This beaded curtain is built from simple openwork leaves that hang in long, swaying strands. Each leaf is made from raised, braid-like lines: a center vein, a smooth outline, and five pairs of side veins that rise toward the edge. Light passes through every open space, so the curtain filters a window instead of blocking it.
The palette alternates light periwinkle and royal blue strands, finished with natural wood beads and full tassels in matching colors. The look is calm, airy, and a little boho, and it works just as well in a doorway or as a wall hanging.
The finished curtain is about 39.5 in (100.3 cm) wide and 54 in (137.2 cm) long, with 9 strands of 5 leaves each. This pattern uses US crochet terms throughout.
Construction is straightforward. You crochet each leaf flat using only chains and slip stitches, add a corded edge, then link the leaves into strands with beaded chain links. A hanging loop goes at the top of each strand and a tassel at the bottom.
Finished Size and Construction
- Finished curtain: 39.5 in (100.3 cm) wide x 54 in (137.2 cm) long
- Skill level: Easy-Intermediate (only basic stitches, but careful counting)
- Terminology: US
- Yarn weight: Worsted (#4), cotton or cotton blend
- Hook: 5 mm (H-8)
- Number of pieces: 45 leaves and 9 tassels; the hangers and links are crocheted directly between pieces
- Layout: 9 strands, 5 leaves per strand, hung 4.5 in (11.4 cm) apart, center to center
- Piece size: leaf body 3.5 in (8.9 cm) wide x 6 in (15.2 cm) long; 7 in (17.8 cm) long including both small loops
- Size before border: about 3 in (7.6 cm) wide x 6 in (15.2 cm) long
- Border depth: about 0.25 in (0.6 cm) per side (one corded edge round)
Materials
Choose a smooth, firm worsted-weight cotton with clear stitch definition. Cotton holds the leaf shape and won’t stretch over time the way acrylic can in a hanging piece. The amounts below assume about 170 m per 100 g.
- Color A, light periwinkle: 250 g (approx. 425 m), for 25 leaves, 5 tassels, 5 hangers, and their links
- Color B, royal blue: 200 g (approx. 340 m), for 20 leaves, 4 tassels, 4 hangers, and their links
Quantities include a margin of about 15% for gauge swatches, tails, and fuller tassels.
Tools:
- 5 mm (H-8) crochet hook
- 60 natural wood beads, 12 mm (about 0.5 in), with holes of at least 4 mm (54 needed plus spares)
- Tapestry needle
- Bead threader or a loop of fine wire
- Stiff card, 6.5 in (16.5 cm) tall, for tassels
- Scissors, tape measure, rustproof pins, blocking mat, spray bottle
- Curtain rod at least 40 in (101.6 cm) wide, up to 1 in (2.5 cm) in diameter
- Stitch markers (2 per leaf while learning)
Abbreviations (US Terms)
- ch – chain
- sl st – slip stitch
- st(s) – stitch(es)
- bb – back bump of a chain (the horizontal bar on the underside)
- rep – repeat
Special stitches:
- Corded sl st: sl st in the bb of a chain. Worked along a chain, this creates the raised, braided line used for every vein and the edge. Keep these sl sts as loose as your chains.
- Bead lock (BL): slide one pre-strung bead up against the hook, then ch 1 around it. The bead sits snugly in that chain and cannot slide.
Gauge and Checkpoints
Gauge: 16 ch = 4 in (10.2 cm), measured relaxed. A corded sl st row worked back along those chains should measure the same.
Make one complete leaf before you start production, and check it at each stage:
- After the spine: 24 corded sl sts = 6 in (15.2 cm), not counting the loops.
- After both halves: the leaf is about 3 in (7.6 cm) wide x 6 in (15.2 cm) long and lies flat.
- After the border: 3.5 in (8.9 cm) wide x 6 in (15.2 cm) long, or 7 in (17.8 cm) including the loops.
If your leaf is too big, switch to a 4.5 mm hook. If it’s too small, switch to a 5.5 mm hook. If the length is right but the leaf cups or ruffles, it’s a vein-tension issue, not a gauge issue (see Troubleshooting).

Leaf Motif (Make 45)
Foundation and Spine
Ch 6, sl st in first ch to form a ring (top loop).
Ch 24 (spine chains).
Ch 6, sl st in first ch of this ch-6 to form a ring (bottom loop).
Spine: Working back up the spine chains, work 1 corded sl st in each of the 24 spine ch, ending at the base of the top loop. (24 sl sts)
For the rest of the leaf, spine sts are numbered 1 to 24 from the top. Spine st 1 sits next to the top loop, and spine st 24 sits next to the bottom loop. Place markers in spine sts 6 and 14 to help you count.
Checkpoint: spine 6 in (15.2 cm), loops about 0.5 in (1.3 cm) each.
Right Half (worked from top to tip)
Each vein is chained outward from the outline, attached to the spine, then corded back to the outline. Every vein lands on the spine lower than where it leaves the edge, which creates the upward chevron.
- Ch 4 (outline). Ch 4 (vein 1), sl st in spine st 6, corded sl st back in each of the 4 vein ch.
- Ch 4 (outline). Ch 6 (vein 2), sl st in spine st 10, corded sl st back in each of the 6 vein ch.
- Ch 4 (outline). Ch 7 (vein 3), sl st in spine st 14, corded sl st back in each of the 7 vein ch.
- Ch 4 (outline). Ch 7 (vein 4), sl st in spine st 18, corded sl st back in each of the 7 vein ch.
- Ch 4 (outline). Ch 6 (vein 5), sl st in spine st 22, corded sl st back in each of the 6 vein ch.
- Ch 8 (outline), sl st at the base of the bottom loop (leaf tip).
Right half count: 28 outline ch (4+4+4+4+4+8), 30 vein ch (4+6+7+7+6), 30 return sl sts, 5 spine joins + 1 tip join.
Left Half (worked from tip to top)
Work the mirror image, attaching each vein to the other leg of the same spine st as its partner.
- Ch 8 (outline). Ch 6 (vein 5), sl st in spine st 22, corded sl st back in each of the 6 vein ch.
- Ch 4 (outline). Ch 7 (vein 4), sl st in spine st 18, corded sl st back in each of the 7 vein ch.
- Ch 4 (outline). Ch 7 (vein 3), sl st in spine st 14, corded sl st back in each of the 7 vein ch.
- Ch 4 (outline). Ch 6 (vein 2), sl st in spine st 10, corded sl st back in each of the 6 vein ch.
- Ch 4 (outline). Ch 4 (vein 1), sl st in spine st 6, corded sl st back in each of the 4 vein ch.
- Ch 4 (outline), sl st at the base of the top loop.
Left half count: 28 outline ch (8+4+4+4+4+4), 30 vein ch, 30 return sl sts, 5 spine joins + 1 top join.
On both sides, the vein points sit 4, 8, 12, 16, and 20 outline ch from the top, so the two halves match exactly. Don’t fasten off. Go straight on to the Border (corded edge) below, then fasten off and weave in the ends.
Checkpoint: about 3 in (7.6 cm) wide x 6 in (15.2 cm) long, flat, with the veins angled upward.
Tassel (Make 9: 5 in A, 4 in B)
- Wrap yarn 40 times around the 6.5 in (16.5 cm) card.
- Slide a 12 in (30.5 cm) strand under all wraps at the top and knot it tightly. Leave the ends long. This is the hanging tie.
- Cut the wraps at the bottom.
- With a 12 in (30.5 cm) strand, wrap the neck 1 in (2.5 cm) below the top 6 times. Knot it and bury the ends inside the tassel.
- Trim to 6 in (15.2 cm).
Make All Pieces
- Color A: 25 leaves, 5 tassels
- Color B: 20 leaves, 4 tassels
Work the Border round on every leaf before joining. Strand layout, viewed from the front (A = periwinkle leaf, B = royal leaf):
Strand: 1 2 3 4 5 6 7 8 9
Leaf 1: A B A B A B A B A
Leaf 2: A B A B A B A B A
Leaf 3: A B A B A B A B A
Leaf 4: A B A B A B A B A
Leaf 5: A B A B A B A B A
Joining (Strand Assembly)
The leaves are joined with crocheted bead links. Each link attaches only to the leaf loops, so it never changes the leaf’s stitch counts.
Link (make 4 per strand, in the strand’s color): Thread 1 bead onto the yarn. Sl st through the bottom loop of the upper leaf. Ch 2, BL, ch 2, then sl st through the top loop of the next leaf. Fasten off.
Each link is 5 sts (2 ch + 1 BL + 2 ch) and measures 1.5 in (3.8 cm).
Hanger (1 per strand): Thread 1 bead onto the yarn. Ch 14, sl st in first ch to form the rod loop, which is 3.5 in (8.9 cm) around. Ch 12 (cord), BL, ch 2, sl st through the top loop of leaf 1. Fasten off. The hanger drops 5.5 in (14.0 cm) from the top of the rod to the leaf.
Tassel link (1 per strand): Thread 1 bead. Sl st through the bottom loop of leaf 5. Ch 2, BL, ch 2, and fasten off, leaving a 10 in (25.4 cm) tail. Tie this tail securely to the tassel’s hanging tie, then hide all the ends inside the tassel head. Including the knot, this link adds 1.5 in (3.8 cm).
Tension: Make every link chain at gauge. Tight links pucker the leaf loops, and loose links let the beads flop sideways.
Size checkpoint, per strand: 5.5 in hanger + 35 in leaves (5 x 7 in) + 6 in links (4 x 1.5 in) + 1.5 in tassel link + 6 in tassel = 54 in (137.2 cm). That is 14.0 cm + 88.9 cm + 15.2 cm + 3.8 cm + 15.2 cm, which totals 137.1 cm because of rounding.
Hanging: Slide strands 1 to 9 onto the rod in A-B order and space them 4.5 in (11.4 cm) apart, center to center. Width: 8 gaps x 4.5 in = 36 in (91.4 cm), plus one leaf width of 3.5 in (8.9 cm), gives 39.5 in (100.3 cm).
Border: Corded Leaf Edge
The border is a single round of corded sl sts worked around each leaf’s own outline. There is no border around the curtain as a whole, because the strands hang independently.
Border gauge: 4 corded sl sts = 1 in (2.5 cm), matching the chain gauge.
Round 1: Continue from the top of the leaf. Working down the left edge, work 1 corded sl st in each of the 28 left outline ch, then sl st in the tip. Working up the right edge, work 1 corded sl st in each of the 28 right outline ch, then sl st at the base of the top loop. Fasten off.
Count: 28 (left side) + 1 (tip) + 28 (right side) + 1 (top) = 58 sl sts.
Pass over the vein junctions without adding extra sts; the 28 per side already include every outline ch.
Why the math works: you work one sl st into each existing chain, so the edge keeps exactly the length of the outline. 28 sts ÷ 4 sts per in = 7 in (17.8 cm) per side, which is the curve length of a pointed oval 6 in (15.2 cm) long and about 3 in (7.6 cm) wide. The cord adds about 0.25 in (0.6 cm) per side, which brings the width to 3.5 in (8.9 cm).
Final Blocking
- Weave in all ends along corded lines, where they disappear.
- Lightly mist each leaf (or wet-block cotton fully and press out the water in a towel).
- Pin each leaf on the mat to 3.5 in (8.9 cm) x 6 in (15.2 cm). Pin the tip, the top, and each vein point first.
- Straighten the spine with a pin every 1 in (2.5 cm).
- Let it dry completely.
- Steam the tassels, comb them straight, and re-trim them to 6 in (15.2 cm).
- Hang the finished strands for 24 hours so the links settle and any twist relaxes.
Final Quality-Control Checklist
- 45 leaves: 25 in A, 20 in B
- Each leaf: 24 spine sts, 28 outline ch per side, 5 vein pairs, 58 border sts
- All veins angle upward, and the pairs meet on the same spine sts
- Each leaf measures 3.5 x 6 in (8.9 x 15.2 cm) and lies flat
- 6 beads per strand, all locked
- Each strand measures 54 in (137.2 cm)
- Strands alternate A-B-A, spaced 4.5 in (11.4 cm) apart
- No visible ends or loose knots
Troubleshooting
- Leaf cups or curls: The veins are too short or tight. Loosen the vein chains, or add 1 ch to veins 3 and 4.
- Outline ruffles: The outline chains are too loose. Go down a hook size for the outline only.
- Spine curves: The corded sl sts are tight. Pull up each loop slightly before completing it.
- Veins don’t match side to side: Recount the outline ch. The vein points must sit at 4, 8, 12, 16, and 20 ch on both sides.
- Beads slide or tilt: Skipped BL. Redo the link with a locking ch around the bead.
- Strands twist: Re-block, or hang for longer. A slightly heavier tassel also helps.
- Strands differ in length: Check that every hanger uses exactly ch 14 + ch 12.
Care
Hand wash in cool water, press out the water in a towel, then reblock and let dry flat. Dust the curtain occasionally by shaking each strand gently.

Final Notes
The whole curtain depends on one simple chain: 4 sts = 1 in (2.5 cm). That gives a 24-st spine of 6 in (15.2 cm), outlines of 28 sts at 7 in (17.8 cm), and finished leaves of 3.5 x 6 in (8.9 x 15.2 cm), or 7 in (17.8 cm) with loops. Five leaves, five beaded links, a hanger, and a tassel give each strand 54 in (137.2 cm). Nine strands spaced 4.5 in (11.4 cm) apart give a curtain 39.5 in (100.3 cm) wide. Check your first leaf carefully, and the other 44 will follow.
Happy crocheting!