (LL) jsc to Wheel 1 sc 5 (UR); sc 21 (LR) jsc to Wheel 2 sc 9 (UL).
- Wheel 5: sc 13 (L) jsc to Wheel 4 sc 1 (R); sc 17 (LL) jsc to Wheel 2 sc 5 (UR); sc 21 (LR) jsc to Wheel 3 sc 9 (UL).
- Wheel 6: sc 17 (LL) jsc to Wheel 4 sc 5 (UR); sc 21 (LR) jsc to Wheel 5 sc 9 (UL).
That makes 9 joins in total, one at each point where two wheels touch.
Stitch-to-stitch logic: Each join sits on a straight line between two wheel centers. Join points are exactly 4 sc apart (60 degrees), so the wheels pack together in an even triangle. They meet cleanly at each contact point with no gaps or overlaps.
Tension: Keep each jsc the same height as a regular sc. A tight jsc pulls the wheels together and puckers the cluster. A loose one leaves a visible gap. Lay the work flat after each new wheel to check.
Size checkpoint: The joined cluster measures about 4.2 in (10.7 cm) across the bottom row. It measures 3.8 in (9.7 cm) from the bottom of Wheel 2 to the top of Wheel 6. Weave in all wheel tails before you start the border.
Border
Round 1 straightens the three sides with chain bridges. Round 2 covers everything with single crochet. The border uses the main gauge: 11 sc = 2 in (5.1 cm).
Border Round 1: With right side facing, join yarn in sc 18 of Wheel 1.
- Bottom side: Ch 1, sc in sc 18, 19, and 20 of Wheel 1. Ch 6, sc in sc 18 to 20 of Wheel 2. Ch 6, sc in sc 18 to 20 of Wheel 3.
- Bottom right corner: Ch 9.
- Right side: Sc in sc 22 to 24 of Wheel 3. Ch 6, sc in sc 22 to 24 of Wheel 5. Ch 6, sc in sc 22 to 24 of Wheel 6.
- Top corner: Ch 9.
- Left side: Sc in sc 14 to 16 of Wheel 6. Ch 6, sc in sc 14 to 16 of Wheel 4. Ch 6, sc in sc 14 to 16 of Wheel 1.
- Bottom left corner: Ch 9. Join with sl st to first sc.
Count: 9 sc per side (3 wheels x 3 sc), 2 ch-6 bridges per side, and 3 ch-9 corner loops. (27 sc, 6 ch-6 sps, 3 ch-9 sps)
Border Round 2: Ch 1. Work 1 sc in each sc, 6 sc in each ch-6 sp, and (4 sc, ch 2, 4 sc) in each ch-9 sp. Join with sl st to first sc.
Per side, from corner ch-2 to corner ch-2: 4 + 3 + 6 + 3 + 6 + 3 + 4 = 29 sc.
Total: 27 sc worked into sc + 60 sc worked into spaces (36 in ch-6 sps + 24 in ch-9 sps) = 87 sc, plus 3 ch-2 corner sps. Fasten off.
Why the math works: Each side touches exactly three wheels. Each wheel gives 3 sc, so each side starts with 3 x 3 = 9 sc. The bridges add 12 sc and the corner halves add 8 sc, for 29 sc. At 5.5 sc per inch, 29 sc is about 5.3 in (13.5 cm). The ch-2 corner tips bring each side to about 5.5 in (14.0 cm). The ch-9 corners are a little long on purpose, so you can pin each point sharp without pulling.
Trunk
Number the 29 sc on the bottom side from left to right. Stitch 15 is the center (the middle sc of Wheel 2).
Row 1: With right side facing, join yarn in st 13. Ch 1, sc in st 13 and next 4 sts. Turn. (5 sc)
Rows 2–4: Ch 1, sc in each st across. Turn. (5 sc)
Fasten off. The trunk is about 0.9 in (2.3 cm) wide and 0.75 in (1.9 cm) tall.
Hanging Loop
Cord: With right side facing, join yarn with sl st in the top corner ch-2 sp. Ch 36. Sl st in back bump of 2nd ch from hook and each ch across. (35 sl st)
Sl st again in the top ch-2 sp to fold the cord into a loop. Fasten off. The cord is about 6 in (15.2 cm) long, which makes a loop about 3 in (7.6 cm) tall.
Wrapped knot: Cut a 12 in (30.5 cm) length of yarn. Wrap it tightly 5 times around both legs of the loop, just above the tree point. Tie it, thread the ends on a needle, and hide them inside the wraps.
Final Blocking
- Weave in all remaining ends along the border so they don’t show through the lace.
- Wet the ornament in cool water and press out the excess water in a towel.
- Lay it right side up on a blocking mat.
- Pin the three corner points first, 5.5 in (14.0 cm) apart.
- Pin the center of each wheel so the spokes spread evenly and each wheel sits round.
- Pin the trunk straight and square.
- For a firm ornament, spray lightly with starch or brush on diluted stiffener.
- Let it dry completely, at least 12 hours, before unpinning.
Final Quality-Control Checklist
- Each wheel has 12 spokes and 24 sc.
- All 9 joins are in place and none are twisted.
- Each wheel measures 1.4 in (3.6 cm) across.
- Border Round 2 has 29 sc per side and 87 sc in total.
- All three corners are sharp and the sides are straight.
- The trunk is centered under Wheel 2.
- The loop is about 3 in (7.6 cm) tall and the wrap is snug.
- No tails show on the front.
Troubleshooting
Wheels cup or curl: Your trebles are too short or Round 2 is too tight. Loosen the sc round or go up half a hook size.
Cluster won’t lie flat: A jsc is probably in the wrong sc. Count 4 sc between join points and redo the wrong join.
Sides bow inward: Your bridges are too tight. Work ch 7 bridges in Round 1 and still work 6 sc into each.
Sides ripple: Your chains are too loose. Work ch 5 bridges in Round 1 and still work 6 sc into each, so the count stays at 29.
Trunk off-center: Recount the bottom side. The trunk starts in st 13 and ends in st 17.
Loop twists: Block the cord straight, or work the cord with a slightly larger hook.
Care
Hand wash in cool water with mild soap, press flat, and block again if needed. Store flat between holiday seasons to keep the points sharp.

Final Notes
Each measurement in this ornament builds on the one before it. Each wheel is 1.4 in (3.6 cm) across. Six wheels joined in a 3-2-1 pyramid make a cluster 4.2 in (10.7 cm) wide. Border Round 2 gives 29 sc per side and about 5.5 in (14.0 cm) per side. The trunk adds 0.75 in (1.9 cm), and the loop adds 3 in (7.6 cm). If your first wheel measures right, the rest will fit.
Happy crocheting!