This holder hangs from a wooden dowel and keeps three spare rolls in sight. Each of its three round pockets has a small snowman on the front, so it works as winter bathroom decor. The fabric is firm, heathered light-blue single crochet with crisp cream trim.
The palette is light blue, cream and medium blue, plus small touches of orange and black for the faces. The style is soft and cozy. The pockets look like little snow-dusted tubs, and wooden buttons and a wooden dowel finish the look. All terms are US crochet terms.
The finished holder measures 17 in (43.2 cm) wide and 9 in (22.9 cm) tall, not counting the hanging tabs. Each pocket is 4.75 in (12.1 cm) across and 5.5 in (14.0 cm) tall, which fits a standard roll.
The construction is simple. You crochet the back panel flat in rows and add a two-round cream border. Each pocket is worked in the round from a flat circle base. The snowmen are small appliqués that you sew on before assembly. Last, you sew the pockets and tabs to the panel and button the holder onto the dowel.
Finished Size and Construction
- Finished size: 17 in x 9 in (43.2 cm x 22.9 cm), not including tabs
- Skill level: Intermediate
- Terminology: US
- Yarn weight: Worsted (#4)
- Hook: 4.0 mm (G-6)
- Number of pieces: 1 back panel, 3 pockets, 3 tabs, plus 3 snowman appliqué sets
- Layout: 3 pockets side by side across the lower panel
- Pocket size: 4.75 in (12.1 cm) across x 5.5 in (14.0 cm) tall
- Panel size before border: 16 in x 8 in (40.6 cm x 20.3 cm)
- Border depth: 0.5 in (1.3 cm)
Materials
Choose a smooth worsted acrylic or cotton blend. A heathered light blue gives the frosty look in the photo. Cotton blends make a stiffer pocket, and acrylic is easier to wash.
- Light blue (main): 160 g, about 300 m
- Cream: 30 g, about 55 m
- Medium blue: 15 g, about 28 m
- Orange: 2 g, about 4 m
- Black: 2 g, about 4 m
All quantities include a margin of about 15%.
Tools:
– 4.0 mm (G-6) crochet hook
– Tapestry needle
– Stitch markers
– 3 wooden buttons, 0.75 in (1.9 cm)
– Wooden dowel, 20 in (50.8 cm) long and 0.75 in (1.9 cm) thick, with knob ends
– Sewing pins
– Optional: plastic canvas, 15.5 in x 7.5 in (39.4 cm x 19.1 cm), to stiffen the panel
Abbreviations (US Terms)
- ch: chain
- sc: single crochet
- inc: 2 sc in the same stitch
- sc2tog: single crochet 2 together
- sl st: slip stitch
- BLO: back loop only
- MR: magic ring
- st(s): stitch(es)
- rnd: round
Special stitch: reverse single crochet (rev sc). This is single crochet worked from left to right. Insert the hook into the next stitch to the right, yarn over and pull up a loop, then yarn over and pull through both loops. It makes a corded, rope-like edge.
Gauge and Checkpoints
Gauge: 16 sc and 16 rows = 4 in (10.2 cm). This is firm single crochet, which keeps the pockets from sagging.
Make one pocket first and use it as your gauge test.
- After Rnd 10 of the base: the circle should be 4.75 in (12.1 cm) across.
- After Rnd 30: the pocket wall should be 5 in (12.7 cm) tall, measured from the BLO ridge.
- Panel after Row 16: 16 in (40.6 cm) wide and 4 in (10.2 cm) tall.
If your piece comes out too big, drop to a 3.75 mm hook. If it comes out too small, go up to a 4.5 mm hook. Square gauge (equal stitches and rows per inch) matters here, because the border places 1 sc in every row end.

Pocket (Make 3)
Use light blue. Work in continuous spiral rounds and move a marker up to the first stitch of each round.
Base:
– Rnd 1: MR, 6 sc in ring. (6)
– Rnd 2: inc in each st around. (12)
– Rnd 3: (sc 1, inc) 6 times. (18)
– Rnd 4: (sc 2, inc) 6 times. (24)
– Rnd 5: (sc 3, inc) 6 times. (30)
– Rnd 6: (sc 4, inc) 6 times. (36)
– Rnd 7: (sc 5, inc) 6 times. (42)
– Rnd 8: (sc 6, inc) 6 times. (48)
– Rnd 9: (sc 7, inc) 6 times. (54)
– Rnd 10: (sc 8, inc) 6 times. (60)
Checkpoint: the base should be a flat circle 4.75 in (12.1 cm) across.
Walls:
– Rnd 11: sc in BLO in each st around. (60) The unused front loops form a ridge, so the wall turns up sharply.
– Rnds 12–30: sc in each st around. (60)
Checkpoint: the wall is 5 in (12.7 cm) tall, 20 rounds.
Rim:
– Rnd 31: Change to cream. Sc in each st around. (60) Join with a sl st to the first sc.
– Rnd 32: Ch 1. Work rev sc in each st around: 60 worked 1 per existing stitch + 0 added = 60. Join, fasten off and weave in the end.
The finished pocket is 5.5 in (14.0 cm) tall.
Snowman Appliqué (Make 3 Sets)
Leave a 10 in (25.4 cm) tail on every piece for sewing.
Body (cream):
– Rnd 1: MR, 6 sc. (6)
– Rnd 2: inc in each st around. (12)
– Rnd 3: (sc 1, inc) 6 times. (18)
– Rnd 4: (sc 2, inc) 6 times. (24)
Sl st to join and fasten off. The body is 2 in (5.1 cm) across.
Head (cream): Work Rnds 1–3 as for the body. (18) It is 1.5 in (3.8 cm) across.
Hat (medium blue):
– Row 1 (cuff): Ch 8. Sc in the 2nd ch from the hook and across. (7) Turn.
– Row 2: Ch 1, sc2tog, sc 3, sc2tog. (5) Turn.
– Row 3: Ch 1, sc 5. (5) Turn.
– Row 4: Ch 1, sc2tog, sc 1, sc2tog. (3) Fasten off.
The hat is 1.75 in (4.4 cm) wide and 1 in (2.5 cm) tall. Add a line of sl sts across Row 1 to give the cuff some definition.
Scarf (medium blue):
– Band: Ch 8. Sc in the 2nd ch from the hook and across. (7) The band is 1.75 in (4.4 cm) long.
– Tail: Ch 6. Sc in the 2nd ch from the hook and across. (5) The tail is 1.25 in (3.2 cm) long.
Placement: Center the snowman on the pocket front, directly opposite where the pocket will meet the panel.
- Pin the body with its lower edge on Rnd 13.
- Pin the head so it overlaps the body by 0.25 in (0.6 cm). The stacked circles measure 3.25 in (8.3 cm) tall.
- Pin the hat over the top 0.5 in (1.3 cm) of the head. The top of the hat should reach Rnd 27, so the full snowman is 3.75 in (9.5 cm) tall.
- Lay the scarf band across the join between head and body. Let the tail hang down on one side.
- Whipstitch each piece around its edge.
Embroidery:
– Eyes: 2 black French knots.
– Nose: 3 orange straight stitches that taper into a carrot shape, pointing sideways.
– Buttons: 2–3 medium-blue French knots down the body.
– Snowflakes: One cream snowflake on each side of the head, 0.75 in (1.9 cm) across, made of 3 crossed straight stitches.
Back Panel
Use light blue.
- Row 1: Ch 65. Sc in the 2nd ch from the hook and across. (64) Turn.
- Rows 2–32: Ch 1, sc in each st across. (64) Turn.
Checkpoint: the panel measures 16 in x 8 in (40.6 cm x 20.3 cm). Do not fasten off; you work the border next.
Hanging Tabs (Make 3)
Use light blue.
- Row 1: Ch 7. Sc in the 2nd ch from the hook and across. (6) Turn.
- Rows 2–17: Ch 1, sc 6. (6) Turn.
- Row 18: Ch 1, sc 2, ch 2, skip 2, sc 2. (4 sc + ch-2 space) Turn.
- Row 19: Ch 1, sc 2, 2 sc in the ch-2 space, sc 2. (6) Turn.
- Row 20: Ch 1, sc 6. (6) Fasten off.
Each tab is 1.5 in x 5 in (3.8 cm x 12.7 cm).
Make All Pieces
Light blue: 1 panel, 3 pockets and 3 tabs.
Cream: 3 pocket rims, the panel border, 3 bodies and 3 heads.
Medium blue: 3 hats and 3 scarves.
Here is how the pieces fit together, seen from the front:
[Tab] [Tab] [Tab]
+-----------------------------------------+
| Back panel |
| +--------+ +--------+ +--------+ |
| |Pocket 1| |Pocket 2| |Pocket 3| |
| +--------+ +--------+ +--------+ |
+-----------------------------------------+
Border
Border gauge: the border uses the same gauge, 16 sts = 4 in (10.2 cm). Use cream.
Rnd 1: Join cream in the last st of Row 32.
- Ch 1. Work 3 sc in the first st of the top edge, sc in each of the next 62 sts, then 3 sc in the last st.
- Down the side, sc in each row end of Rows 31 through 2. (30)
- Along the foundation chain, work 3 sc in the first ch, sc in each of the next 62 ch, then 3 sc in the last ch.
- Up the other side, sc in each of 30 row ends.
- Sl st to the first sc.
Count: 188 sts worked 1 per existing stitch or row end, + 8 added at the corners = 196. Between corner groups, that is 62 sts on the top and bottom and 30 on each side.
Rnd 2: Ch 1. Sc in each st around, working 3 sc in the center sc of each corner group. Join.
Count: 196 + 8 = 204. Between corner groups, that is 64 sts on the top and bottom and 32 on each side. Fasten off.
Why the math works: your gauge is square, so 1 sc per row end matches 1 sc per stitch, and the edge lies flat. Each border round adds 0.25 in (0.6 cm) on every side. The 2 extra sc at each corner per round keep the corners square. Two rounds turn 16 in x 8 in into 17 in x 9 in (43.2 cm x 22.9 cm).
Joining
Method: whipstitch with light blue through both loops of the panel and the pocket wall.
Pocket positions: count stitches along Row 1 of the panel.
| Back seam lines | Center | |
|---|---|---|
| Left | sts 10 and 17 | 3.25 in (8.3 cm) from the panel’s left edge |
| Middle | sts 29 and 36 | the panel center |
| Right | sts 48 and 55 | mirrors the left pocket |
The centers are 4.75 in (12.1 cm) apart, exactly one pocket width, so the pockets touch without crowding. Each outer pocket sits 0.875 in (2.2 cm) in from the panel edge, or 1.375 in (3.5 cm) in from the outer edge of the border.
Stitch-to-stitch logic:
- Set each pocket’s base on the bottom border.
- Pocket rounds 11–32 line up with panel rows 1–22, 1 round to 1 row, because the round and row gauges match.
- Sew two vertical seams per pocket, joining one wall stitch to each panel row along each seam line.
- Tack the back edge of the base to the bottom border.
- Where neighboring pockets touch, tack them together across Rnds 14–28.
Tension: sew snugly but don’t pull. The pocket should stay round, not flatten.
Size checkpoint: the three pockets span 14.25 in (36.2 cm). The panel shows 2.5 in (6.4 cm) above the rims, plus the border.
Tabs:
1. Sew Rows 1–4 of each tab to the back of the panel over Rows 27–30, centered over sts 5–10, sts 30–35 and sts 55–60.
2. Sew a button to the front of the panel at Row 30, under each tab.
3. Slide the dowel through, fold each tab over it to the front, and button it.
If you’re using plastic canvas, slip it behind the panel before you sew the tabs on.
Final Blocking
- Lightly mist the holder with water.
- Stuff each pocket with a toilet roll or a rolled towel so it dries round.
- Pin the panel flat to 17 in x 9 in (43.2 cm x 22.9 cm).
- Square the corners with a ruler.
- Let it dry completely, then remove the pins.
Final Quality-Control Checklist
- [ ] The panel measures 17 in x 9 in (43.2 cm x 22.9 cm).
- [ ] Each pocket is 4.75 in (12.1 cm) across and holds a roll upright.
- [ ] The rims are even, with 60 rev sc each.
- [ ] Border counts were 196, then 204, and the corners are square.
- [ ] The snowmen are centered, with the hat tops on Rnd 27.
- [ ] Faces and buttons are secure, and the snowflakes are symmetrical.
- [ ] The tabs are evenly spaced and the buttons fasten easily.
- [ ] All ends are woven in.
Troubleshooting
- Pocket base cups or ripples: a cupped base means your tension is too tight; ripples mean it’s too loose. Recheck gauge on Rnd 10.
- Walls flare out: check that you have 60 sts. Rnd 11 must be worked in BLO.
- Border ruffles: skip one side row end per round.
- Border pulls in: add 1 sc on each side.
- Panel sags: add the plastic canvas insert.
- Pockets tip forward: extend the back seams upward through the rim rounds.
- Snowman puckers: take smaller whipstitches and don’t pull them tight.
- Tab is too long: move the button up one row.
Care
Hand wash in cool water, press out excess water, and dry flat with the pockets stuffed into shape. Remove the dowel before washing.

Final Notes
Here is the measurement chain from start to finish:
1. Gauge is 16 sts and 16 rows = 4 in (10.2 cm).
2. Each pocket base is a 60-stitch circle, 4.75 in (12.1 cm) across.
3. Walls rise to 5.5 in (14.0 cm) with the rim.
4. The panel is 64 sts x 32 rows, or 16 in x 8 in (40.6 cm x 20.3 cm).
5. Two border rounds (196, then 204 sts) bring it to 17 in x 9 in (43.2 cm x 22.9 cm).
6. Three pockets spaced 4.75 in (12.1 cm) apart fill 14.25 in (36.2 cm) of the front.
If you check each number along the way, the holder will hang straight. Happy crocheting!