Golden Meadow Dragonfly Curtain Panel Crochet Pattern

The Golden Meadow Dragonfly Curtain Panel is a cream honeycomb mesh curtain with mustard-gold dragonflies sewn on in two neat columns. The open hexagon net lets light through. The dragonflies have ladder-style wings that look a little like lace and a little like stained glass.

Cream is used for the mesh, the bottom picots and the hanging tabs. Warm mustard gold is used for the dragonflies and the top band. The finished curtain is airy and bright with a gentle vintage feel.

This pattern uses US crochet terms. One panel measures 24 in (61.0 cm) wide and 68 in (172.7 cm) long from the bottom picots to the top of the band. The tabs add a 3 in (7.6 cm) loop above that. The window in the photo has a pair, so make two panels for the same look.

You work the mesh in one piece from a picot foundation chain, then add the gold band and cream tabs straight onto the last row. Each dragonfly is made from six small pieces, which are layered and sewn onto the mesh.

Finished Size and Construction

  • Finished size: 24 in x 68 in (61.0 cm x 172.7 cm), plus 3 in (7.6 cm) tab loops
  • Skill level: Intermediate
  • Terminology: US
  • Yarn weight: DK / light worsted (#3) cotton
  • Hooks: 4.5 mm (US 7) for the mesh, band and tabs; 3.5 mm (US E/4) for the dragonflies
  • Number of pieces: 1 mesh panel plus 14 appliquéd dragonflies (84 small pieces)
  • Layout: 2 columns x 7 rows of dragonflies
  • Dragonfly size: 8.5 in (21.6 cm) wingspan x 4.5 in (11.4 cm) tall
  • Size before border: 24 in x 66 in (61.0 cm x 167.6 cm)
  • Border depth: 2 in (5.1 cm) top band, plus tabs

Materials

Choose a smooth mercerized or combed cotton. It keeps the mesh crisp, blocks well and resists stretching while it hangs. Avoid fuzzy yarns, because they blur the hexagons.

Per panel (double for a pair):

  • Cream: 150 g / approx. 338 m (mesh, picots, tabs)
  • Mustard gold: 120 g / approx. 270 m (dragonflies, band)

These quantities include a margin of about 20 percent.

Tools: 4.5 mm and 3.5 mm hooks, a tapestry needle, at least 14 stitch markers, rust-proof pins, a large blocking surface, a spray bottle and a measuring tape.

Abbreviations (US Terms)

  • ch: chain
  • sl st: slip stitch
  • sc: single crochet
  • hdc: half double crochet
  • dc: double crochet
  • tr: treble crochet
  • MR: magic ring
  • sp(s): space(s)
  • tch: turning chain
  • st(s): stitch(es)

Special stitches:

  • Cluster (cl): (sc, ch 1, sc) in the indicated st or loop. After blocking, the ch-1 opens into the short, flat top or bottom of a hexagon.
  • Picot: ch 4, sl st in 4th ch from hook.
  • Bobble (bob): [yarn over, insert hook in st, pull up a loop, yarn over, pull through 2 loops] 5 times in the same st, then yarn over and pull through all 6 loops.

Gauge and Checkpoints

Make one wing and a small mesh swatch before you start the panel.

  • Mesh (4.5 mm, blocked): 3 ch-7 loops = 6 in (15.2 cm) wide and 6 rows = 6 in (15.2 cm) tall. That makes each loop 2 in (5.1 cm) wide and each row 1 in (2.5 cm) tall.
  • Wing (3.5 mm, blocked): 4 in (10.2 cm) x 1.5 in (3.8 cm).
  • Band (4.5 mm): 16 sc = 4 in (10.2 cm).

Checkpoints:

  1. After Row 6: 24 in (61.0 cm) wide and 6 in (15.2 cm) tall, lightly stretched.
  2. After Row 34: 34 in (86.4 cm) tall.
  3. After Row 66: 66 in (167.6 cm) tall.
  4. After the band: 68 in (172.7 cm) long.

If your work is too big, go down half a hook size. If it’s too small, go up half a size. Change hooks rather than chain counts, because every count below depends on them.

Handmade golden dragonfly with lace-pattern wings and bobbled body on cream crochet grid.

Mesh Panel (Cream, 4.5 mm Hook)

The rows alternate between two types. A rows have 12 clusters. B rows have 12 full loops. The tr at each end of every row builds a firm, straight side edge.

Foundation: Picot, ch 7, picot 12 times. You now have 13 picots separated by 12 ch-7 segments. Rotate the work so the picots point down. They become the bottom edge.

Row 1 (A): Ch 4 (counts as tr), ch 3, cl in 4th ch of next ch-7 segment, ch 7, cl in 4th ch of next segment 11 times, ch 3, tr in base of first picot, turn.
Count: 12 cl, 11 ch-7 loops, 2 ch-3 sps, 2 tr.

Row 2 (B): Ch 4 (counts as tr), ch 7, skip ch-3 sp and next cl, cl in next ch-7 loop, ch 7, cl in next ch-7 loop 10 times, ch 7, tr in top of tch, turn.
Count: 11 cl, 12 ch-7 loops, 2 tr.

Row 3 (A): Ch 4 (counts as tr), ch 3, cl in first ch-7 loop, ch 7, cl in next ch-7 loop 11 times, ch 3, tr in top of tch, turn.
Count: 12 cl, 11 ch-7 loops, 2 ch-3 sps, 2 tr.

Rows 4–66: Repeat Rows 2 and 3 alternately. Even rows are B rows and odd rows are A rows, so Row 66 is a B row. Fasten off.

The mesh now measures 24 in x 66 in (61.0 cm x 167.6 cm).

Dragonflies (Gold, 3.5 mm Hook)

Make 14 dragonflies. Each one needs 4 wings, 1 abdomen and 1 thorax with eyes. Leave a 12 in (30.5 cm) tail on every piece for sewing.

Wing (make 4 per dragonfly)

Each wing is an open oval. Crossbars run out from a slim center rib to a smooth outline.

Ch 20.

Row 1 (first half): Sc in 2nd ch from hook, ch 1, skip 1 ch, hdc in next ch, [ch 1, skip 1 ch, dc in next ch] 6 times, ch 1, skip 1 ch, hdc in next ch, ch 1, skip 1 ch, sc in last ch.
Count: 10 posts (2 sc, 2 hdc, 6 dc), 9 ch-1 sps.

Row 2 (second half): Ch 1 and rotate. Working in the free loops on the other side of the foundation chain, sc in same ch as last sc, ch 1, skip 1 ch, hdc in next ch, [ch 1, skip 1 ch, dc in next ch] 6 times, ch 1, skip 1 ch, hdc in next ch, ch 1, skip 1 ch, sc in last ch.
Count: 10 posts, 9 ch-1 sps.

The posts on the two halves line up, so each pair reads as one crossbar. The foundation chain between them becomes the midrib.

Rnd 3 (outline): Ch 1. Working all the way around, sc in each post and each ch-1 sp, but work 2 sc in each of the 4 end sc. Join with a sl st.
Count: (20 posts + 18 ch-1 sps = 38 sc, 1 per st/sp) + 4 extra sc at the tips = 42 sc.

Fasten off. The wing measures 4 in x 1.5 in (10.2 cm x 3.8 cm).

Abdomen (make 1 per dragonfly)

Ch 16.

Rnd 1: Sc in 2nd ch from hook and next 13 ch, 3 sc in last ch. Working in the free loops on the other side, sc in next 13 ch, 2 sc in same ch as first sc. Join with a sl st.
Count: 14 + 3 + 13 + 2 = 32 sc.

This makes a strip 3.5 in (8.9 cm) long and 0.5 in (1.3 cm) wide. The two lines of stitches side by side give it a braided, segmented look.

Thorax and Eyes (make 1 per dragonfly)

Rnd 1: MR, ch 2 (doesn’t count as a st), 10 hdc in ring. Pull the ring closed and join with a sl st.
Count: 10 hdc. The thorax is 0.75 in (1.9 cm) across.

Eyes: Ch 1, (bob, ch 1, bob) in next hdc, sl st in next hdc. Fasten off.
Count: 2 bobbles side by side.

Make All Pieces

Per panel:

  • Cream: 1 mesh panel
  • Gold: 56 wings, 14 abdomens and 14 thoraxes with eyes

Before sewing, pin each wing to 4 in x 1.5 in (10.2 cm x 3.8 cm) and let it dry.

Placement grid: Each dragonfly is centered on a B-row cluster. The left column uses cluster 3 and the right column uses cluster 9, out of 11 clusters.

Row 58:  . . D . . . . . D . .
Row 50:  . . D . . . . . D . .
Row 42:  . . D . . . . . D . .
Row 34:  . . D . . . . . D . .
Row 26:  . . D . . . . . D . .
Row 18:  . . D . . . . . D . .
Row 10:  . . D . . . . . D . .

Clusters 3 and 9 sit 6 in (15.2 cm) in from the side edges, so the two columns are 12 in (30.5 cm) apart. The dragonflies are 8 in (20.3 cm) apart vertically. The lowest center is 10 in (25.4 cm) above the picots, and the highest center is 10 in (25.4 cm) below the top of the band.

Joining: Attaching the Dragonflies

Lay the mesh flat, right side up, and mark each center cluster.

  1. Wings first. Angle the upper pair about 10 degrees upward and the lower pair about 10 degrees downward. All four roots should meet at the marker. Whipstitch each root through the marked cluster. Then tack the outline to the mesh at the tip and wherever it crosses a cluster or tr. Catch only the back loops so the stitches stay hidden.
  2. Abdomen second. Center it so its top end overlaps the wing roots by 0.25 in (0.6 cm) and the rest hangs straight down. Sew it into every 3rd sc along both long edges.
  3. Thorax last. Place it over the abdomen and the wing roots, with the eyes at the top. Sew all the way around it. It hides every root join.

Tension: Sew loosely, because tight stitches pucker the hexagons. After each dragonfly, lift the panel and check that the mesh hangs flat behind it.

Size checkpoint: With all 14 dragonflies sewn on, the panel should still measure 24 in x 66 in (61.0 cm x 167.6 cm).

Border: Top Band and Tabs

The foundation picots already finish the bottom edge, and the tr columns finish the sides. The only border you need to add is along the top.

Border gauge: 16 sc = 4 in (10.2 cm) with a 4.5 mm hook.

Band Row 1 (gold, conversion row): With the right side facing, join gold in the top of the tch of Row 66. Ch 1, sc in same st, 7 sc in each ch-7 loop, 1 sc in the ch-1 sp of each cl, sc in last tr, turn.
Count: (12 loops x 7 = 84 sc) + (11 cl x 1 = 11 sc) + (2 edge sc) = 97 sc.

Band Row 2 (filet): Ch 4 (counts as dc and ch 1), skip 1 st, dc in next st, ch 1, skip 1 st, dc in next st across, turn.
Count: 49 dc, 48 ch-1 sps.

Band Row 3: Ch 4 (counts as dc and ch 1), dc in next dc, ch 1, dc in next dc across, working the last dc in the 3rd ch of the tch, turn.
Count: 49 dc, 48 ch-1 sps.

Band Row 4: Ch 1, sc in each dc and each ch-1 sp across. Fasten off.
Count: 49 + 48 = 97 sc.

Why the math works: 97 sc across 24 in (61.0 cm) is just over 4 sc per inch, which matches the border gauge. The band therefore lies flat without ruffling or pulling in. Because 97 is odd, both filet rows start and end on a dc, so the open squares are symmetrical.

Tabs (cream, make 8): On Band Row 4, place the tabs on sts 4–10, 16–22, 28–34, 40–46, 52–58, 64–70, 76–82 and 88–94. Check: 3 + (8 x 7) + (7 x 5) + 3 = 97.

  • Row 1: Join cream in the first st of the tab, ch 1, sc in same st and next 6 sts, turn. (7 sc)
  • Rows 2–24: Ch 1, sc in each st across, turn. (7 sc)

Each tab should measure 6 in (15.2 cm). Fold it to the back to make a 3 in (7.6 cm) loop and whipstitch the last row to the back of Band Row 1.

Final Blocking

  1. Weave in all ends along the tr columns or under the appliqués.
  2. Soak the panel in cool water for 10 minutes. Press the water out gently. Don’t wring it.
  3. Roll the panel in towels to remove most of the moisture.
  4. Lay it right side up and pin the corners to 24 in x 68 in (61.0 cm x 172.7 cm).
  5. Pin each bottom picot, spacing them 2 in (5.1 cm) apart.
  6. Straighten the side edges, then open the hexagons row by row so each cluster’s ch-1 lies flat.
  7. Smooth the wings flat and spritz them lightly.
  8. Let the panel dry completely before you unpin it.

Final Quality-Control Checklist

  • The mesh measures 24 in x 66 in (61.0 cm x 167.6 cm).
  • A rows have 12 clusters and B rows have 11.
  • All 13 picots are evenly spaced.
  • Every wing has 42 outline sc.
  • The 14 dragonflies are on Rows 10–58, at clusters 3 and 9.
  • Band Rows 1 and 4 each have 97 sc.
  • The 8 tabs are the same length and evenly spaced.
  • There is no puckering around the appliqués.

Troubleshooting

  • Edges narrower than the center: Your edge tr are too tight. Pull each one up a little taller.
  • Hexagons look like diamonds: Block again and pin each cluster’s ch-1 open.
  • Wings curl: Block them before sewing.
  • Band ruffles: Work 6 sc per loop instead of 7. That gives 72 sc 1-per-chain, plus 11 sc in the clusters and 2 edge sc, for 85 sc. Then work the filet rows with 43 dc.
  • Band pulls in: Go up one hook size for the band only.
  • Panel droops: Block it again and hang it from all 8 tabs evenly.

Care

Hand wash in cool water with a mild detergent and dry flat. Don’t tumble dry, and keep the curtain out of harsh direct sun for long periods so the gold doesn’t fade.

Cream-colored crocheted curtains with golden bow motifs hang on a window rod in a bright, modern home.

Final Notes

Every measurement in this pattern comes from one gauge. Each 2 in (5.1 cm) loop gives a 24 in (61.0 cm) row, and 66 rows at 1 in (2.5 cm) each give 66 in (167.6 cm) of mesh. The 97-sc band adds 2 in (5.1 cm), bringing the panel to 68 in (172.7 cm). The 4 in (10.2 cm) wings make 8.5 in (21.6 cm) dragonflies, spaced 8 in (20.3 cm) apart in columns 12 in (30.5 cm) apart. Check your gauge at each checkpoint and the panel will come out to size.

Happy crocheting!

Leave a Comment