Golden Shell Pine Tree Ornament Crochet Pattern

The Golden Shell Pine is a small, flat Christmas tree ornament. It has three tiers of fan shells in warm mustard yellow, a brown trunk in single crochet and a slim chain loop for hanging. The shells give it a lacy, old-fashioned look, and small diamond-shaped windows open between the tiers.

The palette is just two colors: golden yellow for the tree and soft brown for the trunk. The ornament looks good on a real tree, tied to a gift or hung in a window where light can shine through the openings.

This pattern uses US crochet terms. The finished ornament measures about 4.5 in (11.4 cm) wide and 3.8 in (9.7 cm) tall from the trunk to the top of the tree. With the hanging loop, it measures about 5.5 in (14.0 cm) tall.

The tree is worked flat in rows from the bottom up. You start with a row of chain loops, then work 3 shells, 2 shells and 1 shell. Each tier is anchored to the centers of the shells below it. Then you chain the hanging loop at the top, turn the piece over and work the trunk downward from the foundation chain. Nothing needs to be sewn on.

Finished Size and Construction

  • Finished size: 4.5 in (11.4 cm) wide × 3.8 in (9.7 cm) tall; 5.5 in (14.0 cm) tall with loop
  • Skill level: Easy / advanced beginner
  • Terminology: US crochet terms
  • Yarn weight: Worsted (#4), smooth cotton or cotton blend
  • Hook: 4.0 mm (US G-6)
  • Number of pieces: 1
  • Layout: Single piece with no joining; 3 shell tiers in a 3-2-1 stack, with the trunk centered below
  • Piece size: Tree body 4.5 in (11.4 cm) wide × 2.5 in (6.4 cm) tall; trunk 1.1 in (2.8 cm) wide × 1.3 in (3.3 cm) tall
  • Size before border: 4.5 in × 3.8 in (11.4 cm × 9.7 cm)
  • Border depth: 0 in (0 cm). The shell scallops form the finished edge, so no extra border rounds are added.

Materials

Choose a smooth, firmly plied cotton or cotton blend. Mercerized or matte cotton both work well. Cotton shows each shell clearly and holds a crisp shape after blocking. Avoid fuzzy or very stretchy yarn, because it blurs the openings between tiers.

  • Golden yellow (mustard): 12 g, about 24 m
  • Brown: 4 g, about 8 m

Both quantities include a margin of about 20% for your gauge swatch, joining tails and weaving in ends.

Tools:

  • 4.0 mm (US G-6) crochet hook
  • Tapestry needle
  • Scissors
  • 1 stitch marker
  • Rustproof pins and a foam blocking mat
  • Spray bottle with water
  • Optional: fabric stiffener or a light starch spray

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • dc – double crochet
  • sk – skip
  • sp(s) – space(s)
  • st(s) – stitch(es)
  • RS – right side
  • [ ] – repeat the instructions inside the brackets the stated number of times

Special stitch – Shell: Work 9 dc into the same stitch or space. The 5th dc is the center of the shell. Every upper tier is anchored to these center stitches.

Gauge and Checkpoints

Gauge: 9 sc and 9 rows = 2 in (5.1 cm), worked with a 4.0 mm hook. One finished 9-dc shell measures about 1.5 in (3.8 cm) wide and 0.6 in (1.5 cm) tall.

Gauge matters here only because it controls the size of the ornament and how crisp the shells look. Work Rows 1 and 2 first as your test. That is a complete bottom tier and takes only a few minutes.

Checkpoints:

  • After Row 1: The loop row measures 4.25 in (10.8 cm) long.
  • After Row 2: Tier 1 is 4.5 in (11.4 cm) wide and 0.9 in (2.3 cm) tall.
  • After Row 4: Tier 2 is 3 in (7.6 cm) wide, and the tree is 1.7 in (4.3 cm) tall.
  • After Row 6: Tier 3 is 1.5 in (3.8 cm) wide, and the tree is 2.5 in (6.4 cm) tall.
  • After the trunk: The trunk is 1.1 in × 1.3 in (2.8 cm × 3.3 cm), and the total height without the loop is 3.8 in (9.7 cm).

If your Row 1 is longer than 4.5 in (11.4 cm): Go down to a 3.75 mm (US F-5) hook. If it is shorter than 4 in (10.2 cm): Go up to a 4.5 mm (US 7) hook. If the shells ruffle, your dc are too loose for the space, so go down a hook size. If the shells cup, your dc are too tight, so go up a hook size.

Golden yellow crocheted headband with interlocking rope-braid pattern and tan cuff on wood.

Tier 1 (Bottom Tier)

Use golden yellow.

Row 1 (loop row): Ch 20. Sc in 2nd ch from hook. [Ch 2, sk next 2 ch, sc in next ch] 6 times. Turn.
Count: 7 sc and 6 ch-2 sps (19 sts across, counting each chain).

Check the math: 1 sc + 6 × (2 ch + 1 sc) = 19, which matches the 19 usable chains.

Row 2 (shell row): Ch 1. Sc in first sc. [Sk ch-2 sp, Shell in next sc, sk ch-2 sp, sc in next sc] 3 times. Turn.
Count: 3 shells and 4 sc (31 sts).

The shells sit in the 2nd, 4th and 6th sc of Row 1. The sc in the 1st, 3rd, 5th and 7th sc anchor the valleys between shells. Every shell should fan upward into a rounded scallop.

Check your size: tier 1 should be 4.5 in (11.4 cm) wide.

Tier 2 (Middle Tier)

Row 3 (bridge row): Ch 1. Sl st in first sc and in next 4 dc (5 sl sts), so you are now at the center of the first shell. Ch 1. Sc in next dc, which is the 5th dc and center of shell 1. [Ch 4, sc in the 5th (center) dc of next shell] twice. Turn. Leave the remaining stitches of shell 3 unworked.
Count: 3 sc and 2 ch-4 sps.

Each ch-4 bridge passes over the valley between two shells. The space left under each bridge becomes a diamond-shaped opening.

Row 4 (shell row): Ch 1. Sc in first sc. [Shell in next ch-4 sp, sc in next sc] twice. Turn.
Count: 2 shells and 3 sc (21 sts).

Each new shell fans out from directly above a valley in Tier 1, so the tiers interlock like pine boughs.

Check your size: tier 2 should be 3 in (7.6 cm) wide, and the tree should be 1.7 in (4.3 cm) tall.

Tier 3 (Top Tier)

Row 5 (bridge row): Ch 1. Sl st in first sc and in next 4 dc (5 sl sts). Ch 1. Sc in next dc, the center of shell 1. Ch 4. Sc in the 5th (center) dc of next shell. Turn.
Count: 2 sc and 1 ch-4 sp.

Row 6 (shell row): Ch 1. Sc in first sc. Shell in ch-4 sp. Sc in last sc. Turn.
Count: 1 shell and 2 sc (11 sts).

Check your size: tier 3 should be 1.5 in (3.8 cm) wide, and the tree body should be 2.5 in (6.4 cm) tall.

Hanging Loop

Loop row: Ch 1. Sl st in first sc and in next 4 dc (5 sl sts). Sl st in next dc, which is the 5th dc and center of the top shell (6 sl sts total). Ch 16. Sl st in the same center dc.

Fasten off, leaving a 4 in (10.2 cm) tail. The loop rises about 1.75 in (4.4 cm) above the top shell. For a longer loop, add 4 ch for every extra 0.5 in (1.3 cm) of height.

Trunk

Use brown. Turn the tree upside down with RS facing so you can see the free loops of the foundation chain from Row 1. Count the 19 foundation chains: the trunk uses chains 8 to 12, which leaves 7 chains free on each side and centers the trunk exactly.

Row 1: Sk the first 7 ch. Join brown with a sl st in the free loop of the 8th ch. Ch 1. Sc in the same ch and in each of the next 4 ch. Turn.
Count: 5 sc.

Rows 2–6: Ch 1. Sc in each sc across. Turn.
Count: 5 sc in each row.

Fasten off. The trunk should measure 1.1 in (2.8 cm) wide and 1.3 in (3.3 cm) tall: 5 sts ÷ 4.5 sts per in = 1.1 in, and 6 rows ÷ 4.5 rows per in = 1.3 in.

Border

This ornament has no separate border. The shell scallops already form a neat, finished edge, so the size before border and the final size are the same: 4.5 in × 3.8 in (11.4 cm × 9.7 cm).

The edge is shaped entirely by the counts above:

  • Bottom edge: 19 sts from Row 1, with the trunk worked into the center 5.
  • Each slanted side: Formed by the outer half-shells of Rows 2, 4 and 6. That is 4 dc from each shell on each side, plus the edge sc.
  • Top: The 5th dc of the single top shell, which holds the hanging loop.

Why the math works: Each bridge row starts and ends at a shell’s 5th dc, which is its exact center. So every tier is half a shell narrower on each side than the tier below it. Tier 1 holds 3 shells, Tier 2 holds 2 and Tier 3 holds 1, and each tier is exactly 1 shell narrower. That keeps the slanted sides straight and gives the widths 4.5 in, 3 in and 1.5 in (11.4 cm, 7.6 cm and 3.8 cm).

If you want a firmer outline, you can work an optional sl st edge in yellow along both slanted sides: 1 sl st in each dc and sc. Keep it loose, or the sides will pull in.

Final Blocking

  1. Weave in all ends along stitches of the same color: yellow tails into the shells, and the brown tail into the trunk.
  2. Lightly mist the ornament with water until it is damp but not dripping.
  3. Lay it RS up on the blocking mat.
  4. Pin the bottom edge straight to 4.5 in (11.4 cm).
  5. Pin the trunk square to 1.1 in × 1.3 in (2.8 cm × 3.3 cm).
  6. Gently open each shell into an even fan, and pin the top of each scallop.
  7. Open each diamond-shaped window with a pin placed through its center.
  8. Pin the loop straight up so that it dries without a twist.
  9. Optional: brush on fabric stiffener or spray starch for a crisper hanging shape.
  10. Let it dry completely before you remove the pins.

Final Quality-Control Checklist

  • [ ] Tiers hold 3, 2 and 1 shells, and every shell has 9 dc.
  • [ ] Each upper shell is centered over a valley in the tier below.
  • [ ] There are 3 even diamond-shaped openings between the tiers.
  • [ ] The trunk is 5 sc wide and 6 rows tall, centered on chains 8–12.
  • [ ] The loop is attached at the 5th dc of the top shell.
  • [ ] The ornament is 4.5 in (11.4 cm) wide and 3.8 in (9.7 cm) tall without the loop.
  • [ ] All ends are woven in, and none show on the RS.

Troubleshooting

  • The tree leans to one side. You probably slipped across too many or too few stitches at the start of a bridge row. Always work 5 sl sts, then sc in the 5th dc.
  • The shells ruffle. Your dc are loose for a 9-dc shell. Go down a hook size, or tighten each yarn-over.
  • The shells cup or curl. Your tension is too tight. Go up a hook size, and block with extra pins along the scallops.
  • The openings close up. The ch-4 bridges are too tight. Chain loosely, or work ch 5 in Rows 3 and 5.
  • The trunk is off-center. Recount the foundation chains: there must be 7 free chains on each side of the trunk.
  • The loop twists. Re-block it pinned straight, or work the ch more loosely.

Care

Hand wash in cool water with mild soap, press out the water in a towel, and reshape it flat to dry. If you used stiffener, refresh it after washing.

Mustard-yellow crocheted tree ornament with openwork pattern and brown trunk hanging from an evergreen branch on a decorated Christmas tree.

Final Notes

The size of this ornament follows one measurement chain. Gauge of 9 sc = 2 in (5.1 cm) gives a 4.25 in (10.8 cm) loop row. That row sets a 4.5 in (11.4 cm) Tier 1. Tier 2 is 3 in (7.6 cm) wide and Tier 3 is 1.5 in (3.8 cm) wide, for a 2.5 in (6.4 cm) tree body. The 1.3 in (3.3 cm) trunk brings the ornament to 3.8 in (9.7 cm), and the loop brings it to 5.5 in (14.0 cm). If you check your measurements at each step, every Golden Shell Pine will come out the same size, which helps if you make a set.

Happy crocheting!

Leave a Comment