Holly Lane Tree Magnet and Fridge Pocket Crochet Pattern

This holiday set adds a little cheer to the kitchen. It has a cream fridge pocket with a green scalloped rim and a hanging strap, plus four small Christmas tree motifs. One tree becomes a fridge magnet. The other three go inside the pocket so their gold stars show above the rim.

The colors are forest green, cream, chocolate brown, and gold. Each tree has a gold crocheted star on top, a brown trunk, and gold embroidery: two chain-stitch garlands and three small sparkle stars. The pocket front has one large gold star with a small star on each side.

The pattern uses US crochet terms. The pocket measures 6.4 in (16.3 cm) wide and 4.0 in (10.2 cm) tall. With the strap, it hangs about 6.5 in (16.5 cm) tall. Each tree measures 2.5 in (6.4 cm) wide and about 3.25 in (8.3 cm) tall, including the star and trunk.

You make every piece separately. The trees are worked flat from the bottom up, then edged and given a trunk. The pocket is worked in joined rounds around a foundation chain. It finishes with a cream rim and a green scallop round that folds down below the rim.

Finished Size and Construction

  • Pocket size: 6.4 in (16.3 cm) wide x 4.0 in (10.2 cm) tall
  • Tree size: 2.5 in (6.4 cm) wide x 3.25 in (8.3 cm) tall
  • Skill level: Easy
  • Terminology: US
  • Yarn weight: DK (light, #3)
  • Hook: 3.5 mm (E-4)
  • Number of pieces: 1 pocket, 1 strap, 4 trees, 4 stars, 1 magnet holder
  • Layout: the pieces are not joined to each other. Three trees sit loose in the pocket, and one tree is a stand-alone magnet.
  • Tree body before edging: 2.2 in (5.6 cm) wide x 2.0 in (5.1 cm) tall
  • Tree edging depth: about 0.2 in (0.5 cm) per side
  • Pocket body before rim: 21 rounds, 3.8 in (9.7 cm) tall
  • Rim depth: 1 round, about 0.2 in (0.5 cm). The scallops hang over the top 0.5 in (1.3 cm) of the body.

Materials

Use a smooth DK cotton or cotton blend. Cotton keeps its shape, shows the stitches clearly, and holds up to kitchen handling. A gold yarn with a light sparkle works best for the stars.

  • Cream: 20 g / 46 m (pocket, strap, magnet holder)
  • Forest green: 12 g / 28 m (trees, scallops)
  • Chocolate brown: 3 g / 7 m (trunks)
  • Gold: 5 g / 12 m (stars)
  • Gold metallic embroidery floss: 1 skein, about 8 m (garlands and sparkles)

These quantities include a margin of about 20 percent for your test piece and for weaving in ends.

Tools:

  • 3.5 mm (E-4) crochet hook
  • Tapestry needle and a sharp embroidery needle
  • 4 stitch markers
  • Scissors and straight pins
  • 1 round disc magnet, 1.25 in (3.2 cm) across and about 0.1 in (0.3 cm) thick
  • Optional: a small dab of fabric glue
  • Removable adhesive hook for hanging the pocket

Abbreviations (US Terms)

  • ch – chain
  • sl st – slip stitch
  • sc – single crochet
  • hdc – half double crochet
  • dc – double crochet
  • sc2tog – single crochet 2 together
  • sc3tog – single crochet 3 together
  • BLO / FLO – back loop only / front loop only
  • st(s) – stitch(es)

Special stitch – Scallop: 3 dc in the same stitch.

Gauge and Checkpoints

Gauge: 20 sc x 22 rows = 4 in (10.2 cm), worked flat or in rounds.

Make one tree first. It uses every main technique, so it also works as your gauge swatch.

  • Tree Row 1: 11 sc = 2.2 in (5.6 cm) wide
  • Tree Row 11: body is 2.0 in (5.1 cm) tall
  • Tree after edging: 2.5 in (6.4 cm) wide at the base
  • Pocket Rnd 1: 6.4 in (16.3 cm) wide when laid flat
  • Pocket Rnd 11: 2.0 in (5.1 cm) tall
  • Pocket Rnd 22: 4.0 in (10.2 cm) tall

If your tree is too big, go down to a 3.25 mm (D-3) hook. If it is too small, go up to a 3.75 mm (F-5) hook. Don’t change the stitch counts. The pocket is sized to hold three trees, so all the pieces need the same gauge.

A handmade green crocheted Christmas tree ornament with gold embroidered stars and wrapped garland.

Tree Motif (Make 4)

The tree is worked flat in rows from the base up. Turn at the end of each row. The ch 1 at the start of a row does not count as a stitch.

With green, ch 12.

  • Row 1: sc in 2nd ch from hook and in each ch across. (11 sts)
  • Row 2: ch 1, turn, sc in each st across. (11 sts)
  • Row 3: ch 1, turn, sc2tog, sc in next 7 sts, sc2tog. (9 sts)
  • Row 4: ch 1, turn, sc in each st across. (9 sts)
  • Row 5: ch 1, turn, sc2tog, sc in next 5 sts, sc2tog. (7 sts)
  • Row 6: ch 1, turn, sc in each st across. (7 sts)
  • Row 7: ch 1, turn, sc2tog, sc in next 3 sts, sc2tog. (5 sts)
  • Row 8: ch 1, turn, sc in each st across. (5 sts)
  • Row 9: ch 1, turn, sc2tog, sc in next st, sc2tog. (3 sts)
  • Row 10: ch 1, turn, sc in each st across. (3 sts)
  • Row 11: ch 1, turn, sc3tog. (1 st)

Do not fasten off. The body is now a triangle 2.2 in (5.6 cm) wide and 2.0 in (5.1 cm) tall.

Edging round: ch 1 and turn the piece to work down the left slanted side.

  1. Work 1 sc in each row end of Rows 10 through 1. (10 sc)
  2. Working in the free loops of the foundation chain, work 3 sc in the first loop, sc in the next 9 loops, and 3 sc in the last loop. (15 sc)
  3. Work 1 sc in each row end of Rows 1 through 10 up the right side. (10 sc)
  4. Work 3 sc in the Row 11 st at the tip. (3 sc)
  5. Sl st to the first sc and fasten off.

Total: 38 sts (10 + 15 + 10 + 3).

The edging gives the tree a clean outline and brings it to 2.5 in (6.4 cm) wide.

Trunk: Turn the tree upside down with the right side facing you. Count the 15 sts across the bottom edge and join brown in the 7th st.

  • Row 1: ch 1, sc in the same st and in the next 2 sts. (3 sts)
  • Rows 2–3: ch 1, turn, sc in each st. (3 sts)

Fasten off. The trunk is 0.6 in (1.5 cm) wide and 0.5 in (1.3 cm) long, centered under the tree.

Star Topper (Make 4)

With gold, make a magic ring.

  • Rnd 1: ch 1, 5 sc in ring, sl st to first sc. (5 sts)
  • Rnd 2: ch 3, sl st in 2nd ch from hook, hdc in next ch, sl st in next sc of Rnd 1. Repeat from * 4 more times. (5 points)

Fasten off and leave a 6 in (15.2 cm) tail. The star measures about 0.9 in (2.3 cm) across.

Magnet Holder (Make 1)

With cream, ch 20. Sl st to the first ch to form a ring, taking care not to twist the chain.

  • Rnd 1: ch 1, sc in each ch around, sl st to first sc. (20 sts)
  • Rnd 2: ch 1, sc in next 3 sts, sc2tog. Repeat from * 3 more times, then sl st to first sc. (16 sts)

Fasten off and leave a 12 in (30.5 cm) tail. Rnd 1 is a wall that sits against the tree. Rnd 2 pulls in to form a lip that holds the edge of the magnet and leaves its face exposed.

Pocket (Make 1)

The pocket is worked in joined rounds without turning. Place a marker in the first st of each round.

With cream, ch 33.

  • Rnd 1: sc in 2nd ch from hook and in each ch across (32 sc). Turn the work and sc in each free loop along the underside of the chain (32 sc). Sl st to first sc. (64 sts: 32 front + 32 back)
  • Rnds 2–21: ch 1, sc in each st around, sl st to first sc. (64 sts)

Do not fasten off. The body is 6.4 in (16.3 cm) wide and 3.8 in (9.7 cm) tall. Stitch 1 of each round sits on a side fold. Sts 1–32 form the front and sts 33–64 form the back.

Make All Pieces

  • Green: 4 tree bodies with edging, plus the pocket scallop round
  • Brown: 4 trunks
  • Gold: 4 stars
  • Cream: 1 pocket, 1 strap, 1 magnet holder

Strap: With cream, ch 36. Sc in 2nd ch from hook and in each ch across (35 sts). Don’t turn. Sl st in each free loop along the underside of the chain (35 sl sts). Fasten off and leave an 8 in (20.3 cm) tail at each end. The strap is 7.0 in (17.8 cm) long and firm like a cord.

Pocket front layout (trees left to right):

   *        *        *        <- gold stars on trees
  [T1]     [T2]     [T3]      <- trees, overlapping about 0.4 in (1.0 cm)
==========================    <- cream rim + green scallops
|    +       *       +    |   <- small star, large star, small star
|_________________________|

Joining and Assembly

You attach the pieces by sewing. They are never joined into one piece of fabric.

Stars: Pin each star with its center over the tree tip and its two lower points resting on the green. Use the gold tail to whipstitch through Rnd 1 of the star and the 3 tip sts of the edging. Keep the stitches snug but not tight so the points stay flat.

Magnet holder: Do this on one tree only. Center the holder on the wrong side of the tree, with its lower edge level with the bottom edging and Rnd 2 facing away from the tree. Whipstitch the base of Rnd 1 to the wrong side, 1 stitch per holder st (20 stitches), catching only the back layer of the tree. Leave the last 4 sts open, slide the magnet in under the lip, and sew the gap closed. Add a dab of glue if you like.

Strap: On the back face of the pocket, mark sts 41 and 56 of Rnd 21. Each one is the 9th st from a side fold, which leaves 14 sts, or 2.8 in (7.1 cm), between them. Sew each strap end to the inside of the back face over Rnds 19–21, about 0.5 in (1.3 cm) deep. Go through both the strap and the pocket at every stitch so the weight is spread evenly.

Tree embroidery: With gold floss, work two garlands in chain stitch. Run the first from the left edge at Row 3 to the right edge at Row 6, letting it dip slightly in the middle. Run the second from the right edge at Row 7 to the left edge at Row 9. Add three sparkle stars, each 0.4 in (1.0 cm) across and made of 4 straight stitches that cross at the center. Place one at Row 2 left of center, one at Row 5 right of center, and one at Row 8 in the center.

Pocket embroidery: Center a large 8-point star, 1.25 in (3.2 cm) across, between Rnds 6 and 13 of the front. Work a 6-point star 0.75 in (1.9 cm) across on each side, 1.5 in (3.8 cm) from the center and on the same rows. Slip a piece of card inside the pocket while you stitch so you don’t catch the back layer.

Checkpoint: When the pocket hangs from the strap, the loop rises about 2.5 in (6.4 cm) above the rim. The total hanging height is about 6.5 in (16.5 cm).

Border

The pocket border is a two-step rim. The border gauge matches the body gauge: 5 sts per 1 in (2.5 cm).

Continue from Rnd 21 with cream.

  • Rnd 22 (rim): ch 1, sc in BLO of each st around, sl st to first sc. Fasten off. (64 sts: 32 front + 32 back)

This round leaves an unworked front loop on every st of Rnd 21. It also adds the last 0.2 in (0.5 cm) of height, which brings the pocket to 4.0 in (10.2 cm).

  • Scallop round: Hold the pocket with the rim upright. Join green with a sl st in the FLO of st 64 of Rnd 21. sc in FLO of next st, skip 1 st, Scallop in FLO of next st, skip 1 st. Repeat from * 15 more times so the last repeat ends on st 64. Sl st to the first sc and fasten off. (16 Scallops + 16 sc: 8 Scallops and 8 sc on each face)

Fold the scallops down so they hang over the top of the body, just below the cream rim.

Why the math works: Each scallop repeat uses 4 sts. Each face has 32 sts, and 32 ÷ 4 = 8, so every face gets 8 whole scallops. The sc of each repeat lands on sts 1, 5, 9, and so on, so one sc sits on each side fold (sts 1 and 33) and no scallop wraps around a side. The rim keeps all 64 sts, so the opening stays 6.4 in (16.3 cm) wide and doesn’t flare.

Final Blocking

  1. Lightly mist each tree and the pocket with water.
  2. Pin each tree to a foam board 2.5 in (6.4 cm) wide, with straight slanted edges and a sharp tip.
  3. Pin the pocket flat, 6.4 in (16.3 cm) wide and 4.0 in (10.2 cm) tall.
  4. Pin the scallops so they lie evenly below the rim.
  5. Let everything dry completely, about 6 hours.
  6. Block the magnet tree before you put the magnet in.

Final Quality-Control Checklist

  • Each tree body has 11 rows and a 38-st edging.
  • Each trunk is 3 sts wide and centered on the 15-st bottom edge.
  • Each star is centered on its tip and has 5 even points.
  • The pocket has 22 rounds with 64 sts in every round.
  • There are 8 scallops on the front and 8 on the back.
  • The strap ends are 14 sts apart and sewn to the inside back face.
  • The magnet is held by the holder lip and sits flat.
  • All ends are woven in for at least 1 in (2.5 cm).

Troubleshooting

  • Tree edges curl: The edging is too tight. Go up one hook size for the edging round only.
  • Tree leans: A decrease was missed at one end. Check the stitch counts on Rows 3, 5, 7, and 9.
  • Pocket twists: Join each round with a sl st and keep stitch 1 on the side fold.
  • Scallops ruffle: Your dc are too loose. Use a hook one size smaller for that round.
  • Magnet slips out: Rnd 2 of the holder is too loose. Remake it with a smaller hook or add glue.
  • Pocket sags on the hook: Reinforce the strap ends with a second round of sewing.

Care

Spot clean with a damp cloth and mild soap, then lay flat to dry. Don’t machine wash, and take the magnet tree off the fridge before cleaning it.

White crocheted tote bag with green star-adorned Christmas trees and gold garland hanging on a neutral wall.

Final Notes

The measurements build on each other. A gauge of 20 sc x 22 rows = 4 in (10.2 cm) gives a tree body 2.2 in (5.6 cm) wide and 2.0 in (5.1 cm) tall. The 38-st edging brings the tree to 2.5 in (6.4 cm) wide, and the trunk and star bring it to 3.25 in (8.3 cm) tall. The 64-st pocket lies 6.4 in (16.3 cm) wide, and 22 rounds make it 4.0 in (10.2 cm) tall. The 4-st scallop repeat fits each 32-st face exactly. Check each stage and your trees will sit neatly in their pocket.

Happy crocheting!

Leave a Comment